HLG-80H-C 90W Single Output LED Power Supply ¡¡E¡½ E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E series Features : Constant current design Universal AC input / Full range (up to 305VAC) Built-in active PFC function High efficiency up to 91.5% Protections: Short circuit / Over voltage / Over temperature Cooling by free air convection Output current adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (1~10Vdc or 10V PWM signal or resistance) Suitable for dry / damp / wet locations 5 years warranty (Note.5) 110 F HLG-80H-C350 A M M IP65 IP67 A : IP65 rated. Constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL RATED CURRENT HLG-80H-C350 HLG-80H-C700 350mA 700mA ¡Ó5.0% CURRENT ACCURACY CONSTANT CURRENT REGION Note.6 A type : 128V ~ 257V RATED POWER RIPPLE CURRENT OUTPUT RIPPLE & NOISE CURRENT ADJ. RANGE PROTECTION ¡Ó5% 1Vp-p 0.5Vp-p B type : 84V ~ 129V Can be adjusted by internal potentiometer A type only 210 ~ 350mA 420 ~ 700mA ¡Ó1% SETUP, RISE TIME 1800ms, 80ms at full load VOLTAGE RANGE A type : 64V ~ 129V 90.3W LINE REGULATION 16ms at full load HOLD UP TIME (Typ.) INPUT B type : 167V ~ 257V 89.95W Note.2 90 ~ 305VAC ¡Ó1% 230VAC /115VAC 230VAC / 115VAC 127VDC ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 91.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.88A / 115VAC 0.45A / 230VAC 0.38A / 277VAC COLD START 60A(twidth=410 s measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC 91.5% £g SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 300 ~ 340V 150 ~ 170V Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE 85 10 (RTH2) Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. -40 ~ +70 WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION ¢J ¡Ó ¢J ¢J (Refer to "Derating Curve") 10 ~ 95% RH non-condensing ¢J ¡Ó0.03%/¢J (0 ~ 50¢J) -40 ~ +80 , 10 ~ 95% RH 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 approved SAFETY & EMC WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3 EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE I/P-FG:2KVAC O/P-FG:0.5KVAC ¡Ù ¢J Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, heavy industry level (surge L,N-FG: 4KV), criteria A 309.7K hrs min. MIL-HDBK-217F (25 ) 195.6*61.5*38.8 mm (L*W*H) 0.84Kg; 16pcs/14.4Kg/0.54CUFT ¢J ¢J 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Derating may be needed under low input voltages. Please check the static characteristics for more details. 3. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1. 4. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 5. Refer to warranty statement. 6. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. File Name:HLG-80H-C-SPEC 2012-12-26 HLG-80H-C 90W Single Output LED Power Supply Mechanical Specification Case No.997A series Unit:mm A Type:(HLG-80H-C_A) 195.6 171.8 12 9.6 ¡Ó ¡Ó ¡Ñ T case 30.75 SJTW 16AWG 3C 61.5 300 20 32 46.5 300 20 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) 85.9 Io ADJ. ¡Ñ +V(Red) -V(Black) SJTW 16AWG 2C £r4.2¡Ñ4PL 38.8 ¡° T case: Max. Case Temperature. ¡° IP65 rated. Constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) B Type:(HLG-80H-C_B) 195.6 171.8 12 9.6 ¡Ó 300 20 ¡Ó T case 30.75 85.9 ¡Ñ SJTW 16AWG¡Ñ2C SJTW 16AWG 2C +V(Red) -V(Black) DIM+(Blue) DIM-(White) £r4.2¡Ñ4PL ¡° T case: Max. Case Temperature. 38.8 ¡Ñ SJTW 16AWG 3C 61.5 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) 32 46.5 300 20 File Name:HLG-80H-C-SPEC 2012-12-26 HLG-80H-C 90W Single Output LED Power Supply series D Type:(HLG-80H-C_D) 195.6 171.8 12 9.6 ¡Ó ¡Ó 300 20 ¡Ñ 85.9 +V(Red) -V(Black) ¡Ñ SJTW 16AWG 2C 30.75 SJTW 16AWG 3C T case 61.5 32 46.5 300 20 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) £r4.2¡Ñ4PL 38.8 ¡° T case: Max. Case Temperature. ¡° IP67 rated. Timer dimming function, contact MEAN WELL for details. Block Diagram PFC fosc : 70KHz PWM fosc : 60KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DIM+ DIM(B Type) O.L.P. O.T.P. FG O.L.P. DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -40 -30 -15 0 15 30 50 ¢J AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 90 100 125 135 145 155 165 175 180 200 230 305 INPUT VOLTAGE (V) 60Hz File Name:HLG-80H-C-SPEC 2012-12-26 HLG-80H-C 90W Single Output LED Power Supply series Power Factor Characteristic Constant Current Mode 1 0 .9 9 0 .9 8 0 .9 7 0 .9 6 PF 0 .9 5 277VAC 0 .9 4 230VAC 0 .9 3 115VAC 0 .9 2 0 .9 1 0 .9 0 .8 9 0 .8 8 50% 60% 70% 80% 90% 100% (90W) LOAD EFFICIENCY vs LOAD (HLG-80H-C700A Model) EFFICIENCY (%) HLG-80H-C series possess superior working efficiency that up to 92% can be reached in field applications. 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 277VAC 230VAC 115VAC 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE A typical LED power supply may work in "constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CC characteristic can be operated at CC mode (direct drive, at area (A)). (A) Constant Current area Vo(%) 100 50 (max.) (B) Hiccup Protection 50 95 Io (%) Typical LED power supply I-V curve File Name:HLG-80H-C-SPEC 2012-12-26 HLG-80H-C 90W Single Output LED Power Supply series DIMMING OPERATION (for B-type only) +V(Red) -V(Black) AC/L(Brown) AC/N(Blue) FG (Green/Yellow) HLG-80H-C DIM+(Blue) DIM-(White) ¡° Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. ¡° Please DO NOT connect "DIM-" to "-V". ¡° Reference resistance value for output current adjustment (Typical) [£ £[ £[ £[ £[ [£ £[ [ £ £ [ £ [ £[ £[ [£ £[ [ £ £ [ [£ £[ [£ £[ OPEN 90K 100K 80K 70K 50K 10K Single driver 40K 60K 30K 20K Resistance Multiple drivers value (N=driver quantity for synchronized 10K /N 20K /N 30K /N 40K /N 50K /N 60K /N 70K /N 80K /N 90K /N 100K /N dimming operation) ----- Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ¡° 1 ~ 10V dimming function for output current adjustment (Typical) ¡° 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz ¡ Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to ° achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. ¡°Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. Dimming connection diagram for turning the lighting fixture ON/OFF : N FG L Switch Relay Adjuster 0~100K Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L HLG-80H-C B Type AC/N DIM+ DIMV(-) V(+) Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/OFF the lighting fixture. 1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLG-80H-C-SPEC 2012-12-26 HLG-80H-C 90W Single Output LED Power Supply series WATERPROOF CONNECTION ¡· Waterproof connector Waterproof connector can be assembled on the output cable of HLG-80H-C to operate in dry/wet/damp or outdoor environment. AC source HLG-80H-C I/P Size O/P Pin Configuration (Female) M12 Order No. Suitable Current 4-PIN 5A/PIN M12-04 10A max. 5-PIN 5A/PIN M12-05 10A max. Size Pin Configuration (Female) M15 2-PIN 12A/PIN M15-02 12A max. Order No. Suitable Current LED Lamp ¡· Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 £r25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-80H-C O/P Wires ¡°CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. File Name:HLG-80H-C-SPEC 2012-12-26