ALUMINUM ELECTROLYTIC CAPACITORS HV High Ripple Low Impedance Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C series Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2011/65/EU). HD Smaller HW HV Long Life Specifications Performance Characteristics ltem Category Temperature Range – 40 to +105˚C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 47 to 8200µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 tan δ (MAX.) 0.21 0.18 0.15 0.13 0.11 Tangent of loss angle (tan δ) 120Hz 20˚C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) 6.3 10 16 25 35 Z–25˚C / Z+20˚C 2 2 2 2 2 Z–40˚C / Z+20˚C 3 3 3 3 3 The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 6000 hours (5000 hours for φD=5 and 6.3) at 105˚C, the peak voltage shall not exceed the rated voltage. Endurance 120Hz Capacitance change Within ± 25% of the initial capacitance value (6.3V 10V : ± 30%) tan δ 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value Printed with white color letter on black sleeve. Marking Type numbering system (Example : 25V 150µF) Radial Lead Type φd Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 φD+0.5 MAX. U HV 1 E 1 5 1 M E D P ± 0.5 Size code Configuration Capacitance tolerance (± 20%) Rated capacitance (150µF) Pressure relief vent (φ6.3up) L+ MAX. 15MIN Rated voltage (25V) 4MIN Series name Type (mm) (L < 20) 1.5 (L 20) 2.0 φD 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm. • Please refer to page 20 about the end seal configuration. Configuration φD Pb-free leadwire Pb-free PET sleeve 5 DD 6.3 8 · 10 12.5 · 16 ED PD HD Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100C ALUMINUM ELECTROLYTIC CAPACITORS HV series Standard Ratings V (Code) Item Cap.(µF) Code 6.3 (0J) Case size φD × L (mm) 10 (1A) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz Case size φD × L (mm) 16 (1C) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz Case size φD × L (mm) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz 5 × 11 0.23 0.76 360 5 × 11 0.23 0.76 360 6.3 × 11 0.10 0.33 450 360 6.3 × 11 0.10 0.33 450 6.3 × 11 0.10 0.33 550 0.33 460 6.3 × 11 0.10 0.33 550 8 × 11.5 0.059 0.181 830 0.33 550 0.059 0.181 820 8 × 11.5 0.059 0.181 990 10 × 12.5 0.043 0.133 1360 100 101 150 151 220 221 5 × 11 0.23 0.76 330 331 6.3 × 11 0.10 470 471 6.3 × 11 0.10 8 × 11.5 680 681 8 × 11.5 0.059 0.181 900 8 × 11.5 0.059 0.181 990 8 × 15 0.046 0.143 1330 820 821 8 × 11.5 0.059 0.181 990 10 × 12.5 0.043 0.133 1250 10 × 16 0.030 0.095 1650 10 × 12.5 0.043 0.133 1360 10 × 16 0.030 0.095 1815 8 × 15 0.046 0.143 1330 8 × 20 0.031 0.105 1550 10 × 16 0.030 0.095 1650 10 × 20 0.019 0.057 1930 10 × 16 0.030 0.095 1815 8 × 20 0.031 0.105 1550 10 × 20 0.019 0.057 2160 1000 102 10 × 12.5 0.043 0.133 1250 10 × 12.5 0.043 0.133 1360 8 × 15 0.046 0.143 1330 1200 122 1500 152 8 × 20 0.031 0.105 1550 1800 182 10 × 16 0.030 0.095 1815 10 × 20 0.019 0.057 2160 10 × 25 0.017 0.051 2475 2200 222 10 × 20 0.019 0.057 2160 10 × 25 0.017 0.051 2475 12.5 × 20 0.016 0.041 2725 2700 272 10 × 25 0.017 0.051 2475 12.5 × 20 0.016 0.041 2475 12.5 × 25 0.014 0.036 3190 12.5 × 31.5 0.012 0.031 3795 16 × 20 0.014 0.036 3575 3300 332 12.5 × 20 0.016 0.041 2500 12.5 × 20 0.016 0.041 2725 3900 392 12.5 × 20 0.016 0.041 2725 12.5 × 25 0.014 0.036 3190 12.5 × 35.5 0.011 0.029 3925 12.5 × 31.5 0.012 0.031 3795 16 × 20 0.014 0.036 3575 16 × 25 0.012 0.033 3990 4700 472 12.5 × 25 0.014 0.036 3190 5600 562 12.5 × 31.5 0.012 0.031 3795 12.5 × 35.5 0.011 0.029 3925 12.5 × 35.5 0.011 0.029 3925 16 × 20 0.014 0.036 3575 16 × 25 0.012 0.033 3990 16 × 25 0.012 0.033 3990 6800 8200 682 822 V (Code) Item Cap.(µF) Code 25 (1E) Case size φD × L (mm) 35 (1V) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz Case size φD × L (mm) Impedance (Ω) MAX. Rated ripple (mArms) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz 5 × 11 0.23 0.76 360 360 6.3 × 11 0.10 0.33 450 0.33 450 6.3 × 11 0.10 0.33 550 0.10 0.33 550 8 × 11.5 0.059 0.181 820 8 × 11.5 0.059 0.181 810 8 × 11.5 0.059 0.181 990 271 8 × 11.5 0.059 0.181 900 8 × 15 0.046 0.143 1330 330 331 8 × 11.5 0.059 0.181 990 10 × 12.5 0.043 0.133 1360 390 391 8 × 15 0.046 0.143 1330 8 × 20 0.031 0.105 1550 470 471 10 × 12.5 0.043 0.133 1360 10 × 16 0.030 0.095 1815 560 561 8 × 20 0.031 0.105 1550 10 × 20 0.019 0.057 2160 680 681 10 × 16 0.030 0.095 1815 10 × 25 0.017 0.051 2475 820 821 10 × 20 0.019 0.057 2160 12.5 × 20 0.016 0.041 2725 1000 102 10 × 25 0.017 0.051 2475 12.5 × 20 0.016 0.041 2920 1200 122 12.5 × 20 0.016 0.041 2475 12.5 × 25 0.014 0.036 3190 12.5 × 31.5 0.012 0.031 3795 16 × 20 0.014 0.036 3575 47 470 68 680 5 × 11 0.23 0.76 100 101 6.3 × 11 0.10 150 151 6.3 × 11 220 221 270 1500 152 12.5 × 20 0.016 0.041 2725 1800 182 12.5 × 25 0.014 0.036 3190 12.5 × 35.5 0.011 0.029 3925 12.5 × 31.5 0.012 0.031 3795 16 × 20 0.014 0.036 3575 16 × 25 0.012 0.033 3990 2200 222 2700 272 12.5 × 35.5 0.011 0.029 3925 3300 332 16 × 25 0.012 0.033 3990 : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Cap. (µF) Frequency 47 to 150 220 to 560 680 to 1800 2200 to 3900 4700 to 8200 120Hz 1kHz 10kHz 100kHz or more 0.40 0.50 0.60 0.75 0.85 0.75 0.85 0.87 0.90 0.95 0.90 0.94 0.95 0.95 0.98 1.00 1.00 1.00 1.00 1.00 CAT.8100C