TI TS3A24159DRCR

www.ti.com
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
FEATURES
1
•
•
•
•
•
•
•
•
2
•
DGS PACKAGE
(TOP VIEW)
Specified Break-Before-Make Switching
Low ON-State Resistance (0.3 Ω Max)
Low Charge Injection
Excellent ON-State Resistance Matching
Low Total Harmonic Distortion (THD)
1.65-V to 3.6-V Single-Supply Operation
Control Inputs Are 1.8-V Logic Compatible
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
V+
NO1 2
9
COM2
COM1 3
8
IN2
IN1 4
7
NC2
NC1 5
6
GND
DRC PACKAGE
(TOP VIEW)
V+ 1
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
10 NO2
1
Cell Phones
PDAs
Portable Instrumentation
Audio and Video Signal Routing
Low-Voltage Data-Acquisition Systems
Communication Circuits
Modems
Hard Drives
Computer Peripherals
Wireless Terminals and Peripherals
10 NO2
NO1 2
9
COM2
COM1 3
IN1 4
8
IN2
7
NC2
NC1 5
6
GND
YZP PACKAGE
(TOP-THROUGH VIEW)
D
C
B
A
3
2
1
YZP PACKAGE TERMINAL ASSIGNMENTS
D
NO2
V+
NO1
C
COM2
B
IN2
A
NC2
GND
NC1
3
2
1
COM1
IN1
DESCRIPTION/ORDERING INFORMATION
The TS3A24159 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V
to 3.6 V. It offers low ON-state resistance and excellent ON-state resistance matching with the
break-before-make feature, to prevent signal distortion during the transferring of a signal from one channel to
another. The device has excellent total harmonic distortion (THD) performance and consumes very low power.
These features make this device suitable for portable audio applications.
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2008, Texas Instruments Incorporated
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
ORDERING INFORMATION
TA
–40°C to 85°C
(1)
(2)
PACKAGE
(1) (2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
NanoFree™ (DSBGA) – YZP
Reel of 3000
TS3A24159YZPR
L87
VSSOP – DGS (MSOP)
Reel of 2500
TS3A24159DGSR
L8R
SON – DRC
Reel of 3000
TS3A24159DRCR
ZWS
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
SUMMARY OF CHARACTERISTICS (1)
Dual 2:1 Multiplexer/Demultiplexer
(2 × SPDT)
Configuration
Number of channels
2
ON-state resistance (ron)
0.3 Ω Max
ON-state resistance match (Δron)
0.05 Ω Max
ON-state resistance flatness (ron(flat))
0.04 Ω Max
Turn-on/turn-off time (tON/tOFF)
20 ns/12 ns
Break-before-make time (tBBM)
10 ns
Charge injection (QC)
9 pC
Bandwidth (BW)
23 MHz
OFF isolation (OISO)
–72 dB
Crosstalk (XTALK)
–96 dB
Total harmonic distortion (THD)
0.003%
Power-supply current (I+)
15 nA
Package options
(1)
10-pin MSOP, SON, DSBGA
V+ = 2.7 V, TA = 25°C
FUNCTION TABLE
2
IN
NC TO COM,
COM TO NC
NO TO COM,
COM TO NO
L
ON
OFF
H
OFF
ON
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
ABSOLUTE MAXIMUM RATINGS (1) (2)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
V+
Supply voltage range (3)
–0.5
3.6
V
VNC
VNO
VCOM
Analog voltage range (3) (4) (5)
–0.5
V+ + 0.5
V
II/OK
Analog port diode current
–50
50
INC
INO
ICOM
ON-state switch current
–300
300
–500
500
VI
Digital input voltage range
–0.5
3.6
VNC, VNO, VCOM < 0
ON-state peak switch current (6)
(3) (4)
IIK
Digital input clamp current
I+
Continuous current through V+
IGND
Continuous current through GND
θJA
Package thermal impedance (7)
Tstg
(1)
(2)
(3)
(4)
(5)
(6)
(7)
VNC, VNO, VCOM = 0 to V+
VI < 0
–50
–100
mA
V
mA
mA
DGS package
165
DRC package
56.5
YZP package
93
–65
mA
mA
100
Storage temperature range
UNIT
150
°C/W
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All voltages are with respect to ground, unless otherwise specified.
The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
This value is limited to 5.5 V maximum.
Pulse at 1-ms duration <10% duty cycle
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
3
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
ELECTRICAL CHARACTERISTICS FOR 3-V SUPPLY (1)
V+ = 2.7 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
0
V+
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance match
between channels
ON-state
resistance flatness
Δron
ron(flat)
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 10
25°C
VNO or VNC = 2 V,
ICOM = –100 mA,
Switch ON,
See Figure 10
25°C
VNO or VNC = 2 V, 0.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 10
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 10
VNO or VNC = 2 V, 0.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 10
NC, NO
OFF leakage
current
INC(OFF),
INO(OFF)
VNC or VNO = 1 V, VCOM = 3 V,
or
VNC or VNO = 3 V, VCOM = 1 V,
Switch OFF,
See Figure 11
NC, NO
ON leakage
current
INC(ON),
INO(ON)
VNC or VNO = 1 V, VCOM = Open,
or
VNC or VNO = 3 V, VCOM = Open,
Switch ON,
See Figure 12
COM
ON leakage
current
ICOM(ON)
VNC or VNO = Open, VCOM = 1 V,
or
VNC or VNO = Open, VCOM = 3 V,
Switch ON,
See Figure 12
Full
Full
0.2
2.7 V
0.26
2.7 V
0.01
2.7 V
0.01
Full
Full
3.6 V
25°C
Full
3.6 V
25°C
Full
0.04
0.05
25°C
3.6 V
Ω
Ω
Ω
0.13
2.7 V
Ω
0.05
0.05
25°C
25°C
0.3
0.34
25°C
Full
0.3
0.35
V
–10
10
–50
50
–10
10
–100
100
–10
10
–100
100
Ω
nA
nA
nA
Digital Control Inputs (IN1, IN2) (2)
Input logic high
VIH
Full
Input logic low
VIL
Full
Input leakage
current
(1)
(2)
4
IIH, IIL
25°C
VI = 3.6 V or 0
Full
1.4
V
0.5
3.6 V
–40
–50
5
40
50
V
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
ELECTRICAL CHARACTERISTICS FOR 3-V SUPPLY (continued)
V+ = 2.7 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 14
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 14
Break-beforemake time
tBBM
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 15
Charge injection
QC
VGEN = 0,
RGEN = 0,
NC, NO
OFF capacitance
CNC(OFF),
CNO(OFF)
NC, NO
ON capacitance
COM
ON capacitance
Digital input
capacitance
25°C
3V
Full
2.7 V to
3.6 V
25°C
3V
Full
2.7 V to
3.6 V
20
35
40
12
25
30
10
ns
25°C
3V
Full
2.7 V to
3.6 V
CL = 1 nF,
See Figure 19
25°C
3V
9
pC
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 13
25°C
3V
90
pF
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 13
25°C
3V
224
pF
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 13
25°C
3V
250
pF
VI = V+ or GND,
See Figure 13
25°C
3V
2
pF
CI
1
ns
0.5
25
30
ns
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 16
25°C
3V
23
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
See Figure 17
25°C
3V
–72
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
See Figure 18
25°C
3V
–96
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20
kHz,
See Figure 20
25°C
3V
0.00
3
%
25°C
3.6 V
Supply
Positive supply
current
I+
VI = V+ or GND
Full
15
100
1
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
nA
µA
5
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1)
V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
0
V+
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance match
between channels
ON-state
resistance flatness
Δron
ron(flat)
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –8 mA,
Switch ON,
See Figure 10
25°C
VNO or VNC = 1.8 V,
ICOM = –8 mA,
Switch ON,
See Figure 10
25°C
VNO or VNC = 1.8 V, 0.8 V,
ICOM = –8 mA,
Switch ON,
See Figure 10
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –8 mA,
Switch ON,
See Figure 10
VNO or VNC = 0.8 V, 1.8 V,
ICOM = –8 mA,
Switch ON,
See Figure 10
Full
Full
0.45
2.3 V
0.4
25°C
Full
2.3 V
25°C
25°C
0.01
0.05
0.05
0.05
INC(OFF),
INO(OFF)
VNC or VNO = 0.5 V, VCOM = 2.2 V,
or
VNC or VNO = 2.2 V, VCOM = 0.5 V,
NC, NO
ON leakage
current
INC(ON),
INO(ON)
VNC or VNO = 0.5 V, VCOM = Open,
Switch ON,
or
See Figure 12
VNC or VNO = 2.2 V, VCOM = Open,
25°C
COM
ON leakage
current
VNC or VNO = Open, VCOM = 0.5 V,
Switch ON,
or
See Figure 12
VNC or VNO = Open, VCOM = 2.2 V,
25°C
ICOM(ON)
Full
Full
Ω
Ω
0.03
0.08
Ω
0.1
25°C
Full
Ω
0.05
2.3 V
Full
NC, NO
OFF leakage
current
Switch OFF,
See Figure 11
0.35
2.3 V
V
2.7 V
2.7 V
2.7 V
–10
10
–50
50
–10
10
–100
100
–10
10
–100
100
nA
nA
nA
Digital Control Inputs (IN1, IN2) (2)
Input logic high
VIH
Full
Input logic low
VIL
Full
Input leakage
current
(1)
(2)
6
IIH, IIL
25°C
VI = 2.7 V or 0
Full
1.25
V
0.5
2.7 V
–40
–50
5
40
50
V
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (continued)
V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 14
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 14
Break-beforemake time
tBBM
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 15
Charge injection
QC
VGEN = 0,
RGEN = 0,
NC, NO
OFF capacitance
CNC(OFF),
CNO(OFF)
NC, NO
ON capacitance
COM
ON capacitance
Digital input
capacitance
25°C
2.5 V
Full
2.3 V to
2.7 V
25°C
2.5 V
Full
2.3 V to
2.7 V
23
45
50
17
27
30
ns
25°C
2.5 V
2
Full
2.3 V to
2.7 V
1
CL = 1 nF,
See Figure 19
25°C
2.5 V
8
pC
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 13
25°C
2.5 V
90
pF
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 13
25°C
2.5 V
250
pF
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 13
25°C
2.5 V
250
pF
VI = V+ or GND,
See Figure 13
25°C
2.5 V
2
pF
CI
14
ns
30
35
ns
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 16
25°C
2.5 V
23
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
See Figure 17
25°C
2.5 V
–72
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
See Figure 18
25°C
2.5 V
–96
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20
kHz,
See Figure 20
25°C
2.5 V
0.00
3
%
Supply
Positive supply
current
I+
VI = V+ or GND
25°C
Full
2.7 V
10
100
700
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
nA
7
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (1)
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
0
V+
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance match
between
channels
ON-state
resistance
flatness
NC, NO
OFF leakage
current
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –2 mA,
Switch ON,
See Figure 10
25°C
VNO or VNC = 1.5 V,
ICOM = –2 mA,
Switch ON,
See Figure 10
25°C
VNO or VNC = 0.6 V, 1.5 V,
ICOM = –2 mA,
Switch ON,
See Figure 10
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –2 mA,
Switch ON,
See Figure 10
VNO or VNC = 0.6 V, 1.5 V,
ICOM = –8 mA,
Switch ON,
See Figure 10
Full
Full
0.4
1.65 V
0.8
0.3
1.65 V
ron(flat)
INC(OFF),
INO(OFF)
VNC or VNO = 0.3 V, VCOM = 1.65 V,
or
VNC or VNO = 1.65 V, VCOM = 0.3 V,
Switch OFF,
See Figure 11
NC, NO
ON leakage
current
INC(ON),
INO(ON)
VNC or VNO = 0.3 V, VCOM = Open,
or
VNC or VNO = 1.65 V, VCOM = Open,
Switch ON,
See Figure 12
COM
ON leakage
current
ICOM(ON)
VNC or VNO = Open, VCOM = 0.3 V,
or
VNC or VNO = Open, VCOM = 1.65 V,
Switch ON,
See Figure 12
Full
0.02
1.65 V
1.65 V
0.08
Full
1.95
1.95 V
25°C
Full
Ω
0.15
Ω
0.2
25°C
Full
Ω
0.13
25°C
Full
Ω
0.04
0.05
25°C
25°C
0.45
0.5
25°C
Δron
0.9
V
1.95 V
–10
10
–50
50
–10
10
–100
100
–10
10
–100
100
nA
nA
nA
Digital Control Inputs (IN1, IN2) (2)
Input logic high
VIH
Full
Input logic low
VIL
Full
Input leakage
current
IIH, IIL
(1)
(2)
8
25°C
VI = 1.95 V or 0
Full
1
V
0.4
1.95 V
–40
–50
5
40
50
V
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (continued)
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
UNIT
Dynamic
25°C
1.8 V
Full
1.65 V
to
1.95 V
25°C
1.8 V
Full
1.65 V
to
1.95 V
25°C
1.8 V
2
Full
1.65 V
to
1.95 V
1
CL = 1 nF,
See Figure 19
25°C
1.8 V
5
pC
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 13
25°C
1.8 V
90
pF
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 13
25°C
1.8 V
250
pF
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 13
25°C
1.8 V
250
pF
VI = V+ or GND,
See Figure 13
25°C
1.8 V
2
pF
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 14
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 14
Break-beforemake time
tBBM
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 15
Charge injection
QC
VGEN = 0,
RGEN = 0,
NC, NO
OFF capacitance
CNC(OFF),
CNO(OFF)
NC, NO
ON capacitance
COM
ON capacitance
Turn-on time
Turn-off time
Digital input
capacitance
CI
53
75
30
24
35
40
30
ns
ns
40
50
ns
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 16
25°C
1.8 V
23
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
See Figure 17
25°C
1.8 V
–73
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
See Figure 18
25°C
1.8 V
–97
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20
kHz,
See Figure 20
25°C
1.8 V
0.00
5
%
Supply
Positive supply
current
I+
25°C
VI = V+ or GND
Full
1.95 V
100
50
700
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
nA
9
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
TYPICAL PERFORMANCE
0.500
0.400
0.450
0.350
0.400
0.300
0.350
0.250
ron (Ω)
ron (Ω)
0.300
0.250
0.200
0.200
0.150
0.150
–40°C
0.100
–40°C
0.100
25°C
25°C
0.050
0.050
85°C
85°C
VCOM (V)
VCOM (V)
Figure 1. ron vs VCOM
(V+ = 1.65 V)
Figure 2. ron vs VCOM
(V+ = 2.3 V)
0.350
50
0.300
0
2.21
2.07
1.93
1.79
1.66
1.52
1.38
1.24
1 .10
0.97
0.8 3
0.69
0.55
0 .41
0.28
0.00
1.58
1.49
1.39
1.29
1.19
1.09
0.99
0.89
0 .79
0.69
0.5 9
0.50
0.40
0 .30
0.20
0.10
0.00
0.000
0.14
0.000
1.8 V
2.5 V
3V
0.250
-50
QC (pC)
ron (Ω)
0.200
0.150
0.100
–100
–150
–40°C
–200
25°C
0.050
85°C
–250
VCOM (V)
2.59
2.43
2.27
2.11
1.94
1.78
1.62
1.46
1 .30
1.13
0.9 7
0.81
0.65
0 .49
0.32
0.16
0.00
0.000
–300
0
0.3
Figure 3. ron vs VCOM
(V+ = 2.7 V)
10
0.6
0.9
1.2
1.5
1.8
VCOM (V)
2.1
2.4
2.5
2.7
3.0
Figure 4. Charge Injection (QC) vs VCOM
(TA = 25°C)
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
35
0
3.0 V
tON
30
–2
tOFF
–4
25
Gain (dB)
tON/tOFF (ns)
–6
20
15
10
–8
–10
–12
–14
5
–16
0
1.65
1.8
1.95
2.3
2.5
2.7
3
3.3
3.6
–18
Supply Voltage (V+)
–20
1E+04
1E+05
1E+06
1E+07
1E+09
1E+08
Frequency (Hz)
Figure 5. tON and tOFF vs Supply Voltage
(TA = 25°C)
Figure 6. Bandwidth
0
0
–10
–20
–30
–40
–40
Attenuation (dB)
Attenuation (dB)
–20
–50
–60
1.8 V
–70
2.5 V
–80
–90
–60
–80
3.0 V
1.8V
–100
1E+04
1E+05
1E+06
1E+07
1E+08
2.5V
1E+09
3.0V
Frequency (Hz)
–120
1E+04
1E+05
1E+06
1E+07
1E+08
1E+09
Frequency (Hz)
Figure 7. OFF Isolation
Figure 8. Crosstalk
0.009
0.008
0.007
THD (%)
0.006
0.005
0.004
0.003
0.002
1.8 V
2.5 V
0.001
3.0 V
0.000
1E+00
1E+01
1E+02
1E+03
1E+04
1E+05
Frequency (Hz)
Figure 9. Total Harmonic Distortion vs Frequency
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
11
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
PARAMETER MEASUREMENT INFORMATION
V+
VNC NC
COM
+
VCOM
VNO NO
Channel ON
r on =
IN
VI
ICOM
VCOM –VNO or VNC
W
I COM
VI = V IH or V IL
+
GND
Figure 10. ON-State Resistance
V+
VNC NC
COM
+
VCOM
+
VNO NO
IN
VI
OFF-State Leakage Current
Channel OFF
VI = V IH or V IL
+
GND
Figure 11. OFF-State Leakage Current
(INC(OFF), INC(PWROFF), INO(OFF), INO(PWROFF), ICOM(OFF), ICOM(PWROFF))
V+
VNC NC
COM
+
VNO NO
VI
VCOM
ON-State Leakage Current
Channel ON
VI = V IH or V IL
IN
+
GND
Figure 12. ON-State Leakage Current (ICOM(ON), INC(ON), INO(ON))
12
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
PARAMETER MEASUREMENT INFORMATION (continued)
V+
VNC NC
COM
+
VNO NO
VCOM
ON-State Leakage Current
Channel ON
VI = V IH or V IL
IN
VI
+
GND
Figure 13. Capacitance (CI, CNC(OFF), CNO(OFF), CNC(ON), CNO(ON))
V+
VCOM
NC or NO
VNC or V NO
NC or NO
CL(2)
TEST
RL
CL
VCOM
tON
50 Ω
35 pF
V+
tOFF
50 Ω
35 pF
V+
COM
RL
IN
VI
CL(2)
(1)
GND
RL
V+
Logic
Input
(VI)
50%
50%
0
tON
tOFF
90%
90%
(VNC or V NO)
(1)
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
(2)
CL includes probe and jig capacitance.
Figure 14. Turn-On (tON) and Turn-Off Time (tOFF)
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
13
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
PARAMETER MEASUREMENT INFORMATION (continued)
V+
NC or NO
V+
Logic
Input
(VI)
VNC or V NO
VCOM
50%
0
COM
NC or NO
CL(2)
VI
90%
RL
90%
(VCOM)
IN
tBBM
Logic
Input(1)
VNC or VNO = V+
RL = 50 W
CL = 35 pF
GND
(1)
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
(2)
CL includes probe and jig capacitance.
Figure 15. Break-Before-Make Time (tBBM)
V+
Network Analyzer
50 VNC
NC
Channel ON: NC to COM
COM
Source
Signal
VCOM
VI = V+ or GND
NO
Network Analyzer Setup
50 VI
+
IN
Source Power = 0 dBm
(632-mV P-P at 50- load)
GND
DC Bias = 350 mV
Figure 16. Bandwidth (BW)
14
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
PARAMETER MEASUREMENT INFORMATION (continued)
V+
Network Analyzer
Channel OFF: NC to COM
50 VNC NC
VI = V + or GND
COM
Source
Signal
50 VCOM
NO
Network Analyzer Setup
IN
Source Power = 0 dBm
(632-mV P-P at 50- load)
VI
50 +
GND
DC Bias = 350 mV
Figure 17. OFF Isolation (OISO)
V+
Network Analyzer
Channel ON: NC to COM
50 VNC
Channel OFF: NO to COM
NC
VCOM
Source
Signal
VNO
NO
VI
50 VI = V+ or GND
+
50 IN
GND
Network Analyzer Setup
Source Power = 0 dBm
(632-mV P-P at 50- load)
DC Bias = 350 mV
Figure 18. Crosstalk (XTALK)
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
15
TS3A24159
0.3-Ω DUAL SPDT ANALOG SWITCH
DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008
PARAMETER MEASUREMENT INFORMATION (continued)
V+
RGEN
VGEN
OFF
ON
OFF V
IL
NC or NO
COM
+
VIH
Logic
Input
(VI)
VCOM
∆VCOM
VCOM
NC or NO
CL(2)
VI
VGEN = 0 to V+
IN
Logic
Input(1)
RGEN = 0
CL = 1 nF
QC = C L ×⋅∆VCOM
VI = V IH or V IL
GND
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
B.
CL includes probe and jig capacitance.
Figure 19. Charge Injection (QC)
VI = V IH or V IL
Channel ON: COM to NO
VSOURCE = V+ P-P
Source Signal = 20 Hz to 20 kHz
RL = 600 W
CL = 50 pF
V+/2
V+
Audio Analyzer
RL
Source
Signal
10 mF
NO
10 mF
COM
600 W
600 W
CL(1)
VI
IN
GND
600 W
A.
CL includes probe and jig capacitance.
Figure 20. Total Harmonic Distortion (THD)
16
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TS3A24159
PACKAGE OPTION ADDENDUM
www.ti.com
22-Jul-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TS3A24159DGSR
ACTIVE
MSOP
DGS
10
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS3A24159DGSRG4
ACTIVE
MSOP
DGS
10
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS3A24159DRCR
ACTIVE
SON
DRC
10
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
TS3A24159DRCRG4
ACTIVE
SON
DRC
10
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
TS3A24159YZPR
ACTIVE
DSBGA
YZP
10
3000 Green (RoHS &
no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
21-Aug-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
TS3A24159DGSR
Package Package Pins
Type Drawing
SPQ
Reel
Reel
Diameter Width
(mm) W1 (mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
3.4
1.4
8.0
12.0
Q1
MSOP
DGS
10
2500
330.0
13.0
5.3
TS3A24159DRCR
SON
DRC
10
3000
330.0
12.4
3.3
3.3
1.1
8.0
12.0
Q2
TS3A24159YZPR
DSBGA
YZP
10
3000
180.0
8.4
1.5
2.03
0.7
4.0
8.0
Q2
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
21-Aug-2008
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TS3A24159DGSR
MSOP
DGS
10
2500
358.0
335.0
35.0
TS3A24159DRCR
SON
DRC
10
3000
346.0
346.0
29.0
TS3A24159YZPR
DSBGA
YZP
10
3000
220.0
220.0
34.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated