ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type (02 type) series (Through 100V only) Axial lead type of standard series for general purposes. Compliant to the RoHS directive (2002/95/EC). Specifications Item Performance Characteristics Category Temperature Range – 40 to +85°C (6.3 to 250V), – 25 to +85°C (315 to 450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Rated voltage (V) 6.3 to 100 160 to 450 In case of CV 1000 After 1 minute's application of rated voltage, not more than 0.1CV+40 (µA) . In case of CV > 1000 After 1 minute's application of rated voltage, not more than 0.04CV+100 (µA) . After 1 minute's application of rated voltage, not more than 0.03CV or 4 (µA) , whichever is greater. Leakage Current Leakage current After 2 minutes' application of rated voltage, not more than 0.01CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C Rated voltage (V) Tangent of loss angle (tan δ) 6.3 0.24 tan δ (MAX.) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 to 100 160 to 315 350 to 450 0.08 0.20 0.25 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz Rated voltage (V) Z–25°C / Z+20°C Impedance rat io ZT / Z20 (MAX.) Z–40°C / Z+20°C Stability at Low Temperature 6.3 4 10 10 3 8 16 2 6 25 2 4 35 to 100 160 to 250 315 · 350 400 · 450 2 4 6 15 3 12 — — Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements at right. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Marking Printed with white color letter on purple blue sleeve. Type numbering system (Example : 10V 330µF) Axial Lead Type 1 Pressure relief vent Sleeve (P.E.T.) Sealing rubber packing (φ10up) 2 3 4 5 6 7 8 9 10 11 T V X 1 A 3 3 1 MAD φd +0.5MAX Configuration Capacitance tolerance (± 20%) φD Rated capacitance (330µF) Rated voltage (10V) L+ 35 MIN MAX 35 MIN Series name Type Configuration (mm) α (φD < 10) 1 (φD 10) 2 φD 5 to 13 φd 0.6 16 to 18 0.8 φD Pb-free leadwire Pb-free PET sleeve 5 to 8 AD 10 to 18 CD Please refer to page 22 about the taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100B ALUMINUM ELECTROLYTIC CAPACITORS VX (02 type) series Dimensions V Cap.(µF) 6.3 0J Code 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 682 103 5 × 12 6.3 × 16 6.3 × 16 8 × 16 10 × 21 13 × 26 13 × 26 16 × 31.5 16 × 31.5 16 × 41.5 V Cap.(µF) Code 1 2.2 3.3 4.7 10 22 33 47 100 010 2R2 3R3 4R7 100 220 330 470 101 10 1A 110 200 250 330 600 1020 1200 1500 1840 2260 6.3 × 12 6.3 × 16 8 × 16 8 × 16 10 × 21 13 × 26 13 × 31.5 16 × 31.5 16 × 41.5 18 × 41 160 2C 6.3 × 12 6.3 × 16 8 × 16 8 × 16 8 × 20 10 × 26 13 × 26 13 × 31.5 16 × 41.5 13 23 33 39 60 120 170 230 430 16 1C 25 1E 5 × 12 6.3 × 16 8 × 16 8 × 16 8 × 20 10 × 26 13 × 31.5 16 × 31.5 16 × 41.5 18 × 41 130 210 300 350 640 1090 1390 1730 1930 2350 200 2D 6.3 × 12 6.3 × 16 8 × 16 8 × 16 10 × 21 13 × 26 13 × 26 13 × 31.5 16 × 41.5 13 23 33 39 70 140 170 230 430 85 160 260 320 430 770 1180 1620 1840 2310 35 1V 5 × 12 80 6.3 × 12 100 6.3 × 16 170 8 × 16 280 8 × 20 380 10 × 26 510 13 × 26 900 16 × 31.5 1480 16 × 41.5 1710 18 × 41 2170 250 2E 6.3 × 16 8 × 16 8 × 16 8 × 20 10 × 21 13 × 26 13 × 31.5 16 × 31.5 16 × 41.5 14 27 33 45 70 140 190 260 430 5 × 12 70 6.3 × 12 90 6.3 × 16 120 8 × 16 210 8 × 20 340 10 × 21 460 10 × 26 610 13 × 31.5 1060 16 × 31.5 1580 16 × 41.5 2050 315 2F 6.3 × 16 8 × 16 8 × 20 8 × 20 10 × 26 13 × 31.5 16 × 31.5 16 × 31.5 14 27 36 45 80 150 210 260 50 1H 5 × 12 5 5 × 12 10 5 × 12 23 5 × 12 28 5 × 12 34 5 × 12 50 6.3 × 12 85 6.3 × 16 110 6.3 × 16 130 8 × 16 220 10 × 21 410 10 × 26 560 13 × 26 730 16 × 31.5 1260 18 × 41 1920 350 2V 6.3 × 16 8 × 16 8 × 20 10 × 21 13 × 26 13 × 31.5 16 × 31.5 16 × 41.5 12 24 32 46 85 140 190 260 63 1J 5 × 12 55 6.3 × 12 90 6.3 × 16 120 8 × 16 160 8 × 20 260 10 × 26 480 13 × 26 650 13 × 31.5 840 16 × 31.5 1330 400 2G 8 × 16 8 × 20 10 × 21 10 × 21 13 × 26 16 × 31.5 16 × 41.5 18 × 41 14 28 38 46 85 150 210 290 100 2A 5 × 12 5 × 12 5 × 12 5 × 12 5 × 12 6.3 × 12 8 × 16 8 × 16 8 × 20 10 × 26 13 × 26 13 × 31.5 16 × 31.5 450 2W 8 × 16 10 × 21 10 × 21 10 × 26 13 × 26 16 × 31.5 18 × 41 10 18 28 34 40 60 120 150 190 340 560 750 970 14 31 38 50 85 150 230 Case size Rated φ D × L (mm) ripple Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current V Frequency Cap.(µF) 0.47 to 47 6.3 to 100 100 to 470 1000 to 10000 160 to 450 1 to 100 120 Hz 300 Hz 1kHz 10kHz or more 1.00 1.35 1.57 2.00 1.00 1.23 1.34 1.50 1.00 1.10 1.13 1.15 1.00 1.25 1.40 1.60 CAT.8100B