COILCRAFT MLC1255

Document 327-1
Shielded Power Inductors MLC12xx/15xx
• Soft saturation makes them ideal for VRD/VRM applications
• Special materials eliminate all thermal aging issues.
Designer’s Kit C387 contains samples of all values
Core material Iron
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS tin-silver over copper. Other terminations
available at additional cost.
Weight MLC12xx 1.91 – 3.04 g; MLC15xx 2.73 – 5.12 g
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature:The part may be operated without
damage as long its temperature (ambient + self-heating) does not
exceed +125°C.
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Part number1
Inductance2
±20% (µH)
DCR (mOhm)
typ max
SRF typ3
(MHz)
Isat (A)4
10% drop 20% drop
Irms (A)5Height
20°C rise 40°C rise
max (mm)
10.5 mm × 11.x mm body size (see next page for 13.2 mm × 14.x mm body size)
MLC1265-361ML_ 0.36
0.93
1.03 234 26.942.6
MLC1260-401ML_ 0.40
0.93
1.03 228 21.035.2
MLC1255-421ML_ 0.42
0.93
1.03 219 21.134.5
MLC1240-451ML_ 0.45
1.73
1.91 198 16.524.9
16.522.7
16.321.9
16.824.1
12.819.8
6.5
6.1
5.6
4.1
MLC1265-701ML_ 0.70
MLC1250-801ML_ 0.80
MLC1240-901ML_ 0.90
MLC1260-122ML_ 1.20
MLC1255-122ML_ 1.20
15.221.0
12.417.3
11.916.3
12.317.6
12.417.5
6.5
5.1
4.1
6.1
5.6
1.24
1.37
2.35
2.59
2.57
2.83
2.38
2.62
2.38
2.62
134
151
108
93
85
16.427.5
13.321.7
13.922.8
14.023.3
14.122.4
MLC1250-132ML_ 1.30
2.38
2.62
76 10.817.7 11.716.5 5.3
MLC1245-152ML_ 1.50
4.08
4.49
79 10.717.3 10.314.2 4.6
MLC1260-172ML_ 1.75
2.84
3.13
72 12.119.2 10.915.3 6.1
MLC1245-402ML_
4.00 8.18
9.00 46 7.42
11.86.9
9.84.8
1. When ordering, please specify termination and packaging codes:
MLC1245-402MLC
Termination:L=RoHS compliant tin-silver over copper.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA‑481 embossed plastic tape.
B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D
=13″ machine-ready reel. EIA‑481 embossed plastic tape. Factory order only, not stocked.
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft SMD­‑A fixture in an Agilent/HP 4284A LCR meter.
3. SRF measured using an Agilent/HP4291A impedance analyzer and a Coilcraft 16193 fixture.
4. DC current at which the inductance drops the specified amount from its value without current.
5. Current that causes the specified temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 327-1 Revised 04/19/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 327-2
Shielded Power Inductors – MLC12xx/15xx Series
Part number1
Inductance2
±20% (µH)
DCR (mOhm)
typ max
SRF typ3
(MHz)
Isat (A)4
10% drop 20% drop
Irms (A)5Height
20°C rise 40°C rise
max (mm)
13.2 mm × 14.x mm body size (see previous page for 10.5 mm × 11.x mm body size)
MLC1565-451ML_ 0.45
0.864
0.951 158 32.854.0
MLC1565-501ML_ 0.50
0.864
0.951 132 21.338.1
MLC1555-551ML_ 0.55
1.34
1.48 165 20.835.7
MLC1565-801ML_ 0.80
1.20
1.32
93 27.447.4
18.025.6
18.626.9
16.122.3
17.424.6
6.5
6.5
5.6
6.5
MLC1560-901ML_ 0.90
MLC1538-102ML_ 1.0
MLC1550-102ML_ 1.0
MLC1565-142ML_ 1.4
MLC1538-152ML_ 1.5
1.72
1.90
3.46
3.81
1.72
1.90
2.20
2.42
4.36
4.80
101
81
76
77
50
17.828.7
13.621.2
16.127.3
18.930.1
13.421.0
14.620.6
11.516.7
13.919.7
13.719.9
10.614.6
6.0
3.9
5.2
6.5
3.9
MLC1565-202ML_ 2.0
MLC1550-252ML_ 2.5
MLC1565-282ML_ 2.8
MLC1555-302ML_ 3.0
MLC1565-372ML_ 3.7
3.47
3.82
3.43
3.74
4.10
4.51
4.06
4.47
3.10
3.40
64
45
44
42
47
15.224.2
10.917.7
13.722.3
11.118.1
8.1313.63
11.616.3
11.515.8
10.715.2
10.915.6
12.1716.58
6.5
5.2
6.5
5.6
6.5
MLC1550-452ML_ 4.5
MLC1565-472ML_ 4.7
MLC1565-602ML_
6.0
MLC1565-732ML_
7.3
MLC1565-922ML_
9.2
7.13
7.85
4.00
4.40
5.50
6.05
7.20
7.92
9.70
10.60
36
39
34
29
25
7.1211.8
8.4311.7
5.2
6.2310.57 10.9815.57 6.5
5.60
9.579.27
13.626.5
5.10
8.608.60
12.016.5
4.57
7.807.19
10.186.5
21
19
17
4.077.03 6.879.46 6.5
3.936.70 6.128.65 6.5
3.435.77 5.637.75 6.5
MLC1565-113ML_11.3
MLC1565-133ML_13.0
MLC1565-153ML_15.4
10.60
11.60
12.57
13.75
16.40
18.00
1. When ordering, please specify termination and packaging codes:
MLC1565-153MLC
Termination:L=RoHS compliant tin-silver over copper.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA‑481 embossed plastic
tape.
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D
=13″ machine-ready reel. EIA‑481 embossed plastic
tape. Factory order only, not stocked.
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft
SMD­‑A fixture in an Agilent/HP 4284A LCR meter.
3. SRF measured using an Agilent/HP4291A impedance analyzer and a
Coilcraft 16193 fixture.
4. DC current at which the inductance drops the specified amount from its
value without current.
5. Current that causes the specified temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Tape and Reel (24 mm wide plastic tape)
Quantity
Tape thickness
Pocket
Pocket
7″ reel 13″ reel
(mm)
spacing (mm) depth (mm)
MLC1240
250
900
0,35
16
4,45
MLC1245
200
800
0,35
16
4,95
MLC1250
200
700
0,40
16
5,45
MLC1255
200
700
0,40
16
5,95
MLC1260
175
600
0,40
16
6,50
MLC1265
150
600
0,40
16
6,70
MLC1538
200
800
0,35
20
4,00
MLC1550
150
600
0,40
20
5,45
MLC1555
150
500
0,40
20
5,95
MLC1560 150
500
0,40
20
6,20
MLC1565 125
500
0,40
20
6,50
A
MLCxxx
-xxxML
Part number
XXXX Y
Internal code
B
Parts manufactured prior
to March 2012 may be
marked differently.
Max height.
See electrical
specifications
table.
Recommended
Land Pattern
G
C
D
E
F
E
Body
A
B
Size max
max
C
D
E
F
G
124011.210.51.82.34.04.02.7
124511.210.51.82.34.04.02.7
125011.210.51.82.34.04.02.7
125511.410.51.82.34.04.02.7
126011.410.51.82.34.04.02.7
126511.410.51.82.34.04.02.7
153813.813.22.43.05.05.43.4
155013.813.22.43.05.05.43.4
155513.813.22.43.05.05.43.4
156013.813.22.43.05.05.43.4
156514.013.22.43.05.05.43.4
All dimensions are in mm.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 327-2 Revised 04/19/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 327-3
Shielded Power Inductors – MLC12xx/15xx Series
Typical L vs Current
Typical L vs Frequency
100
100
MLC1565-153
Inductance (µH)
Inductance (µH)
MLC1565-153
MLC1565-922
10
MLC1550-452
MLC1565-282
MLC1538-152
MLC1538-102
1
MLC1555-551
MLC1265-361
0.1
MLC1565-922
10
MLC1550-452
MLC1565-282
MLC1538-152
MLC1538-102
1
MLC1555-551
MLC1265-361
0.1
0.01
1
0.1
10
Frequency (MHz)
0.1
1
Current (A)
10
100
Inductance vs current is unaffected by part temperature up to 125°C.
60
50
MLC
1565
-922
MLC
155
0-45
2
ML
C15
ML
3
C1 8-15
ML 565- 2
28
C1
ML 538- 2
10
C1
2
26
0-1
22
MLC1
565-15
3
Temperature rise (from 25°C)
70
ML
ML C15
C1 5526 551
536
1
Temperature Rise vs Current
40
30
20
10
0
0
5
10
15
20
25
30
Current (A rms)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 327-3 Revised 04/19/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.