COILCRAFT DO1813H

Document 207-1
SMT Power Inductors – DO1813H Series
• High-current power inductance; up to 14 A saturating current
• Rugged self-leaded construction for reliable soldering
Designer’s Kit C331 contains 3 of each part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Weight 278 – 315 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000 per 13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 5.4 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
L
L typ DCR SRF
ref ±20%2max
typ Isat3 Irms4
Part number1 (µH) (µH) (Ohms)(MHz) (A) (A)
DO1813H-181ML_0.18 0.180.003 800
14.010.0
DO1813H-331ML_ 0.33 0.33 0.004 60010.0 7.0
DO1813H-561ML_0.56 0.560.010 2007.7 6.0
DO1813H-122ML_1.2 1.150.017 1405.3 4.4
DO1813H-222ML_2.2 2.060.035 1003.5 3.1
DO1813H-332ML_3.3 3.200.040 803.0 2.7
DO1813H-472ML_4.7 4.700.054 502.6 2.2
DO1813H-682ML_6.8 6.800.080 452.2 1.8
DO1813H-822ML_8.2 8.200.092 422.0 1.6
DO1813H-103ML_10.0
9.55 0.11
40 1.9 1.5
DO1813H-153ML_
15.015.30.17 30
1.51.2
DO1813H-223ML_
22.022.60.25 25
1.21.0
DO1813H-333ML_33.0 32.5 0.35
20 0.99 0.82
DO1813H-473ML_47.0 48.1 0.47
15 0.87 0.72
1. When ordering, please specify termination and packaging codes:
DO1813H-473MLD
Termination:L=RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging:D = 13″ machine-ready reel. EIA-481 embossed plastic
tape, 1000 parts per full reel.
B = Less than full reel. In tape, but not machine-ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Inductance tested at 0.25 Vrms, 100 kHz, 0 Adc.
3. DC current at which the inductance drops 30% (typ) from its value
without current.
4. Current that causes a 40°C temperature rise from 25°C ambient.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 207-1 Revised 10/08/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 207-2
SMT Power Inductors - DO1813H Series
Typical L vs Frequency
Typical L vs Current
Irms Derating
Internal code
0.240
6,10 max
110
XXX
X
120
Dash number
0.075
1,91
0.160
4,06
See
note
90
0.275
6,98
0.090
2.29
0.350 max
8,89
80
70
Recommended
Land Pattern
0.180 dia
4,57
60
50
40
0.197
max
5,0
25°C
Percent of rated Irms
100
30
20
10
0
-40
-20
0
20
40
60
80
100
120 140
0.050
max
1,27
0.230 typ
5,84
Dimensions are in
inches
mm
Note:
0.080 ±0.010
body
2,03 ±0,25
0.100
leads, based on -561
2,54
Ambient temperature (°C)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 207-2 Revised 10/08/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.