MACOM NTHS50680RJ

Aluminium Housed Power Resistors
Type THS Series
Type THS Series
Characteristics - Electrical
THS - 10 Watts to 75 Watts
Tyco are the leading European
supplier of standard and custom
designed
aluminium
housed
resistors for general-purpose use,
power supplies, power generation
and the traction industry.
The THS is a range of extremely
stable, high quality wire wound
resistors capable of dissipating
high power in a limited space with
relatively low surface temperature.
The power is rapidly dissipated
as heat through the aluminium
housing to a specified heatsink.
The resistors are made from quality
materials for optimum reliability and
stability. Tyco can test resistors to
conform to relevant international,
MIL or customer specifications.
THS10
Dissipation @ 25°C with Heatsink (Watts):
10
Without Heatsink:
5.5
Ohmic Value Min (Ohms):
R01
Max:
10K
Max. Working Voltage (DC or ACrms) Volts:
160
Dielectric Strength (AC Peak) Volts:
1400
Stability (% resistance change, 1000 hours) (%): 1
Standard Heatsink - Area (mm2):
41500
Thickness (mm):
1
Number of Mounting Holes:
2 hole
THS15
15
8
R01
15K
265
1400
1
41500
1
2 hole
THS25
25
12.5
R01
36K
550
2500
1
53500
1
2 hole
THS50
50
20
R01
50K
1250
2500
1
53500
1
2 hole
THS75
75
40
R05
50K
1400
5000
2
99500
3
4 hole
Characteristics Electrical
Long Term Stability:
For improvements in long-term stability, resistors must be derated as
follows; for 50% of stated ΔR maximum dissipation must not exceed
70% of rating; for 25% of stated ΔR maximum, dissipation must not
exceed 50% of rating
Dry: 10,000MΩ minimum. After moisture test: 1000MΩ minimum.
Although the use of proprietary heat sinks with lower thermal
resistance is acceptable, up rating is not recommended.
The use of proprietary heat sink compound to improve thermal
conductivity is recommended for optimum performance of all sizes
Temperature coefficient below 100R, 50ppm/°C
Temperature coefficient above 100R, 30ppm/°C
Tolerance, 5% standard
Insulation Resistance:
Heat Dissipation:
Specification:
Key Features
■
■
■
■
■
Braking Resistor
Balancing Resistor
Capacitor Charging
& Discharging
Crowbar
Filter
Electrical Machinery
general use
Available through
Distribution
Literature No. 1773277
Issued: 03-08
THS75
8
4.0
10
5.0
Dimensions THS10 - THS50
M
L
H
T
■
7
THS25, 50
U
■
L
THS10, 15
P
Applications
Type
L
R
■
Product Specifications THS10 - THS75
J
■
Established product
with proven reliability
• Leading the way with
over 50 years of
design and
manufacturing
experience
10 Watts to 75 Watts
Versatile product
• Bench mark in
every industry
N
■
2 x Mounting Hole
THS10 - 2.4mm
THS25 - 3.3mm
THS15 - 2.4mm
THS50 - 3.3mm
Type
H±0.3
J±0.3
L Max
M Max
N Max
P Max
R Min
T±0.5
THS10
11.3
12.4
17.0
30.0
17.0
9.0
1.9
3.4
2.5
THS15
14.3
15.9
21.0
36.5
21.0
11.0
1.9
5.2
3.2
THS25
18.3
19.8
29.0
51.8
28.0
15.0
2.8
7.2
3.2
THS50
39.7
21.4
51.0
72.5
30.0
17.0
2.8
7.9
3.2
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
U Max
tycoelectronics.com
passives.tycoelectronics.com
Aluminium Housed Power Resistors
Type THS Series
Dimensions THS75
M
L
U
J
N
P
R
T
H
4 x Mounting Hole
HSC75 - 4.4mm
Type
H±0.3
J±0.3
K±0.2
L Max
M Max
N Max
P Max
R Min
T±0.5
U Max
THS75
29.0
37.0
4.4
49.0
71.0
47.5
26.0
5.0
11.5
3.5
Derating Curve THS10 to THS75
THS75
75
60
THS50
Power (W)
50
40
30
20
10
THS25
THS15
THS10
0
-25
0
25
50
75 100 125 150 175 200
Heatsink Temp. (degC)
225 250275
Pulse Energy THS10 to THS75
400
Pulse Energy (Joules)
350
300
250
200
150
100
50
0
0.01
0.1
1
10
100
1000
10000
100000
Resistance (Ohms)
THS10
Literature No. 1773277
Issued: 03-08
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
THS15
THS25
THS50
THS75
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com
Aluminium Housed Power Resistors
Type THS Series
Power Overload
Multiples of Rated Power
30
25
20
15
10
5
0
0.1 1 2
3
4
5
6 7 8 9 10 11 12 13 14 20 25 30 40 60
Duration of Overload (secs)
This graph indicates the amount that the rated power (at 20°C) of the
standard HS Series resistor may be increased for overloads of 100mS to 60S
Surface Temperature Rise
Surface Temp. Rise (°C)
200
THS50
THS25
THS75
100
THS15
THS10
0
0 20
60
100
150
200
250
300
Power Dissipation (Watts)
For resistor mounted on standard heatsink, related to power dissipation
How to Order
THS
50
680R
J
Common Part
Power Rating
Resistance Value
Tolerance
THS- Standard
NTHS - Low
Inductance
10
15
25
50
75
Watt
Watt
Watt
Watt
Watt
= THS10
= THS15
= THS25
= THS50
= THS75
0.1ohm
(100 mille ohms)
R10
J - 5%
1ohm
(1000 mille ohms)
1R0
1K
(1000 ohms)
1KO
Literature No. 1773277
Issued: 03-08
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com