TI TL780-05CKTTR

TL780 SERIES
POSITIVE-VOLTAGE REGULATORS
www.ti.com
SLVS055M – APRIL 1981 – REVISED OCTOBER 2006
FEATURES
•
•
•
±1% Output Tolerance at 25°C
±2% Output Tolerance Over Full Operating
Range
Thermal Shutdown
•
•
•
Internal Short-Circuit Current Limiting
Pinout Identical to µA7800 Series
Improved Version of µA7800 Series
OUTPUT
COMMON
INPUT
KCS (TO-220) PACKAGE
(TOP VIEW)
COMMON
COMMON
KC (TO-220) PACKAGE
(TOP VIEW)
KTT (TO-263) PACKAGE
(TOP VIEW)
OUTPUT
COMMON
INPUT
COMMON
COMMON
KTE PACKAGE
(TOP VIEW)
OUTPUT
COMMON
INPUT
OUTPUT
COMMON
INPUT
DESCRIPTION/ORDERING INFORMATION
Each fixed-voltage precision regulator in the TL780 series is capable of supplying 1.5 A of load current. A unique
temperature-compensation technique, coupled with an internally trimmed band-gap reference, has resulted in
improved accuracy when compared to other three-terminal regulators. Advanced layout techniques provide
excellent line, load, and thermal regulation. The internal current-limiting and thermal-shutdown features
essentially make the devices immune to overload.
ORDERING INFORMATION
TJ
VO TYP
(V)
5
0°C to 125°C
12
15
(1)
PACKAGE (1)
TOP-SIDE
MARKING
ORDERABLE PART NUMBER
PowerFLEX™ – KTE
Reel of 2000
TL780-05CKTER
TL780-05C
TO-220 – KC
Tube of 50
TL780-05CKC
TL780-05C
TO-220, short shoulder – KCS
Tube of 20
TL780-05KCS
TL780-05
TO-263 – KTT
Reel of 500
TL780-05CKTTR
TL780-05C
TO-220 – KC
Tube of 50
TL780-12CKC
TL780-12C
TO-220, short shoulder – KCS
Tube of 20
TL780-12KCS
TL780-12
TO-220 – KC
Tube of 50
TL780-15CKC
TL780-15C
TO-220, short shoulder – KCS
Tube of 20
TL780-15KCS
TL780-15
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerFLEX, PowerPAD are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1981–2006, Texas Instruments Incorporated
TL780 SERIES
POSITIVE-VOLTAGE REGULATORS
www.ti.com
SLVS055M – APRIL 1981 – REVISED OCTOBER 2006
SCHEMATIC
INPUT
OUTPUT
COMMON
Absolute Maximum Ratings (1)
over operating temperature ranges (unless otherwise noted)
MIN
VI
Input voltage
TJ
Tstg
(1)
MAX
UNIT
35
V
Operating virtual junction temperature
150
°C
Lead temperature 1,6 mm (1/16 in) from case for 10 s
260
°C
150
°C
Storage temperature range
–65
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Package Thermal Data (1)
(1)
(2)
2
PACKAGE
BOARD
θJP (2)
θJC
θJA
PowerFLEX (KTE)
High K, JESD 51-5
2.7°C/W
11.6°C/W
23.3°C/W
TO-220 (KC/KCS)
High K, JESD 51-5
3°C/W
17°C/W
19°C/W
TO-263 (KTT)
High K, JESD 51-5
1.91°C/W
18°C/W
25.3°C/W
Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. Due to variations in
individual device electrical characteristics and thermal resistance, the built-in thermal overload protection may be activated at power
levels slightly above or below the rated dissipation.
For packages with exposed thermal pads, such as QFN, PowerPAD™, or PowerFLEX, θJP is defined as the thermal resistance between
the die junction and the bottom of the exposed pad.
Submit Documentation Feedback
TL780 SERIES
POSITIVE-VOLTAGE REGULATORS
www.ti.com
SLVS055M – APRIL 1981 – REVISED OCTOBER 2006
Recommended Operating Conditions
VI
Input voltage
IO
Output current
TJ
Operating virtual junction temperature
MIN
MAX
UNIT
TL780-05C
7
25
TL780-12C
14.5
30
TL780-15C
17.5
30
1.5
A
0
125
°C
V
Electrical Characteristics
at specified virtual junction temperature, VI = 10 V, IO = 500 mA (unless otherwise noted)
PARAMETER
Output voltage
Input voltage regulation
Ripple rejection
Output voltage regulation
TEST CONDITIONS
IO = 5 mA to 1 A, P ≤ 15 W,
VI = 7 V to 20 V
VI = 7 V to 25 V
VI = 8 V to 12 V
VI = 8 V to 18 V, f = 120 Hz
IO = 5 mA to 1.5 A
IO = 250 mA to 750 mA
TJ (1)
TL780-05C
MIN
TYP
MAX
25°C
4.95
5
5.05
0°C to 125°C
4.9
25°C
0°C to 125°C
25°C
70
5.1
0.5
5
0.5
5
85
25
1.5
15
0°C to 125°C
0.0035
IO = 5 mA
0°C to 125°C
0.25
Output noise voltage
f = 10 Hz to 100 kHz
25°C
75
Dropout voltage
IO = 1 A
25°C
2
25°C
5
8
0.7
1.3
0.003
0.5
VI = 7 V to 25 V
IO = 5 mA to 1 A
0°C to 125°C
mV
mV
Ω
f = 1 kHz
Temperature coefficient of
output voltage
Input bias-current change
V
dB
4
Output resistance
Input bias current
UNIT
mV/°C
µV
V
mA
mA
Short-circuit output current
25°C
750
mA
Peak output current
25°C
2.2
A
(1)
Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.22-µF capacitor across
the output.
Submit Documentation Feedback
3
TL780 SERIES
POSITIVE-VOLTAGE REGULATORS
www.ti.com
SLVS055M – APRIL 1981 – REVISED OCTOBER 2006
Electrical Characteristics
at specified virtual junction temperature, VI = 19 V, IO = 500 mA (unless otherwise noted)
PARAMETER
Output voltage
Input voltage regulation
Ripple rejection
Output voltage regulation
TEST CONDITIONS
IO = 5 mA to 1 A, P ≤ 15 W,
VI = 14.5 V to 27 V
VI = 14.5 V to 30 V
VI = 16 V to 22 V
VI = 15 V to 25 V, f = 120 Hz
IO = 5 mA to 1.5 A
IO = 250 mA to 750 mA
TJ (1)
TL780-12C
MIN
TYP
MAX
25°C
11.88
12
12.12
0°C to 125°C
11.76
25°C
0°C to 125°C
65
25°C
12.24
1.2
12
1.2
12
80
UNIT
V
mV
dB
6.5
60
2.5
36
mV
Ω
Output resistance
f = 1 kHz
0°C to 125°C
0.0035
Temperature coefficient of
output voltage
IO = 5 mA
0°C to 125°C
0.6
mV/°C
Output noise voltage
f = 10 Hz to 100 kHz
25°C
180
µV
Dropout voltage
IO = 1 A
25°C
2
25°C
5.5
8
0.4
1.3
0.03
0.5
Input bias current
Input bias-current change
VI = 14.5 V to 30 V
IO = 5 mA to 1 A
0°C to 125°C
V
mA
mA
Short-circuit output current
25°C
350
mA
Peak output current
25°C
2.2
A
(1)
Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.22-µF capacitor across
the output.
Electrical Characteristics
at specified virtual junction temperature, VI = 23 V, IO = 500 mA (unless otherwise noted)
PARAMETER
Output voltage
Input voltage regulation
Ripple rejection
Output voltage regulation
TEST CONDITIONS
IO = 5 mA to 1 A, P ≤ 15 W,
VI = 17.5 V to 30 V
VI = 17.5 V to 30 V
VI = 20 V to 26 V
VI = 18.5 V to 28.5 V, f = 120 Hz
IO = 5 mA to 1.5 A
IO = 250 mA to 750 mA
TL780-15C
MIN
TYP
MAX
25°C
14.85
15
15.15
0°C to 125°C
14.7
25°C
0°C to 125°C
25°C
60
15.3
1.5
15
1.5
15
75
UNIT
V
mV
dB
7
75
2.5
45
mV
Ω
Output resistance
f = 1 kHz
0°C to 125°C
0.0035
Temperature coefficient of
output voltage
IO = 5 mA
0°C to 125°C
0.62
mV/°C
Output noise voltage
f = 10 Hz to 100 kHz
25°C
225
µV
Dropout voltage
IO = 1 A
25°C
2
25°C
5.5
8
0.4
1.3
0.02
0.5
Input bias current
Input bias-current change
VI = 17.5 V to 30 V
IO = 5 mA to 1 A
0°C to 125°C
V
mA
mA
Short-circuit output current
25°C
230
mA
Peak output current
25°C
2.2
A
(1)
4
TJ (1)
Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.22-µF capacitor across
the output.
Submit Documentation Feedback
TL780 SERIES
POSITIVE-VOLTAGE REGULATORS
www.ti.com
SLVS055M – APRIL 1981 – REVISED OCTOBER 2006
PARAMETER MEASUREMENT INFORMATION
TL780
INPUT
C1 = 0.33 µF
(see Note B)
I
O
C
A.
Permanent damage can occur when OUTPUT is pulled below ground.
B.
C1 is required when the regulator is far from the power-supply filter.
C.
C2 is not required for stability; however, transient response is improved.
OUTPUT
(see Note A)
C2 = 0.22 µF
(see Note C)
Figure 1. Test Circuit
Submit Documentation Feedback
5
TL780 SERIES
POSITIVE-VOLTAGE REGULATORS
www.ti.com
SLVS055M – APRIL 1981 – REVISED OCTOBER 2006
APPLICATION INFORMATION
INPUT
+
OUTPUT
TL780-xx
VI
GND
IL
COMMON
VO
Figure 2. Positive Regulator in Negative Configuration (VI Must Float)
TL780-xx
INPUT
R1
VO(Reg)
C1
0.33 µF
OUTPUT
IO
IO = (VO/R1) + IO Bias Current
Figure 3. Current Regulator
Operation With a Load Common to a Voltage of Opposite Polarity
In many cases, a regulator powers a load that is not connected to ground, but instead, is connected to a voltage
source of opposite polarity (e.g., operational amplifiers, level-shifting circuits, etc.). In these cases, a clamp diode
should be connected to the regulator output as shown in Figure 4. This protects the regulator from output
polarity reversals during startup and short-circuit operation.
TL780-xx
VI
VO
1N4001
or
Equivalent
–VO
Figure 4. Output Polarity-Reversal-Protection Circuit
Reverse-Bias Protection
Occasionally, the input voltage to the regulator can collapse faster than the output voltage. This, for example,
could occur when the input supply is crowbarred during an output overvoltage condition. If the output voltage is
greater than approximately 7 V, the emitter-base junction of the series pass element (internal or external) could
break down and be damaged. To prevent this, a diode shunt can be employed, as shown in Figure 5.
VI
TL780-xx
VO
Figure 5. Reverse-Bias-Protection Circuit
6
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
21-Nov-2006
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TL780-05CKC
NRND
TO-220
KC
3
50
Lead/Ball Finish
Pb-Free
(RoHS)
CU SN
MSL Peak Temp (3)
N / A for Pkg Type
TL780-05CKTER
NRND
PFM
KTE
3
2000
TBD
CU SNPB
Level-1-220C-UNLIM
TL780-05CKTTR
ACTIVE
DDPAK/
TO-263
KTT
3
500
Green (RoHS &
no Sb/Br)
CU SN
Level-3-245C-168 HR
TL780-05CKTTRG3
ACTIVE
DDPAK/
TO-263
KTT
3
500
Green (RoHS &
no Sb/Br)
CU SN
Level-3-245C-168 HR
TL780-05KCS
ACTIVE
TO-220
KCS
3
50
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
TL780-05KCSE3
ACTIVE
TO-220
KCS
3
50
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
TL780-12CKC
NRND
TO-220
KC
3
50
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
TL780-12CKCE3
NRND
TO-220
KC
3
50
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
TL780-12CKTER
OBSOLETE
PFM
KTE
3
TBD
Call TI
Call TI
TL780-12KCS
ACTIVE
TO-220
KCS
3
50
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
TL780-15CKC
NRND
TO-220
KC
3
50
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
TL780-15CKTER
OBSOLETE
PFM
KTE
3
TBD
Call TI
Call TI
TL780-15KCS
ACTIVE
TO-220
KCS
3
50
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
21-Nov-2006
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MPFM001E – OCTOBER 1994 – REVISED JANUARY 2001
KTE (R-PSFM-G3)
PowerFLEX PLASTIC FLANGE-MOUNT
0.375 (9,52)
0.080 (2,03)
0.070 (1,78)
0.365 (9,27)
0.360 (9,14)
0.050 (1,27)
0.040 (1,02)
0.350 (8,89)
0.220 (5,59)
NOM
0.010 (0,25) NOM
Thermal Tab
(See Note C)
0.360 (9,14)
0.350 (8,89)
0.295 (7,49)
NOM
0.320 (8,13)
0.310 (7,87)
0.420 (10,67)
0.410 (10,41)
1
3
0.025 (0,63)
0.031 (0,79)
0.100 (2,54)
Seating Plane
0.004 (0,10)
0.010 (0,25) M
0.005 (0,13)
0.001 (0,03)
0.200 (5,08)
0.041 (1,04)
0.031 (0,79)
0.010 (0,25)
NOM
Gage Plane
3°– 6°
0.010 (0,25)
4073375/F 12/00
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
The center lead is in electrical contact with the thermal tab.
Dimensions do not include mold protrusions, not to exceed 0.006 (0,15).
Falls within JEDEC MO-169
PowerFLEX is a trademark of Texas Instruments.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to
discontinue any product or service without notice. Customers should obtain the latest relevant information
before placing orders and should verify that such information is current and complete. All products are sold
subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent
TI deems necessary to support this warranty. Except where mandated by government requirements, testing
of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible
for their products and applications using TI components. To minimize the risks associated with customer
products and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent
right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine,
or process in which TI products or services are used. Information published by TI regarding third-party
products or services does not constitute a license from TI to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or
other intellectual property of the third party, or a license from TI under the patents or other intellectual
property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not
responsible or liable for such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for
that product or service voids all express and any implied warranties for the associated TI product or service
and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Low Power Wireless
www.ti.com/lpw
Telephony
www.ti.com/telephony
Mailing Address:
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated