UNISONIC TECHNOLOGIES CO., LTD UH8102 CMOS IC LOW POWER HALL EFFECT SWITCH DESCRIPTION UH8102 is a low-power integrated Hall switch designed to sense the applied magnetic flux density and give a digital output, which indicates the present condition of the magnitude sensed. It mainly designed for battery-powered system and hand-held equipment, such as cellular flip-phones and PDA’s, in which power consumption is one major concern. The typical power consumption of UH8100 at down to 10uW in 2.7V supply. For UH8102A, the output will be at the “Low” level when no magnetic field is applied. When the applied magnetic flux density is stronger than the switching threshold, the output would be at the “High” level. For UH8102B, the output will be at the “High” level when no magnetic field is applied. When the applied magnetic flux density is stronger than the switching threshold, the output would be at the “Low” level. 3 2 1 SOT-23 FEATURES *Micropower Operation *2.4V to 5.5V Battery Operation *Offset Canceling Technology *Superior Temperature Stability *Extremely Low Switch-Point Drift *Insensitive to Physical Stress ORDERING INFORMATION Ordering Number Lead Free Halogen Free UH8102AL-AE3-R UH8102AG-AE3-R UH8102BL-AE3-R UH8102BG-AE3-R Note: O: Output, I: VDD, G: Gnd Package SOT-23 SOT-23 UH8102X G-AE3-R Pin Assignment 1 2 3 O I G O I G Packing Tape Reel Tape Reel (1) R:Tape Reel (1) Packing Type (2) AE3:SOT-23 (2) Package Type (3) L: Lead Free, G:Halogen Free (3) Halogen Free (4) A: LOW (4) B: HIGH (4) Magnetic Perform www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd 1 of 7 QW-R502-414.C UH8102 MARKING INFORMATION PIN CONFIGURATION PIN DESCRIPTION CMOS IC PIN NAME PIN TYPE PIN DESCRIPTION VOUT O Digital Output VDD P Power Supply GND G Ground Note: O=Output, P=Power Supply, G=Ground UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 7 QW-R502-414.C UH8102 CMOS IC BLOCK DIAGRAM VDD VOUT Hall Plate GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 7 QW-R502-414.C UH8102 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT Magnetic Flux Density B Unlimited mT Supply Voltage VDD 5.5 V Supply current IQ -1 ~ +2.5 mA Junction Temperature TJ 150 °C Operation Temperature TOPR -40 ~ +85 °C Storage Temperature TSTG -40 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS (TA=25°C) PARAMETER Supply Voltage Output Voltage Ambient Temperature CONDITIONS Operating MIN 2.4 -0.3 -40 TYP 2.7 2.7 25 MAX 5.5 5.5 85 UNIT V V °C MIN TYP 0.1 0.01 1.1 2.5 3 60 150 0.04 MAX UNIT V uA mA uA uA us ms % ELECTRICAL CHARACTERISTICS (TA=25°C) PARAMETER Output Saturation Voltage Output Leakage Current Supply Current Operating Time Standby Time Duty Cycle SYMBOL VDD VOUT TA SYMBOL VSAT IOFF IDD(EN) IDD(DIS) IDD(AVG) TOP TSD D.C. CONDITIONS VDD=2.7V VDD=2.7V Chip enable VDD=2.7V 20 MAGNETIC CHARACTERISTICS ( TA=25°C,VDD=2.7V) For UH8102A (LOW level when no magnetic field is applied) Rank 1 PARAMETER SYMBOL MIN Operation Points |BOP| 7 Release Points |BRP| 15 Hysteresis |BOP–BRP| 5 Rank 2 PARAMETER SYMBOL MIN Operation Points |BOP| 7 Release Points |BRP| 15 Hysteresis |BOP–BRP| 5 For UH8102B (HIGH level when no magnetic field is applied) Rank 1 PARAMETER SYMBOL MIN Operation Points |BOP| 15 Release Points |BRP| 7 Hysteresis |BOP–BRP| 5 Rank 2 PARAMETER SYMBOL MIN Operation Points |BOP| 15 Release Points |BRP| 7 Hysteresis |BOP–BRP| 5 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP 15 25 10 MAX 25 35 15 TYP MAX 50 70 50 TYP 25 15 10 MAX 35 25 15 TYP MAX 70 50 50 UNIT Gauss UNIT Gauss UNIT Gauss UNIT Gauss 4 of 7 QW-R502-414.C UH8102 CMOS IC TYPICAL APPLICATION CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 7 QW-R502-414.C UH8102 CMOS IC MAGNETIC FLUX VQ Turn OFF VOH Turn ON VOL B RPN BOPN 0 BOPS BRPS B UH8102A (LOW level when no magnetic field is applied) UH8102B (HIGH level when no magnetic field is applied) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 7 QW-R502-414.C UH8102 CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 7 QW-R502-414.C