AIR CORE INDUCTORS 200°C Air Core Inductors AT439RAT AT470RAT ■Special materials allow operation in ambient temperatures as low as –60°C and up to 200°C. ■Passes NASA low outgassing specifications ■Tin-lead (Sn-Pb) terminations ensures the best possible board adhesion Terminations Tin-lead (63/37) over copper Ambient temperature –60°C to +150°C with Imax current, +150°C to +200°C with derated current Storage temperature Component: –60°C to +200°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging AT439RAT: 700/7″ reel Plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth AT470RAT: 500/7″ reel Plastic tape: 16 mm wide, 0.28 mm thick, 8 mm pocket spacing, 3.4 mm pocket depth PCB washing Only pure water or alcohol recommended SRFDCR L2 Percent Q3 min4 max5 Imax Weight Part number1 Turns(nH) tol min (GHz)(mOhm) (A) (mg) AT439RAT2N5KSZ 12.510 14512.5 1.1 4 31 AT439RAT5N0_SZ 25.05,2 1406.5 1.8 4 42 AT439RAT8N0_SZ 38.05,2 1405.0 2.6 4 52 AT439RAT13N_SZ 412.5 5,2 1373.3 3.4 4 65 AT439RAT19N_SZ 518.5 5,2 1322.5 3.9 4 78 AT470RAT18N_SZ 617.5 5,2 1002.2 4.5 4 100 AT470RAT22N_SZ 722.0 5,2 1022.1 5.2 4 110 AT470RAT28N_SZ 828.0 5,2 1051.8 6.0 4 118 AT470RAT36N_SZ 935.5 5,2 1121.5 6.8 4 133 AT470RAT43N_SZ 1043.0 5,2 1061.2 7.9 4 147 1. When ordering, please specify tolerance and testing codes: AT470RAT43NGSZ Tolerance: G =2% J = 5% Testing:Z =COTS H =Screening per Coilcraft CP-SA-10001 N =Screening per Coilcraft CP-SA-10003 2. Inductance measured at 150 MHz on an Agilent/HP 4286A or equivalent with a Coilcraft SMD-A test fixture and correlation. 3. Q measured at 150 MHz on an Agilent/HP 4291A or equivalent with a 16193A test fixture or equivalent. 4. SRF measured on an Agilent/HP 8753ES network analyzer or equivalent with a Coilcraft CCF1268 test fixture. Parts with SRF >5 GHz are verified to >5 GHz in screening 5. DCR measured on a Keithley 580 Micro-Ohmmeter or equivalent. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Dimensions are in ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 inches mm Document AT107-1 Revised 09/08/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com AIR CORE INDUCTORS AT439RAT / AT470RAT Air Core Inductors L vs Frequency – AT439RAT L vs Frequency – AT470RAT 25 60 43.0 nH 55 50 18.5 nH Inductance (nH) Inductance (nH) 20 15 12.5 nH 10 8.0 nH 5.0 nH 5 100 35.5 nH 40 35 28.0 nH 30 22.0 nH 25 20 2.5 nH 0 45 17.5 nH 15 200 400 600 10 1000 100 Frequency (MHz) Q vs Frequency – AT439RAT 600 1000 135 210 130 2.5 nH 125 200 17.5 nH 120 5.0 nH 180 170 8.0 nH 160 Q factor 190 Q factor 400 Q vs Frequency – AT470RAT 220 22.0 nH 115 28.0 nH 35.5 nH 110 105 12.5 nH 43.0 nH 100 150 140 130 200 Frequency (MHz) 95 18.5 nH 100 200 400 600 1000 90 100 Frequency (MHz) 200 400 600 1000 Frequency (MHz) Typical Current Derating 120 110 90 80 70 60 50 40 30 25°C Percent of rated Irms 100 20 10 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 200 Ambient temperature (°C) ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 Document AT107-2 Revised 09/08/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com