COILCRAFT 132

Document 185-1
Maxi Spring™ Air Core Inductors
• Air core inductors feature higher Q, L and current ratings
• Rigid package provides a flat surface for pick and place
• Leads are locked in position for precise terminal spacing
Weight 0.42 – 0.59 g
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 800/13″ reel Plastic tape: 24 mm wide, 0.3 mm thick,
12 mm pocket spacing, 6.1 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Inductance2
Percent
Part number1Turns (nH) tolerance3
132-09SM_L_9 90
5,2
132-10SM_L_10 111
5,2
132-11SM_L_11 130
5,2
132-12SM_L_12 169
5,2
132-13SM_L_13 206
5,2
Q2
Q2
Test freq. SRF min4 DCR max5 Irms6
typ min (MHz) (GHz) (mOhm)(A)
11495
50 1.140 15 3.5
10487
50 1.020 15 3.5
10487
50 0.900 20 3.0
11495
50 0.875 25 3.0
11495
50 0.800 30 3.0
132-14SM_L_14
132-15SM_L_15
132-16SM_L_16
132-17SM_L_17
132-18SM_L_18
222
246
307
380
422
5,2
5,2
5,2
5,2
5,2
11092
11495
11495
11495
11495
50
50
50
50
50
0.730
0.685
0.660
0.590
0.540
35
35
35
50
60
132-19SM_L_19
132-20SM_L_20
491
538
5,2
5,2
11495
10487
50
50
0.535
0.490
65 2.0
90 2.0
1. When ordering, specify tolerance, termination and packaging codes:
132-20SMGLD
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Tolerance: G=2% J = 5%
Packaging:D = 13″ machine-ready reel. EIA-481 embossed plastic tape
(800 parts per full reel).
B = Less than full reel. In tape, but not machine-ready. To
have a leader and trailer added ($25 charge), use code
letter D instead.
3.0
3.0
3.0
2.5
2.5
2. Inductance and Q tested at 50 MHz on an Agilent/HP 4291A with a
16193 fixture and correlation.
3. Tolerances in bold are stocked for immediate shipment.
4. SRF tested on the Agilent/HP 8753D and a Coilcraft CCF1248 test
fixture.
5. DCR tested on the Cambridge Technology Model 510 Micro Ohmmeter.
6. Current that causes a 15°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 185-1 Revised 01/11/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 185-2
Designer’s Kit C319 contains 8 each of all 5% values.
Designer’s Kit C319-2 contains 8 each of all 2% values.
Maxi Spring™ Air Core Inductors
Typical L vs Frequency
Typical Q vs Frequency
1000
250
900
200
90 nH
422 nH
700
600
500
Q factor
Inductance (nH)
800
246 nH
400
169 nH
150
169 nH
246 nH
422 nH
100
300
90 nH
200
50
100
0
10
1
0
1000
100
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Typical Irms Derating
120
110
90
80
70
60
50
40
30
25°C
Percent of rated Irms
100
20
10
0
-40
-20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
A
E
D
Recommended
Land Pattern
C
Strip
Length
B
A max
B max
C max
D
E
0.415
10,55
0.260
6,60
0.235
5,97
0.240 ±0.015
6,10 ±0,38
0.314 ±0.020
7,98 ±0,51
0.095
2,42
0.080
2,04
0.185
4,70
135°
max
0.314
7,98
0° min
Dimensions are in
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 185-2 Revised 01/11/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.