COILCRAFT EPL2014

Document 583-1
Shielded Power Inductors – EPL2014
• Extremely low DCR and very high SRF ratings
•Isat ratings as high as 2.8 A
Designer’s Kit C413 contains 5 each of all values
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations Since March, 2009: RoHS compliant tin-silver-copper
over tin over nickel over silver-platinum. Prior to March, 2009: RoHS
compliant tin‑silver-copper over gold over nickel over silver-platinum.
Weight 20 – 25 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.28 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Part number1
Inductance2
±20% (µH)
DCR (Ohms)3
nom max
Isat (A)
typ4
(MHz)
10% drop 20% drop 30% drop
SRF
5
EPL2014-271ML_0.27 0.030 0.036 570
1.502.302.80
EPL2014-301ML_ This part number has been changed to EPL2014-271. The EPL2014-301 is not available
EPL2014-421ML_0.42 0.037 0.044 438
1.402.002.40
EPL2014-471ML_ This part number has been changed to EPL2014-421. The EPL2014-471 is not available
EPL2014-601ML_0.60 0.043 0.052 290
1.201.802.25
EPL2014-821ML_ 0.82
0.051 0.061 163
0.9501.40 1.75
EPL2014-102ML_ 1.0
0.059 0.071 153
0.9001.30 1.68
EPL2014-152ML_ 1.5
0.075 0.086 109
0.7201.20 1.60
EPL2014-222ML_ 2.2
0.120 0.132
80
0.600 0.9801.30
EPL2014-332ML_ 3.3
0.152 0.167
62
0.5400.8001.10
EPL2014-472ML_ 4.7
0.231 0.254
46
0.3800.6500.880
EPL2014-682ML_ 6.8
0.287 0.316
44
0.3500.5900.800
EPL2014-822ML_ 8.2
0.378 0.416
39
0.2900.5000.680
EPL2014-103ML_10
0.440 0.459
33
0.2500.4500.600
1. When ordering, please specify termination and packaging codes:
EPL2014-103MLC
Termination:L = RoHS compliant tin-silver-copper over tin over nickel
Special order, added cost: S = non-RoHS tin-lead
(63/37).
Packaging:C
=7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
Irms (A)6
20°C rise 40°C rise
2.042.73
1.932.57
1.832.43
1.49 2.03
1.43 1.94
1.34 1.86
1.07 1.42
0.9231.23
0.7881.06
0.6760.915
0.6400.849
0.5640.729
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at which the inductance drops from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 583-1 Revised 10/28/09
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 583-2
SMT Power Inductors – EPL2014 Series
Typical L vs Current
Typical L vs Frequency
100
10 µH
10
Inductance (µH)
Inductance (µH)
100
3.3 µH
1.0 µH
1
10 µH
10
3.3 µH
1.0 µH
1
0.3 µH
0.1
0.01
0.1
0.3 µH
Current (A)
1
10
0.1
0.1
1
Current Derating
100
2nd
significant
digit
Multiplier
120
110
0.079 ±0.008
2,0 ±0,2
100
90
Part Marking
0.079 ±0.008
2,0 ±0,2
80
70
1st
significant
digit
60
50
0.057
max
1,45
40
30
20
10
0
25°C
Percent of rated current
10
Frequency (MHz)
Isat
Irms
-40
-20
Start
Recommended
Land Pattern
Finish
0.057
1,45
0.030 max
0,75
0
20
40
60
80
100
120 140
Ambient temperature (°C)
0.069
max
1,75
0.087
2,2
Part Marking (Parts manufactured prior to Oct. 20, 2009 may not be marked.)
Part number
EPL2014-271
EPL2014-421
EPL2014-601
EPL2014-821
EPL2014-102
EPL2014-152
EPL2014-222
EPL2014-332
EPL2014-472
EPL2014-682
EPL2014-822
EPL2014-103
Value
0.27 µH
0.42 µH
0.60 µH
0.82 µH
1.0 µH
1.5 µH
2.2 µH
3.3 µH
4.7 µH
6.8 µH
8.2 µH
10 µH
1st digit
Red
Yellow
Blue
Gray
Brown
Brown
Red
Orange
Yellow
Blue
Gray
Brown
2nd digit
Violet
Red
Black
Red Black
Green
Red
Orange
Violet Gray
Red
Black
Multiplier
Brown
Brown
Brown
Brown
Red
Red
Red
Red
Red
Red
Red
Orange
0.014
min
0,35
Dimensions are in
0.041
1,04
inches
mm
Small surface blemishes are not unusual and do not adversely affect performance.
Wire may be visible inside the voids.
Acceptable void sizes:
Top: 0.01 in / 0,254 mm × 0.01 in / 0,254 mm
Sides: 0.02 in / 0,5 mm × 0.047 in / 1,2 mm
Note: All marked parts have three dots. Black dot, used only on -601, -102 and
‑103 as second significant digit, may be very difficult to see.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 583-2 Revised 10/28/09
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.