5015 POWER INDUCTORS High-Reliability Power Inductors ML432PJB ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Core material Ferrite Terminations Silver-palladium-platinum-glass frit Weight 102 – 107 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 1000/7″reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm Inductance2 Part number1 ±20% (µH) ML432PJB102MLZ 1.0 ML432PJB132MLZ 1.3 ML432PJB182MLZ 1.8 ML432PJB222MLZ 2.2 ML432PJB332MLZ 3.3 ML432PJB472MLZ 4.7 ML432PJB562MLZ 5.6 ML432PJB682MLZ 6.8 ML432PJB822MLZ 8.2 ML432PJB103MLZ 10 ML432PJB123MLZ 12 ML432PJB153MLZ 15 ML432PJB183MLZ 18 ML432PJB223MLZ 22 ML432PJB333MLZ 33 ML432PJB473MLZ 47 ML432PJB563MLZ 56 ML432PJB683MLZ 68 ML432PJB104MLZ 100 ML432PJB124MLZ 120 ML432PJB154MLZ 150 ML432PJB224MLZ 220 ML432PJB334MLZ 330 ML432PJB474MLZ 470 ML432PJB564MLZ 560 ML432PJB684MLZ 680 ML432PJB105MLZ 1000 ML432PJB155MLZ 1500 ML432PJB185MLZ 1800 ML432PJB225MLZ 2200 ML432PJB335MLZ 3300 ML432PJB475MLZ 4700 Isat (A)5 Irms (A)6 DCR 4 3 SRF (MHz) max 10% 20% 30% 20°C 40°C (Ohms) min typ drop drop drop rise rise 0.050 128 183 3.63.83.91.52.1 0.065 105 150 2.52.62.81.41.9 0.07589 128 2.62.82.91.21.7 0.09081 116 2.42.62.71.11.6 0.1256188 1.92.02.01.01.4 0.1505173 1.61.71.81.01.3 0.1754667 1.61.61.60.88 1.2 0.2254057 1.31.41.50.72 1.0 0.2803449 1.31.31.40.68 0.84 0.3003144 1.21.31.30.64 0.76 0.3502840 1.01.11.20.60 0.67 0.360 27 38 0.800.840.860.580.67 0.550 24 35 0.750.770.800.560.66 0.675 22 31 0.700.730.750.480.66 0.750 17.024 0.550.590.600.400.56 1.00 12.618 0.460.480.490.360.46 1.13 12.017 0.400.430.450.320.42 1.45 10.515 0.330.380.390.280.38 1.95 8.412 0.300.330.340.240.34 2.50 7.010 0.250.280.300.220.30 3.40 6.5 9.3 0.230.250.260.200.26 4.50 5.1 7.3 0.200.210.220.180.23 7.40 4.0 5.7 0.150.170.180.140.18 7.50 3.4 4.9 0.120.120.130.130.17 8.50 3.0 4.3 0.100.110.120.110.15 10.6 2.8 4.0 0.100.110.110.100.14 15.0 2.2 3.2 0.0800.0900.0930.0800.12 25.0 1.7 2.5 0.0800.0860.0880.0700.11 28.0 1.5 2.2 0.0780.0830.0860.0700.10 36.0 1.5 2.1 0.0720.0780.0800.0500.070 55.0 1.2 1.7 0.0640.0720.0760.0450.060 80.0 1.0 1.4 0.0620.0690.0720.0350.050 ® ML432PJB475MLZ Testing:Z =COTS H =Screening per Coilcraft CPSA-10001 N =Screening per Coilcraft CPSA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. Typical DC current that causes the specified inductance drop from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. These parts are preproduction products for electrical evaluation only. Document ML585-1 Revised 07/19/11 Specification subject to change without notice. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 1. When ordering, please specify testing code: Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com 5015 POWER INDUCTORS ML432PJB Series (5015) Typical L vs Frequency Typical L vs Current 10000 10000 3300 µH 3300 µH 1000 µH 330 µH 100 µH 100 33 µH 10 µH 10 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 330 µH 100 µH 100 33 µH 10 µH 10 3.3 µH 3.3 µH 1 0.01 1 0.1 10 Frequency (MHz) 1 0.01 0.1 Current (A) 1 10 Typical Current Derating 120 100 90 80 70 60 50 40 25°C Percent of rated current 110 30 20 Isat Irms 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Dimensions are in ® These parts are preproduction products for electrical evaluation only. Document ML585-2 Revised 12/06/10 Specification subject to change without notice. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 inches mm Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com