0603 COMMON MODE CHOKES Common Mode Chokes for Critical Applications • Designed for high-speed USB 3.0, HDMI, SATA, IEEE1394 and LVDS applications. • Supports data rates up to 4.8 Gbit/s. • Miniature EIA 0603 footprint; only 1.17 mm tall • Most values provide >15 dB common mode attenuation and >100 ohms impedance. Core material Ferrite Terminations Gold over nickel over silver-palladium-glass frit. Other terminations available at additional cost Weight 4.9 – 5.2 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +105°C with derated current Storage temperature Component: –55°C to +105°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Packaging 2000 per 7″reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth Common mode Common mode impedance typ (Ohms)attenuation typ (dB) Part number1 100 MHz 500 MHz 1 GHz 100 MHz 500 MHz 1 GHz CP312FRA251MAZ 25 44 CP312FRA601MAZ 60 99 CP312FRA951MAZ 95 156 CP312FRA142MAZ 145 242 CP312FRA222MAZ 225 384 64 142 234 353 592 Inductance2 DCR min (nH) 1.31 3.16 8.45 18 3.00 6.8813.27 37 4.62 9.7516.06 63 6.8512.8018.16 98 9.1416.5320.29 150 1. When ordering, please specify termination and testing codes: CP312FRA222MAZ Termination:A=RoHS compliant gold over nickel over silver-palladiumglass frit Special order: C=Tin-lead over gold over nickel over silver-palladiumglass frit F =Tin-silver-copper over gold over nickel over silverpalladium-glass frit Testing:Z =COTS H=Screening per Coilcraft CP-SA-10001 2. Inductance measured at 100 MHz using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. 3. DCR is specified per winding. 4. Current per winding that causes a 20°C rise from 25°C ambient. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 0.077 0.109 0.142 0.174 0.209 0.069 max 1,75 0.046 max 1,17 250500 250 500 250 500 250 500 250 500 1 2 4 3 0.004 0,10 0.013 0.034 0,86 0,33 1 0.023 0,58 0.030 0,73 2 1 3 4 0.010 0,25 2 0.040 max 1,02 4 3 0.010 0,25 inches Dimensions are in mm Suggested Land Pattern 0.012 0,30 Document CP406-1 Revised 07/11/12 ® © Coilcraft, Inc. 2012 max3 Isolation Irms4 (Ohms) (Vrms) (mA) 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. Document 406-2 0603 Common Mode Choke — CP312FRA Typical differential mode attenuation (Ref: 50 Ohms) 0 Attenuation (dB) 1 2 3 -251 -601 -951 -142 -222 4 5 6 1 10 100 1000 10000 Frequency (MHz) Typical common mode attenuation (Ref: 50 Ohms) 0 Attenuation (dB) 5 10 -251 -601 -951 -142 -222 15 20 25 30 1 10 100 1000 10000 Frequency (MHz) Typical impedance vs frequency 1000 -222 -142 -951 -601 Impedance (Ohms) 100 -251 10 1 0.1 1 10 100 1000 10000 Frequency (MHz) Document CP406-2 Revised 07/11/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.