I-Type Medallion 6000 1550 nm Externally-Modulated Transmitter DATASHEET | NOVEMBER 2013 FIBER OPTICS The I-Type Medallion 6000 Series Applications High-Performance Supertrunking Links High-Power Distribution Networks Redundant Ring Architectures FTTx Networks RFoG Applications Optimized for International CATV Systems DWDM Node Splitting Features Single or Dual Optical Outputs QAM Loading to 1003 MHz Dual Power Supplies, Redundant & Hot Swappable Front Panel RF Test Point Vacuum Fluorescent Status Display OMI / RF Gain Adjustment AGC Select: CW, Video, Manual (No AGC) Industry Leading Field Adjustable SBS Suppression The I-Type Medallion 6000 series is a family of state-of-the-art high-performance 1550 nm externally-modulated CATV fiber optic transmitters optimized for International network applications that employ an 85 MHz forward / reverse path split frequency. Packaged in a convenient 1 RU housing, this line of optical transmitters couples high optical output power, up to 10.0 dBm, with low optical linewidth resulting in unmatched performance. The optical modulator, combined with proprietary pre-distortion circuitry, provides superior CTB and CSO performance with adjustable SBS suppression levels of greater than 19 dBm. The I-Type transmitter’s exceptional performance is enabled by EMCORE’s proprietary high power, narrow linewidth CW (Continuous Wave) laser technology. When deployed with one or more EMCORE optical amplifiers, transmissions of 150 km can be achieved. The feature-rich WEB GUI and SNMP interface bring a whole suite of advanced operator monitoring and configuration options to the platform, allowing for secure, simplified and future-ready functionality for the next generation of intelligent networks. Advanced features such as built-in field adjustable SBS control allow these transmitters to be quickly optimized in the field for any link or application without the need to procure specifically tuned transmitters. I-Type transmitters are specially designed and optimized to support fiber optic links of up to 150 km for the international marketplace and other markets with similar requirements. Monitoring and configuration is supported via a convenient front panel display, an RS-232 port, and an Ethernet port with SNMP, Telnet, and Web GUI. The platform is mechanically designed for flexibility and space efficiency including universal rack-mount features, modular front panel design, and optional front and rear port placement. Dual redundant field-replaceable fans and power supplies are standard. | REV 2013.11 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. I-Type Medallion 6000 1550 nm Externally-Modulated Transmitter FIBER OPTICS DATASHEET | NOVEMBER 2013 Optical Characteristics Property Performance (note 1-9) Units Specified Link Length 6000-0IE1 65 65 Other Fiber Lengths Supported. See Note 8 NTSC 80-Ch PAL 60-Ch Other Channel Plans Supported. Note 9 7.0/7.0 8.5/8.5 L (km) Channel Plan Comments Optical Output Power Po (dBm) Noise Bandwidth BW (MHz) 4 5 SBS Suppression (dBm) 13 to 19 13 to 19 Min. Carrier to Noise Ratio CNR (dB) 52.5 52.5 Min. Composite Second Order CSO (dBc) -65 -65 Max. Port 1 Composite Triple Beat CTB (dBc) -65 -65 Max. @ +25C Composite Triple Beat CTB (dBc) -64 -64 Max. @ 0 C to 50 C Min. 10 dBm version avail. See Chart o o Notes: 1. Unless stated otherwise all specifications apply over full temperature range with no digital loading. 2. Unless stated otherwise specifications apply for nominal RF input level as defined below, after a 30 minute stabilization period. 3. Specifications separated by a slash are port1 / port 2. 4. Units are tested per the Test / Link Configuration Table 5. Noise figure for the EDFA = 4.5 ~ 5.5 dB 6. Corning SMF-28 single mode fiber 7. Receiver responsivity is 0.95 mA/mW, Equivalent noise current is 7 pA/(Hz)1/2 8. Fiber lengths from 0 to 100 km can be supported. See Figure 2 for CSO performance. 9. The lowest frequency of all channel plans shall be > 119.25 MHz. A 2 dB penalty of CNR may occur for channels from 85 to 112.25 MHz. See the Electrical Specifications Table for correct input power for other channel plans. Test/Link Configuration Property I-Type EDFA Link Received Power2 16 dBm 65 Km 0.0 dBm at the receiver Figure 1 | REV 2013.11 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. I-Type Medallion 6000 1550 nm Externally-Modulated Transmitter FIBER OPTICS DATASHEET | NOVEMBER 2013 Electrical Specifications Property CATV Nominal Input Power CATV Composite Level CATV Input Range CATV RF Gain / OMI Adjustment Range CATV Frequency Range Requirement Comments 18 dBmV/ch (78 dBuV/ch) 19 dBmV/ch (79 dBuV/ch) 80 NTSC channels 60 PAL channels -11.7 dBm 0 dB on FP Display (All Channel Plans) +2/-8 dB from nominal input Optimal performance at nominal input +2/-8 dB from nominal setting CATV Performance may vary slightly over range 45 MHz – 1003 MHz CATV Flatness +/- 0.50 dB +/- 0.75 dB CATV Input impedance 75 CATV Input Return Loss 16 dB min CATV Front Panel RF Tap 45 MHz – 550 MHz 45 MHz – 1003 MHz 45 MHz – 1003 MHz -20 +/- 1 dB down from RF input CATV Front Panel RF Tap Flatness +/- 1 dB 45 MHz – 1003 MHz Figure 2 40 -50 35 -55 30 -60 25 -65 20 -70 15 -75 10 1 10 EMCORE Proprietary Information Fiber Length (km ) -80 100 Worst Case CSO Generation Due to Fiber Effects (dB) SBS suppression (dBm) Medallion 6000 I-Type SBS Suppression and CSO Generation 80 ch NTSC channel load vs Fiber length w ith varying SBS Settings Single EDFA Fiber Link All Data show n is Typical Performance | REV 2013.11 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. SBS=19 dBm SBS=18 dBm SBS=17 dBm SBS=16 dBm SBS=15 dBm SBS=14 dBm SBS=13 dBm 13 dBm CSO 14 dBm CSO 15 dBm CSO 19 dBm CSO 18 dBm CSO 17 dBm CSO 16 dBm CSO I-Type Medallion 6000 1550 nm Externally-Modulated Transmitter FIBER OPTICS DATASHEET | NOVEMBER 2013 General and Mechanical Specifications Property Wavelength Channel Plan Requirement Comments 1555+/-5 nm Various Options + ITU-grid available – see Model Number Information Various – See Specification Tables Optical Connector Monitoring Interfaces Operating Temperature SC/APC Other styles available 100 Base-T Ethernet (SNMP) Rear Panel RS-232 interface VFD Screen Front Panel Controls VFD- (Vacuum Fluorescent Display) 0C to 50C Storage Temperature -20C to 70C Power Consumption 65 W max EMI: EN50083-2:2006 (US CATV) EN55022:2006 (US IT) EN61000-3-2 (Harmonics) EN61000-3-3 (Flicker) FCC: Part 15, Subpart B, class “A” Unintentional Radiators ICES-003 (Canada) AN/NZS 3548, Class A (Australia) VCCI, Class A (Japan) Safety: FDA/CDRH Laser Safety Governed by Code of Federal Regulations Title 21, Volume 8, Part 1040 IEC 60950-1 IEC 60728-11 Laser IEC 60825-1 CB Certification Transportation Vibration GR-2853-CORE In Shipping package Transportation Shock GR-2853-CORE In Shipping package 20% to 85% Non-condensing Agency Listings Operating Humidity Supply Range 90 to 265 VAC, 50/60 Hz +/- (36 – 72) VDC (VAC) (VDC) Dimensions 19.0” W x 15.0” D x 1.72” H (width includes 19” front panel ears, depth includes, connectors, fans & front panel) – see drawing | REV 2013.11 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. I-Type Medallion 6000 1550 nm Externally-Modulated Transmitter DATASHEET | NOVEMBER 2013 FIBER OPTICS Outline Drawing | REV 2013.11 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. I-Type Medallion 6000 1550 nm Externally-Modulated Transmitter FIBER OPTICS DATASHEET | NOVEMBER 2013 Model Number InformationNote 3 6000 – □□□ □-□ □□□□ Logo & Customer Specific Link Type 0 – EMCORE Logo I – 0 to 100 km Pout (dBm min) Note 1 1 – no Logo D – 10/10 Note 4 Loading Type Optics 1 – All Channel Plans 1 – SC/APC, Rear A – 7.0/7.0 2 – FC/APC, Rear 3 – E2000/APC, Rear 4 – SC/APC, Front 5 – FC/APC, Front RF 1 – RF IN Rear, TP Front 2 – RF IN Front, TP Front 3 – RF IN Front, TP Rear 4 – RF IN Rear, TP Rear Wavelength (nm) Power Supply 00 –1555+/5.0 nm 1 – AC primary, no secondary 01 – 1550+/5.0 nm 2 – DC primary, no secondary xx – ITU Channel +/Note 2 0.1 nm 3 – AC primary, AC secondary 4 – AC primary, DC secondary 5 – DC primary, DC secondary 6 – E2000/APC, Front Note 1: Options available for Indicated types only Note 2: ITU grid wavelengths can be specified from channel 18 to 40 Note 3: Not all configurations are available, contact factory Note 4: CSO port 2 degraded by 1dB Note 5: Contact Factory for Model type availability Additional Kits G3708-006-001 - Replaceable AC power supply modules G3708-005-001 - Replaceable DC power supply modules G7914-076-001 - Replaceable Blank power module plate G3906-008-001 - Replaceable fans Laser Safety Information This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class 1M laser product. During use as intended, the laser energy is fully contained within the fiber network such that there is no accessible laser radiation. This product has been issued accession number 0820466-001. | REV 2013.11 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.