Document 186-1 Shielded Power Inductors – DS1608C These shielded inductors can help achieve significantly longer battery life in handheld devices and other portable products. They offer high efficiency and small size. Their flat top and heat resistant materials ensure trouble-free assembly and reflow operations. For new designs, consider the MSS7341, MSS1038 or LPS4018 as alternatives to this series. These series are more cost effective and offer better current handling. In addition, the LPS4018 is a significantly smaller part. We will continue to manufacture and support the DS1608C indefinitely. DCRSRF Part L ±20%2 maxtyp Isat3 number1 (µH) Q min (Ohms) (MHz) (A) DS1608C-102ML_ 1.030 @ 200 kHz 0.040 250 1.4 DS1608C-152ML_ 1.530 @ 200 kHz 0.045 125 0.93 DS1608C-222ML_ 2.240 @ 200 kHz 0.050 120 0.92 DS1608C-332ML_ 3.340 @ 200 kHz 0.055 120 0.75 DS1608C-472ML_ 4.740 @ 200 kHz 0.060 105 0.58 DS1608C-682ML_ 6.840 @ 200 kHz 0.065 50 0.58 DS1608C-822ML_ 8.240 @ 200 kHz 0.070 42 0.47 DS1608C-103ML_1040 @ 200 kHz 0.075 38 0.37 DS1608C-153ML_1540 @ 100 kHz 0.090 33 0.31 DS1608C-223ML_ 22 40 @ 100 kHz 0.11 25 0.30 DS1608C-333ML_ 33 40 @ 100 kHz 0.19 20 0.30 DS1608C-473ML_ 47 40 @ 100 kHz 0.23 20 0.24 DS1608C-683ML_ 68 40 @ 100 kHz 0.29 15 0.17 DS1608C-104ML_ 100 40 @ 100 kHz 0.48 10 0.13 DS1608C-154ML_ 150 40 @ 100 kHz 0.59 9 0.10 DS1608C-224ML_ 220 40 @ 100 kHz 0.77 6 0.10 DS1608C-334ML_ 330 40 @ 100 kHz 1.4 5 0.07 DS1608C-474ML_ 470 40 @ 100 kHz 1.8 4 0.06 DS1608C-684ML_ 680 40 @ 100 kHz 2.2 3 0.055 DS1608C-105ML_ 1000 40 @ 100 kHz 3.4 2 0.045 DS1608C-155ML_ 1500 50 @ 100 kHz 4.2 2 0.035 DS1608C-225ML_ 2200 50 @ 100 kHz 8.5 2 0.028 DS1608C-335ML_ 3300 50 @ 100 kHz 11.0 1 0.024 DS1608C-475ML_ 4700 50 @ 100 kHz 13.9 1 0.021 DS1608C-685ML_ 6800 50 @ 100 kHz 25.0 1 0.019 DS1608C-106ML_10000 50 @ 100 kHz 32.8 0.8 0.017 1. When ordering, please specify termination and packaging codes: DS1608C-106MLC Termination:L=RoHS compliant gold over nickel over moly-manganese Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape (2500 parts per full reel). 2. Inductance tested at 0.1 Vrms, 100 kHz, 0 Adc. 3. DC current at which the inductance drops 30% (typ.) from its value without current. 4. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Ferrite Terminations RoHS compliant gold over nickel over moly-manganese. Other terminations available at additional cost. Weight 144 – 167 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.28 mm thick, 4 mm pocket spacing, 3 mm pocket depth PCB washing Only pure water or alcohol recommended US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 186-1 Revised 09/20/07 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information. Document 186-2 Shielded Power Inductors – DS1608 Typical L vs Frequency Typical L vs Current 100000 100000 10000 µH 10000 1000 µH 100 µH 100 10 µH 10 1 µH 1 0.1 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 10000 µH 10000 100 µH 100 10 µH 10 1 µH 1 0.1 0.01 1 0.1 10 Frequency (MHz) 0.01 0.1 Current (A) 1 10 0.115 max 2,92 0.260 max 6,60 0.070 1,78 Recommended Land Pattern 0.175 max 4,45 0.160 4,06 0.055 1,40 0.050 1,27 0.140 3,56 0.090 2,29 0.170 min 4,32 0.270 6,86 0.040 1,02 Dash number XXX Part marking since Feb. 2005. Parts manufactured prior to that date may have color dots. Visit www.coilcraft.com/colrpowr.cfm for details. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 186-2 Revised 09/20/07 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information.