STMICROELECTRONICS STGWT38IH130D

STGW38IH130D,
STGWT38IH130D
33 A - 1300 V - very fast IGBT
Datasheet − production data
Features
■
Low saturation voltage
■
High current capability
■
Low switching loss
■
Low static and peak forward voltage drop freewheeling diode
2
3
3
2
1
1
Applications
■
Induction cooking, microwave ovens
■
Soft-switching applications
TO-247
TO-3P
Description
This device is a very fast IGBT developed using
advanced PowerMESH™ technology. This
process guarantees an excellent trade-off
between switching performance and low on-state
behavior. This device is well-suited for resonant or
soft-switching applications.
Table 1.
Figure 1.
Internal schematic diagram
Device summary
Order codes
Marking
STGW38IH130D
STGWS38IH130D
Package
Packaging
TO-247 long leads
GW38IH130D
STGWT38IH130D
September 2012
This is information on a product in full production.
TO-247
Tube
TO-3P
Doc ID 15697 Rev 4
1/17
www.st.com
17
Contents
STGW38IH130D, STGWT38IH130D
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
............................. 6
3
Test circuits
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
............................................... 9
Doc ID 15697 Rev 4
STGW38IH130D, STGWT38IH130D
1
Electrical ratings
Electrical ratings
Table 2.
Absolute maximum ratings
Value
Symbol
VCES
TO-3P, TO-247
long leads
Collector-emitter voltage (VGE = 0)
Unit
TO-247
1300
V
IC
(1)
Continuous collector current at TC = 25 °C
63
55
A
IC
(1)
Continuous collector current at TC = 100 °C
33
25
A
ICL (2)
Turn-off latching current
40
A
(3)
Pulsed collector current
125
A
VGE
Gate-emitter voltage
±25
V
PTOT
Total dissipation at TC = 25 °C
ICP
IF
IFSM
Tj
1.
Parameter
250
180
W
Diode RMS forward current at TC = 25 °C
30
A
Surge non repetitive forward current
tp = 10 ms sinusoidal
100
A
–55 to 150
°C
Operating junction temperature
Calculated according to the iterative formula:
Tj ( max ) – TC
IC ( T C ) = ------------------------------------------------------------------------------------------------------Rthj – c × V CE ( sat ) ( max ) ( T j ( max ), I C ( T C ) )
2. Vclamp = 960 V, Tj =150 °C, RG=10 Ω, VGE=15 V
3. Pulse width limited by maximum permissible junction temperature and turn-off within RBSOA
Table 3.
Thermal data
Value
Symbol
Parameter
Unit
TO-3P, TO-247
long leads
TO-247
Rthj-case
Thermal resistance junction-case IGBT
0.5
0.7
°C/W
Rthj-case
Thermal resistance junction-case diode
2
2.1
°C/W
Rthj-amb
Thermal resistance junction-ambient
Doc ID 15697 Rev 4
50
°C/W
3/17
Electrical characteristics
2
STGW38IH130D, STGWT38IH130D
Electrical characteristics
TJ= 25 °C unless otherwise specified.
Table 4.
Symbol
Static
Parameter
Test conditions
Collector-emitter
V(BR)CES breakdown voltage
(VGE = 0)
IC = 1 mA
VCE(sat)
Collector-emitter saturation VGE= 15 V, IC= 20 A
voltage
VGE= 15 V, IC= 20 A, TJ =125 °C
VGE(th)
Gate threshold voltage
VCE= VGE, IC= 1 mA
ICES
Collector-cut-off current
(VGE = 0)
IGES
gfs (1)
VF
Min.
Typ. Max. Unit
1300
V
2.1
2.0
2.8
V
V
5.75
V
VCE =1300 V
VCE =1300 V, TJ=125 °C
1
10
mA
mA
Gate-emitter leakage
current (VCE = 0)
VGE =± 20 V
±
100
nA
Forward transconductance
VCE = 25 V, IC= 20 A
20
Diode forward voltage
IF = 20 A
IF = 20 A, TJ = 125 °C
1.3
1.9
1.7
3.75
S
V
V
1. Pulsed: pulse duration = 300 µs, duty cycle 1.5%
Table 5.
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Cies
Coes
Cres
Input capacitance
Output capacitance
Reverse transfer
capacitance
VCE = 25 V, f = 1 MHz, VGE=0
-
2900
155
30
-
pF
pF
pF
Qg
Qge
Qgc
Total gate charge
Gate-emitter charge
Gate-collector charge
VCE = 960 V,
IC= 20 A,VGE=15 V
-
127
18
50
-
nC
nC
nC
Min.
Typ.
Max.
Unit
Table 6.
Symbol
4/17
Dynamic
Inductive load switching times
Parameter
Test conditions
tr(Voff)
td(off)
tf
Off voltage rise time
Turn-off delay time
Current fall time
VCC = 960 V, IC = 20 A
RG= 10 Ω, VGE= 15 V,
(see Figure 16)
-
102
284
180
-
ns
ns
ns
tr(Voff)
td(off)
tf
Off voltage rise time
Turn-off delay time
Current fall time
VCC = 960 V, IC = 20 A
RG= 10 Ω, VGE= 15 V,
TJ= 125 °C (see Figure 16)
-
200
424
316
-
ns
ns
ns
Doc ID 15697 Rev 4
STGW38IH130D, STGWT38IH130D
Table 7.
Symbol
Electrical characteristics
Switching energy (inductive load)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Eoff (1)
Turn-off switching losses
VCC = 960 V, IC = 20 A
RG= 10 Ω, VGE= 15 V,
(see Figure 16)
-
3.4
-
mJ
Eoff (1)
Turn-off switching losses
VCC = 960 V, IC = 20 A
RG= 10 Ω, VGE= 15 V,
TJ= 125 °C (see Figure 16)
-
6.4
-
mJ
1. Turn-off losses include also the tail of the collector current
Doc ID 15697 Rev 4
5/17
Electrical characteristics
STGW38IH130D, STGWT38IH130D
2.1
Electrical characteristics (curves)
Figure 2.
Output characteristics
Figure 3.
HV42580
IC(A)
Transfer characteristics
HV42585
IC(A)
14 V
VGE=15 V
VCE=15V
13 V
300
250
12 V
250
200
11 V
200
10 V
150
150
9V
100
100
8V
50
50
7V
0
0
5
Figure 4.
15
10
VCE(V)
Transconductance
Figure 5.
HV42590
Gfs(S)
TC=-50°C
26
0
5
10
15
VGE(V)
Collector-emitter on voltage vs.
temperature
HV42600
VCE(sat)
(V)
24
2.5
25°C
22
IC=40A
2.375
20
125°C
18
2.25
16
2.125
14
12
2.0
10
1.875
8
IC=20A
1.75
6
IC=10A
1.625
4
1.5
-75 -50
2
5
0
Figure 6.
15
10
20
IC(A)
Normalized breakdown voltage vs.
temperature
Figure 7.
-25
0
25
50
75
100 125 150 TJ(°C)
Gate-charge vs. gate-emitter
HV42640
(norm)
HV42630
VGE(V)
BVCES
IC=1mA
16
1.1
VCE=960V
IC=20A
14
1.075
12
1.05
10
1.025
8
1
6
0.975
4
0.95
2
0.925
0.9
-75
6/17
0
-50
-25
0
25
50
75
100 125 150 TJ(°C)
0
Doc ID 15697 Rev 4
50
100
150
Qg(nC)
STGW38IH130D, STGWT38IH130D
Figure 8.
Electrical characteristics
Normalized gate threshold voltage
vs. temperature
HV42610
VGE(th)
(norm)
Figure 9.
Collector-emitter on voltage vs.
collector current
HV42650
VCE(sat)
(V)
TC=25°C
2.45
IC=250µA
1.1
2.25
TC=-50°C
1.05
2.05
1.0
1.85
0.95
1.65
0.9
1.45
0.85
TC=125°C
1.25
0.8
0.75
1.05
0.7
-75
0.85
-50
-25
0
25
50
75
100 125 150 TJ(°C)
0
10
20
30
40
Figure 10. Switching losses vs. temperature
Figure 11. Switching losses vs. gate
resistance
Figure 12. Switching losses vs. collector
current
Figure 13. RBSOA
IC(A)
AM03937v1
IC
(A)
100
10
1
0.1
1
Doc ID 15697 Rev 4
10
100
1000
VCE(V)
7/17
Electrical characteristics
STGW38IH130D, STGWT38IH130D
Figure 14. Emitter-collector diode
characteristics
Figure 15. Thermal impedance
AM09920v1
K 1.2
IFM(A)
100.0
1
Tj=125°C
(maximum values)
0.8
Tj=125°C
(typical values)
10.0
0.6
Tj=25°C
(maximum values)
Z th = k R th-JC
0.4
1.0
0.2
Single Pulse
VFM(V)
0.1
0.0
8/17
0.5
1.0
1.5
2.0
2.5
3.0
0
0.0001
Doc ID 15697 Rev 4
0.001
0.01
0.1
1
tp (s)
STGW38IH130D, STGWT38IH130D
3
Test circuits
Test circuits
Figure 16. Test circuit for inductive load
switching
Figure 17. Gate charge test circuit
AM01504v1
AM01505v1
Figure 18. Switching waveform
90%
10%
VG
90%
VCE
10%
Tr(Voff)
Tcross
90%
IC
10%
Td(off)
Td(on)
Tr(Ion)
Ton
Tf
Toff
AM01506v1
Doc ID 15697 Rev 4
9/17
Package mechanical data
4
STGW38IH130D, STGWT38IH130D
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 8.
TO-247 mechanical data
mm.
Dim.
Min.
Typ.
A
4.85
5.15
A1
2.20
2.60
b
1.0
1.40
b1
2.0
2.40
b2
3.0
3.40
c
0.40
0.80
D
19.85
20.15
E
15.45
15.75
e
5.30
L
14.20
14.80
L1
3.70
4.30
5.45
L2
10/17
Max.
5.60
18.50
∅P
3.55
3.65
∅R
4.50
5.50
S
5.30
5.50
Doc ID 15697 Rev 4
5.70
STGW38IH130D, STGWT38IH130D
Package mechanical data
Figure 19. TO-247 drawing
0075325_G
Doc ID 15697 Rev 4
11/17
Package mechanical data
Table 9.
STGW38IH130D, STGWT38IH130D
TO-247 long leads mechanical data
mm
Dim.
Min.
Typ.
A
4.90
5.15
D
1.85
2.10
E
0.55
0.67
F
1.07
1.32
F1
1.90
2.38
F2
2.87
3.38
G
10.90 BSC
H
15.77
16.02
L
20.82
21.07
L1
4.16
4.47
L2
5.49
5.74
L3
20.05
20.30
L4
3.68
3.93
L5
6.04
6.29
M
2.27
2.52
V
10°
V1
3°
V3
20°
Dia.
12/17
Max.
3.55
3.66
Doc ID 15697 Rev 4
STGW38IH130D, STGWT38IH130D
Package mechanical data
Figure 20. TO-247 long leads drawing
Doc ID 15697 Rev 4
13/17
Package mechanical data
Table 10.
STGW38IH130D, STGWT38IH130D
TO-3P mechanical data
mm
Dim.
Min.
Typ.
A
4.60
5
A1
1.45
1.50
1.65
A2
1.20
1.40
1.60
b
0.80
1
1.20
b1
1.80
2.20
b2
2.80
3.20
c
0.55
0.60
0.75
D
19.70
19.90
20.10
D1
E
13.90
15.40
15.80
E1
13.60
E2
9.60
e
5.15
5.45
5.75
L
19.50
20
20.50
L1
14/17
Max.
3.50
L2
18.20
øP
3.10
18.40
18.60
3.30
Q
5
Q1
3.80
Doc ID 15697 Rev 4
STGW38IH130D, STGWT38IH130D
Package mechanical data
Figure 21. TO-3P package dimensions
8045950_A
Doc ID 15697 Rev 4
15/17
Revision history
5
STGW38IH130D, STGWT38IH130D
Revision history
Table 11.
16/17
Document revision history
Date
Revision
Changes
11-May-2009
1
Initial release
16-Jul-2009
2
Document status promoted from preliminary data to datasheet
05-Jul-2011
3
Added: Figure 15 on page 8 and new package mechanical data
Table 10 on page 14, Figure 21 on page 15.
04-Sep-2012
4
Updated: Table 1 on page 1, TO-247 mechanical data Table 8 on
page 10 and Figure 19 on page 11.
Doc ID 15697 Rev 4
STGW38IH130D, STGWT38IH130D
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 15697 Rev 4
17/17