UNISONIC TECHNOLOGIES CO., LTD TC4069 CMOS IC INVERTER CIRCUITS DESCRIPTION SOP-14 The UTC TC4069 consists of six inverter circuits and is manufactured using complementary MOS (CMOS) to achieve wide power supply operating range, low power consumption, high noise immunity, symmetric controlled rise and fall times. All inputs are protected from damage of static discharge by diode clamps to VDD and VSS. DIP-14 FEATURES * Wide supply voltage range: 3.0V ~ 18V. * High noise immunity: 0.45 VDD TYP. * Low Power TTL compatibility: Fan out of 2 driving 74L or 1 driving 74LS. ORDERING INFORMATION Ordering Number Lead Free TC4069L-D14-T TC4069L-S14-R TC4069L-S14-T Halogen Free TC4069G-D14-T TC4069G-S14-R TC4069G-S14-T www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd Package Packing DIP-14 SOP-14 SOP-14 Tube Tape Reel Tube 1 of 5 QW-R502-635.A TC4069 CMOS IC PIN CONFIGURATION VDD 14 13 12 11 10 9 1 2 3 4 5 6 8 7 VSS BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-635.A TC4069 CMOS IC ABSOLUTE MAXIMUM RATINGS (Note 2, 3) PARAMETER DC Supply Voltage Input Voltage Storage Temperature RATINGS UNIT -0.5 ~ +20 V -0.5 ~ VDD +0.5 V -65 ~ +150 ℃ DIP-14 300 Power Dissipation PD mW SOP-14 180 ℃ Junction Temperature TJ 125 ℃ Operating Temperature TOPR -40 ~ +85 ℃ Storage Temperature TSTG -65 ~ +150 Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. AC Parameters are guaranteed by DC correlated testing. 3. IOH and IOL are tested one output at a time. SYMBOL VDD VIN TS RECOMMENDED OPERATING CONDITIONS (VSS=0V ) PARAMETER DC Supply Voltage Input Voltage Operating Temperature SYMBOL VDD VIN TA RATINGS 3 ~ 18 0 ~ VDD -40 ~ 85 UNIT V V ℃ DC ELECTRICAL CHARACTERISTICS (TA=25℃, unless otherwise specified.)(Note 2) PARAMETER SYMBOL Quiescent Device Current IDD Low VOL High VOH Low VIL High VIH Low IOL High IOH Output Voltage Input Voltage Output Current (Note 3) Input Current IIN CONDITIONS VDD=5V, VIN=VDD or VSS VDD=10V, VIN=VDD or VSS VDD=15V, VIN=VDD or VSS VDD=5V |IO|<1μA VDD=10V VDD=15V VDD=5V |IO|<1μA VDD=10V VDD=15V VDD=5V, VO=4.5V |IO|<1μA VDD=10V, VO=9V VDD=15V,VO=13.5V VDD=5V, VO=0.5V |IO|<1μA VDD=10V, VO=1V VDD=15V, VO=1.5V VDD=5V, VO=0.4V VDD=10V, VO=0.5V VDD=15V, VO=1.5V VDD=5V, VO=4.6V VDD=5V, VO=2.5V VDD=10V, VO=9.5V VDD=15V, VO=13.5V VDD=15V, VIN=0V VDD=15V, VIN=15V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 4.95 9.95 14.95 TYP 0 0 0 5 10 15 MAX 0.25 0.5 1 0.05 0.05 0.05 μA V V 1.0 2.0 3.0 4.0 8.0 12.0 0.51 1.3 3.4 -0.51 -2.1 -1.3 -3.4 UNIT V V 1.2 3.2 12 -1 -4 -2.2 -9 -10-5 10-5 mA mA -0.1 0.1 μA 3 of 5 QW-R502-635.A TC4069 CMOS IC AC ELECTRICAL CHARACTERISTICS(Note 1) (TA=25℃, CL=50pF, RL=200kΩ, tr and tf ≤ 20 ns, unless otherwise specified) PARAMETER SYMBOL CONDITIONS VDD=5V Propagation Delay Time from Input tPHL or tPLH VDD=10V to Output VDD=15V VDD=5V Transition Time tTHL or tTLH VDD=10V VDD=15V Average Input Capacitance CIN Any Gate Notes: 1. AC Parameters are guaranteed by DC correlated testing. 2. IOH and IOL are tested one output at a time. 3. CPD determines the no load AC power consumption of any CMOS device. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 55 30 25 70 35 30 7.5 MAX 110 60 50 200 100 80 15 UNIT ns ns pF 4 of 5 QW-R502-635.A TC4069 CMOS IC AC TEST CIRCUITS AND SWITCHING TIME WAVEFORMS UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-635.A