UNISONIC TECHNOLOGIES CO., LTD U74LVC2G19 CMOS IC 1-OF-2 DECODER/DEMULTIPLEXER DESCRIPTION The U74LVC1G19 is a 1-of-2 decoder / demultiplexer with a common output enable. This device buffers the data on input A and passes it to the outputs 1Y and 2Y when the enable input signal is LOW. This device is fully specified for partial power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing the damaging backflow current through the device when it is powered down. FEATURES * Operate from 1.65V to 5.5V * Inputs accept voltages to 5.5V * Low power dissipation, ICC=10μA (Max) * ±24mA output drive(VCC=3V) ORDERING INFORMATION Ordering Number Lead Free U74LVC1G19L-AL6-R U74LVC1G19L-AL6-R Halogen Free U74LVC1G19G-AL6-R Package Packing SOT-363 Tape Reel (1)Packing Type (1) R: Tape Reel (2)Package Type (2) AL6: SOT-363 (3)Lead Free (3) Halogen Free, L: Lead Free MARKING www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-792.A U74LVC1G19 PIN CONFIGURATION PIN DESCRIPTION SYMBOL A GND E 2Y Vcc 1Y CMOS IC PIN 1 2 3 4 5 6 DESCRIPTION Data input Ground(0V) Enable input Data output Supply voltage Data output FUNCTION TABLE INPUT OUTPUT A E L L L H H X Note: H: HIGH voltage level; L: LOW voltage level 1Y L H H 2Y H L H LOGIC DIAGRAM (positive logic) 1 A 1Y 6 2Y 4 3 E IEC logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-792.A U74LVC1G19 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL VCC VIN Supply Voltage Input Voltage RATINGS -0.5 ~ +6.5 -0.5 ~ +6.5 -0.5 ~ VCC+0.5 Output in the high or low state VOUT Output in the high-impedance or -0.5 ~ +6.5 power-off state VCC or GND Current ICC ±100 Continuous Output Current (VOUT=0 to VCC) IOUT ±50 Input Clamp Current (VIN<0) IIK -50 Output Clamp Current (VOUT<0) IOK -50 Storage Temperature Range TSTG -65 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Output Voltage UNIT V V V V mA mA mA mA °C RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Operating Temperature SYMBOL VCC VIN VOUT TA Input Transition Rise or Fall Rate Δt/Δv TEST CONDITIONS Operating High or low state VCC=1.8V±0.15V, 2.5V±0.2V VCC=3.0V±0.3V VCC=5V±0.5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.65 0 0 -40 TYP MAX 5.5 5.5 VCC 85 20 10 5 UNIT V V V °C ns/V ns/V ns/V 3 of 5 QW-R502-792.A U74LVC1G19 CMOS IC ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER High-level Input Voltage Low-level Input Voltage High-Level Output Voltage Low-Level Output Voltage Input Leakage Current Power OFF Leakage Current Quiescent Supply Current SYMBOL VIH VIL VOH VOL II(LEAK) Ioff ICC Additional Quiescent Supply Current Per Input Pin ΔICC Input Capacitance CI TYP MAX 0.07 0.12 0.17 0.33 0.39 ±0.1 ±0.1 0.1 0.45 0.30 0.40 0.55 0.55 ±1 ±10 UNIT V V V V V V V V V V V V V V V V V V V V μA μA 0.1 10 μA 5 500 μA 0.35*VCC 0.7 0.8 0.3*VCC 1.54 2.15 2.50 2.62 4.11 3.5 pF SWITCHING CHARACTERISTICS (TA=25°С) PARAMETER Propagation delay from input (A or E ) to output(Y) TEST CONDITIONS MIN VCC=1.65V ~ 1.95V 0.65*VCC VCC=2.3V ~ 2.7V 1.7 VCC=2.7V ~ 3.6V 2 VCC=4.5V ~ 5.5V 0.7*VCC VCC=1.65V ~ 1.95V VCC=2.3V ~ 2.7V VCC=2.7V ~ 3.6V VCC=4.5V ~ 5.5V VCC=1.65 ~ 5.5V VCC-0.1 IOH=-100μA IOH=-4mA VCC=1.65V 1.2 IOH=-8mA VCC=2.3V 1.9 IOH=-16mA VCC=3.0V 2.4 IOH=-24mA VCC=3.0V 2.3 IOH=-32mA VCC=4.5V 3.8 VCC=1.65 ~ 5.5V IOL=100μA IOL=4mA VCC=1.65V IOL=8mA VCC=2.3V IOL=16mA VCC=2.7V IOL=24mA VCC=3.0V IOL=32mA VCC=4.5V VIN=5.5V or GND, VCC=0 ~ 5.5V VIN or VOUT=5.5V, VCC=0V VIN=5.5V or GND, IOUT=0 VCC=1.65 ~ 5.5V VCC=2.3 ~ 5.5V, One input at VCC-0.6V, Other inputs at VCC or GND VCC=3.3V, VIN=VCC or GND SYMBOL tPLH/tPHL TEST CONDITIONS VCC=1.8V±0.15V, CL=30 pF RU=1KΩ MIN TYP MAX UNIT 3.2 4.0 16.1 ns VCC=2.5V±0.2V, CL=30pF RC=500Ω 1.5 2.5 65 ns VCC=3.3V±0.3V, CL=50 pF RC=500Ω 1.1 2.5 5.2 ns VCC=5V±0.5V, CL=50pF RC=500Ω 0.5 1.8 3.9 ns MIN TYP MAX UNIT OPERATING CHARACTERISTICS (TA=25°С) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDITIONS VI = GND to VCC, VCC=3.3V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 16 pF 4 of 5 QW-R502-792.A U74LVC1G19 CMOS IC TEST CIRCUIT AND WAVEFORMS From Output CL RL TEST CIRCUIT VCC 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V Inputs VIN VCC tR, tF ≤2ns VCC 2.7V VCC ≤2ns ≤2.5ns ≤2.5ns VM CL RL VCC/2 VCC/2 1.5V VCC/2 30pF 30pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω Note: CL includes probe and jig capacitance. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, Zo = 50Ω. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-792.A