UNISONIC TECHNOLOGIES CO., LTD
UT70P03
Power MOSFET
75A, 30V P-CHANNEL
POWER MOSFET
1
DESCRIPTION
The UT70P03 uses advanced trench technology to provide
excellent RDS(ON), low gate charge and operation with low gate
voltages. This device is suitable for use as a load switch or in
PWM applications.
1
TO-220F
FEATURES
* RDS(ON) = 8mΩ @ VGS = -10 V
* Low Capacitance
* Low Gate Charge
* Fast Switching Capability
* Avalanche Energy Specified
TO-220
1
TO-251
SYMBOL
2.Drain
1
TO-252
1.Gate
3.Source
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
UT70P03L-TA3-T
UT70P03G-TA3-T
UT70P03L-TF3-T
UT70P03G-TF3-T
UT70P03L-TM3-T
UT70P03G-TM3-T
UT70P03L-TN3-R
UT70P03G-TN3-R
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
Package
TO-220
TO-220F
TO-251
TO-252
Pin Assignment
1
2
3
G
D
S
G
D
S
G
D
S
G
D
S
Packing
Tube
Tube
Tube
Tape Reel
1 of 5
QW-R502-210.F
UT70P03
Power MOSFET
ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified)
PARAMETER
RATINGS
UNIT
Drain-Source Voltage
-30
V
Gate-Source Voltage
±20
V
Continuous Drain Current , VGS=4.5V
TC=25°C
-75
A
Pulsed Drain Current(Note 2)
-350
A
TO-220
147
Power Dissipation (TC=25°C)
PD
W
TO-220F
37
TO-251/ TO-252
107
Junction Temperature
TJ
+175
°C
Strong Temperature
TSTG
-55 ~ +175
°C
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Pulse width limited by safe operating area.
SYMBOL
VDSS
VGSS
ID
IDM
THERMAL DATA
PARAMETER
Junction to Ambient
Junction to Case
SYMBOL
TO-220/TO-220F
TO-251/ TO-252
TO-220
TO-220F
TO-251/ TO-252
θJA
θJC
RATING
62.5
110
0.85
3.4
1.4
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
OFF CHARACTERISTICS
Drain-Source Breakdown Voltage
BVDSS
VGS =0 V, ID =-250 µA
-30
ΔBVDSS
Breakdown Voltage Temperature
Reference to 25°C, ID=-1mA
ΔTJ
Coefficient
Drain-Source Leakage Current
IDSS
VDS = -30 V, VGS =0 V, TJ =25°C
Gate-Body Leakage Current
IGSS
VGS = ±20 V
ON CHARACTERISTICS
Gate Threshold Voltage
VGS(TH)
VDS =VGS, ID =-250 µA
-1
Static Drain-Source On-Resistance
VGS =-10 V, ID =-45 A
RDS(ON)
(Note 2)
VGS =-4.5 V, ID =-30 A
DYNAMIC PARAMETERS
Input Capacitance
CISS
VDS =-25 V, VGS =0 V, f=1.0MHz
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
SWITCHING PARAMETERS
Total Gate Charge(Note 2)
QG
VDS =-24 V, VGS =-4.5 V,
Gate Source Charge
QGS
ID =-30 A
Gate Drain ("Miller") Charge
QGD
Turn-ON Delay Time(Note 2)
tD(ON)
Turn-ON Rise Time
tR
VGS=-10V,VDS=-15V, RD=0.5 Ω,
ID =-30 A , RG =3.3 Ω
Turn-OFF Delay Time
tD(OFF)
Turn-OFF Fall-Time
tF
SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS
Forward On Voltage(Note 2)
VSD
IS=-45 A,VGS=0V
Reverse Recovery Time
tRR
IS=-30 A, VGS=0 V,
dI/dt=100 A/μs
Reverse Recovery Charge
QRR
Notes: 1.Pulse width ≤ 300μs, duty cycle ≤ 2%.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TYP
MAX
UNIT
V
-0.018
V/°C
-1
±100
µA
nA
-3
8
10
V
mΩ
mΩ
2700
550
380
4200
pF
pF
pF
33
7.5
24
11.2
77
35
67
52
nC
nC
nC
ns
ns
ns
ns
-1.3
V
ns
nC
28
10
2 of 5
QW-R502-210.F
UT70P03
Drain Current,-ID (A)
TYPICAL CHARACTERISTICS
Drain Current,-ID (A)
Power MOSFET
13
2.0
ID=-20A
TC=25°С
11
Normalized RDS(ON)
On-Resistance,RDS(ON) (mΩ)
Normalized On-Resistance vs.
Junction Temperature
On-Resistance vs. Gate Voltage
9
7
ID=-20A
VG=-10V
1.5
1.0
5
3
0.5
-50
12
25
100
Junction Temperature,TJ (°С)
175
Gate Threshold Voltage,-VGS(th) (V)
10
4
8
6
Gate-to-Source Voltage,-VGS (V)
Reverse Drain Current,-IS (A)
2
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 5
QW-R502-210.F
UT70P03
TYPICAL CHARACTERISTICS(Cont.)
Normalized Thermal Response (θJc)
Capacitance (pF)
Gate to Source Voltage,-VGS (V)
Power MOSFET
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 5
QW-R502-210.F
UT70P03
Power MOSFET
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R502-210.F