COILCRAFT MS336RAD

0805 CHIP INDUCTORS
High Reliability Chip Inductors MS336RAD
The MS336RAD inductors provide exceptional Q values,
even at high frequencies. They have a ceramic body and
wire wound construction to provide the highest SRFs,
tight inductance tolerance and batch consistency.
This robust version of Coilcraft’s standard 0805HQ series
features high temperature materials that allow operation
in ambient temperatures up to 155°C. The leach-resistant
base metalization with tin-lead (Sn-Pb) terminations
ensures the best possible board adhesion.
Inductance2
Percent SRF min4
DCR max5
Imax
(nH)tolerance
Q min3
(GHz) (Ohms)(A)
Part number1
MS336RAD2N5JSZ
MS336RAD5N6JSZ
MS336RAD6N2JSZ
MS336RAD12NJSZ
MS336RAD16N_SZ
MS336RAD18N_SZ
MS336RAD20N_SZ
MS336RAD27N_SZ
MS336RAD30N_SZ
MS336RAD39N_SZ
MS336RAD48N_SZ
MS336RAD51N_SZ
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 200 MHz
[email protected] 200 MHz
5
5
5
5
5,2
5,2
5,2
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
56 @ 1000 MHz
83 @ 1000 MHz
80 @ 1000 MHz
52 @ 500 MHz
72 @ 500 MHz
70 @ 500 MHz
54 @ 250 MHz
58 @ 250 MHz
50 @ 250 MHz
53 @ 250 MHz
44 @ 150 MHz
36 @ 150 MHz
>5.00
4.88
4.55
2.80
2.40
2.20
2.05
2.00
1.74
1.60
1.40
1.28
0.020
0.035
0.035
0.045
0.060
0.060
0.060
0.070
0.095
0.110
0.095
0.120
2.0
1.9
1.8
1.6
1.4
1.4
1.4
1.3
1.1
1.0
1.1
0.9
1. When ordering, please specify tolerance and testing codes:
Core material Ceramic
MS336RAD51NGSZ
Tolerance: F =1% G = 2% J = 5%
Testing:Z =COTS
H=Screening per Coilcraft CP‑SA‑10001
N
=Screening per Coilcraft CP‑SA‑10003
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286 impedance analyzer or equivalent with Coilcraft-provided correlation pieces.
3. Q measured at the same frequency as inductance using an Agilent/HP
4291A with an Agilent/HP 16197 test fixture or equivalents.
4. SRF measured using an Agilent/HP 8753ES network analyzer or
equivalent and a Coilcraft SMD-D test fixture.
5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a
Coilcraft CCF858 test fixture.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Terminations Tin-lead (63/37) over silver-platinum-glass frit
Ambient temperature –55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 2000 per 7″ reel
Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing,
1.65 mm pocket depth
Document MS197-1 Revised 11/06/12
®
© Coilcraft, Inc. 2012
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
0805 CHIP INDUCTORS
MS336RAD Series (0805)
Typical Q vs Frequency
Typical L vs Frequency
70
140
6.2 nH
16 nH
120
48 nH
60
2.5 nH
80
Inductance (nH)
Q Factor
100
20 nH
30 nH
60
48 nH
40
50
20
10
0
0
100
1000
5000
20 nH
30
20
10
30 nH
40
16 nH
6.2 nH
2.5 nH
10
1
Frequency (MHz)
Irms Derating
B
overall
120
C
F
110
A
100
90
E
terminal
80
70
1000
5000
H
Pick and
place
material
I
G
J
F
I
D
Terminal wraparound:
approx 0.015/0,38 both ends
Suggested
Recommended
LandPattern
Pattern
Land
60
ABCD
maxmaxmax ref E F G H IJ
0.0900.0680.0600.0200.0500.0200.0400.0700.0400.030inches
2,291,731,520,511,270,511,021,781,020,76
mm
50
40
25°C
Percent of rated Irms
100
Frequency (MHz)
30
Note: Dimensions are before solder application. For maximum overall
dimensions including solder, add 0.0025 in / 0,064 mm to B and
0.006 in / 0,15 mm to A and C.
20
10
0
-55 -40
-20
0
20
40
60
80
100
120
140 160
Ambient temperature (°C)
Document MS197-2 Revised 11/06/12
®
© Coilcraft, Inc. 2012
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.