Data Sheet VXM7 Microprocessor Crystals Product is compliant to RoHS directive and fully compatible with lead free assembly Features Applications Small Ceramic SMD Package Low Profile Tape & Reel Tight Tolerance and Stability Electrical Performance Parameter Frequency (Fundamental – AT-cut) Frequency Stability (ordering option) Load Capacitance (ordering option) Standard Calibration Tolerance Equivalent Series Resistance 12.00 to 12.99 MHz 13.00 to 13.99 MHz 14.00 to 18.99 MHz 19.00 to 29.99 MHz 30.00 to 50.00 MHz Shunt Capacitance Drive Level Aging Storage Temperature Insulation Resistance Package Size Page1/4 OA AV Machine Bluetooth Wireless LAN Symbol fO fstab CL finitial ESR Min 12 Maximum 50 See ordering options 10 32 -10 10 CO DL Tstorage IR Typical 10 -40 500 200 150 100 80 60 5.0 100 5 90 3.2 x 2.5 x 0.6 Revision:October 7, 2008 Units MHz ppm pF ppm Ohms Ohms Ohms Ohms Ohms pF uW ppm/year °C MOhms mm VXM7 Datasheet Package Drawing Tape and Reel Dimensions (mm) Package A VXM7 8.0 B 3.5 C D E F G H I J K L Φ1.5 4.0 4.0 2.5 11 Φ13 60.2 1.75 8.0 178.0 J F C D G B A L I E H Page2/4 K Revision: October 7, 2008 VXM7 Datasheet Suggested IR profile The VXM7 are qualified to meet the JEDEC standard for Pb-Free assembly. The temperatures and time intervals listed are based on the Pb-Free small body requirements and parameters are listed in the table below The VXM7 are hermetically sealed so an aqueous wash is not an issue. Reflow Profile (IPC/JEDEC J-STD-020) Parameter PreHeat Time Ramp Up Time Above 217 oC Time To Peak Temperature Time At 260 oC Ramp Down Symbol tS R UP tL t AMB-P tP R DN Value 60 sec Min, 180 sec Max 3 oC/sec Max 60 sec Min, 150 sec Max 480 sec Max 20 sec Max 6 oC/sec Max tL 260 Temperature (DegC) R UP 217 200 tP R DN 150 tS t AMB-P 25 Time (sec) Ordering Information Page3/4 Revision: October 7, 2008 VXM7 Datasheet Not all combinations are possible For Additional Information, Please Contact: USA: Vectron International, 267 Lowell Rd, Hudson, NH 03051 . . . . . . . Tel: 1-88-VECTRON-1 Fax: 1-888-FAX-VECTRON EUROPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 49 (0) 7268 8010 Fax: 49 (0) 7268 801281 ASIA: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 86 21 5048 0777 Fax: 86 21 5048 1881 Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Page4/4 Revision: October 7, 2008