MITSUBISHI RD06HVF1_11

< Silicon RF Power MOS FET (Discrete) >
RD06HVF1
RoHS Compliance, Silicon MOSFET Power Transistor 175MHz,6W
OUTLINE
DESCRIPTION
DRAWING
RD06HVF1 is a MOS FET type transistor specifically
1.3+/-0.4
3.2+/-0.4
9.1+/-0.7
High power gain:
12.3MIN
Pout>6W, Gp>13dB @Vdd=12.5V,f=175MHz
2
9+/-0.4
FEATURES
3.6+/-0.2
4.8MAX
12.3+/-0.6
designed for VHF RF power amplifiers applications.
1.2+/-0.4
0.8+0.10/-0.15
APPLICATION
1
2 3
For output stage of high power amplifiers in
0.5+0.10/-0.15
VHF band mobile radio sets.
3.1+/-0.6
5deg
9.5MAX
RoHS COMPLIANT
4.5+/-0.5
2.5 2.5
PINS
1:GATE
2:SOURCE
3:DRAIN
note:
Torelance of no designation means typical value.
Dimension in mm.
RD06HVF1-101 is a RoHS compliant products.
RoHS compliance is indicate by the letter “G” after the lot
marking.
This product include the lead in high melting temperature type solders.
However,it is applicable to the following exceptions of RoHS Directions.
1.Lead in high melting temperature type solders(i.e.tin-lead solder alloys containing more than85% lead.)
Publication Date : Oct.2011
1
< Silicon RF Power MOS FET (Discrete) >
RD06HVF1
RoHS Compliance,
Silicon MOSFET Power Transistor 175MHz,6W
ABSOLUTE MAXIMUM RATINGS
(Tc=25°C UNLESS OTHERWISE NOTED)
SYMBOL
PARAMETER
CONDITIONS
RATINGS
UNIT
VDSS
Drain to source voltage
Vgs=0V
50
V
VGSS
Gate to source voltage
Vds=0V
+/- 20
V
Pch
Channel dissipation
Tc=25°C
27.8
W
Pin
Input power
Zg=Zl=50
0.6
W
ID
Drain current
-
3
A
Tch
Channel temperature
-
150
°C
Tstg
Storage temperature
-
-40 to +150
°C
Rth j-c
Thermal resistance
4.5
°C/W
LIMITS
UNIT
junction to case
Note 1: Above parameters are guaranteed independently.
ELECTRICAL CHARACTERISTICS
(Tc=25°C, UNLESS OTHERWISE NOTED)
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX.
IDSS
Zero gate voltage drain current
VDS=17V, VGS=0V
-
-
10
uA
IGSS
Gate to source leak current
VGS=10V, VDS=0V
-
-
1
uA
VTH
Gate threshold Voltage
VDS=12V, IDS=1mA
1.9
-
4.9
V
Pout
Output power
VDD=12.5V, Pin=0.3W,
6
10
-
W
Drain efficiency
f=175MHz, Idq=0.3A
60
65
-
%
Load VSWR tolerance
VDD=15.2V,Po=6W(Pin Control)
D
f=175MHz,Idq=0.3A,Zg=50
Load VSWR=20:1(All Phase)
Note : Above parameters , ratings , limits and conditions are subject to change.
Publication Date : Oct.2011
2
No destroy
-
< Silicon RF Power MOS FET (Discrete) >
RD06HVF1
RoHS Compliance,
Silicon MOSFET Power Transistor 175MHz,6W
TYPICAL CHARACTERISTICS
Vgs-Ids CHARACTERISTICS
5
CHANNEL DISSIPATION
Pch(W)
50
CHANNNEL DISSIPATION VS.
AMBIENT TEMPERATURE
4
30
3
Ids(A)
40
20
Ta=+25°C
Vds=10V
2
1
10
0
0
0
40
80
120 160 200
AMBIENT TEMPERATURE Ta(°C)
0
4
2
Vgs=7V
1
Ciss(pF)
Ids(A)
Vgs=8V
40
30
20
Vgs=6V
10
Vgs=5V
0
0
8
0
10
10
20
30
Vds(V)
Vds VS. Coss CHARACTERISTICS
Vds VS. Crss CHARACTERISTICS
100
10
Ta=+25°C
f=1MHz
80
Ta=+25°C
f=1MHz
8
60
Crss(pF)
Coss(pF)
10
Ta=+25°C
f=1MHz
50
Vgs=9V
3
4
6
Vds(V)
8
60
Vgs=10V
Ta=+25°C
2
4
6
Vgs(V)
Vds VS. Ciss CHARACTERISTICS
Vds-Ids CHARACTERISTICS
0
2
40
6
4
2
20
0
0
0
10
20
0
30
Vds(V)
10
20
Vds(V)
Publication Date : Oct.2011
3
30
< Silicon RF Power MOS FET (Discrete) >
RD06HVF1
RoHS Compliance,
Silicon MOSFET Power Transistor 175MHz,6W
TYPICAL CHARACTERISTICS
Pin-Po CHARACTERISTICS
Pin-Po CHARACTERISTICS
Po
12
90
10
80
60
ηd
20
40
Gp
10
20
10
15
20
Pin(dBm)
25
6
Ta=25°C
f=175MHz
Vdd=12.5V
Idq=0.3A
4
Idd
0.0
30
Vdd-Po CHARACTERISTICS
3
Po
0.5
30
0.6
2
Idd(A)
8
Idd
6
4
+25°C
-25°C
10
Po(W)
0.4
Vds=10V
Tc=-25~+75°C
4
Ids(A),GM(S)
12
0.3
Pin(W)
5
4
Ta=25°C
f=175MHz
Pin=0.3W
Idq=0.3A
Zg=ZI=50 ohm
0.2
50
Vgs-Ids CHARACTORISTICS 2
16
14
0.1
60
40
0
0
5
70
ηd
2
Idd
0
8
1
3
+75°C
2
1
2
0
0
0
4
6
8
10
Vdd(V)
12
0
14
Vgs- gm CHARACTORISTICS
2.0
Vds=10V
Tc=-25~+75°C
gm(S)
1.5
-25°C
1.0
+25°C
0.5
+75°C
0.0
0
1
2
3
4 5
Vgs(V)
6
7
ηd(%)
80
30
0
100
Po
Pout(W) , Idd(A)
Po(dBm) , Gp(dB) , Idd(A)
40
14
100
Ta=+25°C
f=175MHz
Vdd=12.5V
Idq=0.3A
ηd(%)
50
8
9
Publication Date : Oct.2011
4
2
4
6
Vgs(V)
8
10
< Silicon RF Power MOS FET (Discrete) >
RD06HVF1
RoHS Compliance,
Silicon MOSFET Power Transistor 175MHz,6W
TEST CIRCUIT(f=175MHz)
Vgg
C1
Vdd
9.1kOHM
L6
C3
8.2kOHM
100OHM
C2
300pF
L1
L2
175MHz
RD06HVF1
L4
L3
L5
RF-IN
RF-OUT
82pF
300pF
10pF
7
5pF
5
30pF
70
25
30
87
33
52
92
55
100
72
75
92
100
Note:Board material PTFE substrate
micro strip line width=4.2mm/50OHM,er:2.7,t=1.6mm
C1:2200pF 10uF in parallel
C2:2200pF*2 in parallel
Dimensions:mm
C3:2200pF,330uF in parallel
L1-L3:6Turns,I.D1.6mm,D0.4mm enameled copper wire
L4:1Turns,I.D6mm,D1.6mm silver plateted copper wire
L5:4Turns,I.D6mm,D1.6mm P=1 silver plateted copper wire
L6:4Turns,I.D6mm,D1.6mm P=1 silver plateted copper wire
Publication Date : Oct.2011
5
< Silicon RF Power MOS FET (Discrete) >
RD06HVF1
RoHS Compliance,
Silicon MOSFET Power Transistor 175MHz,6W
INPUT/OUTPUT IMPEDANCE VS.FREQUENCY CHARACTERISTICS
f=175MHz Zout*
Zo=50ohm
f=135MHz Zo
f=175MHz Zin*
f=175MH Zo
Zin , Zout
f
Zin
Zout
(MHz)
(ohm)
(ohm)
Conditions
175
4.25-j25.6
5.64-j1.05
Po=10W, Vdd=12.5V,Pin=0.3W
Publication Date : Oct.2011
6
< Silicon RF Power MOS FET (Discrete) >
RD06HVF1
RoHS Compliance,
Silicon MOSFET Power Transistor 175MHz,6W
RD06HVF1 S-PARAMETER DATA (@Vdd=12.5V, Id=500mA)
Freq.
[MHz]
10
30
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
S11
(mag)
0.985
0.900
0.799
0.667
0.636
0.630
0.645
0.663
0.685
0.708
0.729
0.752
0.771
0.789
0.804
0.819
0.834
0.842
0.851
0.859
0.866
0.870
(ang)
-18.8
-50.4
-74.4
-109.6
-129.0
-140.1
-148.2
-155.0
-160.7
-165.9
-170.8
-175.4
179.9
175.4
171.2
166.9
162.6
158.5
154.3
150.3
146.2
142.3
S21
(mag)
(ang)
34.407
165.9
30.427
143.3
24.979
126.1
15.565
100.7
10.953
85.1
8.194
73.7
6.528
63.9
5.315
55.2
4.437
47.4
3.771
39.9
3.233
33.2
2.826
26.8
2.475
20.7
2.186
15.2
1.943
9.7
1.738
4.6
1.560
0.0
1.410
-4.5
1.275
-8.7
1.160
-12.6
1.058
-16.9
0.963
-20.0
Publication Date : Oct.2011
7
S12
(mag)
0.008
0.021
0.029
0.032
0.032
0.029
0.027
0.027
0.031
0.039
0.048
0.059
0.070
0.083
0.095
0.108
0.120
0.133
0.145
0.157
0.167
0.179
S22
(ang)
76.2
59.4
43.2
27.3
23.1
25.3
34.5
49.1
61.8
71.0
75.8
77.9
76.9
76.1
73.7
71.0
68.1
65.0
61.6
58.2
54.5
51.0
(mag)
0.826
0.767
0.677
0.547
0.523
0.528
0.561
0.588
0.622
0.657
0.686
0.715
0.743
0.763
0.789
0.804
0.820
0.837
0.847
0.858
0.869
0.876
(ang)
-17.3
-43.6
-65.0
-96.8
-113.4
-124.7
-132.7
-139.6
-145.9
-151.7
-157.0
-162.3
-167.6
-172.3
-177.3
178.1
173.5
169.0
164.8
160.2
155.7
151.8
< Silicon RF Power MOS FET (Discrete) >
RD06HVF1
RoHS Compliance,
Silicon MOSFET Power Transistor 175MHz,6W
ATTENTION:
1.High Temperature ; This product might have a heat generation while operation,Please take notice that have
a possibility to receive a burn to touch the operating product directly or touch the product until cold after switch
off. At the near the product,do not place the combustible material that have possibilities to arise the fire.
2.Generation of High Frequency Power ; This product generate a high frequency power. Please take notice
that do not leakage the unnecessary electric wave and use this products without cause damage for human and
property per normal operation.
3.Before use; Before use the product,Please design the equipment in consideration of the risk for human and
electric wave obstacle for equipment.
PRECAUTIONS FOR THE USE OF MITSUBISHI SILICON RF POWER DEVICES:
1. The specifications of mention are not guarantee values in this data sheet. Please confirm additional details
regarding operation of these products from the formal specification sheet. For copies of the formal
specification sheets, please contact one of our sales offices.
2.RA series products (RF power amplifier modules) and RD series products (RF power transistors) are designed
for consumer mobile communication terminals and were not specifically designed for use in other applications.
In particular, while these products are highly reliable for their designed purpose, they are not manufactured
under a quality assurance testing protocol that is sufficient to guarantee the level of reliability typically deemed
necessary for critical communications elements and In the application, which is base station applications and
fixed station applications that operate with long term continuous transmission and a higher on-off frequency
during transmitting, please consider the derating, the redundancy system, appropriate setting of the maintain
period and others as needed. For the reliability report which is described about predicted operating life time of
Mitsubishi Silicon RF Products , please contact Mitsubishi Electric Corporation or an authorized Mitsubishi
Semiconductor product distributor.
3. RD series products use MOSFET semiconductor technology. They are sensitive to ESD voltage therefore
appropriate ESD precautions are required.
4. In the case of use in below than recommended frequency, there is possibility to occur that the device is
deteriorated or destroyed due to the RF-swing exceed the breakdown voltage.
5. In order to maximize reliability of the equipment, it is better to keep the devices temperature low. It is
recommended to utilize a sufficient sized heat-sink in conjunction with other cooling methods as needed (fan,
etc.) to keep the channel temperature for RD series products lower than 120deg/C(in case of
Tchmax=150deg/C) ,140deg/C(in case of Tchmax=175deg/C) under standard conditions.
6. Do not use the device at the exceeded the maximum rating condition. In case of plastic molded devices, the
exceeded maximum rating condition may cause blowout, smoldering or catch fire of the molding resin due to
extreme short current flow between the drain and the source of the device. These results causes in fire or
injury.
7. For specific precautions regarding assembly of these products into the equipment, please refer to the
supplementary items in the specification sheet.
8. Warranty for the product is void if the products protective cap (lid) is removed or if the product is modified in
any way from it’s original form.
9. For additional “Safety first” in your circuit design and notes regarding the materials, please refer the last page
of this data sheet.
10. Please refer to the additional precautions in the formal specification sheet.
Publication Date : Oct.2011
8
< Silicon RF Power MOS FET (Discrete) >
RD06HVF1
RoHS Compliance,
Silicon MOSFET Power Transistor 175MHz,6W
Keep safety first in your circuit designs!
Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead
to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit
designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of
non-flammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
•These materials are intended as a reference to assist our customers in the selection of the Mitsubishi
semiconductor product best suited to the customer’s application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party.
•Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party’s
rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.
•All information contained in these materials, including product data, diagrams, charts, programs and algorithms
represents information on products at the time of publication of these materials, and are subject to change by
Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore
recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor
product distributor for the latest product information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric
Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or
errors.
Please also pay attention to information published by Mitsubishi Electric Corporation by various means, including
the Mitsubishi Semiconductor home page (http://www.MitsubishiElectric.com/).
•When using any or all of the information contained in these materials, including product data, diagrams, charts,
programs, and algorithms, please be sure to evaluate all information as a total system before making a final
decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes no
responsibility for any damage, liability or other loss resulting from the information contained herein.
•Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system
that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric
Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product
contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical,
aerospace, nuclear, or undersea repeater use.
•The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part
these materials.
•If these products or technologies are subject to the Japanese export control restrictions, they must be exported
under a license from the Japanese government and cannot be imported into a country other than the approved
destination.
Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of
destination is prohibited.
•Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for
further details on these materials or the products contained therein.
© 2011 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
Publication Date : Oct.2011
9