Temperature Measurement B57621 SMD NTC Thermistors with Silver Palladium Termination, Size 1206 Applications 1,6±0,2 C 621 1,3 max. ■ Temperature measurement and 3,2±0,2 compensation in – hybrid circuits – data systems – telecom systems – automotive electronics 0,5±0,25 Features ■ Silver palladium termination (AgPd) ■ Cost-effective ■ Suitable for wave and reflow soldering Termination Options TNT0398-F Dimensions in mm/Approx. weight 18 mg Alternative resistance ratings and resistance tolerance < 5% available on request Delivery mode Blister tape, 180-mm reel, PU: 4000 or 2000 pcs, depending on chip thickness Climatic category (IEC 60068-1) Max. power at 25 °C (on PCB) Resistance tolerance Rated temperature B value tolerance Dissipation factor (on PCB) Thermal cooling time constant (on PCB) Heat capacity P25 ∆R N/R N TN ∆B/B δth1) τc1) Cth1) B25/85 55/125/21 300 ± 5 %, ± 10 %, ± 20 % 25 ±3% approx. 5 approx. 10 approx. 50 B 25/100 mW °C mW/K s mJ/K Ordering code No. of R/T characteristic B 25/50 K K K 2,2 k 1308 3010 3040 3060 B57621C0222+062 3,3 k 1309 3430 3500 3520 B57621C0332+062 4,7 k 1309 3430 3500 3520 B57621C0472+062 10 k 1010 3470 3510 3530 B57621C0103+062 15 k 1008 3480 3550 3560 B57621C0153+062 22 k 1008 3480 3550 3560 B57621C0223+062 33 k 2003 3930 3960 3980 B57621C0333+062 47 k 2001 3860 3890 3920 B57621C0473+062 68 k 2001 3860 3890 3920 B57621C0683+062 R 25 Ω +: J for ∆RN/RN = ± 5 % K for ∆RN/RN = ± 10 % M for ∆RN/RN = ± 20 % 1) Depends on mounting situation 60 05/02 Temperature Measurement B57621 SMD NTC Thermistors with Silver Palladium Termination, Size 1206 R 25 No. of R/T characteristic Ω B 25/50 B 25/85 B 25/100 C 621 Ordering code K K K 100 k 4901 3870 3930 3950 B57621C0104+062 150 k 2903 4120 4190 4200 B57621C0154+162 220 k 2903 4120 4190 4200 B57621C0224+062 330 k 1014 4090 4210 4250 B57621C0334+062 470 k 1014 4090 4210 4250 B57621C0474+062 +: J for ∆RN/RN = ± 5 % K for ∆RN/RN = ± 10 % M for ∆RN/RN = ± 20 % Reliability data SMD NTC thermistors are tested in accordance with IEC 60068. The parts are mounted on a standardized PCB in accordance with IEC 60539-1. Test Standard Test conditions ∆R25/R 25 (typical) Storage in dry heat IEC 60068-2-2 JIS C 0021 Storage at upper category temperature T: (125 ± 2) °C t: 1000 h <3% Storage in damp heat, steady state IEC 60068-2-3 JIS C 0022 Temperature of air: (40 ± 2) °C Relative humidity of air: (93 +2/–3) % Duration: 21 days <3% Rapid temperature cycling IEC 60068-2-14 JIS C 0025 Lower test temperature: – 55 °C < 3 % Upper test temperature: 125 °C Number of cycles: 10 Endurance Solderability Pmax: 300 mW T: (65 ± 2) °C t: 1000 h IEC 60068-2-58 JIS C 0054 95 % of terminations wetted Solderability: (215 ± 3) °C / (3 ± 0,3) s (235 ± 5) °C / (2 ± 0,2) s Reflow soldering profile Wave soldering profile 61 No visible damage <5% Resistance to soldering heat: (260 ± 5) °C / (10 ± 1) s Resistance drift after soldering Remarks 05/02 <5% Herausgegeben von EPCOS AG Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND ++49 89 636 09, FAX (0 89) 636-2 26 89 ( EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY ++49 89 636 09, FAX (0 89) 636-2 26 89 ( EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.