Metallized Polyester Film Capacitors (MKT and MFT) B 32 520 Plastic Case … B 32 529 Standard applications Construction ■ Dielectric: polyethylene terephthalate (polyester) ■ Stacked-film technology for lead spacing 5 and 7,5 mm as well as for 10 and 15 mm (63 … 400 Vdc) ■ Wound capacitor technology for lead spacing 10 mm (630 Vdc), for lead spacing 15 mm (250 ... 630 Vdc), for lead spacing 22,5 and 27,5 mm ■ Plastic case (UL 94 V-0) ■ Epoxy resin sealing Dimensions in mm Lead spacing ± 0,4 Diameter d1 Type Features 5,0 0,5 B 32 529 ■ High pulse strength ■ High contact reliability 7,5 0,5 B 32 520 10,0 0,51) /0,6 B 32 521 15,0 0,8 B 32 522 22,5 0,8 B 32 523 27,5 0,8 B 32 524 Terminals ■ Parallel wire leads, tinned ■ Also available with (3,2 ± 0,3) mm lead length ■ Special lead lengths available upon request 1) 0,5 mm for capacitor width b = 4 mm Marking Manufacturer’s logo, lot number, style and type (T5xx) for lead spacing ≥ 10 mm, type (coded) for lead spacing 5 mm (B32529 =ˆ 1), rated capacitance (coded), capacitance tolerance (code letter), rated dc voltage, date of manufacture (coded) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter “Taping and packing”, page 274. 15 12/00 MKT B 32 520 … B 32 529 Overview of available types 5 mm 7,5 mm 10 mm 15 mm 22,5 mm 27,5 mm Type B 32 529 B 32 520 B 32 521 B 32 522 B 32 523 B 32 524 Page 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 17 21 23 25 27 28 63 Vdc 250 Vdc 400 Vdc 630 Vdc µF µF µF µF µF µF µF µF µF µF µF µF µF µF 50 Vdc 0,22 0,33 0,47 0,68 1,0 1,5 2,2 3,3 4,7 6,8 10 15 22 33 Note 63 Vdc 100 Vdc 0,15 µF Stacked-film technology 63 Vdc 100 Vdc 250 Vdc 400 Vdc 630 Vdc 100 Vdc 250 Vdc 400 Vdc 630 Vdc 400 Vdc 0,10 µF 63 Vdc 100 Vdc nF 400 Vdc 630 Vdc nF 68 100 Vdc 250 Vdc nF 47 250 Vdc nF 33 63 Vdc 100 Vdc 250 Vdc 400 Vdc 22 630 Vdc Lead spacing Stacked-film/ Wound capacitor technology Wound capacitor technology 16 12/00 B 32 529 MKT 5 Ordering codes and packing units, lead spacing 5 mm VR (Vrms, f ≤ 60 Hz) CR 50 Vdc (32 Vac) 0,33 µF 0,47 µF 0,68 µF 1,0 µF 1,5 µF 2,2 µF 3,3 µF 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 µF 0,15 µF 0,22 µF 0,33 µF 0,47 µF 0,68 µF 1,0 µF 1,5 µF 2,2 µF 63 Vdc (40 Vac) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 3,0 × 6,5 × 7,2 3,5 × 8,0 × 7,2 4,5 × 9,5 × 7,3 4,5 × 9,5 × 7,3 6,0 × 10,5 × 7,5 7,8 × 13,0 × 7,8 7,8 × 13,0 × 7,8 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 3,0 × 6,5 × 7,2 3,5 × 8,0 × 7,2 4,5 × 9,5 × 7,3 4,5 × 9,5 × 7,3 6,0 × 10,5 × 7,5 7,8 × 13,0 × 7,8 B32529-C5334-+*** B32529-C5474-+*** B32529-C5684-+*** B32529-C5105-+*** B32529-C5155-+*** B32529-D5225-+*** B32529-D5335-+*** B32529-C102-+*** B32529-C152-+*** B32529-C222-+*** B32529-C332-+*** B32529-C472-+*** B32529-C682-+*** B32529-C103-+*** B32529-C153-+*** B32529-C223-+*** B32529-C333-+*** B32529-C473-+*** B32529-C683-+*** B32529-C104-+*** B32529-C154-+*** B32529-C224-+*** B32529-C334-+*** B32529-C474-+*** B32529-C684-+*** B32529-C105-+*** B32529-C155-+*** B32529-D225-+*** Ammo pack 2700 2300 1800 1800 1300 1000 1000 3200 3200 3200 3200 3200 3200 3200 3200 3200 3200 3200 3200 3200 3200 3200 2700 2300 1800 1800 1300 1000 Reel Untaped 2400 2000 1500 1500 1100 800 800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2400 2000 1500 1500 1100 800 2000 2000 1500 1500 1000 1000 1000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1500 1500 1000 1000 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32529-C5334-K3 17 12/00 MKT B 32 529 5 Ordering codes and packing units, lead spacing 5 mm VR (Vrms, f ≤ 60 Hz) CR 100 Vdc (63 Vac) 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 µF 0,15 µF 0,22 µF 0,33 µF 0,47 µF 0,68 µF 1,0 µF Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 3,0 × 6,5 × 7,2 3,5 × 8,0 × 7,2 3,5 × 8,0 × 7,2 4,5 × 9,5 × 7,3 6,0 × 10,5 × 7,5 7,8 × 13,0 × 7,8 B32529-C1102-+*** B32529-C1152-+*** B32529-C1222-+*** B32529-C1332-+*** B32529-C1472-+*** B32529-C1682-+*** B32529-C1103-+*** B32529-C1153-+*** B32529-C1223-+*** B32529-C1333-+*** B32529-C1473-+*** B32529-C1683-+*** B32529-C1104-+*** B32529-C1154-+*** B32529-C1224-+*** B32529-C1334-+*** B32529-C1474-+*** B32529-C1684-+*** B32529-D1105-+*** Ammo pack 3200 3200 3200 3200 3200 3200 3200 3200 3200 3200 3200 3200 3200 2700 2300 2300 1800 1300 1000 Reel Untaped 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2400 2000 2000 1500 1100 800 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1500 1000 1000 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32529-C1102-K3 18 12/00 B 32 529 MKT 5 Ordering codes and packing units, lead spacing 5 mm VR (Vrms, f ≤ 60 Hz) CR 250 Vdc (160 Vac) 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 µF 0,15 µF 0,22 µF 0,33 µF 0,47 µF Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 3,0 × 6,5 × 7,2 3,5 × 8,0 × 7,2 4,5 × 9,5 × 7,3 4,5 × 9,5 × 7,3 5,0 × 10,0 × 7,5 7,8 × 13,0 × 7,8 7,8 × 13,0 × 7,8 7,8 × 13,0 × 7,8 B32529-C3102-+*** B32529-C3152-+*** B32529-C3222-+*** B32529-C3332-+*** B32529-C3472-+*** B32529-C3682-+*** B32529-C3103-+*** B32529-C3153-+*** B32529-C3223-+*** B32529-C3333-+*** B32529-C3473-+*** B32529-C3683-+*** B32529-C3104-+*** B32529-C3154-+*** B32529-D3224-+*** B32529-C3334-+*** B32529-C3474-+*** Ammo pack 3200 3200 3200 3200 3200 3200 3200 3200 3200 2700 2300 1800 1800 1600 1000 1000 1000 Reel Untaped 2800 2800 2800 2800 2800 2800 2800 2800 2800 2400 2000 1500 1500 1400 800 800 800 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1500 1500 1500 1000 1000 1000 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32529-C3102-K3 19 12/00 MKT B 32 529 5 Ordering codes and packing units, lead spacing 5 mm VR (Vrms, f ≤ 60 Hz) CR 400 Vdc (200 Vac) 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 µF 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 630 Vdc (400 Vac) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 3,0 × 6,5 × 7,2 3,5 × 8,0 × 7,2 4,5 × 9,5 × 7,3 5,0 × 10,0 × 7,5 6,0 × 10,5 × 7,5 7,8 × 13,0 × 7,8 7,8 × 13,0 × 7,8 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 2,5 × 6,5 × 7,2 3,5 × 8,0 × 7,2 3,5 × 8,0 × 7,2 3,5 × 8,0 × 7,2 5,0 × 10,0 × 7,5 B32529-C6102-+*** B32529-C6152-+*** B32529-C6222-+*** B32529-C6332-+*** B32529-C6472-+*** B32529-C6682-+*** B32529-C6103-+*** B32529-C6153-+*** B32529-B6223-+*** B32529-B6333-+*** B32529-B6473-+*** B32529-D6683-+*** B32529-D6104-+*** B32529-C8102-+*** B32529-C8152-+*** B32529-C8222-+*** B32529-C8332-+*** B32529-C8472-+*** B32529-C8682-+*** B32529-C8103-+*** Ammo pack 3200 3200 3200 3200 3200 3200 2700 2300 1800 1600 1300 1000 1000 3200 3200 3200 2300 2300 2300 1600 Reel Untaped 2800 2800 2800 2800 2800 2800 2400 2000 1500 1400 1100 800 800 2800 2800 2800 2000 2000 2000 1400 2000 2000 2000 2000 2000 2000 2000 2000 1500 1500 1000 1000 1000 2000 2000 2000 2000 2000 2000 1500 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32529-C6102-K3 20 12/00 B 32 520 MKT 7,5 Ordering codes and packing units, lead spacing 7,5 mm VR (Vrms, f ≤ 60 Hz) CR 63 Vdc (40 Vac) 68 nF 0,10 µF 0,15 µF 0,22 µF 0,33 µF 0,47 µF 0,68 µF 1,0 µF 1,5 µF 2,2 µF 47 nF 68 nF 0,10 µF 0,15 µF 0,22 µF 0,33 µF 0,47 µF 0,68 µF 1,0 µF 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 µF 0,15 µF 100 Vdc (63 Vac) 250 Vdc (160 Vac) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 3,0 × 8,0 × 10,0 4,0 × 8,5 × 10,0 5,0 × 10,5 × 10,0 5,0 × 10,5 × 10,0 6,0 × 12,0 × 10,3 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 3,0 × 8,0 × 10,0 3,0 × 8,0 × 10,0 4,0 × 8,5 × 10,0 5,0 × 10,5 × 10,0 6,0 × 12,0 × 10,3 6,0 × 12,0 × 10,3 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 3,0 × 8,0 × 10,0 4,0 × 8,5 × 10,0 5,0 × 10,5 × 10,0 B32520-C683-+*** B32520-C104-+*** B32520-C154-+*** B32520-C224-+*** B32520-C334-+*** B32520-C474-+*** B32520-C684-+*** B32520-C105-+*** B32520-C155-+*** B32520-C225-+*** B32520-C1473-+*** B32520-C1683-+*** B32520-C1104-+*** B32520-C1154-+*** B32520-C1224-+*** B32520-C1334-+*** B32520-C1474-+*** B32520-C1684-+*** B32520-C1105-+*** B32520-C3153-+*** B32520-C3223-+*** B32520-C3333-+*** B32520-C3473-+*** B32520-C3683-+*** B32520-C3104-+*** B32520-C3154-+*** Ammo pack 3200 3200 3200 3200 3200 2600 2000 1600 1600 1300 3200 3200 3200 2600 2600 2000 1600 1300 1300 3200 3200 3200 3200 2600 2000 1600 Reel Untaped 2800 2800 2800 2800 2800 2400 1800 1400 1400 1100 2800 2800 2800 2400 2400 1800 1400 1100 1100 2800 2800 2800 2800 2400 1800 1400 2500 2500 2500 2500 2500 2000 1500 1000 1000 750 2500 2500 2500 2000 2000 1500 1000 750 750 2500 2500 2500 2500 2000 1500 1000 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32520-C683-K3 21 12/00 MKT B 32 520 7,5 Ordering codes and packing units, lead spacing 7,5 mm VR (Vrms, f ≤ 60 Hz) CR 400 Vdc (200 Vac) 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 2,5 × 7,0 × 10,0 3,0 × 8,0 × 10,0 4,0 × 8,5 × 10,0 5,0 × 10,5 × 10,0 5,0 × 10,5 × 10,0 6,0 × 12,0 × 10,3 B32520-C6102-+*** B32520-C6152-+*** B32520-C6222-+*** B32520-C6332-+*** B32520-C6472-+*** B32520-C6682-+*** B32520-C6103-+*** B32520-C6153-+*** B32520-C6223-+*** B32520-C6333-+*** B32520-C6473-+*** B32520-C6683-+*** Ammo pack 3200 3200 3200 3200 3200 3200 3200 2600 2000 1600 1600 1300 Reel Untaped 2800 2800 2800 2800 2800 2800 2800 2400 1800 1400 1400 1100 2500 2500 2500 2500 2500 2500 2500 2000 1500 1000 1000 750 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32520-C6102-K3 22 12/00 B 32 521 MKT 10 Ordering codes and packing units, lead spacing 10 mm VR (Vrms, f ≤ 60 Hz) CR 63 Vdc (40 Vac) 0,47 µF 0,68 µF 1,0 µF 1,5 µF 2,2 µF 3,3 µF 0,10 µF 0,15 µF 0,22 µF 0,33 µF 0,47 µF 0,68 µF 1,0 µF 33 nF 47 nF 68 nF 0,10 µF 0,15 µF 0,22 µF 0,33 µF 0,47 µF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 µF 100 Vdc (63 Vac) 250 Vdc (160 Vac) 400 Vdc (200 Vac) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 4,0 × 7,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 9,0 × 13,0 5,0 × 11,0 × 13,0 5,0 × 11,0 × 13,0 6,0 × 12,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 9,0 × 13,0 5,0 × 11,0 × 13,0 6,0 × 12,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 9,0 × 13,0 5,0 × 11,0 × 13,0 5,0 × 11,0 × 13,0 6,0 × 12,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 7,0 × 13,0 4,0 × 9,0 × 13,0 5,0 × 11,0 × 13,0 5,0 × 11,0 × 13,0 6,0 × 12,0 × 13,0 B32521-C474-+*** B32521-C684-+*** B32521-C105-+*** B32521-C155-+*** B32521-C225-+*** B32521-C335-+*** B32521-C1104-+*** B32521-C1154-+*** B32521-C1224-+*** B32521-C1334-+*** B32521-C1474-+*** B32521-C1684-+*** B32521-C1105-+*** B32521-C3333-+*** B32521-C3473-+*** B32521-C3683-+*** B32521-C3104-+*** B32521-C3154-+*** B32521-C3224-+*** B32521-C3334-+*** B32521-C3474-+*** B32521-C6103-+*** B32521-C6153-+*** B32521-C6223-+*** B32521-C6333-+*** B32521-C6473-+*** B32521-C6683-+*** B32521-C6104-+*** Ammo pack 1000 1000 1000 830 830 680 1000 1000 1000 1000 1000 830 680 1000 1000 1000 1000 1000 830 830 680 1000 1000 1000 1000 830 830 680 Reel Untaped 1700 1700 1700 1300 1300 1100 1700 1700 1700 1700 1700 1300 1100 1700 1700 1700 1700 1700 1300 1300 1100 1700 1700 1700 1700 1300 1300 1100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32521-C474-K3 23 12/00 MKT B 32 521 10 Ordering codes and packing units, lead spacing 10 mm VR (Vrms, f ≤ 60 Hz) CR 630 Vdc (200 Vac) 6,8 nF2) 10 nF2) 15 nF2) 22 nF2) 33 nF2) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 4,0 × 9,0 × 13,0 4,0 × 9,0 × 13,0 5,0 × 11,0 × 13,0 5,0 × 11,0 × 13,0 6,0 × 12,0 × 13,0 B32521-N8682-+*** B32521-N8103-+*** B32521-N8153-+*** B32521-N8223-+*** B32521-N8333-+*** Ammo pack 1000 1000 830 830 680 Reel Untaped 1700 1700 1300 1300 1100 1000 1000 1000 1000 1000 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32521-N8682-K3 2) Wound capacitor technology 24 12/00 B 32 522 MKT 15 Ordering codes and packing units, lead spacing 15 mm VR (Vrms, f ≤ 60 Hz) CR 63 Vdc (40 Vac) 0,68 µF 1,0 µF 1,5 µF 2,2 µF 3,3 µF 4,7 µF 6,8 µF 10 µF 0,33 µF 0,47 µF 0,68 µF 1,0 µF 1,5 µF 2,2 µF 3,3 µF 4,7 µF 0,10 µF 0,15 µF 0,22 µF 0,33 µF 0,47 µF 0,68 µF 1,0 µF 1,0 µF2) 1,5 µF 1,5 µF2) 100 Vdc (63 Vac) 250 Vdc (160 Vac) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 6,0 × 11,0 × 18,0 7,0 × 12,5 × 18,0 8,5 × 14,5 × 18,0 9,0 × 17,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 6,0 × 11,0 × 18,0 7,0 × 12,5 × 18,0 8,5 × 14,5 × 18,0 9,0 × 17,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 6,0 × 11,0 × 18,0 7,0 × 12,5 × 18,0 8,5 × 14,5 × 18,0 8,5 × 14,5 × 18,0 9,0 × 17,5 × 18,0 9,0 × 17,5 × 18,0 B32522-C684-+*** B32522-C105-+*** B32522-C155-+*** B32522-C225-+*** B32522-C335-+*** B32522-C475-+*** B32522-C685-+*** B32522-C106-+*** B32522-C1334-+*** B32522-C1474-+*** B32522-C1684-+*** B32522-C1105-+*** B32522-C1155-+*** B32522-C1225-+*** B32522-C1335-+*** B32522-C1475-+*** B32522-C3104-+*** B32522-C3154-+*** B32522-C3224-+*** B32522-C3334-+*** B32522-C3474-+*** B32522-C3684-+*** B32522-C3105-+*** B32522-N3105-+*** B32522-C3155-+*** B32522-N3155-+*** Ammo pack 1170 1170 1170 1170 960 830 680 640 1170 1170 1170 1170 960 830 680 640 1170 1170 1170 1170 960 830 680 680 640 640 Reel Untaped 1300 1300 1300 1300 1100 900 700 700 1300 1300 1300 1300 1100 900 700 700 1300 1300 1300 1300 1100 900 700 700 700 700 1000 1000 1000 1000 1000 1000 500 500 1000 1000 1000 1000 1000 1000 500 500 1000 1000 1000 1000 1000 1000 500 500 500 500 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32522-C684-K3 2) Wound capacitor technology 25 12/00 MKT B 32 522 15 Ordering codes and packing units, lead spacing 15 mm VR (Vrms, f ≤ 60 Hz) CR 400 Vdc (200 Vac) 47 nF 68 nF 0,10 µF 0,10 µF2) 0,15 µF 0,15 µF2) 0,22 µF 0,22 µF2) 0,33 µF 0,33 µF2) 0,47 µF2) 0,68 µF2) 33 nF2) 47 nF2) 68 nF2) 0,10 µF2) 0,15 µF2) 0,22 µF2) 630 Vdc (200 Vac) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 6,0 × 11,0 × 18,0 5,0 × 10,5 × 18,0 7,0 × 12,5 × 18,0 6,0 × 11,0 × 18,0 8,5 × 14,5 × 18,0 8,5 × 14,5 × 18,0 8,5 × 14,5 × 18,0 9,0 × 17,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 6,0 × 11,0 × 18,0 7,0 × 12,5 × 18,0 8,5 × 14,5 × 18,0 9,0 × 17,5 × 18,0 B32522-C6473-+*** B32522-C6683-+*** B32522-C6104-+*** B32522-N6104-+*** B32522-C6154-+*** B32522-N6154-+*** B32522-C6224-+*** B32522-N6224-+*** B32522-C6334-+*** B32522-N6334-+*** B32522-N6474-+*** B32522-N6684-+*** B32522-Q8333-+*** B32522-Q8473-+*** B32522-Q8683-+*** B32522-Q8104-+*** B32522-Q8154-+*** B32522-Q8224-+*** Ammo pack 1170 1170 1170 1170 960 1170 830 960 680 680 680 640 1170 1170 960 830 680 640 Reel Untaped 1300 1300 1300 1300 1100 1300 900 1100 700 700 700 700 1300 1300 1100 900 700 700 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 1000 1000 1000 1000 500 500 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32522-C6473-K3 2) Wound capacitor technology 26 12/00 B 32 523 MKT 22,5 Ordering codes and packing units, lead spacing 22,5 mm VR (Vrms, f ≤ 60 Hz) CR 63 Vdc (40 Vac) 3,3 µF 4,7 µF 6,8 µF 10 µF 1,5 µF 2,2 µF 3,3 µF 4,7 µF 6,8 µF 0,47 µF 0,68 µF 1,0 µF 1,5 µF 2,2 µF 3,3 µF 0,22 µF 0,33 µF 0,47 µF 0,68 µF 1,0 µF 0,10 µF 0,15 µF 0,22 µF 0,33 µF 0,47 µF 100 Vdc (63 Vac) 250 Vdc (160 Vac) 400 Vdc (200 Vac) 630 Vdc (200 Vac) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,5 10,5 × 18,5 × 26,5 6,0 × 15,0 × 26,5 6,0 × 15,0 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,5 6,0 × 15,0 × 26,5 6,0 × 15,0 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 10,5 × 16,5 × 26,5 11,0 × 20,5 × 26,5 6,0 × 15,0 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,5 10,5 × 16,5 × 26,5 6,0 × 15,0 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 10,5 × 16,5 × 26,5 10,5 × 20,5 × 26,5 B32523-Q335-+*** B32523-Q475-+*** B32523-Q685-+*** B32523-Q106-+*** B32523-Q1155-+*** B32523-Q1225-+*** B32523-Q1335-+*** B32523-Q1475-+*** B32523-Q1685-+*** B32523-Q3474-+*** B32523-Q3684-+*** B32523-Q3105-+*** B32523-Q3155-+*** B32523-Q3225-+*** B32523-Q3335-+*** B32523-Q6224-+*** B32523-Q6334-+*** B32523-Q6474-+*** B32523-Q6684-+*** B32523-Q6105-+*** B32523-Q8104-+*** B32523-Q8154-+*** B32523-Q8224-+*** B32523-Q8334-+*** B32523-Q8474-+*** Ammo pack 680 580 480 390 680 680 680 580 480 680 680 680 580 390 370 680 680 580 480 390 680 680 580 390 390 Reel Untaped 700 600 500 400 700 700 700 600 500 700 700 700 600 400 350 700 700 600 500 400 700 700 600 400 400 720 630 510 540 720 720 720 630 510 720 720 720 630 540 510 720 720 630 510 540 720 720 630 540 540 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32523-Q685-K3 27 12/00 MKT B 32 524 27,5 Ordering codes and packing units, lead spacing 27,5 mm VR (Vrms, f ≤ 60 Hz) CR 100 Vdc (63 Vac) 4,7 µF 6,8 µF 10 µF 15 µF 22 µF 33 µF 1,5 µF 2,2 µF 3,3 µF 4,7 µF 6,8 µF 10 µF 1,0 µF 1,5 µF 2,2 µF 3,3 µF 4,7 µF 0,33 µF 0,47 µF 0,68 µF 1,0 µF 1,5 µF 250 Vdc (160 Vac) 400 Vdc (200 Vac) 630 Vdc (220 Vac) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 11,0 × 21,0 × 31,5 11,0 × 21,0 × 31,5 11,0 × 21,0 × 31,5 12,5 × 21,5 × 31,5 14,0 × 24,5 × 31,5 18,0 × 27,5 × 31,5 11,0 × 21,0 × 31,5 11,0 × 21,0 × 31,5 11,0 × 21,0 × 31,5 11,0 × 21,0 × 31,5 14,0 × 24,5 × 31,5 18,0 × 27,5 × 31,5 11,0 × 21,0 × 31,5 11,0 × 21,0 × 31,5 12,5 × 21,5 × 31,5 15,0 × 24,5 × 31,5 18,0 × 27,5 × 31,5 11,0 × 21,0 × 31,5 11,0 × 21,0 × 31,5 11,0 × 21,0 × 31,5 14,0 × 24,5 × 31,5 18,0 × 27,5 × 31,5 B32524-Q1475-+*** B32524-Q1685-+*** B32524-Q1106-+*** B32524-Q1156-+*** B32524-Q1226-+*** B32524-Q1336-+*** B32524-Q3155-+*** B32524-Q3225-+*** B32524-Q3335-+*** B32524-Q3475-+*** B32524-Q3685-+*** B32524-Q3106-+*** B32524-Q6105-+*** B32524-Q6155-+*** B32524-Q6225-+*** B32524-Q6335-+*** B32524-Q6475-+*** B32524-Q8334-+*** B32524-Q8474-+*** B32524-Q8684-+*** B32524-Q8105-+*** B32524-Q8155-+*** Ammo pack – – – – – – – – – – – – – – – – – – – – – – Reel Untaped 350 350 350 300 250 – 350 350 350 350 250 – 350 350 300 – – 350 350 350 250 – 320 320 320 280 260 200 320 320 320 320 260 200 320 320 280 240 200 320 320 320 260 200 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32524-Q1685-K3 28 12/00 B 32 520 MKT … B 32 529 Technical data Climatic category in accordance with IEC 60068-1 55/100/56 Lower category temperature Tmin Upper category temperature Tmax − 55 °C + 100 °C (+ 125 °C for 1000 h and V C = 0,5 ⋅ V R) Damp heat test 56 days/40 °C/93 % relative humidity Limit values after damp heat test Capacitance change |∆C/C| Dissipation factor change ∆ tan δ Insulation resistance Ris or time constant τ = C R ⋅ Ris ≤5% ≤ 5 ⋅ 10−3 (at 1 kHz) ≥ 50 % of minimum as-delivered values Reliability: Reference conditions Failure rate 0,5 ⋅ V R; 40 °C 1 ⋅10−9/h = 1 fit For a conversion table for other operating conditions and temperatures, refer to chapter “Quality assurance”, page 327. Service life Failure criteria: Total failure Failure due to variation of parameters 200 000 h Short circuit or open circuit Capacitance change |∆C/C| Dissipation factor tan δ Insulation resistance Ris or time constant τ = C R ⋅ Ris > 10 % > 2 ⋅ upper limit value < 150 MΩ (CR ≤ 0,33 µF) < 50 s (CR > 0,33 µF) DC test voltage 1,4 ⋅ V R, 2 s Category voltage VC Operation with dc voltage or ac voltage Vrms up to 60 Hz T ≤ 85 °C V C = 1,0 ⋅ VR V C,rms = 1,0 ⋅ V rms T ≤ 100 °C V C = 0,8 ⋅ VR V C,rms = 0,8 ⋅ V rms Operating voltage for short operating periods T ≤ 85 °C V = 1,25 ⋅ VC, max. 2000 h V = 1,0 ⋅ VC,rms, max. 2000 h T ≤ 100 °C V = 1,25 ⋅ VC, max. 2000 h V = 1,0 ⋅ VC,rms, max. 2000 h T ≤ 125 °C V = 0,5 ⋅ VR, max. 1000 h V = 0,5 ⋅ Vrms, max. 1000 h at CR ≤ 0,1 µF 8 15 30 Dissipation factor tan δ (in 10−3) at 20 °C (upper limit values) Insulation resistance R is or time constant τ = CR ⋅ R is at 20 °C, rel. humidity ≤ 65 % (minimum as-delivered values) 1 kHz 10 kHz 100 kHz CR ≤ 0,33 µF 3750 MΩ 7500 MΩ VR ≤ 100 Vdc ≥ 250 Vdc 29 12/00 0,1 µF < CR ≤ 1 µF 10 20 – C R > 1 µF 10 – – CR > 0,33 µF 1250 s 2500 s MKT B 32 529 … B 32 529 Impedance Z versus frequency f (typical values) Pulse handling capability Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth) VR Max. rate of voltage rise V pp/τ in V/µs (for Vpp = VR) Lead spacing 5 mm 7,5 mm 10 mm1) 15 mm1) 50 Vdc 200 – – – 63 Vdc 250 120 50 100 Vdc 300 150 75 250 Vdc 400 200 150 100 (10) 400 Vdc 600 275 175 630 Vdc 800 – (20) 22,5 mm1) 27,5 mm1) – – 30 (3) – 50 (4) (3) (6) (4,5) 125 (20) (10) (7,5) (25) (15) (12) For V pp < V R, the permissible voltage rise rate value V pp/τ may be multiplied by the factor V R/V pp. Also refer to the calculation example in chapter “General technical information”, page 302. VR Pulse characteristic k 0 in V2/µs (for Vpp ≤ V R) Lead spacing 5 mm 50 Vdc 20 000 63 Vdc 30 000 7,5 mm 10 mm1) 15 mm1) 22,5 mm1) 27,5 mm1) – – – – 15 000 6 300 3 800 100 Vdc 60 000 30 000 15 000 10 000 250 Vdc 200 000 100 000 75 000 50 000 (5 000) 220 000 140 000 100 000 (15 000) – (25 000) (30 000) 400 Vdc 500 000 630 Vdc 1 000 000 1) Values in brackets apply to wound capacitors 30 12/00 – (375) – (750) (600) (3 000) (2 250) (8 000) (6 000) (18 000) (15 000) B 32 529 MKT 5 Permissible ac voltage V rms versus frequency f Lead spacing 5 mm 50 Vdc/ 32 Vac 63 Vdc/ 40 Vac Vac Vac Vrms Vrms 100 Vdc/ 63 Vac Vrms 250 Vdc/ 160 Vac KMK00761-7 400 Vac 200 Vrms 100 100 60 40 60 40 20 20 10 10 6 4 2 1 2 10 1,0 nF 3,3 nF 10 nF 0,1 µF 0,47 µF 1,0 µF 5 10 3 5 10 4 KMK0717-K 400 Vac 200 6 4 1,0 nF 6,8 nF 47 nF 0,47 µF 2 5 10 5 1 2 10 Hz 10 6 f 31 12/00 10 3 10 4 10 5 Hz 10 6 f MKT B 32 529 5 Permissible ac voltage V rms versus frequency f Lead spacing 5 mm 400 Vdc/ 200 Vac 630 Vdc/ 400 Vac KMK0705-W 1000 Vac Vac Vac Vrms Vrms 500 100 50 10 10 2 32 12/00 1 nF 4,7 nF 10 nF 10 3 10 4 10 5 Hz 10 6 f B 32 520 MKT 7,5 Permissible ac voltage V rms versus frequency f Lead spacing 7,5 mm 63 Vdc/ 40 Vac 100 Vdc/ 63 Vac KMK0663-H 400 Vac Vrms 200 Vac Vrms 100 60 40 20 10 6 4 47 µF 0,22 µF 0,68 µF 1,0 µF 2 1 10 2 250 Vdc/ 160 Vac 10 3 10 4 10 5 Hz 10 6 f 400 Vdc/ 200 Vac KMK0704-N 1000 Vac Vac Vac Vrms Vrms 500 100 50 10 10 2 33 12/00 1 nF 15 nF 68 nF 10 3 10 4 10 5 Hz 10 6 f MKT B 32 521 10 Permissible ac voltage V rms versus frequency f Lead spacing 10 mm 63 Vdc/ 40 Vac 100 Vdc/ 63 Vac Vac Vac Vrms Vrms 250 Vdc/ 160 Vac 400 Vdc/ 200 Vac Vac Vac Vrms Vrms 34 12/00 B 32 521 MKT 10 Permissible ac voltage V rms versus frequency f Lead spacing 10 mm 630 Vdc/ 200 Vac 35 12/00 MKT B 32 522 15 Permissible ac voltage V rms versus frequency f Lead spacing 15 mm 63 Vdc/ 40 Vac Vrms 100 Vdc/ 63 Vac KMK0588-W 400 Vac 200 Vrms 100 100 60 40 60 40 20 20 10 10 6 4 1 2 10 6 4 0,68 µF 2,2 µF 4,7 µF 10 µF 2 5 10 3 5 10 4 5 10 5 1 2 10 Hz 10 6 f KMK0590-8 Vac Vrms 100 60 40 20 6 4 0,1 µF 0,33 µF 1,0 µF 1,5 µF 2 1 2 10 5 10 3 400 Vdc/ 200 Vac 400 Vac 200 10 0,33 µF 1,0 µF 3,3 µF 4,7 µF 2 250 Vdc/ 160 Vac Vrms KMK0589-5 400 Vac 200 5 10 3 5 10 4 5 10 5 Hz 10 6 f 36 12/00 5 10 4 5 10 5 Hz 10 6 f B 32 522 MKT 15 Permissible ac voltage V rms versus frequency f Lead spacing 15 mm 630 Vdc/ 200 Vac Vrms KMK0587-N 400 Vac 200 100 60 40 20 10 33 nF 68 nF 0,1 µF 0,22 µF 6 4 2 1 2 10 5 10 3 5 10 4 5 10 5 Hz 10 6 f 37 12/00 MKT B 32 523 22,5 Permissible ac voltage V rms versus frequency f Lead spacing 22,5 mm 63 Vdc/ 40 Vac 100 Vdc/ 63 Vac KMK0664-Q 400 Vac Vrms 200 Vac Vrms 100 60 40 20 10 6 4 3,3 µF 6,8 µF 10 µF 2 1 10 2 10 3 10 4 10 5 Hz 10 6 f 250 Vdc/ 160 Vac 400 Vdc/ 200 Vac Vac Vrms Vrms KMK0586-F 400 Vac 200 100 60 40 20 10 6 4 0,22 µF 0,68 µF 1,0 µF 2 1 2 10 38 12/00 5 10 3 5 10 4 5 10 5 Hz 10 6 f B 32 523 MKT 22,5 Permissible ac voltage V rms versus frequency f Lead spacing 22,5 mm 630 Vdc/ 200 Vac Vrms KMK0585-7 400 Vac 200 100 60 40 20 10 0,1 µF 0,22 µF 0,47 µF 6 4 2 1 2 10 5 10 3 5 10 4 5 10 5 Hz 10 6 f 39 12/00 MKT B 32 524 27,5 Permissible ac voltage V rms versus frequency f Lead spacing 27,5 mm 100 Vdc/ 63 Vac 250 Vdc/ 160 Vac KMK0665-Y 400 Vac Vrms 200 Vrms 100 100 60 40 60 40 20 20 10 10 6 4 4,7 µF 15 µF 33 µF 1,5 µF 3,3 µF 10 µF 6 4 2 1 10 2 KMK0666-7 400 Vac 200 2 10 3 10 4 10 5 1 1 10 Hz 10 6 f 400 Vdc/ 200 Vac 5 10 2 630 Vdc/ 220 Vac Vac Vac Vrms Vrms 40 12/00 5 10 3 5 10 4 Hz 10 5 f Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 1