SANYO SMA3102

SMA3102
Ordering number : ENA1825
SANYO Semiconductors
DATA SHEET
SMA3102
Silicon MMIC
Low Noise Amplifier
Features
•
•
•
•
•
High Gain
: Gp=24.5dB typ. @1.575GHz
Low Noise
: NF=1.5dB typ. @1.575GHz
Low Voltage
: VCC=2.0V typ.
Low Current
: ICC=10mA typ.
Halogen free compliance
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Unit
Supply Voltage
VCC
3.5
V
Circuit Current
ICC
40
mA
Allowable Power Dissipation
PD
280
mW
Operating Temperature
Topr
--40 to +85
°C
Storage Temperature
Tstg
--55 to +150
°C
Product & Package Information
unit : mm (typ)
7022A-018
• Package
: MCPH6
• JEITA, JEDEC
: SC82, SC82A, SC88
• Minimum Packing Quantity : 3,000pcs/reel
2.0
6
5
0.15
Type of Taping: TL
4
3
LB
TL
0.3
0.85
0.25
2
0.65
LOT No.
1
LOT No.
0.07
Marking
0 t o 0.02
2.1
1.6
0.25
Package Dimensions
1
2
3
1 : VCC
2 : GND
3 : OUT
4 : GND
5 : GND
6 : IN
6
5
4
SANYO : MCPH6
http://semicon.sanyo.com/en/network
90810AM TK IM TC-00002467 No. A1825-1/5
SMA3102
Recommended Operating Conditions at Ta=25°C
Parameter
Symbol
Supply Voltage
Ratings
Conditions
min
VCC
Topr
Operating Ambient Temperature
typ
Unit
max
1.8
2
2.3
V
--40
+25
+85
°C
Electrical Characteristics at Ta=25°C, VCC=2.0V
Parameter
Symbol
Circuit Current
Ratings
Conditions
ICC
Gp
min
typ
Unit
max
7.0
10.0
14.0
mA
f=1.575GHz
21.5
24.5
27.5
dB
f=1.575GHz
33.0
38.0
dB
Input Return Loss
ISL
RLin
f=1.575GHz
8.0
10.0
dB
Output Return Loss
RLout
f=1.575GHz
12.0
16.0
Noise Figure
NF
f=1.575GHz
Gain 1dB Compression Input Power
Pin(1dB)
f=1.575GHz
Input 3rd Order Intercept Point
IIP3
f1=1.574GHz, f2=1.575GHz
Power Gain
Isolation
1.5
--25.0
dB
1.7
dB
--22.0
dBm
--10.0
dBm
Note) Pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopted.
Test Circuit
12pF
IN
10nH
6
5
4
1
2
3
6pF
OUT
1000pF
8.2nH
VCC
Connect 2, 4 and 5 with GND.
IT15925
No. A1825-2/5
SMA3102
Design of the Evaluation Board
VCC
C3
IN
C1
L1
L2
C2
OUT
Symbol
Value
C1
Circuit Current, ICC -- mA
C3
1000pF
L1
10nH
L2
8.2nH
ICC -- VCC
25
20
15
10
5
0
1
0
2
3
Circuit Voltage, VCC -- V
IT15926
Gp -- f
40
Input Return Loss, RLin -- dB
30
25
20
15
10
5
0.5
1.0
1.5
Frequency, f -- GHz
RLin -- f
0
35
Power Gain , Gp -- dB
C2
12pF
6pF
2.0
2.5
IT15927
--5
--10
--15
--20
--25
--30
0.5
1.0
1.5
Frequency, f -- GHz
2.0
2.5
IT15928
No. A1825-3/5
SMA3102
ISL -- f
Isolation, ISL -- dB
--20
--30
--40
--50
--60
--70
0.5
1.0
1.5
2.0
Frequency, f -- GHz
--15
--20
--25
1.0
1.5
2.0
2.5
Frequency, f -- GHz
10
IT15930
Pout -- Pin
f=1.575GHz
5
Output Level, Pout -- dBm
Noise Figure, NF -- dB
--10
--30
0.5
2.5
3.0
2.5
2.0
1.5
0
--5
--10
--15
1.0
0.5
0.5
--5
IT15929
NF -- f
3.5
RLout -- f
0
Output Return Loss, RLout -- dB
--10
1.0
1.5
Frequency, f -- GHz
2.0
2.5
IT15931
--20
--50
--40
--30
--20
Input Level, Pin -- dBm
--10
0
IT15932
No. A1825-4/5
SMA3102
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not
be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for applications outside the standard
applications of our customer who is considering such use and/or outside the scope of our intended standard
applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the
intended use, our customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer' s
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of September, 2010. Specifications and information herein are subject
to change without notice.
PS No. A1825-5/5