SRT12 - SRT115 creat by art 1.0AMP. Schottky Barrier Rectifiers TS-1 Features Plastic material used carries Underwriters Laboratory Classification 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability Guard-ring for transient protection For use in low voltage, high frequency inventers, free wheeling, and polarity protection applications High temperature soldering guaranteed: 260oC /10seconds, 0.375"(9.5mm) lead length at 5 lbs. (2.3 kg) tension Green compound with suffix "G" on packing code & prefix "G" on datecode. Mechanical Data Cases: Molded plastic body Terminals: Pure tin plated, lead free., solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode Mounting position: Any Weight: 0.20 grams Ordering Information (example) Part No. Package Packing INNER TAPE Packing code Green Compound Packing code SRT12 TS-1 3K / AMMO box 26mm P0 P0G Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Maximum Recurrent Peak Reverse Voltage VRRM SRT 12 20 Maximum RMS Voltage VRMS 14 21 28 35 42 63 70 105 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 90 100 150 V Maximum Average Forward Rectified Current IF(AV) 1 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 25 A Type Number Maximum Instantaneous Forward Voltage (Note 1) @1A Maximum D.C. Reverse Current at Rated DC Blocking Voltage @ TA=25 ℃ @ TA=100 ℃ @ TA=125℃ Typical Junction Capacitance (Note 2) Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range Symbol VF SRT 13 30 SRT 14 40 SRT 15 50 SRT 16 60 SRT 19 90 SRT 110 100 SRT 115 150 0.55 0.70 0.80 0.5 IR 10 110 RθJA TJ mA - mA 2 mA TSTG 28 pF O 50 - 65 to + 125 V 0.1 5 80 V 0.90 Cj Units - 65 to + 150 - 65 to + 150 Note1: Pulse Test with PW=300 usec, 1% Duty cycle Note2: Measured at 1.0 MHz and Applied VR=4.0 Volts Version:F12 C/W O C O C RATINGS AND CHARACTERISTIC CURVES (SRT12 THRU SRT115) 1.25 AVERAGE FORWARD CURRENT (A) FIG. 2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 50 1.00 SRT15 - SRT115 40 CURRENT (A) 0.75 SRT12 - SRT14 0.50 0.25 30 20 10 0 0.00 0 25 50 75 100 125 150 1 175 10 NUMBER OF CYCLES AT 60 Hz LEAD TEMPERATURE (oC) FIG. 3- TYPICAL INSTANEOUS FORWARD CHARACTERISTICS SRT12-SRT14 10 SRT15-SRT16 SRT19-SRT110 SRT115 1 TA=25oC Pulse Width=300μs 1% Duty Cycle 10 TA=125℃ 1 TA=75℃ 0.1 TA=25℃ 0.01 SRT19-SRT115 0.001 0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 0 2.1 FIG. 5- TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE (℃/W) SRT12-SRT14 60 80 100 120 140 10 SRT15-SRT16 100 SRT19-SRT115 10 1 40 10 REVERSE VOLTAGE (V) FIG. 6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS 100 1000 0.1 20 PERCENT OF RATED PEAK REVERSE VOLTAGE.(%) FORWARD VOLTAGE (V) JUNCTION CAPACITANCE (pF) FIG. 4- TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT (A) 100 100 100 1 0.1 0.01 0.1 1 10 100 PILSE DURATION, (sec) Version:F12 Ordering information Part No. SRT1x (Note) Package Packing INNER TAPE Packing code Green Compound Packing code TS-1 3K / AMMO box 26mm A1 A1G TS-1 3K / AMMO box 52mm A0 A0G TS-1 5K / 13" Reel 52mm R0 R0G TS-1 1K / Bulk packing B0 B0G Note: "x" is Device Code from "2" thru "15". AXIAL LEAD TAPING SPECIFICATIONS Outline TS-1 TS-1 A ±0.5 5 5 B ±1.5 26 52.4 Z MAX 1.2 1.2 T ±0.4 6 6 E ∣L1-L2∣ MAX MAX 0.8 1 0.8 1 D 330 330 Suggested Mounting Hole Rule Symbol A B C D Unit(mm) 3 0.6 3.0 1 D1 ±0.3 85.7 85.7 D0 ±0.4 16.6 16.6 Unit (mm) W ±1.0 76 76 Dimensions DIM. Marking Diagram P/N = Specific Device Code G = Green Compound YW = Date Code Unit(mm) Unit(inch) Min Max Min Max A 2.00 2.70 0.079 0.106 B 0.53 0.64 0.021 0.025 C 25.40 - 1.000 - D 3.00 3.30 0.118 0.130 E 25.40 - 1.000 -