COILCRAFT AE336RAD27N_SZ

0805 CHIP INDUCTORS
Outgassing Compliant Chip Inductors AE336RAD
The AE336RAD inductors provide exceptional Q values,
even at high frequencies. They have a ceramic body and
wire wound construction to provide the highest SRFs,
tight inductance tolerance and batch consistency.
This robust version of Coilcraft’s standard 0805HQ series
features high temperature materials that pass NASA low
outgassing specifications and allow operation in ambient temperatures up to 155°C. The leach-resistant base
metalization with tin-lead (Sn-Pb) terminations ensures
the best possible board adhesion.
Inductance2
Percent SRF min4
DCR max5
Imax
(nH)tolerance
Q min3
(GHz) (Ohms)(A)
Part number1
AE336RAD2N5JSZ
AE336RAD5N6JSZ
AE336RAD6N2JSZ
AE336RAD12NJSZ
AE336RAD16N_SZ
AE336RAD18N_SZ
AE336RAD20N_SZ
AE336RAD27N_SZ
AE336RAD30N_SZ
AE336RAD39N_SZ
AE336RAD48N_SZ
AE336RAD51N_SZ
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 250 MHz
[email protected] 200 MHz
[email protected] 200 MHz
5
5
5
5
5,2
5,2
5,2
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
1. When ordering, please specify tolerance and testing codes:
AE336RAD51NGSZ
Tolerance: F =1% G = 2% J = 5%
Testing:Z =COTS
H=Screening per Coilcraft CP‑SA‑10001
N
=Screening per Coilcraft CP‑SA‑10003
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286 impedance analyzer or equivalent with Coilcraft-provided correlation pieces.
3. Q measured at the same frequency as inductance using an Agilent/HP
4291A with an Agilent/HP 16197 test fixture or equivalents.
4. SRF measured using an Agilent/HP 8753ES network analyzer or
equivalent and a Coilcraft SMD-D test fixture.
5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a
Coilcraft CCF858 test fixture.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
®
© Coilcraft, Inc. 2012
56 @ 1000 MHz
83 @ 1000 MHz
80 @ 1000 MHz
52 @ 500 MHz
72 @ 500 MHz
70 @ 500 MHz
54 @ 250 MHz
58 @ 250 MHz
50 @ 250 MHz
53 @ 250 MHz
44 @ 150 MHz
36 @ 150 MHz
>5.00
4.88
4.55
2.80
2.40
2.20
2.05
2.00
1.74
1.60
1.40
1.28
2.0
1.9
1.8
1.6
1.4
1.4
1.4
1.3
1.1
1.0
1.1
0.9
Core material Ceramic
Terminations Tin-lead (63/37) over silver-platinum-glass frit
Ambient temperature –55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 2000 per 7″ reel
Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing,
1.65 mm pocket depth
Parts shown are preproduction products available for evaluation only.
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
0.020
0.035
0.035
0.045
0.060
0.060
0.060
0.070
0.095
0.110
0.095
0.120
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
Document AE197-1 Revised 11/06/12
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
0805 CHIP INDUCTORS
AE336RAD Series (0805)
Typical Q vs Frequency
Typical L vs Frequency
70
140
6.2 nH
16 nH
120
48 nH
60
2.5 nH
80
Inductance (nH)
Q Factor
100
20 nH
30 nH
60
48 nH
40
50
20
10
0
0
100
1000
5000
20 nH
30
20
10
30 nH
40
16 nH
6.2 nH
2.5 nH
10
1
Frequency (MHz)
Irms Derating
B
overall
120
A
90
80
E
terminal
70
60
30
1000
5000
H
Pick and
place
material
I
G
J
F
I
D
Terminal wraparound:
approx 0.015/0,38 both ends
Suggested
Recommended
LandPattern
Pattern
Land
ABCD
maxmaxmax ref E F G H IJ
0.0900.0680.0600.0200.0500.0200.0400.0700.0400.030inches
2,291,731,520,511,270,511,021,781,020,76
mm
50
25°C
Percent of rated Irms
100
20
Note: Dimensions are before solder application. For maximum overall
dimensions including solder, add 0.0025 in / 0,064 mm to B and
0.006 in / 0,15 mm to A and C.
10
0
-55 -40
C
F
110
40
100
Frequency (MHz)
-20
0
20
40
60
80
100
120
140 160
Ambient temperature (°C)
®
© Coilcraft, Inc. 2012
Parts shown are preproduction products available for evaluation only.
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
Document AE197-2 Revised 11/06/12
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.