Features ● ● ● ● ● ● ● ● ● LED Driver LIGHTLINE 3W Class II AC-DC LED Power Supply 350mA to 700mA CC/CV Output ENEC, UL, RCM and CB Certified Universal Input Voltage Range Fused Input and Protected Output 3kVAC Isolation IP66 Low Cost 3 Year Warranty AC/DC-Converter with 3 year Warranty Description A compact universal AC input 3W constant current switching power module suitable for driving 1 - 6 high power LEDs. The output (dual constant voltage / constant current mode) current limit is fixed at 350mA, 500mA or 700mA. At lower output currents, the output is constant voltage. Connections are via 118mm long flying leads. Selection Guide Part Number (VDC) CV Mode (mA) (VDC) CC Mode (mA) Efficiency typ. (%) RACD03-350 15 0-350 2.5-15 350 72 RACD03-500 11 0-500 2.5-11 500 71 RACD03-700 6 0-700 2.5-6 700 62 3 Watt Single Output Specifications (typical at 25°C and after warm up time unless otherwise specified ) Input Voltage Range 90-264VAC or 120-370VDC Rated Power 3W nom. / 5W max. Input Frequency Range 47-63 Hz Output Voltage Range 2.5 - 15VDC max. Inrush Current (<2mS) 230VAC 10A max. Leakage Current 240VAC/50Hz Input Fuse Built-in Input Current 350mA Verison 20mA 500mA Version 25mA 0.2mA typ. T1A 700mA Version Output Current Accuracy Open Circuit Protected 1 LED 0.1Ap-p max. Hold Up Time 18ms min. Operating Frequency 66kHz typ. Temperature Coefficient 3.75kV / 1 minute typ., 3kV / 1 minute min. ±0.02%/°C typ. Overload Protection Short Circuit Protection 120% typ. Continuous Current Limit Output Overvoltage Protection Zener Diode Clamp Overtemperature Protection Operating Temperature Range (free air convection) Shutdown, Automatic restart after cooling down Ambient Temperature -20°C to +50°C Case Temperature 85°C max. Storage Temperature Range Humidity RACD03 ±10% Output Ripple AC RMS Isolation Voltage (input to output) E340696 UL-8750 Certified EN-61347 Certified ENEC Certified 38mA (combined Tolerance, Load Regulation and Line Regulation) Minimum Load RoHS 2011/65/EU 6/6 -25°C to +85°C 95% RH max. IP Rating IP66 continued on next page Please Read Application Notes www.recom-international.com REV: 2/2013 L-19 RACD03 Series LIGHTLINE AC/DC-Converter Specifications cont. (typical at 25°C and after warm up time unless otherwise specified ) PCB Material Plastic Resin with Fibreglass (UL94V-0) Case Material Plastic Weight 45g Packing Quantity Designed to meet Standards Electrical Lighting, EMC Emissions Limits for Harmonics Emissions EMC Compatibilty: Flicker and Voltage Variations Electrical Lighting: EMC Immunity Class II Power Supply Safety FCC LED Lighting Safety (E340696) RCM (U21376) ENEC General Safety ENEC Safety of AC supplied Control Gear for LED Modules Certifications Design Lifetime Connections 25°C ambient AC Input Live AC Input Neutral LED + LED - 10pc EN55015:2006 + A1: 2007 + A2:2009 EN 61000-3-2:2006 EN 61000-3-3:2006 EN 61547:1995 + A1:2000 UL1310 FCC18A UL8750 AS/NZS 61347.1:2002, IEC 61347-2-13 EN 61347-1: 2008 EN 61347-2-13: 2006 >20 x 10³ hours in operation Brown Wire, AWG18, 172mm + 5-7mm stripped and tinned Blue Wire, AWG18, 172mm + 5-7mm stripped and tinned Red Wire, AWG18, 128mm + 5-7mm stripped and tinned* Black Wire, AWG18, 128mm + 5-7mm stripped and tinned* * Do not connect or disconnect the LED load while the converter is on. This may damage the LED or reduce its life. Characteristics Constant Current (CC) and Constant Voltage (CV) Graph CC Output Voltage RACD03-500 CV 11V CC RACD03 RACD03-350 CV 15V RACD03-700 CV 6V CC 700mA 500mA Output Current 350mA 3V Nominal Current Limits Package Style and Pinning 3rd angle projection 1.3+0.1 - Wire Connections TC 29.6 4.0 5.0 38.1 46.1 52.1 L-20 23.1 Wire Function Brown VAC in (L) Blue VAC in (N) Red LED+ Black LED- 2 Mounting screws are included Tolerance Tc = Case Temperature Measuring Point XX = +1mm/ -0.5mm XX.X = +/- 0.25mm REV: 2/2013 www.recom-electronic.com