DC/DC Converters Heatsinks Heatsink Models Order code For converter series: THL-HS1 THL10WI, THL20WI THN-HS1 THN15, THN15WI, THN20, THN20WI TEN-HS1 TEN15, TEN20WIN, TEN20WIR, TEN30, TEN30WIN TEN-HS2 TEN20WI, TEN30WI TEN-HS3 TEN40, TEN40WI, TEN60 TEN-HS4 TEN15WI, TEN20, TEN40N, TEN40WIN, TEN50 TEN-HS5 TEN25, TEN25WI TEP-HS1 TEP75WI, TEP100, TEP160, TEP160WIR THL-HS1 Order code: THL-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material:Aluminum Finish: Anodic treatment (black) Weight: 8 g (0.28 oz) without converter Thermal impedance after assembling: 15.8 K/W 31.1 (1.22) max. Heat-sink Thermal pad Clamp Converter 14.5 (0.57) 16.5 (0.65) max. Dimensions in mm, () = Inch THN-HS1 Order code: THN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material:Aluminum Finish: Anodic treatment (black) Weight: 8 g (0.28 oz) without converter Thermal impedance after assembling: 15.8 K/W 31.1 (1.22) max. Heat-sink Thermal pad Clamp Converter 14.5 (0.57) 16.5 (0.65) max. Dimensions in mm, () = Inch http://www.tracopower.com Page 1 of 5 DC/DC Converters Heatsinks TEN-HS1 Order code: TEN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material:Aluminum Finish: Anodic treatment (black) Weight: 17 g (0.60oz) without converter Thermal impedance after assembling: 10 K/W 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 14.5 (0.57) 16.8 (0.66) max. Dimensions in mm, () = Inch TEN-HS2 Order code: TEN-HS2 (cont.: heat-sink, thermal pad, 2 clamps) Material:Aluminum Finish: Anodic treatment (black) Weight: 19 g (0.67oz) (without converter) 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 23.0 (0.9) 17.2 (0.68) max. Dimensions in mm, () = Inch http://www.tracopower.com Page 2 of 5 DC/DC Converters Heatsinks TEN-HS3 Order code: TEN-HS3 (cont.: heat-sink, thermal pad, 2 clamps) Material:Aluminum Finish: Anodic treatment (black) Weight: 22g (0.78oz) (without converter) Thermal impedance after assembling: 7.6 K/W 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 14.5 (0.57) 17.0 (0.67) max. Dimensions in mm, () = Inch TEN-HS4 Heat-sink Thermal pad Clamp Converter 23.0 (0.91) 17.2 (0.68) max. 31.0 (1.22) max. Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Material:Aluminum Finish: Anodic treatment (black) Weight: 17 g (0.60oz) without converter Thermal impedance after assembling: 10 K/W Dimensions in mm, () = Inch http://www.tracopower.com Page 3 of 5 DC/DC Converters Heatsinks TEN-HS5 Order code: TEN-HS5 (cont.: heat-sink, thermal pad, 2 clamps) Material:Aluminum Finish: Anodic treatment (black) Weight: 19 g (0.67oz) (without converter) 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 23.0 (0.9) 16.3 (0.64) max. Dimensions in mm, () = Inch 0.95 (11.4) (24.2) Order code: TEP-HS1 Includes heatsink with termal pad and mounting screws Weight: 135 g (4.76 oz) (Heatsink + converter) 0.45 TEP-HS1 2.40 (61.0) 2.28 (57.9) Top view Dimensions in Inch, () = mm http://www.tracopower.com Page 4 of 5 DC/DC Converters Heatsinks General Information Note: For volume orders converters will be supplied with heat-sinks preassembled and a TRACOPOWER side label attached to the converter. Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Assembly instructions for TEN and THN heatsinks Example: TEN30-2412WI with heatsink TEN-HS2 The product label on converter has to be removed before mounting the heat-sink. 1. Lay out the assembly and check it for any missing components or for any damage. 2. From the converter, remove the product label, including any remaining glue (best with benzine) and, if required, apply a hand-written part number / lot number marking on the side wall of the converter 3. Remove the protective foil from the adhesive thermal pad on the heat sink 4. Apply the heatsink to the converter and secure it by the two spring fixation clips included with the heat sink assembly Specifications can be changed any time without notice. Rev. 06/11 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com Page 5 of 5