COILCRAFT 0603HP

Document 537 -1
Chip Inductors – 0603HP Series (1608)
160
10 nH
120
Q Factor
120
110
100
90
80
70
60
50
40
30
25°C
Typical Q vs Frequency
140
Current Derating
Percent of rated Irms
•Higher Q and lower DCR than other 0603 inductors
•Highest SRF values – as high as 16 GHz
•Excellent current handling capability – up to 2100 mA
•54 inductance values from 1.8 to 390 nH
20
100
24 nH
80
10
0
51 nH
60
330 nH
40
-40
0
20
40
0
100
1000
10000
A
Frequency (MHz)
Typical L vs Frequency
E
terminal
1000
D
150 nH
1000
Frequency (MHz)
I
J
F
I
Recommended
Land Pattern
Terminal wraparound:
approx 0.01/0,24 both ends
E
F
G
H
I
J
1,75 0,86 – 1,090,94 0,380,740,33 0,961,020,690,71mm
51 nH
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
Core material Ceramic
1
100
H
Pick and
place
material
82 nH
10 nH
10
120 140
0.069 0.034 – 0.0430.037 0.0150.0290.013 0.0380.0400.0270.028inches
24 nH
10
100
G
A BC max (min – max)max D
330 nH
100
80
C
B
overall
F
10
60
Ambient temperature (°C)
20
Inductance (nH)
-20
82 nH
150 nH
10000
Environmental RoHS compliant, halogen free optional
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 2.0 – 3.2 mg
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 per 7″ reel. Paper tape: 8 mm wide, 1 mm thick,
4 mm pocket spacing
PCB washing Only pure water or alcohol recommended
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 537-1 Revised 05/02/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Document 537-2
0603HP Series (1608)
Designer’s Kits C406A and B contain 10 each of all 5% values
Designer’s Kits C406A-2 and B-2 contain 10 each of all 2% values
L test Q typ SRF
DCR
max5 Irms6Color
Inductance2Percent freq
at 900 MHz 1.7 GHz typ4
Part number1
(nH)
tol
(MHz) 250 MHz L typ Q typ3
L typ Q typ3 (GHz)(Ohms)(mA) code
0603HP-1N8XJL_
1.8
5
250
23
1.77
40
1.77
65
16.0
0.033 2100 Black
0603HP-2N2XJL_
2.2
5
250
13
2.14
25
2.12
35
15.0
0.180
900 Yellow
0603HP-3N3X_L_
3.3
5,3,2
250
32
3.28
67
3.32 104
9.60 0.024 1900 Blue
0603HP-3N6X_L_
3.6
5,3,2
250
40
3.59
70
3.62 116
9.70 0.031 1900 Red
0603HP-3N9X_L_
3.9
5,3,2
250
35
3.88
68
3.95 108
7.50 0.039 1600 Brown
0603HP-4N3X_L_
4.3
5,3,2
250
30
4.29
58
4.31
91
7.50 0.080 1300 Orange
0603HP-4N7X_L_
4.7
5,3,2
250
26
4.65
48
4.71
75
7.90 0.100 1100 Violet
0603HP-5N1X_L_
5.1
5,3,2
250
40
5.08
84
5.12 140
8.90 0.036 1700 Green
0603HP-5N6X_L_
5.6
5,3,2
250
48
5.60
87
5.73 145
6.60 0.036 1700 Black
0603HP-6N0X_L_
6.0
5,3,2
250
49
5.92
94
6.12 154
6.00 0.036 1700 White
0603HP-6N8X_L_
6.8
5,3,2
250
42
6.83
88
7.05 143
5.80 0.042 1400 Red
0603HP-7N2X_L_
7.2
5,3,2
250
48
7.25
96
7.38 139
5.40 0.052 1400 Green
0603HP-7N5X_L_
7.5
5,3,2
250
41
7.55
81
7.85 112
5.30 0.080 1300 Brown
0603HP-8N2X_L_
8.2
5,3,2
250
46
8.21
96
8.39 148
5.90 0.054 1400 Orange
0603HP-8N7X_L_
8.7
5,3,2
250
46
8.73
97
9.00 149
5.50 0.054 1400 Yellow
0603HP-9N1X_L_
9.1
5,3,2
250
40
9.18
76
9.64 109
5.10 0.037 1400 Black
0603HP-9N5X_L_
9.5
5,3,2
250
49
9.56
98
9.99 149
4.90 0.053 1400 Blue
0603HP-10NX_L_ 10
5,3,2
250
49
10.16
90
10.64 142
4.30 0.048 1400 Orange
0603HP-11NX_L_ 11
5,3,2
250
41
11.06
78
11.82 108
4.10 0.042 1400 Gray
0603HP-12NX_L_ 12
5,3,2
250
37
12.26
69
13.20
91
4.10 0.088 1100 Yellow
0603HP-15NX_L_ 15
5,3,2
250
48
15.41
83
17.20 124
3.60 0.078 1200 Green
0603HP-16NX_L_ 16
5,3,2
250
45
16.37
77
18.70 116
3.50 0.085 1100 White
0603HP-18NX_L_ 18
5,3,2
250
41
18.56
76
20.90 100
3.30 0.066 1200 Blue
0603HP-22NX_L_ 22
5,3,2
250
44
22.7
77
25.90
88
3.15 0.140
850 Violet
0603HP-23NX_L_ 23
5,3,2
250
40
24.0
69
29.53
80
3.00 0.150
850 Orange
0603HP-24NX_L_ 24
5,3,2
250
42
24.9
77
28.90
91
2.95 0.074 1100 Black
0603HP-27NX_L_ 27
5,3,2
250
44
28.4
74
34.00
84
2.80 0.150
780 Gray
0603HP-30NX_L_ 30
5,3,2
250
49
31.5
82
37.90
82
2.80 0.130
920 Brown
0603HP-33NX_L_ 33
5,3,2
250
45
34.9
76
42.90
80
2.70 0.170
680 White
0603HP-36NX_L_ 36
5,3,2
250
44
38.5
69
50.00
64
2.50 0.225
720 Red
0603HP-39NX_L_ 39
5,3,2
250
48
41.5
78
51.90
74
2.45 0.19
680 Black
0603HP-43NX_L_ 43
5,3,2
250
45
45.7
83
58.10
76
2.45 0.17
810 Orange
0603HP-47NX_L_ 47
5,3,2
200
47
50.6
77
66.90
72
2.30 0.24
680 Brown
0603HP-51NX_L_ 51
5,3,2
200
49
54.6
73
71.30
62
2.30 0.28
660 Blue
0603HP-56NX_L_ 56
5,3,2
200
50
60.3
74
79.90
56
2.20 0.30
610 Red
0603HP-68NX_L_ 68
5,3,2
200
46
75.5
73
113.3
49
2.00 0.33
600 Orange
0603HP-72NX_L_ 72
5,3,2
150
46
80.8
69
—
—
1.90 0.42
550 Yellow
0603HP-75NX_L_ 75
5,3,2
150
46
84.6
71
—
—
1.90 0.52
500 Violet
0603HP-82NX_L_ 82
5,3,2
150
45
94.0
62
—
—
1.80 0.46
510 Green
0603HP-91NX_L_ 91
5,3,2
150
45
103.0
64
—
—
1.65 0.58
440 White
0603HP-R10X_L_ 100
5,3,2
150
49
114.0
69
—
—
1.70 0.54
470 Blue
0603HP-R11X_L_ 110
5,3,2
150
47
126.2
63
—
—
1.60 0.58
440 Violet
0603HP-R12X_L_ 120
5,3,2
150
47
142.4
61
—
—
1.55 0.72
420 Gray
0603HP-R15X_L_ 150
5,3,2
150
47
188.8
57
—
—
1.35 0.82
390 White
0603HP-R18X_L_ 180
5,3,2
100
48
232.2
50
—
—
1.30 1.50
310 Black
0603HP-R20X_L_ 200
5,3,2
100
47
265.0
47
—
—
1.25 2.00
280 Green
0603HP-R21X_L_ 210
5,3,2
100
48
288.0
45
—
—
1.20 2.00
280 Gray
0603HP-R22X_L_ 220
5,3,2
100
47
315.0
41
—
—
1.10 2.00
280 Brown
0603HP-R25X_L_ 250
5,3,2
100
45
—
—
—
—
1.05 3.00
240 Violet
0603HP-R27X_L_ 270
5,3,2
100
46
—
—
—
—
1.05 2.25
260 Red
0603HP-R30X_L_ 300
5,3,2
100
47
—
—
—
—
0.99 2.80
220 Green
0603HP-R33X_L_ 330
5,3,2
100
46
—
—
—
—
0.93 3.60
180 Blue
0603HP-R36X_L_ 360
5,3,2
100
47
—
—
—
—
0.93 4.00
170 Gray
0603HP-R39X_L_ 390
5,3,2
100
47
—
—
—
—
0.88 4.00
170 Yellow
1. When ordering, please specify tolerance, termination and packaging codes:
0603HP-R39XJLW
Tolerance: G = 2% H = 3% J = 5%
(Table shows stock tolerances in bold.)
Termination:L = RoHS compliant silver-palladium-platinum-glass frit.
E = Halogen free component. RoHS compliant silver-palladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging:W
=7″ machine-ready reel. EIA-481 punched paper tape
(2000 parts per full reel).
U = Less than full reel. In tape, but not machine ready. To
have a leader and trailer added ($25 charge), use code
letter W instead.
2. Inductance tested at listed frequency using an Agilent/HP 4286A impedance
analyzer with a Coilcraft SMD-A fixture and Coilcraft-provided correlation
pieces.
3. Q measured using an Agilent/HP 16197 test fixture in an Agilent/HP 4291
impedance analyzer.
4. SRF measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture.
5. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture.
6. Current that causes a 15°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 537-2 Revised 05/02/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.