Tfs810.doc version 1.2 VI TELEFILTER 16.02.2003 Development Specification TFS 810 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedances: for input: for output: 23 C 0 dBm * 200 200 Characteristics Remark: Reference level for the relative attenuation arel of the TFS810 is the minimum of the pass band attenuation amin. The minimum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 810 MHz without any tolerance or limit. The values of relative attenuation arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss ae = amin - Nominal frequency fN - Pass band PB - Amplitude ripple within PB Relative attenuation arel 801,5 MHz ... 660 760 830 860 MHz MHz MHz MHz Group delay … ... ... … tolerance/limit max. 4,0 dB 810,0 MHz fN 8,5 MHz - max. 1 dB 818,5 MHz - max. 1,0 dB 760 790 860 960 - min. min. min. min. 45,0 15,5 15,5 45,0 dB dB dB dB - max. 100 ns - max. 75 0 °C ...+ 70 ns °C - -40 C …+ 80 C MHz MHz MHz MHz mean value in PB Group delay ripple within PB Operating temperature range Storage temperature range Temperature coefficient of frequency TCf** T.B.D. - *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team. **) fc(Hz) = Tcf(ppm/K) x (T - TA)2 x fCTA (MHz) generated: checked / approved: TELE FILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs810.doc version 1.2 VI TELEFILTER 16.02.2003 Development Specification TFS 810 2/5 Construction and pin configuration (All dimensions in mm) 5 6 4 Date code: Year+week 810 R43 R39 date code 1 0,1 2 1 0,6 6 3 3 N P R ... Pin Pin Pin Pin Pin Pin 2001 2002 2003 1 2 3 4 5 6 Input Ground Output Output Ground Input 4 0,6 TELE FILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs810.doc version 1.2 VI TELEFILTER 16.02.2003 Development Specification TFS 810 3/5 Stability Characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page 4 Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer 9000 min 300 mm min 500 mm min 300 mm EMBOSSED CARRIER TAPE Tape (all dimensions in mm) W Po Do E F G (min) P2 P1 D1(min) Ao Bo CT : : : : : : : : : : : : 8 ± 0,3 4 ± 0,1 1,5 + 0,1 1,75 ± 0,1 3,5 ± 0,05 0,75 2 ± 0,05 4 ± 0,1 1,5 3,25 ± 0,1 3,25 ± 0,1 5,5 ± 0,2 Do Po P2 E Ao F D1 CT W Bo G P1 COVER TAPE W2 Reel (all dimensions in mm): A W1 : 330 : 8,4 + 2,0 W2 (m ax) : 14,4 N (m in) : C : 50 13 A +0,5/ -0,2 C N W 1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right. TELE FILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs810.doc version 1.2 VI TELEFILTER 16.02.2003 Development Specification TFS 810 4/5 Air reflow temperature conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods main-heating periods 150 °C - 170 °C over 200 °C 60 sec. - 90 sec. 20 sec. - 25 sec. peak temperature 255 °C ± 5 °C Chip-mount air reflow profile 260 240 220 200 temperature / °C 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time / sec. Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / °C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / °C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 TELE FILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Tfs810.doc version 1.2 VI TELEFILTER Development Specification 16.02.2003 TFS 810 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Roizengaft 16.10.2003 1.1 - Change absolute attenuation to relative attenuation Roizengaft 21.10.2003 1.2 - Add reference for relative attenuation. - Write relative attenuation instead of bandwidth values, - change of package marking Roizengaft 16.12.2003 TELE FILTER GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.