Catalog 1308242 Issued 3-03 P&B General Purpose Relays PCB Relays series T73 series switching capacity File E29244 File LR48471 e E29244 nUL Class F coil insulation system standard e LR48471 n1 Potter & Brumfield Low Profile, 10 Amp Miniature PCB Relay T73 Printed Circuit Board Relay Profile, 10 Amp ed Circuit d Relay n10A P&B form A (NO) and 1 form C (CO) contact arrangement uld thoroughlynreview technical before selecting a product part Flux the proof, washdata tight plastic sealed case available is recommended that user also seek out the pertinent approvals files of es/laboratories and review them to ensure the product meets the nts for a given application. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. ta @ 20°C Coil Data @ 20°C Features Features 3 to 48VDC. • 10 amp switching capacity. Power: 450 milliwatts. • UL Class F (155°C) coil insulation system standard. 660 milliwatts for A 48VDC • 1 Form and 1 coil. Form C contact arrangements. Typical perature Rise: 35C° max, rated coilappliances, voltage. HVAC and security. • applications Ideal foratdomestic Power: 130% of•nominal. Resists high temperature Appliances, HVAC, office machinesand various chemical solutions. le: Continuous. • Immersion cleanable, plastic sealed case available. Voltage: 3 to 48VDC. • 10 amp switching capacity. Nominal Power: 450 • ULmilliwatts. Class F (155°C) coil insulation system standard. 660 for148VDC • 1 milliwatts Form A and Form Ccoil. contact arrangements. Coil Temperature Rise: max, at rated coil voltage. • Ideal35C° for domestic appliances, HVAC and security. Max. Coil Power: 130% of nominal. • Resists high temperature and various chemical solutions. Duty Cycle: Continuous. • Immersion cleanable, plastic sealed case available. a @ 20°C Coil Data @ 20°C Coil ge ) Contact Data @ 20°C Coil Must Operate Mustand Release Arrangements: 1 Form A (SPST-NO) 1 Form C (SPDT). Resistance Voltage Voltage (VDC) Material: Silver-cadmium oxide. Approvals (Ohms) +10% (VDC) Coil Rated Coil Voltage Data (continued) (VDC) Contact Data @ 20°C U Coil Must Operate Must Release Arrangements: 1 Form AVoltage (SPST-NO) and 1Voltage Form C (SPDT) Resistance Material: Silver-cadmium(VDC) oxide. (Ohms) +10% (VDC) Max. Switching Rate: 240 ops./min. (no load). Max. Switching Rate: 240 ops./min. (no load). UL E29244 3 20 1.95 0.15 20 1.9530 ops./min. (rated 0.15 load). 30 ops./min. (rated load). Technical data of approved types3.25 on request 0.25 Coil versions, DC coil 5 56 Mechanical Life:3.25 0.25 56 Expected Mechanical Life: 10 million operations. Expected 10 million operations. Coil Rated Operate Coil Rated coil0.30 6 80 Release 3.90 80 0.30 Expected Electrical3.90 Life: 100,000 operations. Expected Electrical Life: 100,000 operations. 9 180 voltage 5.85 180 5.85@ 5VDC 0.45 Contact Data code voltage voltage power 0.45 Minimum Load: 10mA Minimum Load: 10mAresistance @ 5VDC 12 320 VDC 7.80 0.60 320arrangement 7.80 0.60 Contact 1 form VDC VDC Ω±10% mW max. Initial Contact Resistance: 100 milliohms max.A@(NO) 100mA, 6VDC. Initial Contact Resistance: 100 milliohms @ 100mA 18 11.7 11.7 0.90 Rated720 voltage 120VAC, 24VDC 003 3 1.95 720 0.15 20 450 0.90 24 1,150 15.6 1.20 1,150 15.6 1.20 Max. switching voltage 120VAC, 28VDC 5 3.25 0.25@ 20°C55.5 450 Contact Ratings @ 20°C with relay2.40 properly vented. Remove vent 005 Contact Ratings with relay properly 48 3,500 31.2 2.40vented. 3,500 31.2 Ratednib current 10A 006 6 3.9 after soldering 0.3 80 450 after soldering and cleaning. nib and cleaning. ContactContact material AgCdO 9 5.85 0.45 180 450 Typical Ratings Type Operations 009 Contact Typical Ratings Type Min. recommended contact load 100mA at 5VDC 012 12 7.8 0.6 320 450 Arrang. Arrang. Frequency of operation 1800 ops./h 018 18 11.7 0.9 720 450 Operate Data @ 20°C e Data @ 20°C 1 & 5 1/3HP NO @ 240VAC Motor 30,000 1& 5 1/3HP NO @ 240VAC time max. 10/5ms 024 Operate 24Time: 10 ms 15.6 1.2 1280 450 Motor (excluding bounce). Time: 10 msOperate/release (excluding bounce). 10A NO @ 120VAC Resistive 100,000 10A NO @ 120VAC Resistive Electrical endurance 048 48 31.2 2.4 3491 660 Release Time: 5 ms (excluding bounce). ime: 5 ms (excluding bounce). 6A NO @ 120VAC Resistive 100,000 6A NO @ 120VAC Resistive 3 ops. All figures are given for coil without pre-energization, at ambient temperature +23°C. 10A, 120VAC resistive 100x10 6A NO @ 24VDC Resistive 100,000 6A NO @ 24VDC Resistive 3 ops. 6A, 24VDC resistive10A/5A 100x10@ 120VAC Resistive 100,000 10A/5A @ 120VAC Resistive Environmental Data mental Data Contact ratings Insulation Data 1/4HP NO @ 120VAC 10A, 120VAC Motorresistive 1/4HP NO @ 120VAC Motor Temperature Range: ture Range: 6A, 24VDC resistive Initial dielectric strength Consult factory for other ratings. -40°C to +130°C. ge: -40°C to +130°C. Consult factory for other ratings. 3/4HP, 240VAC between Storage: open contacts 750Vrms to +80°C. ting: -30°C to +80°C. endurance, DC coil Mechanical 10x106 operations between Operating: contact and-30°C coil 2000Vrms Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude , Mechanical: 10 to 55 Hz., 1.5mm double amplitude Clearance/creepage Operational: 10 to 55 Hz., 1.5mm double amplitude. Operational: 10 to 55 Hz., 1.5mm double amplitude. between contact and coil Initial Dielectric Strength Dielectric>1.6/3.2mm Strength Shock, Mechanical:Initial 100g min. echanical: 100g min. Coil Data Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Operational: 10g min.Open Contacts: 750VAC 50/60 Hz. (1 minute). perational: 10g min. voltage range 3 to 48VDC Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute). Between CoilRH. and Contacts: 2,000VAC 50/60 Hz. (1 minut Operating Humidity: 45 to 85% g Humidity:Coil 45 to 85% RH. Operative range, IEC 61810 2 Coil insulation system according UL Class F Mechanical Data Initial Termination: Printed circuitInsulation terminals. Resistance Initial Insulation Resistance ion: Printed circuit terminals. Between Mutually Insulated Elements: 108 ohms min. @ 500VDC. e (94V-0 Flammability Ratings): Ag contact rating. 0.42 oz. (12g). 100 60 28VDC Resistive 10 40 Time (msec) Temp. Rise (Deg.) 50 Operation (x 104) Operate time Operate Time 120VAC Resistive 30 20 0.8 s only. 1 0 100 60 10 50 8 Operate Time 6 4 2 10 e Life Expectancy Figure 1 - Coil Temperature Rise Coil temperature rise 12 0.2 40.3 0.4 6 0.5 8 0.6 100.7 0.8 12 0.2 0.3 Coil Power Contact Current (A) (W) 0.4 0.5 0.6 0.7 0.8 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 120VAC Resistive 3010 20 8 6 4 2 1 0 4 0.4 0.2 20.3 80.7 0.5 6 0.6 10 0.8 12 Contact Current Coil Power (W) (A) Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Technical support: (millimeters) unless otherwise Refer to inside back specified. cover. 10 40 Coil Power (W) Note: Graphical data should not be used as a substitute for specific application verification. be used for estimates only.for Dimensions are shown Dimensions are in inches over www.tycoelectronics.com ecifications andTo availability bject to change. 430 reference purposes only. 28VDC Resistive 10 Release Time 2 12 Time (msec) Figure 1 - Life Coil Expectancy Temperature Rise Electrical endurance Between Mutually Insulated Elements: 108 ohms min. @ Enclosure (94V-0 Flammability Ratings): Ag contact rating Weight: 0.42 oz. (12g). Temp. Rise (Deg.) Operation (x 104) nical Data Note: Graphical data should not be used as a substitute for specific applic Specifications and availabilityare shown for Dimensions subject to430 change. reference purposes only. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions www.tycoelectronics.com Dimensions are in in Technical support: (millimeters) unless o Refer to inside back cover. specified. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Ordering Information .877 (22.3) .693 (17.6) ore likely to maintain the following items in stock for immediate delivery. Typical Part Number 1. Basic Series: .610 .067 (1.7) T73 = Miniature, printed circuit board relay. (15.5) General Purpose Relays 2. PCB Relays 24 = 24VDC 48 = 48VDC .693 .122 (3.1) Enclosure: V = Vented (Flux-tight)* Wiring Diagrams (Bottom Views) S = Immersion cleanable, plastic sealed case. Potter & Brumfield 3. Contact 1 Form A .067 Arrangement: (1.7) Miniature PCB Relay T731 =(Continued) 1 Form A (SPST-NO). (17.6) B T73 0.30 (7.62 .122 (3.1) 5 = 1 Form C (SPDT) 2 re likely to maintain the following items in stock for immediate delivery. 4. Coil Input: Wiring Diagrams (Bottom Views) D = DC voltage. 1 Form A Terminal assignment 5. Relay Bottom viewType: on solder pins 3 4 5 1 = Standard coil. Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at 0.30 www.te.com/customersupport/rohssupportcenter (7.62 Ambient temperature -30°C to +80°C .693 Category of environmental protection (17.6) IEC 61810 RTII - flux proof Suggested PC Board Layouts Views) RTIII(Bottom - wash tight 1 Form A Shock resistance (functional) 10g .700 Shock resistance (destructive) 100g .200 (17.8) Weight 12g (5.08) 2 x .051 DIA. Resistance to soldering heat THT (1.3) IEC 60068-2-20 RTII: 270°C/10s 0.30 RTIII: 260°C/5s .300 (7.62 Packaging unit tube/20 pcs., carton box/1000 pcs. (7.62) Sug 1 Fo .3 (7 Contact 1 6. form A (NO) Material: 2 5 = Silver-Cadmium Oxide 7. Coil Voltage: Form C 03 = 3VDC 1 06 = 46VDC 125 = 12VDC 24 = 24VDC 3 05 = 5VDC 09 = 9VDC 18 = 18VDC 48 = 48VDC .3 1 Fo (7. 1 cleaning process. * Not suitable for immersion 1 form C (CO) 2 .500 1 Fo 1 Form C (12.7) Our authorized distributors are more likely to maintain the followin T73S5D15-05 T73S5D15-12 T73S5D15-24 3 1 4 5 2 Suggested PC 2 xBoard .039 DIA.Layouts (Bottom Views) PCB layout 1 Form A Bottom view on solder pins .200 (5.08) .200 (5.08) .500 (12.7) Dimensions Outline Dimensions (1.0) .700 (17.8) .700 1 Form C 1 form A (NO) 3 4 Dimensions are shown for .877 reference purposes only. (17.8) 5 Dimensions are in inches over .693 (millimeters) unless otherwise specified. (17.6) (22.3) 2 x .051 DIA. (1.3) 3 x .051 DIA. (1.3) .500.300 (7.62) (12.7) .300 (7.62) Sug 1 Fo 0.30 (7.62 .610 (15.5) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 2 x .039 DIA. 2(1.0) x .039 DIA. 1 form C (CO) (1.0) 1 Form C .200 (5.08) ensions are in inches over limeters) unless otherwise cified. .700 (17.8) .067 (1.7) Specifications and availability subject to change. .500 (12.7) .300 (7.62) 3 x .051 DIA. (1.3) .122 (3.1) 0.30 (7.62 www.tycoelectronics.com Technical support: 431 Refer to inside back cover. Wiring Diagrams (Bottom Views) Su 1 Form A 1F 2 x .039 DIA. (1.0) 2 ensions are in inches over imeters) unless otherwise ified. Specifications and availability Product code structure subject to change. www.tycoelectronics.com Typical product Technical support: 431 Refer to inside back cover. 3 Basic type T73 Miniature PCB Relay T73 Category of protection V Flux proof S Wash tight, immersion cleanable, plastic sealed case Contact arrangement 1 1 form A (NO) contact 5 1 form C (CO) contact Coil input D DC coil Relay type 1 Standard coil Contact material 5 AgCdO Coil voltage Coil code: please refer to coil versions table (e.g. 05=5VDC) 2 Enclosure Arrangement 4 T73 S Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. D 1 5 -24 . ( 1F 1 2 .500 (12.7 3 Coil 4 5 Cont.material T73S1D15-12 Wash tight 1 form A (NO) DC coil AgCdO Dimensions are shown for T73S5D15-05 1 form C (CO) reference purposes only. T73S5D15-12 T73S5D15-24 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 5 5 1 Form C Other types on request Product code code Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Coil voltage Part number 12VDC 1-1393197-1 Dimensions are in inches over 5VDC 2-1393197-9 (millimeters) unless otherwise 12VDC 3-1393197-2 specified. 24VDC 3-1393197-4 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.