MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY> M81049P/SP/FP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR DESCRIPTION M81049 is octal D-type flip-flop driver by 20-pin package. It has 8 same circuit units which is composed of D-type flip-flop logic circuit and high voltage NchMOS output transistor. M81049 has a common direct clear input and a common clock input. PIN CONFIGURATION (TOP VIEW) CLR 1 20 VDD D1 2 19 Y1 D2 3 18 Y2 D3 4 17 Y3 D4 5 16 Y4 D5 6 15 Y5 D6 7 14 Y6 D7 8 13 Y7 D8 9 12 Y8 CLK 10 11 GND INPUT OUTPUT FEATURES ● Lineup with three packages ● High breakdown voltage (BVDSX ≥ 40V) ● Drain output current (IDS(max) = 200mA) ● With input protection diodes ● Pin assignment of input-output flow through ● Wide operating temperature range (Ta = –40 to +85°C) Package type 20P4(P) 20P4B(SP) 20P2N(FP) APPLICATION LED drive FUNCTION The common direct clear input and common clock input are connected to every circuit unit by the same way. Signal at the D inputs is transferred to Y outputs by D-type flip-flops on the positive-going edge of the clock pulse. If CLR is set to “L”, outputs Y1-Y8 will be altogether set to “H” regardless of D1-D8 and CLK. The maximum drain current of an output is 200mA. The maximum between drain-source is 40V. LOGIC DIAGRAM (POSITIVE LOGIC) Y1 19 Y2 18 Y3 17 Y4 16 Y5 15 Y6 14 Y7 13 Y8 12 20 VDD D D Q CK CLK 10 D Q CK R D Q CK R D Q CK R D Q CK R D Q CK R D Q CK R Q CK R R CLR 1 11 GND 2 D1 3 D2 4 D3 5 D4 6 D5 7 D6 8 D7 9 D8 Jun. 2009 MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY> M81049P/SP/FP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR FUNCTION TABLE (EACH CHANNEL) INPUT ↑ ↓ H L 5V OUTPUT : Y CLR CLK D L X X H H ↑ L H H H L H ↑ L X Latched H ↓ X Latched : : : : TIMING DIAGRAM CLK GND 5V D GND 5V “L” to “H” “H” to “L” High level Low level CLR GND VOH Y X : Irrelevant VOL ABSOLUTE MAXIMUM RATINGS Symbol VDD VDS Supply voltage Drain-to-source voltage VI IDS Input voltage Drain output current Pd Power dissipation (Unless otherwise noted, Ta = –40 ~ +85°C) Parameter Ratings 7 –0.5 ~ +40 Conditions Output, H Current per circuit output, L Ta = 25°C, when mounted on board M81049P M81049SP M81049FP Topr Operating temperature Tstg Storage temperature RECOMMENDED OPERATING CONDITIONS Symbol VDD VDS VIH VIL Conditions IDS SP FP VIN t r,t f t su th tw f Input voltage Rise time, Fall time, drain output Setup time before CLK ↑ Hold time, data after CLK ↑ Pulse duration Clock frequency V 200 1.79 mA 1.47 1.10 W –40 ~ +85 –55 ~ +125 °C °C Limits Unit min typ max 4.5 0 0.7VDD 5.0 — 0 0 — 0 0 0 0 0 0 — 5.5 40 VDD 0.3VDD 200 140 VDD = 4.5V VDD = 4.5V 0 20 — VDD = 4.5V VDD = 4.5V VDD = 4.5V 5 40 — — Supply voltage Drain-to-source voltage “H” input voltage “L” input voltage Drain output current (Current per 1 circuit when 8 circuits are coming on simultaneously) V –0.5 ~ VDD (Unless otherwise noted, Ta = –40 ~ +85°C) Parameter P Unit V Duty Cycle no more than 48% Duty Cycle no more than 100% Duty Cycle no more than 40% Duty Cycle no more than 100% Duty Cycle no more than 33% Duty Cycle no more than 100% — — — — — — — 200 125 200 115 VDD — 500 — — — — 20 — V V V V mA V ns ns ns ns MHz Jun. 2009 2 MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY> M81049P/SP/FP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR ELECTRICAL CHARACTERISTICS Symbol (Unless otherwise noted, VDD = 5V, Ta = 25°C) Parameter Test conditions V(BR)DSX IDSX IIH Drain-source breakdown voltage Drain-source leakage current “H” input current IIL “L” input current ICC Supply current VDS “L” output voltage RDS(on) Drain-source on-state resistance SWITCHING CHARACTERISTICS Symbol Limits min typ max — Unit IDS = 1mA VDS = 40V 40 — — 0.002 VDD = 5.5V, VI = 5.5V VDD = 5.5V, VI = 0V — 0.005 1 V µA µA — 0.005 –1 µA All outputs off VDD = 5.5V All outputs on VI = 5.5V or 0V IDS = 100mA, VDD = 4.5V IDS = 200mA, VDD = 4.5V IDS = 100mA, VDD = 4.5V — 0.005 5 — 0.005 5 µA — 0.29 0.44 — 0.59 0.88 — 2.9 4.4 5 V Ω (VDD = 5V, Ta = 25°C) Parameter t TLH t THL Low-level to high-level and high-level to low-level output transition time t PLH t PHL Low-level to high-level and high-level to low-level output propagation time (CLK-Y) t PLH(R) Low-level to high-level output propagation time (CLR-Y) Test conditions CL = 30pF (Note 1) Limits Unit min typ max — 11 — — 3 — — 32 — — 26 — ns ns — 32 — ns ns ns Jun. 2009 3 MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY> M81049P/SP/FP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR NOTE 1 TEST CIRCUIT VDD CLR PG D PG CLK VCC RL VDD (1) Pulse generator (PG) characteristics : PRR = 1MHz, Duty Cycle = 50%, t r = 6ns, t f = 6ns, Zo = 50Ω, VI = 5V OUTPUT Y (2) Output conditions : RL = 240Ω, VCC = 24V, VDD = 5V (3) Electrostatic capacity CL includes floating capacitance at connections and input capacitance at probes. GND CL TIMING DIAGRAM 5V D GND 5V CLK 50% 50% GND tPHL tPLH 50% 10% Y VCC 90% 90% 50% 10% tTHL VOL tTLH SWITCHING TIMES tr tf 90% 50% CLK 5V 90% 50% 10% 10% GND tw 5V D 50% tsu th 50% GND INPUT SETUP AND HOLD WAVEFORMS Jun. 2009 4 MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY> M81049P/SP/FP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR TYPICAL CHARACTERISTICS Drain-Source On-State Resistance vs Drain Current Characteristics Thermal Derating Factor Characteristics 2.0 5 VDD=4.5V M81049SP M81049FP 1.0 0.931 0.764 0.572 0.5 0 0 25 50 75 85 Drain Current IDS (mA) Drain Current IDS (mA) • The drain current values represent the current per circuit. • Repeated frequency ≥ 10Hz • The value the circle represents the value of the simultaneously-operated circuit. • Ta=25°C 20 40 60 80 200 ①∼④ 160 ⑤ ⑥ ⑦ ⑧ 120 80 • The drain current values represent the current per circuit. • Repeated frequency ≥ 10Hz • The value the circle represents the 40 value of the simultaneously-operated circuit. • Ta=85°C 0 20 40 60 80 Duty Cycle (%) Duty Cycle (%) Duty Cycle-Drain Current Characteristics (M81049SP) Duty Cycle-Drain Current Characteristics (M81049SP) ①∼⑦ ⑧ 80 • The drain current values represent the current per circuit. • Repeated frequency ≥ 10Hz • The value the circle represents the value of the simultaneously-operated circuit. • Ta=25°C 40 60 80 ①∼③ ④ 120 20 100 200 160 0 1 0 100 200 0 Ta=–40℃ 2 Duty Cycle-Drain Current Characteristics (M81049P) 80 40 Ta=25℃ Duty Cycle-Drain Current Characteristics (M81049P) 120 0 3 Drain Current IDS (mA) 160 0 Ta=85℃ Ambient Temperature Ta (°C) ①∼⑧ 40 4 0 0 10 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103 100 200 Drain Current IDS (mA) Drain-Source On-State Resistance RDS(ON) (Ω) 1.5 Drain Current IDS (mA) Power Dissipation Pd (W) M81049P ⑤ ⑥ ⑦ ⑧ 160 120 80 • The drain current values represent the current per circuit. • Repeated frequency ≥ 10Hz • The value the circle represents the 40 value of the simultaneously-operated circuit. 0 100 • Ta=85°C 0 20 40 60 80 100 Duty Cycle (%) Duty Cycle (%) Jun. 2009 5 MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY> M81049P/SP/FP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR Duty Cycle-Drain Current Characteristics (M81049FP) ①∼⑤ ⑥ ⑦ ⑧ 160 120 80 • The drain current values represent the current per circuit. • Repeated frequency ≥ 10Hz • The value the circle represents the value of the simultaneously-operated circuit. • Ta=25°C 40 0 0 20 40 60 80 ④ 160 ⑤ ⑥ ⑦ ⑧ 120 80 • The drain current values represent the current per circuit. • Repeated frequency ≥ 10Hz • The value the circle represents the 40 value of the simultaneously-operated circuit. 0 100 • Ta=85°C 0 20 Duty Cycle (%) 50 Switching Time (ns) Switching Time (ns) t PLH,t PLH(R) t PHL 20 t TLH 20 40 60 3 2 100 80 t TLH 102 7 5 t PLH 3 2 t PHL 101 7 5 3 2 t THL 0 80 7 VCC=24V,VDD=5V,Ta=25℃ 5 40 0 –40 –20 60 Switching Time-Drain Current Characteristics 103 RL=240Ω,VCC=24V,VDD=5V 10 40 Duty Cycle (%) Switching Time-Ambient Temperature Characteristics 30 ①∼② ③ 200 Drain Current IDS (mA) 200 Drain Current IDS (mA) Duty Cycle-Drain Current Characteristics (M81049FP) t THL 100 1 10 2 100 3 5 7 102 2 3 5 7 103 Drain Current IDS (mA) Ambient Temperature Ta (°C) Jun. 2009 6 MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY> M81049P/SP/FP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR 20P4 Plastic 20pin 300mil DIP EIAJ Package Code DIP20-P-300-2.54 Weight(g) 1.3 Lead Material Alloy 42/Cu Alloy 11 1 10 E 20 e1 c JEDEC Code – Symbol A A2 D L A1 SEATING PLANE e b1 b b2 A A1 A2 b b1 b2 c D E e e1 L 20P4B Dimension in Millimeters Min Nom Max – – 4.5 0.51 – – – 3.3 – 0.4 0.5 0.6 1.4 1.5 1.8 0.9 1.0 1.3 0.22 0.27 0.34 23.8 24.0 24.2 6.15 6.3 6.45 – 2.54 – – 7.62 – 3.0 – – 0° – 15° Plastic 20pin 300mil SDIP EIAJ Package Code SDIP20-P-300-1.78 Weight(g) 1.0 Lead Material Alloy 42/Cu Alloy 11 1 10 E 20 e1 c JEDEC Code – D A A2 Symbol L A1 SEATING PLANE e b b1 A A1 A2 b b1 c D E e e1 L Dimension in Millimeters Min Nom Max – – 4.5 0.51 – – – 3.3 – 0.38 0.48 0.58 0.9 1.0 1.3 0.22 0.27 0.34 18.8 19.0 19.2 6.15 6.3 6.45 – 1.778 – – 7.62 – 3.0 – – 0° – 15° Jun. 2009 7 MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY> M81049P/SP/FP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR 20P2N-A Plastic 20pin 300mil SOP EIAJ Package Code SOP20-P-300-1.27 JEDEC Code – Weight(g) 0.26 e b2 11 E Recommended Mount Pad Symbol 1 F 10 A D G b e A2 x A1 M y L L1 HE e1 I2 20 Lead Material Cu Alloy A A1 A2 b c D E e HE L L1 z Z1 x y c z Z1 Detail G Detail F b2 e1 I2 Dimension in Millimeters Min Nom Max 2.1 – – 0.2 0.1 0 – 1.8 – 0.5 0.4 0.35 0.25 0.2 0.18 12.7 12.6 12.5 5.4 5.3 5.2 – 1.27 – 8.1 7.8 7.5 0.8 0.6 0.4 – 1.25 – – 0.585 – – – 0.735 – – 0.25 0.1 – – 0° – 8° – 0.76 – – 7.62 – – 1.27 – Jun. 2009 8