resistors CN-KRT anti sulfuration chip networks (convex termination) EU features •Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material •More advancement in the mounting density than individual chip resistors •Mounting cost reduction by decreasing the number of parts mounting times •Easy soldering fillet inspection •Suitable for an image recognition mounter due to square corner design •Marking: Black body color •Products with lead-free termination meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. dimensions and construction a2 a L p b CN1E2KRT (0402x2) CN1E4KRT (0402x4) W C t d Protective Outer Coating Electrode Resistive Film Ceramic Substrate Type Dimensions inches (mm) d t a a2 b P* — .007±.002 (0.17±0.05) .026 (0.67) .079±.004 .039±.004 .006±.004 .010±.008 .014±.004 .012±.006 .016±.006 .006±.004 (2.0±0.1) (1.0±0.1) (0.15±0.1) (0.25±0.2) (0.35±0.1) (0.3±0.15) (0.4±0.15) (0.15±0.1) .020 (0.5) L W c .039±.004 .039±.004 .006±.004 .010±.004 .014±.004 .013±.004 (1.0±0.1) (1.0±0.1) (0.15±0.1) (0.25±0.1) (0.35±0.1) (0.33±0.1) ` * Referential values. Inner Electrode ordering information CN 1E 4 K RT TD 103 J Type Size Number of Resistors Terminal Convex Termination Material Packaging Nominal Resistance Tolerance 2 4 K: Convex type with squared corners RT: Sn 3 digits J: ±5% 1E TD: Paper applications and ratings Part Desigation CN1E2KRT CN1E4KRT Power Rating w/ Element 0.063 Resistance Range J: ±5 E24 T.C.R. (×10−6/K) 3~1M ±200: R≥10Ω ±400: R<10Ω Max. Working Voltage Max. Overload Voltage Rated Ambient Temperature Operating Temperature Range Taping & Q'ty/Reel (pcs) 25V 50V +70°C −55°C~+125°C 10,000 TD Please note that network resistors generate higher heat rather than single flat chip resistor even under rated power output. Rated voltage = √ Power Rating × Resistance value or Max. working voltage, whichever is lower. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 72 1/05/13 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com anti sulfuration chip networks (convex termination) environmental applications Circuit Construction R R1 CN1E4KRT R2 R1 R1 =R2 R1 R2 R2 100 R3 R4 R1 =R2 =R3 =R4 R3 R4 R1 R2 R3 R4 あ1 R5 R6 R7 あ1 R8 R2 R3 R4 R5 R6 R7 R8 80 60 40 20 0 -60 -40 -20 -55 80 100 120 140 70 125 Ambient Temperature (°C) For resistors operated at an ambient temperature of 70°C or above, a power rating shall be derated in accordance with the above derating curve. あ1 R1 % Rated Power CN1E2KRT Derating Curve R2 1 あ1 0 20 40 60 Performance Characteristics Parameters Resistance Performance Requirements ∆R±% Limit Typical Within specified tolerance Within specified T.C.R. 2 Test Methods — 25°C — 0.25 +25°C/−55°C and +25°C/+125°C Rated voltage × 2.5 for 5s 1 0.75 260°C±5°C, 10s±1s 1 0.5 −55°C (30min.)/+125°C (30min.) 5 cycles Moisture Resistance 5 1 Endurance at 70°C 5 0.5 High Temperature Exposure 1 0.15 T.C.R. Overload (Short time) Resistance to Soldering Heat Rapid Change of Temperature 40°C ±2°C, 90%~95%RH, 1000h 1.5h ON/0.5h OFF cycle 70°C±2°C, 1000h 1.5h ON/0.5h OFF cycle +125°C, 1000h Circuit Board Application Vcc あ1 IC IC あ1 Vcc Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/17/12 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com あ1 IC IC あ1 73 resistors CN-KRT