COILCRAFT 0603CS

Document 195-1
Chip Inductors – 0603CS (1608)
100
90
70
Q factor
12 nH
33 nH
80
68 nH
60
120
110
100
3.9 nH
90
80
70
60
50
40
30
25°C
Typical Q vs Frequency
Irms Derating
Percent of rated Irms
Ultra-small size, exceptional Q and high SRFs
make these inductors ideal for high frequency
applications where size is at a premium. They
also have excellent DCR and current carrying
characteristics.
20
10
270 nH
0
50
-40
40
-20
0
20
40
20
D
F
10
A
10
100
1000
10000
Frequency (MHz)
E
terminal
Typical L vs Frequency
120 140
H
Pick and
place
material
I
J
F
I
Recommended
Land Pattern
Terminal wraparound:
approx 0.007/0,18 both ends
F
G
H
IJ
0.0710.0440.0400.0150.0300.0130.0340.0400.0250.025inches
1,801,121,020,380,760,330,861,020,640,64
mm
270 nH
350
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
300
Inductance (nH)
100
G
ABCD
maxmaxmax ref E
400
250
200
120 nH
150
68 nH
100
33 nH
50
0
80
C
B
overall
30
0
60
Ambient temperature (°C)
120 nH
12 nH
3.9 nH
10
100
1000
Frequency (MHz)
10000
Core material Ceramic
Environmental RoHS compliant, halogen free optional
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 3.2 – 3.7 mg
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 per 7″ reel Paper tape: 8 mm wide, 1.0 mm thick,
4 mm pocket spacing
PCB washing Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
[email protected]
subject to change without notice.
US +1-847-639-6400
Please check [email protected]
our website for latest information.
UK +44-1236-730595
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 195-1 Revised 05/02/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 195-2
0603CS Series (1608)
Designer’s Kits C324A and B contain 10 each of all 5% values
Designer’s Kits C324A-2 and B-2 contain 10 each of all 2% values
SRFDCR
1.7 GHz min5 max6 Inductance2 PercentQ 900 MHz
Irms7Color
tolerance3 min4 L typ Q typ
Part number1(nH)
L typ Q typ (GHz) (Ohms) (mA) dot
0603CS-1N6XJL_
0603CS-1N8XJL_
0603CS-2N2XJL_
0603CS-3N3X_L_
0603CS-3N6X_L_
0603CS-3N9X_L_
0603CS-4N3X_L_
0603CS-4N7X_L_
0603CS-5N1X_L_
0603CS-5N6X_L_
0603CS-6N8X_L_
0603CS-7N5X_L_
0603CS-8N2X_L_
0603CS-8N7X_L_
0603CS-9N5X_L_
0603CS-10NX_L_
0603CS-11NX_L_
0603CS-12NX_L_
0603CS-15NX_L_
0603CS-16NX_L_
0603CS-18NX_L_
0603CS-22NX_L_
0603CS-23NX_L_
0603CS-24NX_L_
0603CS-27NX_L_
0603CS-30NX_L_
0603CS-33NX_L_
0603CS-36NX_L_
0603CS-39NX_L_
0603CS-43NX_L_
0603CS-47NX_L_
0603CS-51NX_L_
0603CS-56NX_L_
0603CS-68NX_L_
0603CS-72NX_L_
0603CS-82NX_L_
0603CS-R10X_L_
0603CS-R11X_L_
0603CS-R12X_L_
0603CS-R15X_L_
0603CS-R18X_L_
0603CS-R20X_L_
0603CS-R21X_L_
0603CS-R22X_L_
0603CS-R25X_L_
0603CS-R27X_L_
0603CS-R33X_L_
0603CS-R39X_L_
1.6@ 250 MHz
1.8@ 250 MHz
2.2@ 250 MHz
3.3@ 250 MHz
3.6@ 250 MHz
3.9@ 250 MHz
4.3@ 250 MHz
4.7@ 250 MHz
5.1@ 250 MHz
5.6@ 250 MHz
6.8@ 250 MHz
7.5@ 250 MHz
8.2@ 250 MHz
8.7@ 250 MHz
9.5@ 250 MHz
10@ 250 MHz
11@ 250 MHz
12@ 250 MHz
15@ 250 MHz
16@ 250 MHz
18@ 250 MHz
22@ 250 MHz
23@ 250 MHz
24@ 250 MHz
27@ 250 MHz
30@ 250 MHz
33@ 250 MHz
36@ 250 MHz
39@ 250 MHz
43@ 250 MHz
47@ 200 MHz
51@ 200 MHz
56@ 200 MHz
68@ 200 MHz
72@ 150 MHz
82@ 150 MHz
100@ 150 MHz
110@ 150 MHz
120@ 150 MHz
150@ 150 MHz
180@ 100 MHz
200@ 100 MHz
210@ 100 MHz
220@ 100 MHz
250@ 100 MHz
270@ 100 MHz
330@ 100 MHz
390@ 100 MHz
5
5
5
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
5,3,2
24
1.6749
1.6563 12.5
0.030 700 Red
16
1.8335
1.8650 12.5
0.045 700 Black
13
2.2231
2.2444 12.5
0.250 100 Yellow
35
3.3175
3.3888
5.90 0.045 700 Blue
22
3.7253
3.7165
5.90 0.063 700 Red
22
3.9549
3.9667
6.90 0.080 700 Brown
22
4.3250
4.3370
5.90 0.063 700 Orange
20
4.7247
4.7557
5.80 0.116 700 Violet
20
4.9347
4.9556
5.70 0.140 700 Green
26
5.7763
6.0580
4.76 0.075 700 Black
27
6.7560
7.1081
5.80 0.110 700 Red
28
7.7060
7.8265
4.80 0.106 700 Brown
30
8.2582
8.3787
4.20 0.115 700 Orange
28
8.8662
9.3258
4.60 0.109 700 Yellow
28
9.7 59
9.9261
5.40 0.135 700 Blue
31 10.066 10.683 4.80 0.130 700Orange
30 11.053 11.556 4.00 0.130 700 Gray
35 12.372 13.583 4.00 0.130 700Yellow
35 15.464 16.889 4.00 0.170 700Green
34 16.255 17.352 3.30 0.170 700White
35 18.770 21.469 3.10 0.170 700 Blue
38 22.873 26.171 3.00 0.190 700Violet
38 24.171 28.067 2.85 0.190 700Orange
36 24.545 28.739 2.65 0.190 700Black
40 29.274 34.665 2.80 0.220 600 Gray
37 31.447 39.928 2.25 0.220 600Brown
40 36.067 49.542 2.30 0.220 600White
37 39.447 52.724 2.08 0.250 600 Red
40 42.760 60.240 2.20 0.250 600Black
38 47.044 64.921 2.00 0.280 600Orange
38 52.262 77.235 2.00 0.280 600Brown
35 55.569 82.234 1.90 0.270 600 Blue
38 62.556 97.026 1.90 0.310 600 Red
37 80.5 54 168 21 1.70 0.340 600Orange
34 82.0 53 135 20 1.70 0.490 400Yellow
34 96.2 54 177 21 1.70 0.540 400Green
34124 49
— — 1.40 0.580 400 Blue
32138 43
— — 1.35 0.610 300Violet
32166 39
— — 1.30 0.650 300 Gray
28 250 25
— — 0.9900.920 280 White
25 305 22
— — 0.9901.25 240 Black
25—— ——0.900
1.98200
Green
27—— ——0.895
2.06200
Gray
25—— ——0.900
2.10200
Brown
25—— ——0.822
3.55120
Violet
26—— ——0.830
2.16170
Red
25—— ——0.900
3.89100
Blue
25—— ——0.780
4.35100
Yellow
1. When ordering, specify tolerance, termination and packaging codes:
0603CS-R39XJLW
Tolerance: G=2% H = 3% J = 5%
(Table shows stock tolerances in bold.)
Termination:L=RoHS compliant silver-palladium-platinum-glass frit.
E=Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:W
=7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel).
U=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286 impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at the same frequency as inductance using an Agilent/
HP 4291A with an Agilent/HP 16193 test fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
[email protected]
subject to change without notice.
US +1-847-639-6400
Please check [email protected]
our website for latest information.
UK +44-1236-730595
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 195-2 Revised 05/02/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.