Catalog 1308242 Issued 3-03 P&B KUP93 series General Purpose 3 to 10 Amp, Multicontact AC or DC Relay File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features • AC coils 24, 120 & 240V 50/60 Hz.; DC 12 & 24VDC. • Contact arrangement to 3PDT. • Sockets available for all models. • Accepted pin pattern for HVAC industry. • Primarily designed for the HVAC industry. Nominal Voltage DC Resistance in Ohms ± 10%* Must Operate Voltage Nominal Coil Current (mA) DC Coils 12 24 120 472 9.0 18.0 100 51 AC Coils 24 120 240 72 1,700 7,200 20.4 102.0 204.0 115 24 12 *AC coils, ± 15% Contact Data @ 25°C Material: Fine silver or silver-cadmium oxide. Operate Data @ 25°C Contact Ratings Material UL/CSA Ratings Life Expected Fine silver 5A @ 28VDC or 240VAC, 80% PF, 1/10 HP @ 120VAC, 1/4 HP @ 240VAC Silvercadmium oxide 10A @ 28VDC or 240VAC, 80% PF, 1/4 HP @ 120VAC,1/3 HP @ 240VAC 10 FLA, 30 LRA @ 120VAC, 5 FLA,15 LRA @ 240VAC 100,000 Must Operate Voltage: DC Coils: 75% of nominal voltage or less. AC Coils: 85% of nominal voltage or less. Operate Time (Excluding Bounce): 15 milliseconds, typical, at nominal voltage. Release Time (Excluding Bounce): DC Coils: 10 milliseconds, typical, at nominal voltage. AC Coils: 10 milliseconds, typical, at nominal voltage. 100,000 30,000 Environmental Data Temperature Range: Storage: All Coils: -45°C to +105°C. Operating: DC Coils: -45°C to +70°C. AC Coils: -45°C to +45°C. Initial Dielectric Strength Between Open Contacts: 500V rms. Between Adjacent Contacts: 1,500V rms. Between Contacts and Coil: 1,500V rms. Coil Data @ 25°C Nominal Power: DC Coils: 1.2 Watts. AC Coils: 2.7VA. Initial Insulation Resistance: 100 megohms, min., at 25°C. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: .187" x .020" quick connect. Enclosures: Clear polycarbonate dust cover. Weight: 3.0 oz. (86g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 731 Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B KUP93 11 A 2 1 -24 1. Type: KUP93 = Enclosed general purpose relay. 2. Contact Arrangement: 14 = 3 Form C (3PDT) 3. Coil Input: A = AC D = DC 4. Mounting: 1 = PLAIN CASE; 5. Terminals, Contact Material & Rating: 1 = .187" (4.75mm) quick connect, silver, 5 amps. 3 = .187" (4.75mm) quick connect, silver-cadmium oxide, 10 amps. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. Our authorized distributors are more likely to stock the following items for immediate delivery. No items in this series typically are stocked. Outline Dimensions Wiring Diagrams 3 Form C 1.406 MAX. (35.71) .187 TYP. (4.75) C2 1.531 MAX. (38.89) 1.906 MAX. (48.41) 2 3 1 C1 .054 DIA. (1.37) .250 (6.35) KUP93 Sockets Socket PC Board Layout (Component Side of Board) .218 REF. (5.54) .205 DIA. (5.21) (2 HOLES) .276 (7.01) 2.350 (59.69) 1.308 (33.22) 1.858 (47.19) 5 6 4 8 9 7 MTG. HOLE .157 ± .003 (3.99 ± .08) .338 (8.58) .395 (10.03) .790 20.07 .062 (1.57) .737 (18.72) 1.858 (47.19) .710 (18.03) .790 (20.07) 1.250 (31.75) .100 (2.54) .469 ± .015 (11.91 ± .38) .465 (11.81) .161 ± .005 (4.09 ± .13) DIA. (2) HOLES .097 ± .004 (2.46 ± .10) DIA. (11) HOLES .317 (8.05) KUP93 Socket Number Socket Color P C Socket With Terminals Natural Nylon 27E168** **UL Recognized, file E22575 Socket: Rated 10 amperes. Will accept .187" (4.75mm) quick-connect terminals of all KUP93 relays. Dimensions are shown for 732 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover.