SFT11G - SFT18G CREAT BY ART 1.0AMP. Glass Passivated Super Fast Rectifiers TS-1 Features High efficiency, low VF High current capability High reliability High surge current capability Low power loss For use in low voltage, high frequency inverter, Free wheeling, and polarity protection application Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode High temperature soldering guaranteed: 260℃/10 seconds/.375",(9.5mm) lead lengths at 5 lbs., (2.3kg) tension Mounting position: Any Weight: 0.20 grams Ordering Information (example) Part No. Package Packing INNER TAPE Packing code Packing code (Green) SFT11G TS-1 3K / AMMO box 26mm P0 P0G Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Maximum Recurrent Peak Reverse Voltage VRRM SFT 11G 50 Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Rectified Current IF(AV) 1 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 30 A Parameter Symbol Maximum Instantaneous Forward Voltage (Note 1) @1A VF Maximum DC Reverse Current at Rated @ TA=25 ℃ DC Blocking Voltage @ TA=125 ℃ IR Maximum Reverse Recovery Time (Note 2) Trr Typical Junction Capacitance (Note 3) Typical Thermal Resistance Operating Temperature Range Storage Temperature Range Cj SFT 12G 100 SFT 13G 150 SFT 14G 200 SFT 15G 300 SFT 16G 400 SFT 17G 500 SFT 18G 600 0.95 1.3 Units V 1.7 V 5 uA 100 uA 35 nS 20 10 pF O RθJA 100 TJ - 65 to + 150 O C TSTG - 65 to + 150 O C C/W Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:F13 RATINGS AND CHARACTERISTIC CURVES (SFT11G THRU SFT18G) FIG.2- TYPICAL REVERSE CHARACTERISTICS 1000 1.5 RESISTIVE OR INDUCTIVE LOAD INSTANTANEOUS REVERSE CURRENT (uA) AVERAGE FORWARD CURRENT (A) FIG.1- MAXIMUM AVERAGE FORWARD CURRENT DERATING 1.0 0.5 0.0 0 25 50 75 100 125 AMBIENT TEMPERATURE 150 175 (oC) FIG. 3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT (A) 35 TA=125℃ 10 TA=75℃ 1 TA=25℃ 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 30 25 8.3ms Single Half Sine Wave JEDEC Method 20 15 10 5 FIG. 5- TYPICAL FORWARD CHARACTERISTICS TA=25℃ 100 0 10 NUMBER OF CYCLES AT 60 Hz 100 INSTANTANEOUS FORWARD CURRENT (A) 1 FIG. 4- TYPICAL JUNCTION CAPACITANCE 70 JUNCTION CAPACITANCE (pF) 100 60 50 40 TA=25℃ 30 SFT11G-SFT14G 20 10 SFT15G-SFT18G 0 0.1 1 10 REVERSE VOLTAGE (V) 100 1000 TA=25℃ Pulse Width=300us 1% Duty Cycle 10 SFT15G-SFT16G SFT11G-SFT14G 1 SFT17G-SFT18G 0.1 0.4 0.6 0.8 1 1.2 1.4 1.6 FORWARD VOLTAGE (V) Version:F13 1.8 Ordering information Part No. SFT1xG (Note) Package Packing INNER TAPE Packing code Packing code (Green) TS-1 3K / AMMO box 26mm A1 A1G TS-1 3K / AMMO box 52mm A0 A0G TS-1 5K / 13" Reel 52mm R0 R0G B0 B0G 1K / Bulk packing TS-1 Note: "x" is Device Code from "1" thru "8". AXIAL LEAD TAPING SPECIFICATIONS Outline TS-1 TS-1 A ±0.5 5 5 B ±1.5 26 52.4 Z MAX 1.2 1.2 T ±0.4 6 6 E ∣L1-L2∣ MAX MAX 0.8 1 0.8 1 D 330 330 Suggested Mounting Hole Rule Symbol A B C D Unit(mm) 3 0.6 3.0 1 D1 ±0.3 85.7 85.7 D0 ±0.4 16.6 16.6 Unit (mm) W ±1.0 76 76 Dimensions DIM. Marking Diagram P/N = Specific Device Code G = Green Compound YW = Date Code Unit(mm) Unit(inch) Min Max Min Max A 2.00 2.70 0.079 0.106 B 0.53 0.64 0.021 0.025 C 25.40 - 1.000 - D 3.00 3.30 0.118 0.130 E 25.40 - 1.000 -