MBRS1035CT - MBRS10150CT CREAT BY ART 10.0AMPS Surface Mount Schottky Barrier Rectifiers D2PAK Features UL Recognized File # E-326854 Plastic material used carriers Underwriters Laboratory Classification 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guard-ring for overvoltage protection High temperature soldering guaranteed: 260℃/10 seconds/.25", (6.35mm) from case Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: JEDEC D2PAK molded plastic body Terminals: Pure tin plated, lead free, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position:Any Mounting torque: 5 in. - lbs, max Weight: 1.35 grams Ordering Information Part No. Package Packing Packing code Green Compound Packing code MBRS10xxCT D2PAK 800 / 13" REEL RN RNG Note: "x" is Device Code from "35" thru "150". Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Repetitive Peak Reverse Voltage MBRS MBRS MBRS MBRS MBRS MBRS MBRS Symbol 1035 1045 1050 1060 1090 10100 10150 CT CT CT CT CT CT CT VRRM 35 45 50 60 90 100 150 Unit V Maximum RMS Voltage VRMS 24 31 35 42 63 70 105 V Maximum DC Blocking Voltage VDC 35 45 50 60 90 100 150 V Maximum Average Forward Rectified Current IF(AV) 10 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 120 A Peak Repetitive Reverse Surge Current (Note 1) IRRM 1 A Maximum Instantaneous Forward Voltage (Note 2) IF=5A, TA=25℃ IF=5A, TA=125℃ IF=10A, TA=25℃ IF=10A, TA=125℃ Maximum Reverse Current @ Rated VR TA=25 ℃ TA=100 ℃ TA=125℃ Typical Thermal Resistance Operating Temperature Range Storage Temperature Range VF 0.70 0.80 0.85 0.88 0.57 0.65 0.75 0.78 0.80 0.90 0.95 0.98 0.67 0.75 0.85 0.88 V 0.1 IR 15 10 - mA 5 - O RθjC 2 TJ - 65 to + 150 O C TSTG - 65 to + 175 O C Note 1: 2.0uS Pulse Width, f=1.0KHz Note 2: Pulse Test : 300uS Pulse Width, 1% Duty Cycle Version:G12 C/W RATINGS AND CHARACTERISTIC CURVES (MBRS1035CT THRU MBRS10150CT) FIG.1 FORWARD CURRENT DERATING CURVE AVERAGE FORWARD A CURRENT (A) 10 8 6 4 2 RESISTIVE OR INDUCTIVELOAD 0 50 60 70 80 90 100 110 120 130 140 150 PEAK FORWARD SURGE CURRENT (A) 12 FIG. 2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG 180 8.3mS Single Half Sine Wave JEDEC Method 150 120 90 60 30 0 1 10 FIG. 3 TYPICAL FORWARD CHARACTERISRICS PER LEG FIG. 4 TYPICAL REVERSE CHARACTERISTICS PER LEG 100 100 INSTANTANEOUS REVERSE A CURRENT (mA) INSTANTANEOUS FORWARD A CURRENT (A) MBRS1035CT-1045CT 10 MBRS1050CT- 1 MBRS10150CT TA=125℃ 10 1 TA=75℃ 0.1 0.01 TA=25℃ MBRS1090CT-10100CT 0.001 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 1.1 1.2 1.3 FORWARD VOLTAGE (V) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 5 TYPICAL JUNCTION CAPACITANCE FIG. 6 TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 1000 TRANSIENT THERMAL IMPEDANCE A (℃/W) 100 900 JUNCTION CAPACITANCE (pF) A 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE (oC) TA=25℃ f=1.0MHz Vsig=50mVp-p 800 700 10 600 500 400 300 200 100 0 1 0.1 0.1 1 10 REVERSE VOLTAGE (V) 100 0.01 0.1 1 10 T-PULSE DURATION(s) Version:G12 100 Tape & Reel specification Reel Size Tape Size 13" 24mm A max 330 B ±0.5 2 C ±0.5 13 D min 20.2 N ±0.5 75 Suggested PAD Layout Symbol A B C D E F G Unit(mm) 10.8 7 1.1 3.5 16.9 9.5 2.5 G +2.0;-0 24.4 T max 30.4 Unit (mm) Dimensions Unit(mm) DIM. Marking Diagram P/N = Specific Device Code G = Green Compound YWW = Date Code Unit(inch) Min Max Min Max A - 10.5 - 0.413 B 14.60 15.88 0.575 0.625 C 2.41 2.67 0.095 0.105 D 0.68 0.94 0.027 0.037 E 2.29 2.79 0.090 0.110 F 4.44 4.70 0.175 0.185 G 1.14 1.40 0.045 0.055 H I J K 1.14 8.25 0.36 2.03 1.40 9.25 0.53 2.79 0.045 0.325 0.014 0.080 0.055 0.364 0.021 0.110