ALUMINUM ELECTROLYTIC CAPACITORS BC Chip Type , High Temperature Range, Vibration Resistance series Highly dependable reliability withstanding load life of 1000 hours at +150°C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2002/95/EC). BC High Temperature UE Specifications Item Performance Characteristics Category Temperature Range – 40 to +150°C ( φ 8 to 10), – 55 to +150°C ( φ 12.5 to 18) Rated Voltage Range 10 to 50V Rated Capacitance Range 33 to 3300µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) φ8 tan δ Tangent of loss angle (tan δ) • φ 10 φ 12.5 to φ 18 (MAX.) 10 16 25 35 50 0.26 0.20 0.16 0.14 0.14 0.22 0.18 0.16 0.14 0.12 120Hz 20°C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) φ8 Stability at Low Temperature Impedance ratio Z– 40°C / Z+20°C • φ 10 10 16 25 35 50 10 8 6 4 4 8 6 4 4 φ 12.5 to φ 18 (MAX.) 4 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 150°C. Endurance 120Hz Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Shelf Life After storing the capacitors under no load at 150°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Chip Type Type numbering system (Example : 10V 220µF) (φ8 to φ10) B±0.2 φ D±0.5 3 4 5 6 7 8 9 Package code Capacitance Tolerance (±20%) Rated capacitance (220µF) NS (mm) φD A ± 0.2 B ± 0.2 A ± 0.2 nichicon 100 µF BC 50V H1015 φD ± 0.5 L±1.0 Series Capacitance C± 0.2 0.3MAX. Lot N0. Code Series name Type 0.5MAX. Plastic platform E Trade mark φD 8 to 18 Rated voltage (10V) (φ12.5 to φ18) Voltage GS MS ZD Size code H Pressure relief vent Taping Taping Tray Configuration L±1.0 Capacitance 10 11 12 13 14 φ8 to 10 φ12.5 to 18 φ12.5 to 18 A±0.2 A2 220A BC C±0.2 2 A±0.2 0.3 MAX. Series Trade mark 1 UBC 1 A 2 2 1 M NS 1 GS E Lot N0. 0.5 MAX. Plastic platform Voltage( A : 10V ) 8 10 12.5 16 18 A 2.9 3.2 4.8 5.4 6.4 B 8.3 10.3 13.6 17.1 19.1 C 8.3 10.3 13.6 17.1 19.1 E 3.1 4.5 4.0 6.3 6.3 H 1.1 to 1.5 1.1 to 1.5 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 H Pressure relief vent Aid electrode Dimensions 10 1A V Cap.(µF) 33 47 100 220 330 470 680 1000 2200 3300 Code 330 470 101 221 331 471 681 102 222 332 16 1C 8 × 10 110 10 × 10 150 25 1E 35 1V 50 1H 8 × 10 70 8 × 10 80 10 × 10 100 8 × 10 110 8 × 10 110 10 × 10 120 12.5 × 13.5 420 10 × 10 150 10 × 10 150 12.5 × 13.5 550 16 × 16.5 550 12.5 × 13.5 650 12.5 × 13.5 650 16 × 21.5 650 12.5 × 13.5 750 12.5 × 13.5 700 16 × 16.5 750 16 × 21.5 850 800 12.5 × 13.5 800 16 × 16.5 800 16 × 21.5 950 18 × 21.5 1100 12.5 × 13.5 900 16 × 16.5 850 16 × 21.5 1000 18 × 21.5 1150 18 × 21.5 18 × 21.5 1350 1400 18 × 21.5 1350 Case size φ D × L (mm) Rated ripple 12.5 × 13.5 Rated ripple current (mArms) at 150°C 100kHz Frequency coefficient of rated ripple current Frequency Coefficient 120 Hz 0.67 300 Hz 0.79 1 kHz 0.91 10kHz or more 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100B