MACOM 640559

MTA, CST-100 II, SL-156 and
AMP Economy Power
(EP) Connectors
NOT the LATEST
REVISION
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Table of Contents
Introduction
This catalog has been designed
to assist you, our customer, identify products to satisfy your connector needs for printed circuit
board headers, mass termination
connectors preloaded with contacts, crimp-snap contacts and
housings, and card edge connectors with preloaded contacts.
The list at right identifies by
centerline the types of product
available and is meant to be of
assistance to you in the product
selection process.
IDC
MTA-50
IDC
MTA-100
Crimp
CST-100 II
IDC
MTA-156
© 1977, 1978, 1979, 1980, 1983, 1986,
1988, 1992, 1993, 1994, 1995, 1999,
2000, 2001, 2002, 2003 and 2005 by
Tyco Electronics Corporation.
All International Rights Reserved.
AMP, AMP-O-LECTRIC, AMP-O-MATIC,
AMPOMATOR, CERTI-CRIMP,
PRO-CRIMPER, MADISON CABLE and
TYCO are trademarks.
TEFLON is a trademark of E.I. DuPont
De Nemours and Company.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
Introduction and Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 3
Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
.050 [1.27] Centerline Connectors
MTA-50 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-10
Introduction and Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
IDC Connector Kits (Feed-Thru and Closed End)
Ribbon Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 6
Discrete Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 8
Through-Hole Header Assemblies
Vertical and Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Surface Mount Header Assemblies
Vertical and Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
.100 [2.54] Centerline Connectors
MTA-100 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-31
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 13
Connectors — UL94V-2 and UL94V-0
Closed End with and without Polarizing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15
Feed-Thru with and without Polarizing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
LED Closed End and Feed-Thru — UL94V-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 17
Posted Connectors Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 19
MTA-100 Posted Connectors (Wire-to-Wire) UL94V-2
Closed End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Feed-Thru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Headers — UL94V-0
Flat — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Narrow Flat — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Polarized — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Friction Lock — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Headers with Retention Peg — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
High Profile Headers — Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Polarized — High Temperature, Straight and Right-Angle Posts . . . . . . . . . . . . . . . . .27
Friction Lock — High Temperature, Straight and Right-Angle Posts . . . . . . . . . . . . . .28
Polarized — Surface Mount, Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Friction Lock — Surface Mount, Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Shrouded — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
CST-100 II Crimp Contacts, Housings and Shrouded Headers . . . . . . . . . . . . . . . . . . . . . . . . .31, 32
.156 [3.96] Centerline Connectors
MTA-156 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-57
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34, 35
Connectors — UL94V-2 and UL94V-0
Closed End with Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . .36, 37
Closed End without Locking Ramp, with and without Polarizing Tabs . . . . . . . . .36, 37
Feed-Thru with Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . . . .38, 39
Feed-Thru without Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . .38, 39
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-42
Posted Connectors Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44
MTA-156 Posted Connectors (Wire-to-Wire) — UL94V-2
Closed End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Feed-Thru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
MTA-156 Headers — UL94V-0
Flat — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Flat — Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Friction Lock — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Friction Lock — Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Polarized Lock — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Polarized Lock — Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Friction Lock — High Temperature, Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Shrouded — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
MTA-156 Quad Connectors — UL94V-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54, 55
Closed End with Locking Ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Feed-Thru with Locking Ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
2
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Table of Contents (Continued)
Crimp
SL-156
Crimp
AMP EP Connectors
Need more information?
Call Technical Support at the
numbers listed below.
Technical Support is staffed
with specialists well versed
in Tyco Electronics products.
They can provide you with:
■ Technical support
■ Catalogs
■ Technical Documents
■ Product Samples
■ Authorized Distributor
Locations
MTA-156 Card Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56, 57
Connectors — UL94V-0
Closed End with and without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Feed-Thru with and without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
SL-156 Crimp Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58-62
Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Wire-to-Board Crimp Contacts and Keying Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Wire-to-Board Housings — UL94V-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Housings with Through Board Latch — UL94V-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Housings and Contacts for Large Insulation Diameter (LID) Wire . . . . . . . . . . . . . . . . . .62
AMP Economy Power (EP) Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63-69
.156 [3.96] Centerline Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Plug Housings, Low-Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Low-Profile Headers — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . .65
Low-Profile Headers, High Temp. — Straight and Right-Angle Posts . . . . . . . . . . . . . . .66
.200 [5.08] Centerline Connectors
Plug Housings and Straight and Right-Angle Post Headers . . . . . . . . . . . . . . . . . . . . . .67
.312 [7.92] Centerline Connectors
Low-Profile Headers — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Single Connectors
1-Position Plug Housing and High-Profile Header — Straight Post . . . . . . . . . . . . . . . . .69
MTA Wire Selection and Ribbon Cable Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
IDC Ribbon Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-74
MTA Wire Termination Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
MTA Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76-79
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80-82
Global Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Connector Selection Guide
Product Name
.050" Centerline
MTA-50 IDC Connector
Kits and Headers
.100" Centerline
MTA-100 Connectors
and Headers
CST-100 II Contacts
and Housings
.156" Centerline
MTA-156 Connectors
and Headers
Contact Wire-toCenter- TerminNo. of
Wire
line
ation
Option Positions
.050
1.27
.100
2.54
.100
2.54
Quad Connectors
.156
3.96
.156
3.96
SL-156 Contacts
and Housings
.156
3.96
SL-156 Large Ins. Dia. (LID) .156
Contacts and Housings
3.96
.156", .200" and .312" Centerlines
.156
3.96
AMP Economy Power
.200
(EP) Connector System
5.08
.312
7.92
Wire
Wire
Size Insulation
(AWG) Dia. Max.
IDC
Planned
2–28
30–26
IDC
Yes
2–28
28–22
2–28
26–22
Crimp Planned
IDC
Yes
2–24
26–18
IDC
No
2–12
22–18
Crimp
No
Crimp
No
2–24
24–16
Crimp
No
1–12
22–18
Crimp
No
2–12
22–18
Crimp
No
2–5
22–18
1–24; 2–10
w/ through 24–18
board latch
Current
Rating
(A)**
.039*
0.99
.060*
1.52
.065
1.65
Voltage
Operating
ReplaceUL
Rating
Temp.
ment
Flammability
Max. (VAC) Range (°C)
Contacts
1
30
–55 to +105 V-0 & V-2
No
5
250
–55 to +105 V-0 & V-2
Yes
4
250
–55 to +105
Yes
V-0
.095*
2.41
.095*
2.41
7
600
–55 to +105 V-0 & V-2
Yes
12.5
600
–55 to +105
V-0
Yes
.105
2.67
10
250
–25 to +105
V-0
Yes
.112
2.84
10
250
–25 to +105
V-0
Yes
8 (1 pos.)
7.5 (2–12 Pos.)
250
–25 to +105
V-0
Yes
7.5 (2–12 Pos.)
250
–25 to +105
V-0
Yes
7.5 (2–5 Pos.)
250
–25 to +105
V-0
Yes
.118
3.00
.118
3.00
.118
3.00
Approvals
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
** When terminated one position at a time.
** Current Rating is application dependent.
3
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers
Product Facts
■
■
■
■
■
■
.503
[12.78]
or
.254
[6.45]
■
Max.
Vertical
Max.
Right-Angle
Component Recognized by
Underwriters Laboratories
Inc. to US and Canadian
Standards,
File No. E28476
(Connectors and Headers)
File No. E53793
(Ribbon Cable)
These matrixes have been
prepared to assist you in
defining the correct mating
halves for the MTA-50 header
and connector kit combination. Where a “Y” is indicated
the combination is a valid
mating pair.
Note: Tyco Electronics does NOT recommend intermating connectors and
headers with different contact platings.
The MTA-50 IDC Connector
System is a wire-to-printed circuit board system with contacts in a staggered, single
row on .050 [1.27] centerline.
The design features wire feedthrough capability for daisychain applications. Insulation
displacement contacts are
used to terminate a wide
range of conductor sizes.
Ribbon cable can also be terminated when the appropriate
receptacle assembly and
strain relief cover are used.
Header assemblies for board
mount applications include
right-angle (horizontal) and
vertical mount products.
These are available in
through-hole and surface
mount configurations.
Typical uses of the MTA-50
IDC connectors would be in
the Appliance, Commercial
and Home Equipment and
Security products industries.
See the following pages for
related products:
■ Ribbon Cable (reels), .050
[1.27] centerline (p. 71)
■ Application Tooling (p. 76)
■ Cable Assemblies (p. 74)
Performance Data
Voltage Rating — 30 VAC
Current Rating — 1 amp max.
Low-Level Resistance —
30 milliohms
Dielectric Withstanding Voltage —
500 VAC
Insulation Resistance —
1,000 megohms
Operating Temperature —
–55°C to +105°C for connector only;
cable rating may be lower
Technical Documents
Application Specification —
114-13072 MTA-50 Connectors
Product Specifications —
108-2113 MTA-50 Connectors
100-4703 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
PVC insulation)
100-6257 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
TPO insulation)
MTA-50 IDC Connector Kit / Header Mateability Guide
Headers
Headers
1445341
1445344
1445347
1445350
1445353
1445356
1445359
1445362
1445365
1445368
1445371
1445374
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Matrix for Tin Plated
Part Numbers
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Headers
1445343
1445346
1445349
1445352
1445355
1445358
1445361
1445364
1445367
1445370
1445373
1445376
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Matrix for .000030 [0.00076]
Gold Plated Part Numbers
1445
123
1445
124
1445
170
1445
173
■
Connector Kits
■
1445
125
1445
126
1445
171
1445
174
■
Connector Kits
■
2–28 contact positions
Connectors terminate 26,
28 and 30 AWG discrete wire
or .050 [1.27] centerline ribbon cable
Color-coded housings
Maximum cable insulation
diameter of .039 [0.99] with
PVC insulation only
IDC contacts pre-loaded in
receptacle housing
30 V, 1 A contact rating
Contact design allows for
gold-to-gold or tin-to-tin
interface
Contacts are lubricated to
prevent fretting corrosion
Wire feed-thru capability for
daisy-chain wiring or closed
end for point-to-point wiring
Connectors are polarized for
proper mating
Manual and semiautomatic
application tooling
Mating heights shown below:
1445
120
1445
121
1445
169
1445
172
■
Connector Kits
MTA-50
.050 [1.27]
■
1445342
1445345
1445348
1445351
1445354
1445357
1445360
1445363
1445366
1445369
1445372
1445375
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Matrix for .000015 [0.00038]
Gold Plated Part Numbers
4
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
Feed-Thru and Closed End
Connectors
Receptacle Assemblies — Ribbon Cable
MTA-50
.050 [1.27]
± .004
A
[± 0.10]
(See Note 1)
.315 ± .006
[8.00 ± 0.15]
.150
[3.81]
Material and Finish
Housing — UL 94V-2 rated, thermoplastic
Contacts — Phosphor bronze;
.000100 [0.00254] min. tin in wire
termination area, over .000050 [0.00127]
min. nickel; choice on mating end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
Position 1
.050
Ref.
[1.27]
.035
Ref.
[0.89]
.190 ± .003
[4.83 ± 0.08]
.100 ± .003
[2.54 ± 0.08]
Notes:
1. To determine connector overall
length (dim. A), multiply .050 x the
number of circuits and add .082.
Example: .050 x 10 circuits
equals 0.50 + .082 = .582 [14.78].
Color Coding by Wire Size for
UL94V-0 Connectors
2. Strain relief covers shown on
page 6 are required and sold as
part of the Connector Kit.
26 AWG — Blue
28 AWG — Green
30 AWG — Brown
3. Stranded UL Style 1061 or equivalent wire is recommended.
For Strain Relief Covers see
page 6.
For mating Headers see
pages 9 and 10.
For Mateability Guide, see
matrixes on page 4.
4. Unless otherwise stated all tolerances (except plating) to be ±.005
[±0.13].
5. Consult Product Drawing for
RoHS Compliant information.
Connector Kits — Ribbon Cable
Base Part Numbers
Connector Kit Ordering
Information
Connector Kit consists of
Receptacle Assembly and
Strain Relief Cover.
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part number 1445359
2 position = 0-1445359-2
and
28 position = 2-1445359-8
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
Connector
Type &
Wire Size
Feed-Thru
Connector Kit
No. of
Part Nos.
Circuits
Tin Plated
26 AWG
1445359
0.12–0.15 mm2
28 AWG
1445362
0.08–0.09 mm2
30 AWG
1445365
0.05–0.06 mm2
.000030 [0.00076] Gold Plated
26 AWG
1445361
0.12–0.15 mm2
28 AWG
1445364
0.08–0.09 mm2
30 AWG
1445367
0.05–0.06 mm2
.000015 [0.00038] Gold Plated
26 AWG
1445360
0.12–0.15 mm2
28 AWG
1445363
0.08–0.09 mm2
30 AWG
1445366
0.05–0.06 mm2
Closed End
Connector Kit
No. of
Part Nos.
Circuits
2–28
1445368
2–28
2–28
1445371
2–28
2–28
1445374
2–28
2–28
1445370
2–28
2–28
1445373
2–28
2–28
1445376
2–28
2–28
1445369
2–28
2–28
1445372
2–28
2–28
1445375
2–28
5
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
MTA-50
.050 [1.27]
Connector Kits — Ribbon
Cable (Continued)
.068
2 Plcs.
[1.73]
Strain Relief Covers
Material and Finish
.040
2 Plcs.
[1.02]
Strain Relief Cover — UL 94V-0
rated, thermoplastic, black
.090 4 Plcs.
[2.29]
Feed-Thru
A
.237 ± .008
[6.02 ± 0.20]
.123 ± .006
[3.12 ± 0.15]
Feed-Thru
Closed End
.255
[6.48]
A
.237 ± .008
[6.02 ± 0.20]
Closed End
Feed-Thru and Closed End
No. of Circuits
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Dim. A
.260
6.60
.310
7.87
.360
9.14
.410
10.41
.460
11.68
.510
12.95
.560
14.22
.610
15.49
.660
16.76
.710
18.03
.760
19.30
.810
20.57
.860
21.84
.910
23.11
No. of Circuits
16
17
18
19
20
21
22
23
24
25
26
27
28
Dim. A
.960
24.38
1.010
25.65
1.060
26.92
1.110
28.19
1.160
29.46
1.210
30.73
1.260
32.00
1.310
33.27
1.360
34.54
1.410
35.81
1.460
37.08
1.510
38.35
1.560
39.62
6
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
Feed-Thru and Closed End
Connectors
Receptacle Assemblies — Discrete Wire
± .004
[± 0.10]
(See Note 1)
MTA-50
.050 [1.27]
A
.315 ± .006
[8.00 ± 0.15]
.150
[3.81]
Material and Finish
Housing — UL 94V-2 rated, thermoplastic
Contacts — Phosphor bronze;
.000100 [0.00254] min. tin in wire
termination area, over .000050 [0.00127]
min. nickel; choice on mating end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
Position 1
.050
Ref.
[1.27]
.035
Ref.
[0.89]
.190 ± .003
[4.83 ± 0.08]
.100 ± .003
[2.54 ± 0.08]
Notes:
1. To determine connector overall
length (dim. A), multiply .050 x the
number of circuits and add .082.
Example: .050 x 10 circuits
equals 0.50 + .082 = .582 [14.78].
Color Coding by Wire Size for
UL94V-0 Connectors
2. Strain relief covers shown on
page 8 are required and sold as
part of the Connector Kit.
26 AWG — Blue
28 AWG — Green
30 AWG — Brown
3. Stranded UL Style 1061 or equivalent wire is recommended.
4. Unless otherwise stated all tolerances (except plating) to be ±.005
[±0.13].
For Strain Relief Covers see
page 8.
For mating Headers see
pages 9 and 10.
For Mateability Guide, see
matrixes on page 4.
5. Consult Product Drawing for
RoHS Compliant information.
Connector Kits — Discrete Wire
Base Part Numbers
Connector Kit Ordering
Information
Connector Kit consists of
Receptacle Assembly and
Strain Relief Cover.
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part number 1445341
2 position = 0-1445341-2
and
28 position = 2-1445341-8
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
Connector
Type &
Wire Size
Feed-Thru
Connector Kit
No. of
Part Nos.
Circuits
Tin Plated
26 AWG
1445341
0.12–0.15 mm2
28 AWG
1445344
0.08–0.09 mm2
30 AWG
1445347
0.05–0.06 mm2
.000030 [0.00076] Gold Plated
26 AWG
1445343
0.12–0.15 mm2
28 AWG
1445346
0.08–0.09 mm2
30 AWG
1445349
0.05–0.06 mm2
.000015 [0.00038] Gold Plated
26 AWG
1445342
0.12–0.15 mm2
28 AWG
1445345
0.08–0.09 mm2
30 AWG
1445348
0.05–0.06 mm2
Closed End
Connector Kit
No. of
Part Nos.
Circuits
2–28
1445350
2–28
2–28
1445353
2–28
2–28
1445356
2–28
2–28
1445352
2–28
2–28
1445355
2–28
2–28
1445358
2–28
2–28
1445351
2–28
2–28
1445354
2–28
2–28
1445357
2–28
7
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
MTA-50
.050 [1.27]
Connector Kits —
Discrete Wire (Continued)
.068
2 Plcs.
[1.73]
Strain Relief Covers
Material and Finish
.040
2 Plcs.
[1.02]
Strain Relief Cover — UL 94V-0
rated, thermoplastic, black
.090 4 Plcs.
[2.29]
Feed-Thru
A
.237 ± .008
[6.02 ± 0.20]
.123 ± .006
[3.12 ± 0.15]
Feed-Thru
Closed End
.255
[6.48]
A
.237 ± .008
[6.02 ± 0.20]
Closed End
Feed-Thru and Closed End
No. of Circuits
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Dim. A
.260
6.60
.310
7.87
.360
9.14
.410
10.41
.460
11.68
.510
12.95
.560
14.22
.610
15.49
.660
16.76
.710
18.03
.760
19.30
.810
20.57
.860
21.84
.910
23.11
No. of Circuits
16
17
18
19
20
21
22
23
24
25
26
27
28
Dim. A
.960
24.38
1.010
25.65
1.060
26.92
1.110
28.19
1.160
29.46
1.210
30.73
1.260
32.00
1.310
33.27
1.360
34.54
1.410
35.81
1.460
37.08
1.510
38.35
1.560
39.62
8
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
Through-Hole Header
Assemblies
Vertical
Circuit #1
MTA-50
.050 [1.27]
Note: To determine header overall
length (dim. A), multiply .050
x the number of circuits and
add .150. Example: .050 x 6
circuits equals .300 + .150 =
.450 [11.43].
.035
[0.89]
Ref.
.170
[4.32]
A
.220 ± .003
[5.59 ± 0.08]
.060
[1.52]
.125
[3.18]
Ref.
Material and Finish
Housing — UL 94V-0 rated, thermoplastic, black
Contacts — Brass, .000100 [0.00254]
min. tin over .000050 [0.00127] min.
nickel on solder legs; choice on mating
end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
.035
Ref.
[0.89]
.016
Ref.
[0.41]
.050 Ref.
[1.27]
Base Part Numbers
.068
[1.73]
.100
Typ.
[2.54]
.060 ± .003
Dia.
[1.52 ± 0.08]
.050
Typ.
[1.27]
.035
[0.89]
Circuit #1
.0705
[1.90]
.031 ± .002
Dia. Typ.
[0.78 ± 0.05]
.250*
[6.35]
Recommended Mounting Hole Size and
Pattern for .062 [1.57] Thick PC Board
Through-Hole
Header
No. of
Part Nos.
Posts
Standard UL 94V-0, Tin Plated
1445120
2–28
Standard UL 94V-0
.000030 [0.00076] Gold Plated
1445125
2–28
Standard UL 94V-0
.000015 [0.00038] Gold Plated
1445123
2–28
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
Right-Angle
.220 ± .003
[5.59 ± 0.08]
A
Circuit #1
For mating Connector Kits
see pages 5 through 8.
.035
[0.89]
Ref.
.180
[4.57]
For mateability options, see
matrixes on page 4.
.125 Ref.
[3.18]
Header Ordering Information
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part number 1445120
.035
[0.89]
.100
[2.54]
.031 ± .002 Dia. Typ.
[0.78 ± 0.05]
Circuit #1
2 position = 0-1445120-2
and
28 position = 2-1445120-8
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
.016
[0.41]
Ref.
.050 Ref.
[1.27]
.210
[5.33]
.250*
[6.35]
.050
Typ.
[1.27]
Recommended Mounting Hole Size and
Pattern for .062 [1.57] Thick PC Board
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
.035
Ref.
[0.89]
Base Part Numbers
Through-Hole
Header
No. of
Part Nos.
Posts
Standard UL 94V-0, Tin Plated
1445169
2–28
Standard UL 94V-0
.000030 [0.00076] Gold Plated
1445171
2–28
Standard UL 94V-0
.000015 [0.00038] Gold Plated
1445170
2–28
9
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
MTA-50
.050 [1.27]
Surface Mount Header
Assemblies
Note: To determine header overall
length (dim. A), multiply .050
x the number of circuits and
add .150. Example: .050 x 6
circuits equals .300 + .150 =
.450 [11.43].
.035
Ref.
[0.89]
Vertical
Circuit #1
.170
[4.32]
A
.220 ± .003
[5.59 ± 0.08]
.249 Ref.
[6.32]
.028 ± .001
Typ.
[0.71 ± 0.03]
.100
Typ.
[2.54]
.050
Typ.
[1.27]
.100
.162
[2.54]
[4.11]
Material and Finish
Housing — UL 94V-0 rated, thermoplastic, black
Contacts — Brass, .000100 [0.00254]
min. tin over .000050 [0.00127] min.
nickel on solder pads; choice on mating
end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
Boardlock — Phosphor bronze, tin
plated .000100 [0.000254] min. over
.000050 [0.00127] min. nickel
.065 ± .001 Typ.
[1.65 ± 0.03]
.070 ± .003
2 Plcs.
[1.78 ± 0.08]
.145 ± .003
[3.68 ± 0.08]
2 Plcs.
.100
[2.54]
Circuit #1
.574*
[14.58]
Recommended PC Board Layout
for use with .010 [0.25] Thick Stencil
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
Right-Angle
Base Part Numbers
Surface Mount
Header
No. of
Part Nos.
Posts
Standard UL 94V-0, Tin Plated
1445121
2–28
Standard UL 94V-0
.000030 [0.00076] Gold Plated
1445126
2–28
Standard UL 94V-0
.000015 [0.00038] Gold Plated
1445124
2–28
Note: All SMT product is prepackaged in standard tape and
reel format.
A
.050 Ref.
[1.27]
.035 Ref.
[0.89]
For mating Connector Kits
see pages 5 through 8.
.220 ± .003
[5.59 ± 0.08]
Circuit #1
.180
[4.57]
For mateability options, see
matrixes on page 4.
Header Ordering Information
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part number 1445121
2 position = 0-1445121-2
and
28 position = 2-1445121-8
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
.162
[4.11]
.128
[3.25]
.100
[2.54]
.028 ± .001 Typ.
[0.71 ± 0.03]
.050
Typ.
[1.27]
Base Part Numbers
Circuit #1
.075 ± .001
[1.91 ± 0.03]
.145 ± .003
[3.68 ± 0.08]
2 Plcs.
.574*
[14.58]
.270 Ref.
[6.86]
.070 ± .003
[1.78 ± 0.08]
2 Plcs.
Recommended PC Board Layout
for use with .010 [0.25] Thick Stencil
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
Surface Mount
Header
No. of
Part Nos.
Posts
Standard UL 94V-0, Tin Plated
1445172
2–28
Standard UL 94V-0
.000030 [0.00076] Gold Plated
1445174
2–28
Standard UL 94V-0
.000015 [0.00038] Gold Plated
1445173
2–28
10
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.100 [2.54] Centerline MTA-100 IDC Connectors and Headers
Product Facts
■
■
■
■
■
■
■
■
■
■
■
R
■
R
Technical Documents
Product Specification
108-1050 MTA-100 Connectors
Application Specifications
114-1019 MTA-100 Connectors
114-1031 MTA-100 Ribbon Cable
Assembly
MTA-100
.100 [2.54]
■
Connectors and headers for
2 through 28 positions; wire
sizes of 22, 24, 26 and
28 AWG [0.4-0.08 mm2]
Wire-to-Post Connectors
preloaded with dual beam
contacts
Connectors and headers,
except shrouded headers,
are end-to-end stackable
Connector styles include
both closed end and feedthru connectors with locking
ramps, with and without
polarizing tabs
Molded ribs on housing do
not allow reverse mating
Posted connectors for 2
through 19 positions
Connectors preloaded with
IDC contacts
All contacts are slotted for
insulation displacement
(IDC) terminal technique
Contacts are lubricated for
fretting corrosion protection
Benefits derived from the
MTA-100 system include
increased quality and ease
of handling such as —
■ One-step assembly
■ No wire stripping
■ No contact damage
■ Reduced wiring errors
■ Simpler tooling
■ Simple maintenance and
repair
Meets the material requirements of Table 23.1 of
UL1410 Standards for
Television Receiver and
Video Products (wire-topost connectors only)
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Certified by Canadian
Standards
Association,
File No. LR7189
MTA-100 connectors
accept discrete and ribbon
cable wire sizes ranging
from 22 – 28 AWG [0.4 –
0.08 mm2] with maximum
insulation outside diameter
of .060 [1.52] for terminating single wire and .050
[1.27] for mass termination
of wires. Tin plated solid,
fused stranded, or stranded
(7 strands) wire with PVC
insulation can be used on
22 – 28 AWG [0.4 – 0.9 mm2]
MTA-100 connectors and
19 stranded wire on
22–24 AWG [0.4– 0.2 mm2]
MTA-100 connectors. Only
one wire to be terminated
into an IDC contact slot.
The wire-to-post connector
housing material is flame
retardant thermoplastic,
either UL94V-2 or UL94V-0
rated.
A full line of .100 [2.54]
centerline headers completes the system. Headers
are available with straight or
right-angle posts, in flat,
polarized or friction lock
styles. Headers are available in 2 through 28
positions. Shrouded headers
are available in 2 through
14 positions.
Performance Data*
Voltage Rating — 250 vac
Current Rating — 5 amp max.
Low-Level Resistance —
6 m⍀ max. initial
Dielectric Withstanding Voltage —
750 vac/1 min.
Insulation Resistance —
5000 M⍀ min. initial
Operating Temperature —
⫺55⬚ C to ⫹105⬚ C
Note: Refer to page 70 for approved
wire listings.
*Refer to the Product Specification
for additional electrical, mechanical
and environmental performance
tests and requirements.
11
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Connector/Header Mateability Guide
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 header and connector combination. Where a “Y” is indicated the combination is
a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating.
Headers
Connectors
6404
52
6404
53
6404
54
6404
55
6404
56
6404
57
6444
56
6444
57
6444
86
6444
88
6446
94
6446
95
6448
03
6448
61
6448
74
6448
75
6448
76
6448
77
6448
92
6448
93
6448
94
6470
47
6470
48
6470
50
6470
51
6471
06
6471
66
6475
02
6475
31
6476
09
6476
23
6475
32
1744
075
MTA-100
.100 [2.54]
Matrix for Tin Plated
Part Numbers
640440
640441
640442
640443
640468
640469
640470
640471
640620
640621
640622
640623
641311
641312
641313
641314
641534
641535
641536
641537
641653
641654
641655
641656
643498
643813
643814
643815
643816
643828
644083
644312
644313
644497
644511
644512
644513
644514
644540
644563
644564
644565
644574
644575
644576
644577
644578
644579
644795
*1375820
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
*Select contact plating to match header plating.
12
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Connector/Header Mateability Guide (Continued)
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 header and connector combination. Where a “Y” is indicated the combination is
a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating.
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Headers
Connectors
6412
11
6412
12
6412
13
6412
14
6412
15
6412
16
6444
87
6444
89
6448
84
6448
85
6448
86
6448
87
6448
96
6448
97
6448
98
6471
08
6471
09
6471
14
6471
16
6471
17
6471
68
6476
26
6476
24
6475
34
1744
047
1744
163
MTA-100
.100 [2.54]
641237
641238
641239
641240
641241
641242
641243
641244
644020
644042
644043
644044
644702
644726
*1375820
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Connectors
6411
22
6411
23
6411
24
6411
25
6411
26
6411
27
6448
88
6448
89
6448
90
6448
91
6470
75
6470
76
6470
78
6470
79
6471
07
6471
67
6474
67
6476
25
6476
27
6475
33
1744
074
Headers
641190
641191
641192
641193
641198
641199
641200
641201
644038
644040
647477
647480
*1375820
1744020
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
*Select contact plating to match header plating.
13
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 IDC Connectors—Closed End and Feed-Thru
Material and Finish
Closed End Connectors
MTA-100
.100 [2.54]
Housing — UL94V-2 rated, nylon, see
below for color; or UL94V-0 rated,
nylon, black
Contacts — Phosphor bronze, post tin
plated, .000030 [0.00076] or .000015
[0.00038] post gold-plated over nickel
.275
[6.99]
.275
[6.99]
Color Coding by
Wire Size for UL94V-2
Connectors
28 AWG — Green
26 AWG — Blue
24 AWG — White
22 AWG — Red
A
.056
[1.42]
.075
[1.91]
.245
[6.22]
.184
[4.67]
.100
Typ.
[2.54]
.520
[13.21]
Without Polarizing Tabs
All wire sizes in UL94V-0 —
Black
.075
[1.91]
For mateability options, see
matrix on pages 12 and 13.
.228
[5.80]
For mating half visuals, see
pages 20 thru 30.
With Polarizing Tabs
Notes:
1. Refer to pages 70-74 for
approved wire listing.
2. For strain reliefs and dust covers,
see page 16.
3. For keying plugs, see page 17.
4. Other circuit sizes are available
upon request. Minimums may
apply.
5. Connector circuits can be molded
closed for keying purposes.
Minimums may apply.
6. Where no part numbers appear in
the chart, parts can be made
available upon request. Minimums
may apply.
7. To determine connector overall
length (dim. A), multiply .100 x the
number of circuits. Example: .100
x 10 circuits equals 1.000 inch
[25.4 mm].
Feed-Thru Connectors
.275
[6.99]
A
.075
[1.91]
.305
[7.75]
.056
[1.42]
.245
[6.22]
.184
[4.67]
.100
Typ.
[2.54]
.520
[13.21]
Without Polarizing Tabs
.075
[1.91]
.228
[5.80]
With Polarizing Tabs
14
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 IDC Connectors—Closed End and Feed-Thru (Continued)
Connector Ordering
Information
Base Part Numbers
Closed End
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Lead Free
RoHS
Prefix/Suffix
3-640440-2
3-640440-3
3-640440-4
3-640440-5
3-640440-6
3-640440-7
3-640440-8
3-640440-9
4-640440-0
4-640440-1
4-640440-2
4-640440-3
4-640440-4
4-640440-5
4-640440-6
4-640440-7
4-640440-8
4-640440-9
5-640440-0
5-640440-1
5-640440-2
5-640440-3
5-640440-4
5-640440-5
5-640440-6
5-640440-7
5-640440-8
Without Tabs
Connector Type
& Wire Size
Connector
Part Nos.
Standard UL94V-2, Tin Plated
22 AWG
640440
0.3–0.4 mm2
24 AWG
640441
0.2 mm2
26 AWG
640442
0.12–0.15 mm2
28 AWG
640443
0.08–0.09 mm2
Feed-Thru
With Tabs
With Tabs
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
32–58
643813
32–58
640620
32–58
6445401
32–45
32–58
643814
32–58
640621
32–58
6445631
32–54
32–58
643815
32–58
640622
32–58
6445641
32–45
32–58
643816
32–58
640623
32–58
6445651
32–45
644511
42–68
641311
32–58
—
—
644512
32–58
641312
32–58
—
—
644513
32–58
641313
32–58
—
—
644514
32–58
641314
32–58
—
—
644042
32–58
641241
32–58
6447021
32–45
644020
32–58
641242
32–58
—
—
1
644043
32–44
641243
32–58
644726
6440441
32–44
641244
32–58
—
—
32–44
641198
32–58
647477
32–46
32–44
641199
32–58
—
—
32–44
641200
32–58
647480
32–43
—
641201
32–58
—
—
Tape Mounted on Reel UL94V-2, Tin Plated
22 AWG
640468
32–58
0.3–0.4 mm2
24 AWG
640469
32–58
0.2 mm2
26 AWG
640470
32–58
0.12–0.15 mm2
28 AWG
640471
32–58
0.08–0.09 mm2
Standard UL94V-2, .000030 [0.00076] Gold Plated
22 AWG
641237
32–58
0.3–0.4 mm2
24 AWG
641238
32–58
0.2 mm2
26 AWG
641239
32–58
0.12–0.15 mm2
28 AWG
641240
32–58
0.8–0.9 mm2
Standard UL94V-2, .000015 [0.00038] Gold Plated
22 AWG
641190
32–58
6440381
0.3–0.4 mm2
24 AWG
641191
32–58
17440201
0.2 mm2
26 AWG
641192
32–58
6440401
0.12–0.15 mm2
28 AWG
641193
32–58
—
0.08–0.09 mm2
LED*, UL94V-2, Tin Plated (See Note 1)
22 AWG
641534
0.3–0.4 mm2
24 AWG
641535
0.2 mm2
26 AWG
641536
0.12–0.15 mm2
28 AWG
641537
0.08–0.09 mm2
Without Tabs
1
32–45
32–33
—
—
641653
32–33
—
—
32–33
644795
32–33
641654
32–33
—
—
32–33
—
—
641655
32–33
—
—
32–33
—
—
641656
32–33
—
—
32–45
6445781
32–45
32–45
6445791
32–45
32–45
6444971
32–45
Standard UL94V-0, Tin Plated (Gold is available, minimums may apply.) (Black in color)
22 AWG
32–45
6440831
32–45
6445751
6434981
0.3–0.4 mm2
24 AWG
6445741
32–45
6443121
32–45
6445761
0.2 mm2
26 AWG
6438281
32–45
6443131
32–45
6445771
0.12–0.15 mm2
MTA-100
.100 [2.54]
The “Base Part Numbers”
Chart at right shows the base
part number, and their
RoHS (Restrictions on
Certain Hazardous
Substances) Compliant
(lead free) equivalent available for the described connectors.
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
10-position closed end connector without polarizing tabs
for 22 AWG wire would be:
Base number 640440 plus
prefix-and-suffix
4- — -0
The correct ordering number is 4-640440-0
All part numbers are the
RoHS equivalent version.
Example:
*LED connectors are designed to mate with .014–.020 [0.36–0.51] diameter posts or square leads.
1
Other circuit sizes are available upon request. Minimums may apply.
2
Tape mounted.
Note: Blocked circuit configurations are available. Contact product engineer or product manager for details.
Minimums may apply.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
15
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 IDC Connector Accessories
Covers
Closed End Strain Relief Covers
Strain Relief Cover — UL94V-2
rated, nylon, white
Dust Covers — UL94V-0 rated,
polyester, white
MTA-100
.100 [2.54]
.345
[8.76]
.127
[3.23]
Material (RoHS Compliant)
Closed End Dust Covers
.335
[8.51]
Retention Dimple
.340
[8.64]
A
.360
[9.14]
.105
[2.67]
.130
[3.3]
A
Note: This portion of the front locking bar
may or may not be present.
Feed-Thru Strain Relief Covers
.127
[3.23]
Feed-Thru Dust Covers
.360
[9.14]
Retention Dimple
.245
[6.22]
A
Cover Ordering Information
.395
[10.03]
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described cover.
Prefixes and suffixes are
determined by the number
of circuit positions in the
cover. For example, the
complete part number for
a 10-position closed end
strain relief cover would be:
Base number 643075 plus
prefix-and-suffix
1- — -0
The correct ordering number is
.130
[3.3]
A
Note: This portion of the front locking bar
may or may not be present.
Base Part Numbers
Closed End
Strain Relief
Dust
Covers
Covers
Cover
No. of
Cover
No. of
Part Nos.
Circuits
Part Nos.
Circuits
643075
2–28
640550
2–28
Feed-Thru
Strain Relief
Dust
Covers
Covers
Cover
No. of
Cover
No. of
Part Nos.
Circuits
Part Nos.
Circuits
643077
2–28
640642
3-28
1-643075-0
Cover Length
No. of
Circuits
2
3
4
5
6
7
8
Dim.
A
.200
5.08
.300
7.62
.400
10.16
.500
12.7
.600
15.24
.700
17.78
.800
20.32
Prefix/
Suffix
No. of
Circuits
-2
9
-3
10
-4
11
-5
12
-6
13
-7
14
-8
15
Dim.
A
.900
22.86
1.00
25.4
1.100
27.94
1.200
30.48
1.300
33.02
1.400
35.56
1.500
38.1
Prefix/
Suffix
No. of
Circuits
-9
16
1- -0
17
1- -1
18
1- -2
19
1- -3
20
1- -4
21
1- -5
22
Dim.
A
1.600
40.64
1.700
43.18
1.800
45.72
1.900
48.26
2.000
50.8
2.100
53.34
2.200
55.88
Prefix/
Suffix
No. of
Circuits
1- -6
23
1- -7
24
1- -8
25
1- -9
26
2- -0
27
2- -1
28
Dim.
A
2.300
58.42
2.400
60.96
2.500
63.5
2.600
66.04
2.700
68.58
2.800
71.12
Prefix/
Suffix
2- -3
2- -4
2- -5
2- -6
2- -7
2- -8
2- -2
16
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 IDC Connector Accessories (Continued)
Keying Plug with Carrier
Strip (10 plugs per strip)
Part No. 641994-1
.027
Sq.
[0.69]
.038
[0.97]
.300
[7.62]
Material (RoHS Compliant)
MTA-100
.100 [2.54]
UL94V-2 rated, nylon, natural color
.065
[1.65]
.077
[1.96]
Note: Removal of contact is not
necessary when using keying plug.
.125
[3.18]
.500
Ref.
[12.7]
1.800
Ref.
[45.72]
Replacement IDC Contacts
AWG
mm
22
24
26
28
0.3–0.4
0.2
0.12–0.15
0.08–0.09
Material and Finish
Phosphor bronze, post tin plated;
.000030 [0.00076] or .000015
[0.00038] post gold plated over nickel
Standard
Tin Plated
640636-3
640637-3
640638-3
640639-2
2
Note: Tyco Electronics does not recommend terminating an MTA
contact more than one time.
Use replacement contacts
when required for field repairs
or wire changes.
LED
Tin Plated
641643-2
641644-2
641645-2
641646-2
2
.452
[11.48]
.142
[3.61]
Max.
Crimp Snap-In Contacts
Material and Finish
Part Numbers
.000030 [0.00076]
.000015 [0.00038]
Gold Plated
Gold Plated
641186-4
641186-3
641187-4
641187-3
641188-4
641188-3
641189-4
641189-3
Wire Size
.070
[1.78]
Wire Size
AWG
mm2
26-22 0.12–0.4
.075
[1.91]
Part Nos.
Loose Piece* Strip**
640709-2 640708-2
**Hand Tool No. 59836-1 (IS 408-6527)
**Applicator No. 466747-1 (IS 408-8040)
Phosphor bronze, tin plated
.425
[10.8]
.070
[1.78]
Special applications for crimp snap-in contacts are:
1. Double wire per contact
2. Coax or shielded wire
3. Mixed wire size in same connector
Note: Only one crimp snap-in contact per connector.
17
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Posted Connector/Connector Mateability Guide
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 posted connector and connector combination. Where a “Y” is indicated the
combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating.
Posted Connectors
Connectors
6470
00
6470
01
6470
02
6470
03
6470
04
6470
05
6470
06
6470
07
MTA-100
.100 [2.54]
Matrix for Tin Plated
Part Numbers
640440
640441
640442
640443
640468
640469
640470
640471
640620
640621
640622
640623
641311
641312
641313
641314
641534
641535
641536
641537
641653
641654
641655
641656
643498
643813
643814
643815
643816
643828
644083
644312
644313
644497
644511
644512
644513
644514
644540
644563
644564
644565
644574
644575
644576
644577
644578
644579
644795
1375820
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y
Y
Y
Y
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y
Y
Y
Y
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y
Y
Y
Y
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y
Y
Y
Y
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y
Y
Y
Y
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y
Y
Y
Y
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y
Y
Y
Y
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y*
Y
Y
Y
Y
Y*
Y*
Y*
N
*2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100
connectors with polarizing tabs.
18
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Posted Connector/Connector Mateability Guide (Continued)
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 posted connector and connector combination. Where a “Y” is indicated the
combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating.
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Posted Connectors
Connectors
6470
08
6470
09
6470
10
6470
11
6470
12
6470
13
6470
14
6470
15
MTA-100
.100 [2.54]
641237
641238
641239
641240
641241
641242
641243
641244
644020
644042
644043
644044
644702
644726
1375820
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y*
Y*
N
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
Y*
Y*
N
*2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100
connectors with polarizing tabs.
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
Connectors
6470
08
6470
09
6470
10
6470
11
6470
12
6470
13
6470
14
6470
15
Posted Connectors
641190
641191
641192
641193
641198
641199
641200
641201
644038
644040
647477
647480
1375820
1744020
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
N
Y*
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
N
Y*
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
N
Y*
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
N
Y*
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
N
Y*
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
N
Y*
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
N
Y*
Y
Y
Y
Y
Y
Y
Y
Y
Y*
Y*
Y*
Y*
N
Y*
*2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100
connectors with polarizing tabs.
19
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 IDC Posted Connectors (Wire-to-Wire)—Closed End, Feed-Thru
Closed End
Material and Finish
Feed-Thru
Housing — UL 94V-2 rated, nylon, see
chart for color
Contacts — Copper alloy, post tin or
gold plated over nickel (see chart)
B
Dim.
B
Dim.
MTA-100
.100 [2.54]
Notes:
1. Mating half visuals - pages 14 & 15.
2. Use feed thru strain relief covers & feed
thru dust covers (if needed) - page 16.
3. Approved wire listing - pages 70 thru 74.
.843
[21.40]
.079
[2.00]
A Dim.
.079
[2.00]
A Dim.
.025
Sq.
[0.54]
.025
Sq.
[0.54]
.303
[7.70]
.303
[7.70]
.415
[10.54]
.415
[10.54]
.100
Typ.
[2.54]
Connector Type
& Wire Size
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are
determined by the number of
circuit positions in the connector. For example, the complete
part number for a 12-position
closed end connector for
22 AWG wire would be:
Base number 647000 plus
prefix-and-suffix
4- — -2
The correct ordering number is
4-647000-2
All part numbers are the RoHS
equivalent version. Example:
No. of
Pos.
2
19
Lead Free
RoHS
Prefix/Suffix
3-647000-2
thru
4-647000-9
See page 15 for an explanation of RoHS
lead free equivalents.
Note: All RoHS equivalent part numbers
may not be available upon catalog
release. If the number you need is not
available, please contact Product
Engineering to expedite your request.
Color Coding by Wire Size
for UL 94V-2 Connectors
22 AWG — Red
24 AWG — White
26 AWG — Blue
28 AWG — Green
.100
Typ.
[2.54]
Base Part Numbers
Connector Ordering
Information
Part Nos.
Standard UL 94V-2, Tin Plated
22 AWG
0.3–0.4 mm2
24 AWG
0.2 mm2
26 AWG
0.12–0.15 mm2
28 AWG
0.08–0.09 mm2
Closed End Connector
RoHS Equiv.
32–491
647004
—2
647001
32–491
647005
—2
647002
32–49
1
647006
—2
32–49
1
647007
—2
32–491
647012
—2
32–49
1
647013
—2
32–49
1
647014
—2
32–491
647015
—2
32–491
647020
—2
1
647021
—2
32–491
647022
—2
32–491
647023
—2
647003
Standard UL 94V-2, .000015 [0.00038] Gold Plated
22 AWG
647016
0.3–0.4 mm2
24 AWG
647017
0.2 mm2
26 AWG
647018
0.12–0.15 mm2
28 AWG
647019
0.08–0.09 mm2
2
Feed-Thru Connector
Part Nos.
No. of Circuits
647000
Standard UL 94V-2, .000030 [0.00076] Gold Plated
22 AWG
647008
0.3–0.4 mm2
24 AWG
647009
0.2 mm2
26 AWG
647010
0.12–0.15 mm2
28 AWG
647011
0.08–0.09 mm2
1
.843
[21.40]
32–49
2 and 3 position MTA-100 Posted Connectors (Closed End) can not mate with MTA-100 connectors with polarizing tabs.
Parts may be manufactured upon request. Minimums may apply. Contact product engineer or product manager for details.
No. of
Circuits
2
3
4
5
Dim.
A
B
.300
.227
[7.62] [5.77]
.400
.327
[10.16] [8.31]
.500
.427
[12.70] [10.85]
.600
.527
[15.24] [13.39]
No. of
Circuits
6
7
8
9
Dim.
A
B
.700
.627
[17.78] [15.93]
.800
.727
[20.32] [18.47]
.900
.827
[22.86] [21.01]
1.000
.927
[25.40] [23.55]
No. of
Circuits
10
11
12
13
Dim.
A
B
1.100
1.027
[27.94] [26.09]
1.200
1.127
[30.48] [28.63]
1.300
1.227
[33.02] [31.17]
1.400
1.327
[35.56] [33.71]
No. of
Circuits
14
15
16
17
18
Contacts — Copper alloy, post tin or
gold plated over nickel
Performance Data
–55°C to +105°C
Voltage Rating — 250 VAC
Current Rating — 4 amp max.
Low-Level Resistance —
16 mΩ max. initial
Dielectric Withstanding Voltage —
750 VAC/1 min.
Insulation Resistance — 5000 MΩ
min. initial
Operating Temperature —
Technical Documents
Product Specification
108-1050-1 MTA-100 Posted
Connector
Application Specification
114-1019 MTA-100 Connectors
Replacement IDC Contacts
Material and Finish
19
Dim.
A
B
1.500
1.427
[38.10] [36.25]
1.600
1.527
[40.64] [38.79]
1.700
1.627
[43.18] [41.33]
1.800
1.727
[45.72] [43.87]
1.900
1.827
[48.26] [46.41]
2.000
1.927
[50.80] [48.95]
Part Numbers
Tin
.000030
Plated
[.00076]
Gold Plated
22 0.3–0.4 3-647030-1 3-647030-2
24
0.2
3-647031-1 3-647031-2
26 0.12–0.15 3-647032-1 3-647032-2
28 0.8–0.9 3-647033-1 3-647033-2
Wire Size
AWG mm2
.075
[1.91]
.083
[2.10]
.770
[19.55]
.025
[0.64]
20
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Flat Headers—Straight and Right-Angle
Material and Finish
Straight Post (.025 [0.64] Square)
Right-Angle Post (.025 [0.64] Square)
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.200
[5.08]
.200
[5.08]
A
.025
[0.64]
Sq.
.100
[2.54]
.050 Typ.
[1.27]
Typ.
Post No. 1
A
.100
[2.54]
.295
[7.49]
.025
[0.64]
Sq.
.140
[3.56]
Ref.
.100
[2.54]
For mateability options, see
matrix on pages 12 and 13.
.062
[1.57]
.140
[3.56]
Ref.
.535
[13.59]
.050
[1.27]
Typ.
MTA-100
.100 [2.54]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
Post No. 1
.295
[7.49]
.100
[2.54]
Typ.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts
would be:
Base number 641211 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-641211-0
All part numbers are the RoHS
equivalent version. Example:
No. of
Pos.
2
28
X = .120 [3.05] min., .240 [6.1] max.
when mated with MTA-100 Connector.
X = .120 [3.05] min., when mated with
CST-100 II Connector.
Edge of Board
.120
[3.05]
Min.
.050/.040
Dia.
[1.27/1.02]
Edge of Board
.100
[2.54]
Typ.
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
.100 Typ.
[2.54]
X
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Lead Free
RoHS
Prefix/Suffix
3-641211–2
thru
5-641211-8
.050/.040
Dia.
[1.27/1.02]
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Base Part Numbers
Straight Posts
Header
No. of Posts/
Part Nos.
RoHS Equiv.
Standard UL94V-0, Tin Plated
640452
2–28
Right-Angle Posts
Header
No. of Posts/
Part Nos.
RoHS Equiv.
640453
2–28
Standard UL94V-0, .000030 [0.00076] Gold Plated
2–28
641211
641212
32–58
2–28
32–58
Standard UL94V-0, .000015 [0.00038] Gold Plated
2–28
641122
641123
32–58
2–28
32–58
21
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Narrow Flat Headers—Straight and Right-Angle
Material and Finish
Straight Post (.025 [0.64] Square)
Right-Angle Post (.025 [0.64] Square)
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
MTA-100
.100 [2.54]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Headers without retentive legs are
suitable for breakaway application.
3. 2 or 3 retentive leg(s) per header,
depending upon number of positions.
4. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
5. To determine header overall
length (dim. A) multiply .100 x the
number of posts minus (–) .012.
Example: .100 x 10 posts – .012
= .988 inches [25.1 mm].
.110
[2.79]
Ref.
.0335
[0.85]
.092
[2.34]
A
A
.092
[2.34]
.100
[2.54]
Typ.
.150
[3.81]
.100
[2.54]
Typ.
Post No. 1
.295
[7.49]
.100
[2.54]
Straight and
Right-Angle
Post with
Retentive Legs
.100
[2.54]
.505
[12.83]
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
.044
[1.12]
Typ.
.025
[0.64]
Sq.
.260
[6.6]
Post No. 1
.044
[1.12]
Typ.
.025
[0.64]
Sq.
.110
[2.79]
Ref.
.110
Ref.
[2.79]
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts and
without retentive legs would be:
Base number 644456 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-644456-0
All part numbers are the RoHS
equivalent version. Example:
No. of
Pos.
2
28
Lead Free
RoHS
Prefix/Suffix
3-644456-2
thru
5-644456-8
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
.100
[2.54]
Typ.
.100
[2.54]
Typ.
Edge of Board
.050/.040
Dia.
[1.27/1.02]
For Straight Leg
Headers
.037 ± .002
Dia.
[0.94 ± 0.05]
For Retentive Leg
Headers
.060
[1.52]
Min.
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
Edge of Board
.050/.040
Dia.
[1.27/1.02]
For Straight Leg
Headers
±
.002
.037
Dia.
[0.94 ± 0.05]
For Retentive Leg
Headers
.060
[1.52]
Min.
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Base Part Numbers
Straight Posts
Without
With
Retentive Legs
Retentive Legs
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
644456
32–58
Right-Angle Posts
Without
With
Retentive Legs
Retentive Legs
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
32–58
644457
32–58
644694
32–58
Standard UL94V-0, .000030 [0.00076] Gold Plated
644884
2–28
644886
2–28
644885
2–28
644887
2–28
Standard UL94V-0, .000015 [0.00038] Gold Plated
644888
2–28
644890
2–28
644889
2–28
644891
2–28
644695
High temperature product available. Please contact Sales Engineer or Product Information Center.
22
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Polarized Headers—Straight and Right-Angle
Material and Finish
Straight Post (.025 [0.64] Square)
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.225
[5.72]
.225
[5.72]
.125
[3.18]
.125
[3.18]
A
A
.100
[2.54]
Typ.
.025
[0.64]
Sq.
.035
Min.
[0.89]
Post
No. 1
.295
[7.49]
.295
[7.49]
.290
[7.37]
.535
[13.59]
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
.100
[2.54]
Typ.
.050
[1.27]
Typ.
.025
[0.64]
Sq.
.035
[0.89]
Min.
.050
[1.27]
Typ.
Post
No. 1
MTA-100
.100 [2.54]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. All posts on retentive leg headers
are bent.
4. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
Right-Angle Post (.025 [0.64] Square)
.290
[7.37]
.100
[2.54]
.140
[3.56]
Ref.
.140 Max.
[3.56]
.140
[3.56]
.100
[2.54]
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 641213 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-641213-0
All part numbers are the RoHS
equivalent version. Example:
No. of
Pos.
2
28
Lead Free
RoHS
Prefix/Suffix
3-641213-2
thru
5-641213-8
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
.125
[3.18]
Ref.
34°
.135
Ref.
[3.43]
34°
Retentive Leg
.050/.040 Dia. for straight
[1.27/1.02] leg headers
.037 ± .002 Dia. for retentive
[0.94 ± 0.05] leg headers
Edge of Board
Edge of Board
.100
[2.54]
Typ.
.130
[3.30]
Min.
Retentive Leg
.050/.040 Dia. for straight
[1.27/1.02] leg headers
.037 ± .002 Dia. for retentive
[0.94 ± 0.05] leg headers
X
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
.100
[2.54]
Typ.
X = .110 [2.79] min., .160 [4.06]
max. when mated with
MTA-100 Connector.
X = .110 [2.79] min., .120 [3.05]
max. when mated with
CST-100 II Connector.
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Base Part Numbers
Straight Posts
Without
With
Retentive Legs
Retentive Legs
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
640454
2–28
Right-Angle Posts
Without
With
Retentive Legs
Retentive Legs
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
2–28
640455
2–28
644877
2–28
Standard UL94V-0, .000030 [0.00076] Gold Plated
641213
32–58
—
—
641214
32–58
—
—
Standard UL94V-0, .000015 [0.00038] Gold Plated
641124
32–58
—
—
641125
32–58
—
—
644876
23
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Friction Lock Headers—Straight and Right-Angle
Material and Finish
Straight Post (.025 [0.64] Square)
MTA-100
.100 [2.54]
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Right-Angle Post (.025 [0.64] Square)
.225
[5.72]
.225
[5.72]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. All posts on retentive leg headers
are bent.
4. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
.125
[3.18]
.125
[3.18]
A
A
.025
[0.64]
Sq.
.040
[1.02]
Max.
.295
[7.49]
Post
No. 1
.050
[1.27]
Typ.
For mateability options, see
matrix on pages 12 and 13.
.140
[3.56]
Ref.
.025
[0.64]
Sq.
.040
[1.02]
Max.
.050
[1.27]
Typ.
.310
[7.87]
.535
[13.59]
.100
[2.54]
Typ.
.100
[2.54]
Typ.
Post
No. 1
.100
[2.54]
.295
[7.49]
.100
[2.54]
.310
[7.87]
.140
[3.56]
.140
[3.56]
Max.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 641215 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-641215-0
All part numbers are the RoHS
equivalent version. Example:
No. of
Pos.
Standard
Prefix/Suffix
2
641215-2
thru
2-641215-8
28
Lead Free
RoHS
Prefix/Suffix
3-641215-2
.125
[3.18]
Ref.
34°
Retentive Leg
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Retentive Leg
.050/.040 Dia. for straight
[1.27/1.02] leg headers
.037 ± .002 Dia. for retentive
[0.94 ± 0.05] leg headers
Edge of Board
Edge of Board
.100
[2.54]
Typ.
.130
[3.30]
Min.
.050/.040 Dia. for straight
[1.27/1.02] leg headers
.037 ± .002 Dia. for retentive
[0.94 ± 0.05] leg headers
X
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
.100
[2.54]
Typ.
X = .110 [2.79] min., .160 [4.06]
max. when mated with
MTA-100 Connector.
X = .110 [2.79] min., .120 [3.05]
max. when mated with
CST-100 II Connector.
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Note: Consult Product Drawing for details
on placing headers onto PC boards.
5-641215-8
See page 15 for an explanation of
RoHS lead free equivalents.
.135
[3.43]
34°
Base Part Numbers
Straight Posts
Without
With
Retentive Legs
Retentive Legs
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
640456
2–28
Right-Angle Posts
Without
With
Retentive Legs
Retentive Legs
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
2–28
640457
2–28
644875
2–28
Standard UL94V-0, .000030 [0.00076] Gold Plated
641215
32–58
—
—
641216
32–58
—
—
Standard UL94V-0, .000015 [0.00038] Gold Plated
641126
32–58
—
—
641127
32–58
—
—
644874
24
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Page_Head
(Continued)
MTA-100
Headers
with Retention Peg—Straight
Friction Lock
Material and Finish
.113
[2.87]
Housing — UL94V-0 rated, thermoplastic, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.250
[6.35]
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Post No. 1
.135
[3.43]
.025 ± .001
[0.64 ± 0.03]
Square Typ.
No. of
Pos.
Standard
Prefix/Suffix
2
3
4
5
6
7
8
9
10
11
12
647609-2
647609-3
647609-4
647609-5
647609-6
647609-7
647609-8
647609-9
1-647609-0
1-647609-1
1-647609-2
.125
[3.18]
.100
Typ.
[2.54]
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
.347 ± .010
[8.81 ± 0.25]
.550 ± .010
[13.97 ± 0.25]
.113
[2.87]
Post No. 1
.290 ± .010
± 0.25]
.135 [7.37
[3.43]
.125
[3.18]
.100
Typ.
[2.54]
.025 ± .001
[0.64 ± 0.03]
Square Typ.
.055
Min.
[1.39]
.250
[6.35]
A
Lead Free
RoHS
Prefix/Suffix
3-647609-2
3-647609-3
3-647609-4
3-647609-5
3-647609-6
3-647609-7
3-647609-8
3-647609-9
4-647609-0
4-647609-1
4-647609-2
.290 ± .010
[7.37 ± 0.25]
.070
[1.78]
.050
[1.27]
Polarized
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 647609 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-647609-0
All part numbers are the RoHS
equivalent version. Example:
.025-.040
[0.64-1.01]
MTA-100
.100 [2.54]
A
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
.100
Typ.
[2.54]
Ø .052 ± .002
[1.32 ± 0.05]
.055
[1.40]
.070
[1.78]
.050
[1.27]
.347 ± .010
.550 ± .010
[8.81 ± 0.25] [13.97 ± 0.25]
.070 Min.
[1.78]
.090
[2.29]
Ø .040 ± .003
[1.02 ± 0.07 ]
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Base Part Numbers
Friction Lock
Header
RoHS
Part Nos.
Equiv.
Header
Part Nos.
Polarized
RoHS
Equiv.
Standard UL94V-0, Tin Plated
647609
32-42
647623
32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
647626
32-42
647624
32-42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647627
32-42
647625
32-42
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
25
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100
.100 [2.54]
MTA-100 High Profile Headers—Right-Angle
Material and Finish
Friction Lock
Polarized
Housing — UL94V-0 rated, thermoplastic, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Right-Angle Post (.025 [0.64] Square)
Right-Angle Post (.025 [0.64] Square)
A
Notes:
1. Post(s) can be omitted for keying
.250
purposes. Specify the desired
[6.35]
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall length
(dim. A) multiply .100 x the number
of posts. Example: .100 x 10 posts
equals 1.000 inch [25.4 mm].
4. This product can be mounted in
the middle of the PC Board as
shown in the PCB layout.
.250
[6.35]
A
.025
[0.64]
Sq.
.290
[7.37]
.050
[1.27]
2
3
4
5
6
7
8
9
10
11
12
Lead Free
RoHS
Prefix/Suffix
3-647630-2
3-647630-3
3-647630-4
3-647630-5
3-647630-6
3-647630-7
3-647630-8
3-647630-9
4-647630-0
4-647630-1
4-647630-2
.070
[1.78]
.050
[1.27]
.112
[2.84]
.125
[3.18]
.347
[8.81]
.140
[3.56]
.125
[3.18]
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with right-angle posts would be:
Base number 647630 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-647630-0
All part numbers are the RoHS
equivalent version. Example:
No. of
Pos.
.100
[2.54]
.290
Post
No. 1 [7.37]
.347
[8.81]
.112
[2.84]
.100
[2.54]
.025
[0.64]
Sq.
.040
[1.02]
Max.
Post No. 1
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
.113
[2.87]
.113
[2.87]
.100
Typ.
[2.54]
.040 ± .003
Dia.
[1.02 ± 0.07]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Base Part Numbers
Friction Lock
Right-Angle Posts
Header
RoHS
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
647630
32-42
Polarized
Right-Angle Posts
Header
RoHS
Part Nos.
Equiv.
647651
32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
647629
32-42
647653
32-42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647628
32-42
647652
32-42
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
26
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Page_Head
(Continued)
MTA-100
Polarized
High Temperature Headers—Straight and Right-Angle
Material and Finish
For use with Infrared Reflow Process
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
Straight Post (.025 [0.64] Square)
.250
[6.35]
2
12
13
18
Lead Free
RoHS
Prefix/Suffix
3-647047-2
thru
4-647047-2
NA
thru
NA
.250
[6.35]
.113
[2.87]
.113
[2.87]
A
.100
[2.54]
.025
[0.64]
Sq.
.070
[1.78]
.050
[1.27]
Post
No. 1
.025
[0.64]
Sq.
.290
[7.37]
.125
[3.18]
.070
[1.78]
.050
[1.27]
.112
[2.84]
.135
[3.43]
.060
[1.52]
Pre-Tinned Land
Both Sides Typ.
.100
[2.54]
.290
Post
No. 1 [7.37]
.347
[8.81]
.550
[13.97]
Header Ordering
Information
No. of
Pos.
Right-Angle Post (.025 [0.64] Square)
A
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 647047 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-647047-0
All part numbers are the RoHS
equivalent version. Example:
Maximum Temperature Rating: 2–12 Position: 280°C
13–18 Position: 235°C
MTA-100
.100 [2.54]
Housing —
2–12 Position — UL94V-0 rated,
nylon, black
13–18 Position — UL94V-0 rated,
LCP, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.347
[8.81]
.140
[3.56]
.125
[3.18]
.008
[0.20]
Min. Thk. Solder
Paste In Area Shown
.100
[2.54]
Typ.
Post No. 1
.040
[1.02]
Pre-Tinned Plated
Thru Hole Typ.
.300
[7.62]
.150
[3.81]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
.0325
[0.826]
.065
[1.65]
Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board
Base Part Numbers
Straight Posts
Header
RoHS
Part Nos.
Equiv.
Straight Posts (Tube Loaded)
Header
RoHS
Part Nos.
Equiv.
Right-Angle Posts
Header
RoHS
Part Nos.
Equiv.
See page 15 for an explanation of
RoHS lead free equivalents.
Standard UL94V-0, Tin Plated
647047
32–42
647298
32–42
647048
32–42
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Standard UL94V-0, .000030 [0.00076] Gold Plated
647109
32–42
647300
32–42
647114
32–42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647075
32–42
647299
32–42
647076
32–42
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or
product manager for details.
27
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Friction Lock High Temperature Headers—Straight and Right-Angle
For use with Infrared Reflow Process
Material and Finish
MTA-100
.100 [2.54]
Housing —
2–12 Position — UL94V-0 rated,
nylon, black
13–18 Position — UL94V-0 rated,
LCP, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Straight Post (.025 [0.64] Square)
.250
[6.35]
2
647050-2
thru
1-647050-2
1-647050-3
thru
1-647050-8
12
13
Lead Free
RoHS
Prefix/Suffix
3-647050-2
4-647050-2
NA
.113
[2.87]
.113
[2.87]
A
A
.025
[0.64]
Sq.
.040
[1.02]
Max.
Post No. 1
.290
[7.37]
.050
[1.27]
.100
[2.54]
.125
[3.18]
.025
[0.64]
Sq.
.290
[7.37]
.347
[8.81]
.112
[2.84]
.130
[3.30]
.050
[1.27]
.100
[2.54]
.125
[3.18]
.008
[0.20]
Min. Thk. Solder
Paste In Area Shown
.100
[2.54]
Typ.
.060
[1.52]
Pre-Tinned Land
Both Sides Typ.
.040
[1.02]
Max.
Post No. 1
.347
[8.81]
.550
[13.97]
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 647050 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-647050-0
All part numbers are the RoHS
equivalent version. Example:
Standard
Prefix/Suffix
Right-Angle Post (.025 [0.64] Square)
.250
[6.35]
Header Ordering
Information
No. of
Pos.
Maximum Temperature Rating: 2–12 Position: 280°C
13–18 Position: 235°C
Post No. 1
.040
[1.02]
Pre-Tinned Plated
Thru Hole Typ.
.300
[7.62]
.150
[3.81]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
.0325
[0.826]
.065
[1.65]
Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board
Base Part Numbers
Straight Posts
Header
RoHS
Part Nos.
Equiv.
Straight Posts (Tube Loaded)
Header
RoHS
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
647050
32-42
Right-Angle Posts
Header
RoHS
Part Nos.
Equiv.
647295
32-42
647051
32-42
See page 15 for an explanation of
RoHS lead free equivalents.
Standard UL94V-0, .000030 [0.00076] Gold Plated
647116
32-42
647297
32-42
647117
32-42
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Standard UL94V-0, .000015 [0.00038] Gold Plated
647078
32-42
647296
32-42
647079
32-42
18
NA
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or
product manager for details.
28
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Polarized and Friction Lock Surface Mount Headers—Straight
Material and Finish
For use with Infrared Reflow Process
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Polarized Header
Friction Lock Header
.113
[2.87]
.318
[8.08]
Ref.
.113
[2.87]
.318
[8.08]
Ref.
.250
[6.35]
.025
[0.64]
Sq.
.290
[7.37]
.050
[1.27]
.100
[2.54]
.290
[7.37]
.347
[8.81]
.159
[4.04]
Typ.
.125
[3.18]
.040
[1.02]
Max.
Post No. 1
.100
[2.54]
.050
[1.27]
.125
[3.18]
.347
[8.81]
.159
[4.04]
.100
[2.54]
Typ.
Post No. 1
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position surface mount polarized header
would be:
Base number 647106 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-647106-0
All part numbers are the RoHS
equivalent version. Example:
2
12
.250
[6.35]
.025
[0.64]
Sq.
.070
[1.78]
Post No. 1
Header Ordering
Information
No. of
Pos.
Maximum Temperature Rating: 2–12 Position: 280°C
13–18 Position: 235°C
MTA-100
.100 [2.54]
Housing —
2–12 Position — UL94V-0 rated,
nylon, black
13–18 Position — UL94V-0 rated,
LCP, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Lead Free
RoHS
Prefix/Suffix
3-647106-2
4-647106-2
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
.060
[1.52]
.235
[5.97]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
.070
[1.78]
Recommended PC Board Layout for use with .010 [0.25] Thick Stencil
Base Part Numbers
Polarized Headers
Header
RoHS
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
647106
32-42
Friction Lock Headers
Header
RoHS
Part Nos.
Equiv.
647166
32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
647108
32-42
647168
32-42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647107
32-42
647167
32-42
Tape Mount Part Numbers
Polarized Headers
Header
RoHS
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
647531
32-42
Friction Lock Headers
Header
RoHS
Part Nos.
Equiv.
647502
32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
1744163
32-42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647467
32-42
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or
product manager for details.
29
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Shrouded Headers—Straight and Right-Angle
Material and Finish
Straight Post (.025 [0.64] Square)
Housing — UL94V-0 rated, polyester,
black
Posts — Copper alloy, tin plated; or
.000030 [0.00076] gold over nickel
Post No. 1
Post No. 1
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Headers with .000015 [0.00038]
gold plated post are available
upon request. Minimums may
apply.
3. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
MTA-100
.100 [2.54]
Right-Angle (.025 [0.64] Square)
A
A
.313
[7.95]
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14 and 15.
.025
[0.64]
Typ.
.092
[2.34]
Typ. Ref.
.100
[2.54]
Header Ordering
Information
.313
[7.95]
.410
[10.41]
.200
[5.08]
.140
[3.56]
.125
[3.18]
.410
[10.41]
.440
[11.18]
.025
[0.64]
Typ.
.130
.092
[2.34] [3.30]
Typ. Ref.
.137
[3.48]
Ref.
.100
[2.54]
.176
[4.47]
Ref.
.107
[2.72]
Ref.
.200
[5.08]
.050
[1.27]
Max.
.176
[4.47]
Ref.
Front Bend
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts and
with pegs would be:
Base number 644486 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-644486-0
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Notes:
1. Select load headers (omitted pin
headers) are available upon
request. Please contact product
engineer or product manager for
details.
2. MTA-100 shrouded headers
do not mate with CST-100 II housings.
.206
[5.23]
Ref.
Polarized
Retention Peg
.125
[3.18]
Min.
.300
[7.62]
Max.
.042
[1.07]
Edge of Board
.130
[3.30]
Ref.
Edge of Board
Rear Bend
.124
[3.15]
.100
[2.54]
Typ.
.050/.040
Dia.
[1.27/1.02]
.050/.040
Dia.
[1.27/1.02]
.100
[2.54]
Typ.
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
.081/.075
Dia.
[2.06/1.91]
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
(Solder Side of Board Shown)
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
(Solder Side of Board Shown)
Base Part Numbers
Straight Posts
Header
Part Nos.
RoHS
Equiv.
Right-Angle Posts
Without Pegs Only
Front Bend
Rear Bend
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
644861
22-34
644488
22-34
644803
22-34
—
644489
22-34
—
—
With
Pegs
Header
Part Nos.
Without
Pegs
RoHS
Equiv.
Standard UL94V-0, Tin Plated
644486
22-34
Standard UL94V-0, .000030 [0.00076] Gold Plated
644487
22-34
—
Header Length
No. of
Circuits
2
3
4
5
Dim.
A
.284
7.21
.384
9.75
.484
12.29
.584
14.83
Prefix/
Suffix
No. of
Circuits
3- -2
6
3- -3
7
3- -4
8
3- -5
9
Dim.
A
.684
17.37
.784
19.91
.884
22.45
.984
24.99
Prefix/
Suffix
No. of
Circuits
3- -6
10
3- -7
11
3- -8
12
3- -9
13
Dim.
A
1.084
27.53
1.184
30.07
1.284
32.61
1.384
35.15
Prefix/
Suffix
No. of
Circuits
4- -0
14
Dim.
A
1.484
37.69
Prefix/
Suffix
4- -4
4- -1
4- -2
4- -3
30
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.100 [2.54] Centerline CST-100 II Crimp Contacts and Housings
Product Facts
Application Tooling
Low cost wire-to-board
interconnections
■
Wide wire range for single
contact
■
Tin and gold plated
contacts
■
Mates with specified MTA
and similar competitive
notched headers
■
Plastic latching feature in
housing helps prevent contact backout
■
Locking ramps and polarizing tabs are standard
■
For keying purposes use
keying plug 641994-1
(page 17)
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■
Certified by Canadian
Standards
®
Association,
File No. LR7189
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 21 thru 29 and 32.
See page 15 for an explanation of
RoHS lead free equivalents.
Loose Piece Contacts —
Hand Tool No. 58517-3 (408-4064)
Strip Contacts —
AMP-O-LECTRIC Model “G”
Termination Machine*
Applicator No. 567373-3
(Request Catalog 65828)
AMP-O-MATIC Stripper-Crimper
Machine* Applicator No. 567910-1 or
567827-1 (with CQM) (Request Catalog
65004)
AMPOMATOR CLS IIIG Lead Making
Machine* (Request Catalog 82659)
*Requires applicators. For part
numbers, call Technical Support.
Contacts
Part Numbers
Tin Plated
15 Au Gold Plated
30 Au Gold Plated
1375819-1 (Strip)
1375819-2 (Strip)
1375819-3 (Strip)
1445336-1 (Loose Piece) 1445336-2 (Loose Piece) 1445336-3 (Loose Piece)
Phosphor bronze, pretinned or .000015 [.00038] gold, over nickel
.000030 [0.00076] gold over nickel
Wire Range — 22–26 AWG [0.35–0.13 mm2]
Max. Ins. Dia. — .065 [1.65]
Housing*
Material (RoHS Compliant)
UL94V-0 rated, nylon, white
No. of
Pos.
3
4
5
Performance Data
6
7
8
9
10
11
Technical Documents
Product Specification
108-1948
Application Specification
114-13036
Instruction Sheet
408-8493
.440
[11.17]
.016±.002
[.406±.051]
Material and Finish (RoHS Compliant)
2
Voltage Rating — 250 vac
Current Rating — 4 amp max.
Low-Level Resistance — 6 m⍀
max. initial; 10 m⍀ max. final
Insulation Resistance — 1000 M⍀
min. initial; 100 M⍀ min. final
Operating Temperature —
⫺55⬚ C to ⫹105⬚ C
.195
[4.95]
CST-100 II
.100 [2.54]
■
12
13
14
15
Dim.
A
.220
5.59
.320
8.13
.420
10.67
.520
13.21
.620
15.75
.720
18.29
.820
20.83
.920
23.37
1.020
25.91
1.120
28.45
1.220
30.99
1.320
33.53
1.420
36.07
1.520
38.61
Part
Numbers
No. of
Pos.
1375820-2
16
1375820-3
17
1375820-4
18
1375820-5
19
1375820-6
20
1375820-7
21
1375820-8
22
1375820-9
23
1-1375820-0
24
1-1375820-1
25
1-1375820-2
26
1-1375820-3
27
1-1375820-4
28
Dim.
A
1.620
41.15
1.720
43.69
1.820
46.23
1.920
48.77
2.020
51.31
2.120
53.85
2.220
56.39
2.320
58.93
2.420
61.47
2.520
64.01
2.620
66.55
2.720
69.09
2.820
71.63
Part
Numbers
.100
[2.54]
Typ.
1-1375820-6
1-1375820-7
.060
[1.52]
Typ.
1-1375820-8
1-1375820-9
2-1375820-0
A
2-1375820-1
.510
[12.95]
2-1375820-2
2-1375820-3
.260
[6.60] .190
Ref. [4.83]
2-1375820-4
2-1375820-5
2-1375820-6
2-1375820-7
2-1375820-8
*Housings without polarizing tabs
may be manufactured upon
request. Minimums may apply.
Contact product engineering or
product manager for details.
1-1375820-5
31
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
CST-100 II Shrouded Headers—Straight and Right-Angle
Material and Finish
Straight Post (.025 [0.64] Square)
Right-Angle (.025 [0.64] Square)
Housing — UL94V-0 rated, polyester,
black
Posts — Copper alloy, tin plated; or
.000030 [0.00076] gold over nickel
Post No. 1
Post No. 1
CST-100 II
.100 [2.54]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Headers with .000015 [0.00038]
gold plated posts are available
upon request. Minimums may
apply.
3. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
page 31.
A
A
.313
[7.95]
.025
[0.64]
Typ.
.092
[2.34]
Ref.
.100
[2.54]
.410
[10.41]
.280
[7.11]
.140
[3.56]
.125
[3.18]
No. of
Pos.
2
14
Lead Free
RoHS
Prefix/Suffix
3-644893-2
thru
4-644893-4
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
CST-100 II shrouded headers only
mate with CST-100 II housings. All
the MTA-100 headers except the
MTA-100 shrouded headers mate
with CST-100 II housings.
.280
[7.11]
.036
.520 [0.91]
Max.
[13.21]
.107
[2.72]
Ref.
.025
[0.64]
Typ.
.140
[3.56]
.100
[2.54]
.042
[1.07]
Edge of Board
.050/.040
Dia.
[1.27/1.02]
.107
[2.72]
Ref.
.176
[4.47]
Ref.
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Polarized
Retention Peg
.125
[3.18]
Min.
.092
[2.34]
Typ.
.176
[4.47]
Ref.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts and
with pegs would be:
Base number 644893 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-644893-0
All part numbers are the RoHS
equivalent version. Example:
.313
[7.95]
.450
[11.43]
Max.
.124
[3.15]
.100
[2.54]
Typ.
Edge of Board
.050/.040
Dia.
[1.27/1.02]
.081/.075
Dia.
[2.06/1.91]
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
(Solder Side of Board Shown)
.100
[2.54]
Typ.
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
(Solder Side of Board Shown)
Base Part Numbers
Straight Posts
With
Pegs
Right-Angle Posts
Without Pegs Only
Without
Pegs
Header
Part Nos.
No. of
Posts/
RoHS Equiv.
Header
Part Nos.
No. of
Posts/
RoHS Equiv.
644892
32-44
644894
32-44
Standard UL94V-0, .000030 [0.00076] Gold Plated
644897
32-44
644896
32-44
644898
32-44
Header
Part Nos.
No. of
Posts/
RoHS Equiv.
Standard UL94V-0, Tin Plated
644893
32-44
Header Length
No. of
Circuits
2
3
4
Dim.
A
.284
7.21
.384
9.75
.484
12.29
Prefix/
Suffix
No. of
Circuits
3- -2
5
3- -3
6
3- -4
7
Dim.
A
.584
14.83
.684
17.37
.784
19.91
Prefix/
Suffix
No. of
Circuits
3- -5
8
3- -6
9
3- -7
10
Dim.
A
.884
22.45
.984
24.99
1.084
27.53
Prefix/
Suffix
3- -8
3- -9
4- -0
32
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.156 [3.96] Centerline MTA-156 IDC Connectors and Headers
Product Facts
Connectors and headers for
2 through 24 positions; wire
sizes of 18, 20, 22, 24 and
26 AWG [0 .9– 0.12 mm2]
■
Connectors and headers,
except shrouded headers,
are end-to-end stackable
■
Quad Connectors for higher
current rating (page 54)
■
Posted connectors for 2, 3,
4, 6, 9,12,15 and 24 positions
■
Card edge connectors for
3, 6, 9,12,15,18 and 20
through 24 positions
■
Connectors preloaded with
IDC contacts
■
All contacts are slotted for
insulation displacement
(IDC) termination technique
■
Connector styles include
both closed end and feedthru, with and without locking ramps and polarizing
tabs
■
Molded ribs on housing do
not allow reverse mating
■
Contacts are lubricated for
fretting corrosion protection
■
Benefits derived from the
MTA-156 system include
increases quality and ease
of handling such as —
■ One-step assembly
■ No wire stripping
■ No contact damage
■ Reduced wiring errors
■ Simpler tooling
■ Simple maintenance
and repair
■
■
Meets the material requirements of Table 23.1 of
UL 1410 Standards for
Television Receiver and
Video Products (wire-topost connectors only)
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
■
Certified by Canadian
Standards
Association,
File No. LR7189
MTA-156
.156 [3.96]
■
MTA-156 connectors
accept discrete and ribbon
cable wire sizes ranging
from 18 – 26 AWG
[0.9– 0.12 mm2] with maximum insulation outside
diameter.095 [2.41] for single wire and .070 [1.78] for
mass termination of wires.
Tin plated solid, fused
stranded or stranded (7, 16,
and 19 strands) wire with
PVC insulation can be used
on 18 AWG [0.8 – 0.9 mm2]
MTA-156 connectors; 7, 10,
and 19 stranded wire on
20 AWG [0.5 – 0.6 mm2 ]
MTA-156 connectors; and 7
and 19 stranded wire on
22 – 26 AWG [0.4 – 0.12 mm2]
MTA-156 connectors.
The wire-to-post connector
housing material is flame
retardant thermoplastic,
either UL94V-2 or UL94V-0
rated.
A full line of .156 [3.96]
centerline headers completes the system. Headers
are available with straight
or right-angle posts, in flat
friction lock and shrouded
styles. Headers are available
in 2 through 24 positions.
Performance Data*
Voltage Rating — 600 vac
Current Rating —
7 amp max. for MTA-156 Connector
Low-Level Resistance —
3.0 m⍀ max. initial
Dielectric Withstanding Voltage —
2200 vac/1 min.
Insulation Resistance —
5000 M⍀ min. initial
Operating Temperature —
⫺55⬚ C to ⫹105⬚ C
*Refer to the Product Specification
for additional electrical, mechanical
and environmental performance
tests and requirements.
Only one wire to be terminated into an IDC contact
slot.
Technical Documents
Mass termination of wire
provides the lowest applied
cost because it drastically
reduces the labor content
of virtually any cable or harness assembly required.
Application Specifications
114-1020 MTA-156 Connectors,
Posted Connectors and
Card Edge Connectors
Product Specification
108-1051 MTA-156 Connectors
Note: Refer to page 70 for approved
wire listings.
114-1032
MTA-156 Ribbon Cable
Assembly
R
33
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Matrix for Tin Plated
Part Numbers
Connectors
MTA-156
.156 [3.96]
This matrix has been
prepared to assist you,
our customer, in defining the correct mating
halves for the MTA-156
header and connector
combination. Where a
“Y” is indicated the
combination is a valid
mating pair. Where an
“N” is indicated the
combination is not
acceptable for mating.
640426
640427
640428
640429
640430
640431
640432
640433
640434
640435
640472
640473
640474
640475
640476
640477
640478
640479
640480
640481
640595
640599
640600
640601
640602
640604
640605
640606
640607
640608
641301
641302
641303
641304
641305
641306
641307
641308
641309
641310
643817
643818
643819
643820
643821
644082
644461
644462
644463
644464
644465
644466
644467
644468
644469
644470
644471
644472
644501
644502
644566
644567
644569
644570
644572
644783
644791
644860
644878
6403
84
6403
85
6403
87
6403
88
6403
89
6404
45
6446
11
6446
12
6446
13
6446
14
6446
15
6446
16
6446
17
6447
49
6447
50
6447
51
6447
52
6447
53
6447
54
6447
55
6471
23
6471
24
6471
25
6471
26
6471
27
6471
28
6471
29
6471
30
6472
10
6472
11
6472
12
6472
27
6472
28
6472
29
6472
30
6476
46
6476
48
1744
017
83
6403
MTA-156 Connector/
Header Mateability
Guide
He a d
e rs
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
34
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Connector/Header Mateability Guide (Continued)
This matrix has been prepared to assist you, our customer, in defining the correct mating
halves for the MTA-156 header and connector combination. Where a “Y” is indicated the
combination is a valid mating pair. Where an “N” is indicated the combination is not
acceptable for mating.
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
6412
07
6412
08
6412
09
6412
10
6446
27
6446
28
6446
29
6446
30
6446
31
6446
32
6446
33
6447
56
6447
57
6447
58
6447
59
6447
60
6447
61
6447
62
6471
31
6471
32
6471
33
6471
34
6471
35
6471
36
6412
02
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
6412
6412
Connectors
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
MTA-156
.156 [3.96]
641217
641218
641219
641220
641221
641222
641223
641224
641225
641226
641227
641228
641229
641230
641231
641232
641233
641234
641235
641236
644460
644662
644663
644687
644718
644720
03
04
Headers
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
6411
18
6411
19
6411
20
6411
21
6447
63
6447
64
6447
65
6447
66
6447
67
6447
68
6447
69
6471
39
6471
40
6471
41
6471
42
6471
43
6471
44
6476
49
15
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
6411
14
Connectors
641148
641149
641150
641151
641152
641153
641154
641155
641156
641157
641168
641169
641170
641171
641172
641173
641174
641175
641176
641177
644284
647478
647479
647496
6411
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
6411
13
Headers
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
35
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Connectors—Closed End
Material and Finish
Closed End with Locking Ramp
Housing — UL94V-2 rated, nylon,
see below for color; or UL94V-0 rated,
nylon, black
Contacts — Phosphor bronze, post tin
plated, .000030 [0.00076] or .000015
[.00038] post gold plated over nickel
.245
[6.22]
.050
[1.27]
.725
[18.42]
.156
Typ.
[3.96]
without Polarizing Tabs
.100
[2.54]
.258
[6.56]
All Wire Sizes in UL94V-0 —
Black
Notes:
1. Only connectors with locking
ramp and without polarizing tabs
mate with posted connectors on
page 45.
2. Refer to pages 70 thru 74 for
approved wire listing.
3. For strain reliefs and dust covers,
see pages 40 and 41.
4. For keying plugs and panel
mount end caps, see page 42.
5. Other circuit sizes are available
upon request. Minimums
may apply.
6. Connector circuits can be
molded closed for keying purposes. Minimums may apply.
7. Where no part numbers appear
in the chart, parts can be made
available upon request.
Minimums may apply.
8. To determine connector overall
length (Dim. A), multiply .156 x
the number of circuits. Example:
.156 x 10 circuits equals 1.560
inches [39.62 mm].
.097
[2.46]
.230
[5.84]
.355 .325
[9.02] [8.26]
Color Coding by Wire Size for
UL94V-2 Connectors
26 AWG — Blue
24 AWG — White
22 AWG — Red
20 AWG — Yellow
18 AWG — Orange
MTA-156
.156 [3.96]
A
.100
[2.54]
with Polarizing Tabs
.050
[1.27]
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Closed End Connectors with Locking Ramp, see pages 45 thru 48,
50, 52, and 53, (49 and 51 Front Bend Headers Only).
Closed End without Locking Ramp
.245
[6.22]
A
.047
[1.19]
.355 .325
[9.02] [8.26]
.180
[4.57]
.050
[1.27]
.725
[18.42]
.156
Typ.
[3.96]
without Polarizing Tabs
.100
[2.54]
.258
[6.56]
with Polarizing Tabs
.050
[1.27]
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Closed End Connectors without Locking Ramp, see pages 46 thru 53.
36
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Connectors—Closed End (Continued)
Connector Ordering
Information
Base Part Numbers
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described connectors.
Base number 640426 plus
prefix-and-suffix
4- — -0
The correct ordering number
is
4-640426-0
All part numbers in bold face
are the RoHS equivalent
version. Example:
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Lead Free
RoHS
Prefix/Suffix
3-640426-2
3-640426-3
3-640426-4
3-640426-5
3-640426-6
3-640426-7
3-640426-8
3-640426-9
4-640426-0
4-640426-1
4-640426-2
4-640426-3
4-640426-4
4-640426-5
4-640426-6
4-640426-7
4-640426-8
4-640426-9
5-640426-0
5-640426-1
5-640426-2
5-640426-3
5-640426-4
Connector Type
& Wire Size
Connector
Part
Nos.
Standard UL94V-2, Tin Plated
18 AWG
640426
0.8–0.9 mm2
20 AWG
640427
0.5–0.6 mm2
22 AWG
640428
0.3–0.4 mm2
24 AWG
640429
0.2 mm2
26 AWG
640430
0.12–0.15 mm2
Connector
RoHS
Equiv.
32–54
32–54
Connector
Part
RoHS
Nos.
Equiv.
643817
643818
32–54
32–54
Connector
Part
Nos.
RoHS
Equiv.
Part
Nos.
640431
32–54
644461
640432
32–54
RoHS
Equiv.
1
32–44
1
32–44
1
644462
32–54
643819
32–54
640433
32–54
644463
32–44
32–54
643820
32–54
640434
32–54
6444641
32–44
32–54
643821
32–54
640435
32–54
—
—
644878
32–54
640477
32–54
—
—
—
—
640478
32–54
—
—
644783
32–54
640479
32–54
6447911
32–44
—
—
640480
32–54
—
—
—
—
640481
32–54
—
—
32–42
641222
32–54
—
—
32–42
641223
32–54
—
Tape Mounted on Reel UL94V-2, Tin Plated
18 AWG
640472
32–54
0.8–0.9 mm2
20 AWG
640473
32–54
0.5–0.6 mm2
22 AWG
640474
32–54
0.3–0.4 mm2
24 AWG
640475
32–54
0.2 mm2
26 AWG
640476
32–54
0.12–0.15 mm2
Standard UL94V-2, .000030 [0.00076] Gold Plated
1
18 AWG
641217
32–54
644460
0.8–0.9 mm2
20 AWG
641218
32–54
6446631
0.5–0.6 mm2
22 AWG
641219
32–54
6446621
0.3–0.4 mm2
24 AWG
641220
32–54
—
0.2 mm2
26 AWG
641221
32–54
—
0.12–0.15 mm2
Standard UL94V-2, .000015 [0.00038] Gold Plated
1
18 AWG
641148
32–54
644284
0.8–0.9 mm2
20 AWG
641149
32–54
—
0.5–0.6 mm2
22 AWG
641150
32–54
6474781
0.3–0.4 mm2
24 AWG
641151
32–54
—
0.2 mm2
26 AWG
641152
32–54
—
0.12–0.15 mm2
Standard UL94V-0, Tin Plated (Black in color)
1
18 AWG
32–42
644860
0.8–0.9 mm2
22 AWG
—
—
0.3–0.4 mm2
1
Closed End without Locking Ramp
Without Tabs
With Tabs
—
—
—
1
32–42
641224
32–54
644687
—
641225
32–54
—
—
—
641226
32–54
—
—
32–42
641153
32–54
—
—
—
641154
32–54
—
—
32–42
641155
32–54
—
—
—
641156
32–54
—
—
—
641157
32–54
—
—
—
6445021
32–42
6440821
32–42
—
1
32–42
1
32–42
644501
MTA-156
.156 [3.96]
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
10-position closed end connector with locking ramp
and without polarizing tabs
for 18 AWG wire would be:
Closed End with Locking Ramp
Without Tabs
With Tabs
644566
32–44
Other circuit sizes are available upon request. Minimums may apply.
Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for
details. Minimums may apply.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
37
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Connectors—Feed-Thru
Material and Finish
Feed-Thru with Locking Ramp
Housing — UL94V-2 rated, nylon,
see below for color; or UL94V-0 rated,
nylon, black
Contacts — Phosphor bronze; post tin
plated, .000030 [.00076] or .000015
[.00038] post gold plated over nickel
.245
[6.22]
A
.100
[2.54]
.097
[2.46]
.385 .325
[9.78] [8.26]
.050
[1.27]
.725
[18.42]
Color Coding by Wire Size for
UL94V-2 Connectors
26 AWG — Blue
24 AWG — White
22 AWG — Red
20 AWG — Yellow
18 AWG — Orange
MTA-156
.156 [3.96]
.230
[5.84]
without Polarizing Tabs
.100
[2.54]
.258
[6.56]
All Wire Sizes in UL94V-0 —
Black
Notes:
1. Only connectors with locking
ramp and without polarizing tabs
mate with posted connectors on
page 45.
2. Refer to pages 70 thru 74 for
approved wire listing.
3. For strain reliefs and dust covers,
see pages 40 and 41.
4. For keying plugs and panel
mount end caps, see page 42.
5. Other circuit sizes are available
upon request. Minimums
may apply.
6. Connector circuits can be
molded closed for keying purposes. Minimums may apply.
7. Where no part numbers appear
in the chart, parts can be made
available upon request.
Minimums may apply.
8. To determine connector overall
length (Dim. A), multiply .156 x
the number of circuits. Example:
.156 x 10 circuits equals 1.560
inches [39.62 mm].
.156
Typ.
[3.96]
.050
[1.27]
with Polarizing Tabs
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Feed–Thru Connectors with Locking Ramp, see pages 45 thru 48,
50, 52, and 53, (49 and 51 Front Bend Headers Only).
Feed-Thru without Locking Ramp
.245
[6.22]
A
.047
[1.19]
.325
.385
[9.78] [8.26]
.180
[4.57]
.050
[1.27]
.725
[18.42]
.156
Typ.
[3.96]
without Polarizing Tabs
.100
[2.54]
.258
[6.56]
.050
[1.27]
with Polarizing Tabs
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Feed–Thru Connectors without Locking Ramp, see pages 46 thru 53.
38
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Connectors—Feed-Thru (Continued)
Connector Ordering
Information
Base Part Numbers
The “Base Part Numbers”
Chart at right shows the
base part number and number of circuits available for
the described connectors.
Base number 640599 plus
prefix-and-suffix
4- — -0
The correct ordering number
is
4-640599-0
The part numbers in bold
face are the RoHS equivalent version. Example:
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Lead Free
RoHS
Prefix/Suffix
3-640599-2
3-640599-3
3-640599-4
3-640599-5
3-640599-6
3-640599-7
3-640599-8
3-640599-9
4-640599-0
4-640599-1
4-640599-2
4-640599-3
4-640599-4
4-640599-5
4-640599-6
4-640599-7
4-640599-8
4-640599-9
5-640599-0
5-640599-1
5-640599-2
5-640599-3
5-640599-4
Connector Type
& Wire Size
Connector
Part
Nos.
Standard UL94V-2, Tin Plated
18 AWG
640599
0.8–0.9 mm2
20 AWG
640600
0.5–0.6 mm2
22 AWG
640601
0.3–0.4 mm2
24 AWG
640602
0.2 mm2
26 AWG
640595
0.12–0.15 mm2
Connector
RoHS
Equiv.
32–54
32–54
32–54
1
644465
1
644466
1
644467
1
32–44
32–44
32–44
Connector
Part
Nos.
RoHS
Equiv.
Part
Nos.
640604
32–54
644469
1
32–44
644470
1
32–44
644471
1
32–44
1
32–44
640605
640606
32–54
32–54
RoHS
Equiv.
644468
32–44
640607
32–54
644472
32–54
—
—
640608
32–54
—
—
—
—
641306
32–54
—
—
—
—
641307
32–54
—
—
—
—
641308
32–54
—
—
—
—
641309
32–54
—
—
—
—
641310
32–54
—
—
644718
32–44
641232
32–54
—
—
—
—
641233
32–54
—
—
644720
32–44
641234
32–54
—
—
—
—
641235
32–54
—
—
—
—
641236
32–54
—
—
647479
32–42
641173
32–54
—
—
—
—
641174
32–54
—
—
647496
32–42
641175
32–54
—
—
—
—
641176
32–54
—
—
—
—
641177
32–54
—
—
—
—
644567
1
32–42
644570
Standard UL94V-2, .00003 [.00076] Gold Plated
18 AWG
641227
32–54
0.8–0.9 mm2
20 AWG
641228
32–54
0.5–0.6 mm2
22 AWG
641229
32–54
0.3–0.4 mm2
24 AWG
641230
32–54
0.2 mm2
26 AWG
641231
32–54
0.12–0.15 mm2
Standard UL94V-2, .000015 [.00038] Gold Plated
18 AWG
641168
32–54
0.8–0.9 mm2
20 AWG
641169
32–54
0.5–0.6 mm2
22 AWG
641170
32–54
0.3–0.4 mm2
24 AWG
641171
32–54
0.2 mm2
26 AWG
641172
32–54
0.12–0.15 mm2
1
Connector
Part
RoHS
Nos.
Equiv.
32–54
Tape Mounted on Reel UL94V-2, Tin Plated
18 AWG
641302
32–54
0.8–0.9 mm2
20 AWG
641303
32–54
0.5–0.6 mm2
22 AWG
641304
32–54
0.3–0.4 mm2
24 AWG
641305
32–54
0.2 mm2
26 AWG
641301
32–54
0.12–0.15 mm2
Standard UL94V-0, Tin Plated
18 AWG
—
0.8–0.9 mm2
22 AWG
—
0.3–0.4 mm2
Feed-Thru without Locking Ramp
Without Tabs
With Tabs
—
—
1
1
1
1
—
—
1
644569
32–42
1
32–42
1
32–42
644572
MTA-156
.156 [3.96]
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
10-position feed-thru connector with locking ramp
and without polarizing tabs
for 18 AWG wire would be:
Feed-Thru with Locking Ramp
Without Tabs
With Tabs
Other circuit sizes are available upon request. Minimums may apply.
Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for
details. Minimums may apply.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
39
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Connector Accessories
Closed End Covers
Strain Relief Covers
Dust Covers
Retention Dimple
.335
[8.51]
Material (RoHS Compliant)
.440
[11.18]
Strain Relief Covers — UL94V-2
rated, nylon, white
Dust Covers — UL94V-0 rated,
polyester, white
.440
[11.18]
.335
[8.51]
.127
[3.23]
.105
[2.67]
.130
[3.30]
A
A
MTA-156
.156 [3.96]
Base Part Numbers
Closed End
Strain Relief
Dust
Covers
Covers
Cover
No. of
Cover
No. of
Part Nos.
Circuits
Part Nos.
Circuits
643067
2–24
640551
2–24
Note: This portion of front locking bar
may or may not be present
Feed-Thru Covers
Strain Relief Covers
Dust Covers
Retention Dimple
Material (RoHS Compliant)
.470
[11.94]
Strain Relief Covers — UL94V-2
rated, nylon, white
Dust Covers — UL94V-0 rated,
polyester, white
.475
[12.07]
.325
[8.26]
.127
[3.23]
.130
[3.3]
A
A
Base Part Numbers
Note: This portion of front locking bar
may or may not be present
Cover Ordering Information
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described cover.
Prefixes and suffixes are
determined by the number
of circuit positions in the
cover. For example, the
complete part number for a
10-position closed-end
strain relief cover would be:
Base number 643067 plus
Feed-Thru
Strain Relief
Dust
Covers
Covers
Cover
No. of
Cover
No. of
Part Nos.
Circuits
Part Nos.
Circuits
643071
2–24
640643
2–24
Cover Length
No. of
Circuits
2
3
4
5
prefix-and-suffix
6
1- — -0
7
The correct ordering number
is
8
1-643067-0
9
Dim.
A
.312
7.92
.468
11.89
.624
15.85
.780
19.81
.936
23.77
1.092
27.74
1.248
31.7
1.404
35.66
Prefix/
Suffix
No. of
Circuits
-2
10
-3
11
-4
12
-5
13
-6
14
-7
15
-8
16
-9
17
Dim.
A
1.560
39.62
1.716
43.59
1.872
47.55
2.028
51.51
2.184
55.47
2.340
59.44
2.496
63.4
2.652
67.36
Prefix/
Suffix
No. of
Circuits
1- -0
18
1- -1
19
1- -2
20
1- -3
21
1- -4
22
1- -5
23
1- -6
24
Dim.
A
2.808
71.32
2.964
75.29
3.120
79.25
3.276
83.21
3.432
87.17
3.588
91.14
3.744
95.1
Prefix/
Suffix
1- -8
1- -9
2- -0
2- -1
2- -2
2- -3
2- -4
1- -7
40
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Connector Accessories (Continued)
Replacement IDC Contacts
.125
[3.18]
Wire Size
AWG
mm2
Material and Finish
Contacts — Phosphor bronze, post tin
plated; .000030 [0.00076] or .000015
[0.00038] post gold plated over nickel
.637
[16.18]
18
20
22
24
26
Note: Tyco Electronics does not recommend terminating an MTA
contact more than one time.
Use replacement contacts
when required for field repairs
or wire changes.
0.8–0.9
0.5–0.6
0.3–0.4
0.2
0.12–0.15
Tin Plated
640631-3
640632–3
640633-3
640634-3
640635-3
Part Numbers
.000030 [0.00076]
Gold Plated
641143-4
641144-4
641145-4
641146-4
641147-4
.000015 [0.00038]
Gold Plated
641143-3
641144-3
641145-3
641146-3
641147-3
MTA-156
.156 [3.96]
Crimp Snap-in Contacts
Wire Size
AWG
mm2
26–22 .12–0.3
22–18 0.3–0.9
.580
[14.73]
Material and Finish
Contacts — Phosphor bronze,
tin plated
.105
[2.67]
.110
[2.79]
.165 Max.
[4.19]
Part Nos.
Loose Piece*
640557-3
640559-3
Strip**
640556-3
640558-3
**Hand Tool No. 59837-1 (408-6528)
**AMP-O-LECTRIC Model “G” Termination
Machine (Request Catalog 65828)
Note: Requires applicator. For part number,
call Technical Support.
Special applications for crimp snap-in contacts are:
1. Double wire per contact
2. Coax or shielded wire
3. Mixed wire size in same connector
Note: Only one crimp snap-in contact per connector.
41
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Connector Accessories (Continued)
Keying Plugs
Material (RoHS Compliant)
Loose Piece
Part No. 640629-1 (Flush)
Used with keyed headers
UL94V-2 rated, nylon, natural color
Note: Removal of contact is not
necessary when using keying plug.
On Carrier Strip
Part No. 641623-1 (Flush)
(10 per strip)
.300
[7.62]
.066
[1.68]
.500
[12.70]
Ref.
.065
[1.65]
.051
[1.30]
.085
[2.16]
Flush
2.525
[64.14]
Ref.
MTA-156
.156 [3.96]
Part No. 640630-1 (Long Nose)
Used with staked post
.300
[7.62]
.375
[9.52]
.051
[1.30]
.300
[7.62]
Ref.
.065
[1.65]
.125
[3.18]
.066
[1.68]
Long Nose
.070 Dia.
[1.78]
Panel Mount End Caps
Part No. 641440-1
Part No. 641533-1
(2-position only)
Material (RoHS Compliant)
Notes:
1. Both left-hand and right-hand
end caps are attached by a connecting tab. This tab must be
broken off prior to installing on
connector.
2. For best results attach panel
mount end caps to the MTA-156
(IDC) connectors shown on pages
36 thru 39. While not preferred,
panel mount end caps can be
attached to MTA-156 (IDC)
posted connector on page 45.
No. of
Pos.
3
4
6
9
12
15
24
.564
[14.33]
.550
.410 [13.97]
[10.41]
UL94V-2 rated, nylon, black
Dim.
A
.736
18.69
.892
22.66
1.204
30.58
1.672
42.47
2.140
54.36
2.608
66.24
4.012
101.9
.440
[11.18]
.520
[13.2] .440
[11.18]
.520
[13.2]
Two-Position Only
641533-1
3- thru 24-Position
641440-1
See Note 1
.578
[14.7]
A
.453
[11.5]
.010
[.254]
Max. R. Typ.
at Min.
Tolerance
Cutout
.010
[.254]
Max. R. Typ. at Min.
Tolerance Cutout
.453
[11.5]
Recommended Panel Cutout
(Recommended Panel Thickness .062 [1.57] to .067 [1.70] max.)
42
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
6414
35
6414
36
6414
37
6414
38
6414
39
6415
22
6415
23
6415
24
6415
25
6415
26
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Posted
Connector/Connector
Mateability Guide
Matrix for Tin Plated
Part Numbers
Connectors
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
640481
640595
640599
640600
640601
640602
640604
640605
640606
640607
640608
641301
641302
641303
641304
641305
641306
641307
641308
641309
641310
643817
643818
643819
643820
643821
644082
644461
644462
644463
644464
644465
644466
644467
644468
644469
644470
644471
644472
644501
644502
644566
644567
644569
644570
644572
644783
644791
644860
644878
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
MTA-156
.156 [3.96]
This matrix has been prepared to assist you, our
customer, in defining the
correct mating halves for
the MTA-156 posted connector and connector combination. Where a “Y” is
indicated the combination
is a valid mating pair.
Where an “N” is indicated
the combination is not
acceptable for mating.
640426
640427
640428
640429
640430
640431
640432
640433
640434
640435
640472
640473
640474
640475
640476
640477
640478
640479
640480
Posted
Connectors
43
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Posted Connector/Connector Mateability Guide (Continued)
This matrix has been prepared to assist you, our customer, in defining the correct mating
halves for the MTA-156 posted connector and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is
not acceptable for mating.
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Connectors
MTA-156
.156 [3.96]
6448
07
6448
09
6448
12
6448
14
Posted Connectors
641217
641218
641219
641220
641221
641222
641223
641224
641225
641226
641227
641228
641229
641230
641231
641232
641233
641234
641235
641236
644460
644662
644663
644687
644718
644720
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
Posted Connectors
Connectors
6439
95
6474
76
6474
81
6474
97
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
641148
641149
641150
Y Y Y Y
Y Y Y Y
Y Y Y Y
641151
641152
641153
641154
641155
641156
641157
641168
641169
641170
641171
641172
641173
641174
641175
641176
641177
644284
647478
647479
647496
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
44
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Posted Connectors (Wire-to-Wire)—Closed End, Feed-Thru
Material and Finish
Closed End
4
Housing — UL 94V-2 rated, nylon,
see chart for color
Contacts — Copper alloy, post tin or
.000030 [.00076] gold plated over
nickel
Feed-Thru
3
B
Dim.
1
2
B
Dim.
A Dim.
.105
[2.67]
± .010
[ ± 0.25 ]
1.010
[25.65]
A Dim.
.105
[2.67]
± .010
[ ± 0.25 ]
1.010
[25.65]
.156
[3.96]
.156
[3.96]
.487
.355 [12.37]
[9.02] Ref.
.370
[9.4]
.487
.385 [12.37]
[9.78] Ref.
.370
[9.4]
MTA-156
.156 [3.96]
.045
[1.14] Sq.
.045
[1.14] Sq.
Base Part Numbers
Notes:
1. Mating half visuals - pages 36 thru 39.
2. Strain relief & dust covers - pages 40
& 41.
3. Approved wire listing - page 70.
Connector Ordering
Information
The “Base Part Numbers” Chart
at right shows the base part
number and number of circuits
available for the described
connectors.
Prefixes and suffixes are determined by the number of circuit
positions in the connector. For
example, the complete part
number for a 12-position
closed end connector for
18 AWG wire would be:
Base number 641435 plus
prefix-and-suffix
4- — -2
The correct ordering number is
4-641435-2
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Closed End Connector1
Connector Type
& Wire Size
Standard UL 94V-2, Tin Plated
18 AWG
0.8-0.9 mm2
20 AWG
0.5-0.6 mm2
22 AWG
0.3-0.4 mm2
24 AWG
0.2 mm2
26 AWG
0.12-0.15 mm2
1
Part Nos.
RoHS Equiv.
641435
32, 33, 34, 36, 39, 42, 45, 54
641522
32, 33, 34, 36, 39, 42, 45, 54
641436
32, 33, 34, 36, 39, 42, 45, 54
641523
32, 33, 34, 36, 39, 42, 45, 54
641437
32, 33, 34, 36, 39, 42, 45, 54
641524
32, 33, 34, 36, 39, 42, 45, 54
641438
32, 33, 34, 36, 39, 42, 45, 54
641525
32, 33, 34, 36, 39, 42, 45, 54
641439
32, 33, 34, 36, 39, 42, 45, 54
641526
32, 33, 34, 36, 39, 42, 45, 54
644812
32, 33, 34, 36, 39, 42, 45, 54
—
—
2
644814
32, 33, 34, 36, 39, 42, 45, 54
—2
—
—2
—
647481
32, 33, 34, 36, 39, 42, 45, 54
647497
32, 33, 34, 36, 39, 42, 45, 54
MTA-156 Posted Connectors (Closed End and Feed-Thru) will Only mate with MTA-156 connectors with locking
ramp and without polarizing tabs. They will NOT mate with MTA-156 Quad Connectors.
Parts can be made available upon request. Minimums may apply.
2
3
4
6
Voltage Rating — 600 VAC
Current Rating — 7 amp max.
Low-Level Resistance —
7 m⍀ max. initial
Dielectric Withstanding Voltage —
1500 VAC/1 min.
Insulation Resistance —
5000 M⍀ min. initial
Operating Temperature —
-55⬚ C to ⫹105⬚ C
RoHS Equiv.
Standard UL 94V-2, .000015 [0.00038] Gold Plated
18 AWG
647476
32, 33, 34, 36, 39, 42, 45, 54
0.8-0.9 mm2
22 AWG
643995
32, 33, 34, 36, 39, 42, 45, 54
0.3-0.4 mm2
No. of
Circuits
Performance Data
Part Nos.
Standard UL 94V-2, .000030 [0.00076] Gold Plated
18 AWG
644807
32, 33, 34, 36, 39, 42, 45, 54
0.8-0.9 mm2
20 AWG
2
—
—
0.5-0.6 mm2
22 AWG
644809
32, 33, 34, 36, 39, 42, 45, 54
0.3-0.4 mm2
24 AWG
—2
—
0.2 mm2
26 AWG
—2
—
0.12-0.15 mm2
2
Color Coding by Wire Size
for UL 94V-2 Connectors
18 AWG —Orange
20 AWG — Yellow
22 AWG — Red
24 AWG — White
26 AWG — Blue
Feed-Thru Connector1
Dim.
A
.468
11.89
.624
15.85
.780
19.81
1.092
27.74
-2
9
-3
12
-4
15
-6
24
Technical Documents
Replacement IDC Contacts
Product Specification
108-1065 MTA-156 Posted
Connector
Material and Finish
Application Specification
114-1020 MTA-156 Connectors,
Posted Connectors and
Card Edge Connectors
Dim.
No. of
Circuits
Suffix
B
.316
8.03
.472
11.99
.628
15.95
.940
23.88
A
1.560
39.62
2.028
51.51
2.496
63.40
3.900
99.06
Contacts — Copper alloy, post tin
.126
plated over nickel
[3.20]
.045
[1.14]
Sq.
.840
[21.34]
.100
[2.54]
B
1.408
35.76
1.876
47.65
2.344
59.54
3.748
95.20
AWG
18
20
22
24
26
Wire Size
mm2
0.8-0.9
0.5-0.6
0.3-0.4
0.2
0.12-0.15
Prefix/
Suffix
-9
1-
-2
1-
-5
2-
-4
Part
Numbers
3-641425-1
3-641426-1
3-641427-1
3-641428-1
3-641429-1
45
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Flat Headers—Straight
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.250
[6.35]
.125
[3.18]
A
MTA-156
.156 [3.96]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. .125 [3.18] solder tail lengths are
for .062 [1.57] thick printed circuit
boards and .175 [4.45] solder tail
lengths are for .093-.125 [2.363.18] thick printed circuit boards.
4. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
.156
[3.96]
Typ.
.045
[1.14]
.078
[1.98]
Typ.
Post No. 1
.125
[3.18]
.140
Min.
[3.56]
Solder tail
Length
(See Chart)
Edge of Board
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, see
pages 36 thru 39, 55, 60 and 62.
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with square posts and a .125
[3.18] solder tail length would be:
Base number 640383 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-640383-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
2
24
PC Board Hole Diameters
Square
Round
Post
Post
.080/.070
.070/.060
[2.03/1.78]
[1.78/1.52]
.156
[3.96]
Header Ordering
Information
No. of
Pos.
.450
Ref.
[11.43]
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Base Part Numbers
Square Posts
.125 [3.18]
.175 [4.45]
Solder tail
Solder tail
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
640383
2–24
Round Posts
.125 [3.18]
Solder tail
Header
RoHS
Part Nos.
Equiv.
.175 [4.45]
Solder tail
Header
RoHS
Part Nos.
Equiv.
2–24
640384
2–24
644750
2–24
Standard UL94V-0, .000030 [0.00076] Gold Plated
641202
32–54
644756
32–54
641203
32–54
644757
32–54
Standard UL94V-0, .000015 [0.00038] Gold Plated
641113
32–54
644763
32–54
641114
32–54
644764
32–54
644749
Lead Free
RoHS
Prefix/Suffix
3-640383–2
thru
5-640383-4
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
46
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Flat Headers—Right-Angle
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Post No. 1
.125
[3.18]
.125
[3.18]
.390
[9.91]
Solder tail
Length
(See Chart)
Edge of Board
.390 ± .015
[9.91 ± 0.38]
X
.156
[3.96]
.080/.070
[2.03/1.78]
.125
[3.18]
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with square posts and a .125
[3.18] solder tail length would be:
Base number 641204 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-641204-0
The part numbers in bold face
are the RoHS equivalent version. Example:
24
.100
[2.54]
A
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Header Ordering
Information
2
.250
[6.35]
A
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, see
pages 36 thru 39, 55, 60 and 62.
No. of
Pos.
.078
[1.98]
Typ.
MTA-156
.156 [3.96]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. .125 [3.18] solder tail lengths are
for .062 [1.57] thick printed circuit
boards and .175 [4.45] solder tail
lengths are for .093-.125 [2.363.18] thick printed circuit boards.
4. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
.156
[3.96]
Typ.
.045
[1.14]
Sq.
Lead Free
RoHS
Prefix/Suffix
3-641204–2
thru
5-641204-4
X = .140 [3.56] Min., .430 [10.92] Max.
when mated with MTA Connector.
16°
Retentive Leg
Edge of Board
X = .140 [3.56] Min. when mated with
SL-156 Wire-to-Board Connector.
Y
.156
Typ.
[3.96]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Ø .063 ± .002
Typ.
[1.60 ± 0.05]
Recommended Mounting Hole Pattern for .063 [1.60]
Thk. PC Board for Retentive Leg Header
Y = .140 [3.56] Min., .430 [10.92] Max. when mated with
MTA Connector.
Base Part Numbers
Retentive Leg
Header
RoHS
Part Nos.
Equiv.
Square Posts
.125 [3.18] Solder tail
Header
RoHS
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
647646
2–12
.175 [4.45] Solder tail
Header
RoHS
Part Nos.
Equiv.
640385
2–24
644751
2–24
Standard UL94V-0, .000030 [0.00076] Gold Plated
—
—
641204
32–54
644758
32–54
Standard UL94V-0, .000015 [0.00038] Gold Plated
—
—
641115
32–54
644765
32–54
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
47
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Friction Lock Headers—Straight
.180
[4.57]
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
MTA-156
.156 [3.96]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. .125 [3.18] solder tail lengths are
for .062 [1.57] thick printed circuit
boards and .175 [4.45] solder tail
lengths are for .093-.125 [2.363.18] thick printed circuit boards.
4. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
connectors with a locking ramp
for polarization/retention purposes, see pages 36 thru 39,
55, 60 and 62.
For polarizing purposes only
use connectors without a locking ramp. See pages 36 thru
39, 55, 60 and 62.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with square posts and a .125
[3.18] solder tail length would be:
Base number 641208 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-641208-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
No. of
Pos.
Standard
Prefix/Suffix
2
641208–2
thru
2-641208-4
24
.300
[7.62]
A
.045
[1.14]
.156
Typ.
[3.96]
Y
.078
Typ.
[1.98]
Post No. 1
.450
Ref.
[11.43]
.425
[10.8]
.125
[3.18]
.175
Min.
[4.45]
Y = .073 [1.85] 9-24 position
tin plated headers.
Solder tail
Length
(See Chart)
Edge of Board
Y = .068 [1.73] Max. 2-8
position tin plated and
2–24 position gold
plated headers.
.068
[1.7]
.156
[3.96]
.400
[10.16]
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
PC Board Hole Diameters
Square
Round
Post
Post
.080/.070
.070/.060
[2.03/1.78]
[1.78/1.52]
16° ± 3°
Retentive Leg
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Base Part Numbers
Retentive
Leg
Header
RoHS
Part Nos.
Equiv.
Square Posts
.125 [3.18]
Solder tail
Header
RoHS
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
1744017
2-12
640445
2–24
.175 [4.45]
Solder tail
Header
RoHS
Part Nos. Equiv.
Round Posts
.125 [3.18]
.175 [4.45]
Solder tail
Solder tail
Header
RoHS
Header
RoHS
Part Nos. Equiv.
Part Nos.
Equiv.
644752
2–24
640388
2–24
644753
2–24
Standard UL94V-0, .000030 [0.00076] Gold Plated
—
—
641208
32–54
644759
32–54
641209
32–54
644760
32–54
Standard UL94V-0, .000015 [0.00038] Gold Plated
—
—
641119
32–54
644766
32–54
641120
32–54
644767
32–54
Lead Free
RoHS
Prefix/Suffix
3-641208–2
5-641208-4
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not
available, please contact Product Engineering to expedite your request.
Note:
Select load headers (omitted pin headers) and tube loaded product are available upon request. Please contact product
engineer or product manager for details.
48
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Friction Lock Headers—Right-Angle
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.180
[4.57]
.300
[7.62]
Y = .068 [1.73] Max. 2-8
position tin plated and
2–24 position gold
plated headers.
Notes:
For mateability options, see
matrix on pages 34, 35, 54
and 58.
When using Front Bend
Headers — for mating half
visuals use connectors with a
locking ramp for polarization/
retention purposes. When using
Rear Bend Headers — for mating
half visuals use connectors without a locking ramp. For polarization purposes only see pages
36 thru 39, 55, 60 and 62.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are
determined by the number
of post positions in the header.
For example, the complete part
number for a 10-position header
with square posts, front bend,
and a .125 [3.18] solder tail
length would be:
Base number 641210 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-641210-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
No. of
Pos.
Standard
Prefix/Suffix
2
641210–2
thru
2-641210-4
24
Lead Free
RoHS
Prefix/Suffix
3-641210–2
5-641210-4
See page 15 for an explanation of
RoHS lead free equivalents.
Y = .073 [1.85] 9-24 position
tin plated headers.
A
.156
Typ.
[3.96]
.045
[1.14]
Sq.
Y
Y
.078
[1.98]
Typ.
Post No. 1
.450
[11.43]
.425
[10.8]
.425
[10.8]
.157
[3.99]
.125
[3.18]
.212
[5.38]
Edge of Board
Solder tail
Length
(See Chart)
X
.156
[3.96]
MTA-156
.156 [3.96]
1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Gold headers are duplex plated, gold
on mating end of post and tin on the
solder tail.
3. .125 [3.18] solder tail lengths are for
.062 [1.57] thick printed circuit boards
and .175 [4.45] solder tail lengths are
for .093-.125 [2.36-3.18] thick printed
circuit boards.
4. To determine header overall length
(Dim. A), multiply .156 x the number of
posts. Example: .156 x 10 posts equals
1.560 inches [39.62 mm].
Rear Bend
Front Bend
X = .325 [8.26] Min., .400 [10.16]
Max., when mated with
MTA Connector.
.080/.070
X
=
.325 [8.26] Min., .345 [8.76]
[2.03/1.78]
Max., when mated with
SL-156 Connector.
X = .500 [12.7] Min., .650 [16.51]
Max., when mated with
MTA Connector.
X = .500 [12.7] Min., when mated
with SL-156 Connector.
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Base Part Numbers
Square Posts
Front Bend
.125 [3.18]
Solder tail
Header
RoHS
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
640389
2–24
Rear Bend
.175 [4.45]
Solder tail
Header
RoHS
Part Nos.
Equiv.
.125 [3.18]
Solder tail
Header
RoHS
Part Nos.
Equiv.
.175 [4.45]
Solder tail
Header
RoHS
Part Nos.
Equiv.
2–24
640387
2–24
644755
2–24
Standard UL94V-0, .000030 [0.00076] Gold Plated
641210
32–54
644761
32–54
641207
32–54
644762
32–54
Standard UL94V-0, .000015 [0.00038] Gold Plated
641121
32–54
644768
32–54
641118
32–54
644769
32–54
644754
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
49
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Polarized Lock Headers—Straight
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated or
.000030 [0.00076] gold over nickel
.210
[5.33]
90° Ref.
Typ.
Retention Tabs
4 Plc.
Notes:
MTA-156
.156 [3.96]
1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Peg holes are not required in
PC Boards when headers without pegs
are used.
3. One peg only on a 2 position header,
other position sizes have two pegs.
4. Headers with .00015 [0.00038] gold
plated post are available upon request.
Minimums may apply.
5. To determine header overall length
(Dim. A), multiply .156 x the number of
posts. Example: .156 x 10 posts equals
1.560 inches [39.62 mm].
Post No. 1
.125
[3.18]
.125
[3.18]
Polarized
Retention Peg
Peg Hole
.066/.062 Dia.
[1.68/1.57]
Edge of Board
Lead Free
RoHS
Prefix/Suffix
3-644615–2
thru
4-644615-8
See page 15 for an explanation of
RoHS lead free equivalents.
.545
[13.84]
.167
[4.24]
PC Board Hole Diameters
Square
Round
Post
Post
.069/.065
.054/.050
[1.75/1.65]
[1.37/1.27]
.078
[1.98]
.156
[3.96]
.425
[10.80]
.225
Min.
[5.72]
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with square posts with
pegs would be:
Base number 644615 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-644615-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
18
.450
[11.43]
.100
[2.54]
Header Ordering
Information
2
.073
[1.85]
.045
[1.14]
.076
[1.93]
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
connectors with a locking ramp
for polarization/retention purposes, see pages 36 thru 39,
55, 60 and 62.
For polarizing purposes only
use connectors without a locking ramp. See pages 36 thru
39, 60 and 62.
No. of
Pos.
Polarized
Retention Peg
A
.156
[3.96] Typ.
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Base Part Numbers
Square Posts
Without Pegs
With Pegs
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
644611
32–48
Round Posts
Without Pegs
Header
RoHS
Part Nos.
Equiv.
With Pegs
Header
RoHS
Part Nos.
Equiv.
32–48
644612
32–48
644616
32–48
Standard UL94V-0, .000030 [0.00076] Gold Plated
644627
32–48
644631
32–48
644628
32–48
644632
32–48
644615
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
50
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Polarized Lock Headers—Right-Angle
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Posts — Copper alloy, tin plated or
.000030 [0.00076] gold over nickel
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
only connectors with a locking
ramp for polarization/retention
purposes, see pages 36 thru
39, 55, 60 and 62.
For polarizing purposes only
use connectors without a locking ramp. See pages 36 thru
39, 60 and 62.
Retention Tabs
4 Plc.
Polarized
Retention Peg
A
.156
Typ.
[3.96]
.076
[1.93]
Typ.
.100
[2.54]
.073
[1.85]
Typ.
.210
[5.33]
Typ.
Ref.
.045
Sq.
[1.14]
Post No. 1
.450
[11.43]
.125
[3.18]
.545
[13.84]
.205
[5.21]
Typ.
.125
[3.18]
.425
[10.80]
Front
Bend
Front
Bend
Reg. Hole
.066/.062 Dia.
[1.68/1.57]
Edge of Board
x
.069/.065
[1.75/1.65]
.239
[6.07]
.156
[3.96]
X = .350 [8.89] Min., .825 [20.96]
Max., when mated with
MTA Connector.
X = .350 [8.89] Min. when mated
with SL-156 Connector.
No. of
Pos.
2
18
Lead Free
RoHS
Prefix/Suffix
3-644617–2
thru
4-644617-8
See page 15 for an explanation of
RoHS lead free equivalents.
.125
[3.18]
RearRear
Bend
Bend
X = .500 [12.7] Min., .700 [17.78]
Max., when mated with
MTA Connector.
X = .500 [12.7] Min., when
mated with SL-156
Connector.
.078
[1.98]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with front bend and
with pegs would be:
Base number 644617 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-644617-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
.200
[5.08]
Typ.
MTA-156
.156 [3.96]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Peg holes are not required in PC
Boards when headers without
pegs are used.
3. One peg only on a 2 position
header, other position sizes have
two pegs.
4. Headers with .00015 [0.00038]
gold plated post are available
upon request. Minimums may
apply.
5. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
90° Ref.
Typ.
Base Part Numbers
Square Posts
Front Bend
Without Pegs
Header
RoHS
Part Nos.
Equiv.
With Pegs
Header
RoHS
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
644613
32–48
Rear Bend
Without Pegs
Header
RoHS
Part Nos.
Equiv.
644617
32–48
644614
32–48
Standard UL94V-0, .000030 [0.00076] Gold Plated
644629
32–48
644633
32–48
644630
32–48
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
51
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Friction Lock High Temperature Headers—Straight
Material and Finish
For use with Infrared Reflow Process
Housing — UL94V-0 rated, nylon, black
Posts — Copper alloy, tin plated,
.000015 [0.00038] gold over nickel
Temperature— Maximum
Temperature Rating: 280°C
A
Notes:
MTA-156
.156 [3.96]
1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Gold headers are duplex plated, gold
on mating end of post and tin-lead on
the solder tail.
3. Headers with straight and right-angle
square posts are available upon
request. Minimums may apply.
4. To determine header overall length
(Dim. A), multiply .156 x the number of
posts. Example: .156 x 10 posts equals
1.560 inches [39.62 mm].
.156
Typ.
[3.96]
.076 ± .003
[1.93 ± 0.08]
2 Plcs.
Mating
End
Post No. 1
.700 ± .010
±02
. 5 ]
7
1
[ 7
. 8
.125
[3.18]
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
connectors with a locking ramp
for polarization/retention purposes, see pages 36 thru 39,
55, 60 and 62.
For polarizing purposes only
use connectors without a locking ramp. See pages 36 thru
39, 60 and 62.
Solder tail
1
[ 5
.8
.450 Ref.
[11.43]
.545 ± .010
1
[ 843.
.125 ± .010
±02
. 5 ]
1
[3. 8
±0.25
]
.335
[8.51]
.425
[10.80]
.156
[3.96]Typ.
.120
[3.05]Typ.
.008
[0.20]
Min. Thick Solder Paste
in Area Shown
Position No. 1
Header Ordering
Information
.120
[3.05]Typ.
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with round tin plated posts:
Base number 647648 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-647648-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
2
Lead Free
RoHS
Prefix/Suffix
3-647648–2
12
4-647648-2
No. of
Pos.
Ø .045 ± .001 Ref.
[1.14 ± 0.03]
.005
.073 +– .010
p.yT
+0.13
–02
. 5 ]
.210 Ref.
[5.33] p.Ty
See page 15 for an explanation of
RoHS lead free equivalents.
.650 ±.010
[16.51 ± 0.25]
Solder Paste Area
.057 ±.003
[1.45 ± 0.08]
Pretinned Plated
Thru Hole Typ.
.100
[2.54]
Pretinned Land
(Both Sides) Typ.
.070 Typ.
[1.78]
Recommended Mounting Hole Pattern
for .062 [1.57] Thick PC Board
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Base Part Numbers
Round Post
Header
Part Nos.
RoHS
Equiv.
Standard UL94V-0, Tin Plated
647648
32–42
Standard UL94V-0, .000015 [0.00038] Gold Plated
647649
32–42
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
52
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Shrouded Headers—Straight and Right-Angle
Straight Post (.045 [1.14] Square or Round)
Material and Finish
Housing — UL94V-0 rated, polyester,
black
Posts — Copper alloy, tin plated; or
.000030 [0.00076] or .000015
[0.00038] gold over nickel
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, see
pages 36 thru 39 and 55.
Header Ordering Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are determined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight, square
posts and with pegs would be:
Base number 647127 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-647127-0
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
Dim.
A
.406
10.31
.562
14.27
.718
18.24
.874
22.20
1.030
26.16
1.186
30.12
1.342
34.09
1.498
38.05
1.654
42.01
1.810
45.97
1.966
49.94
RoHS
Prefix/
Suffix
2--2
2--3
2--4
.455
[11.56]
.300
[7.62]
Post
No. 1
2--7
2--8
2--9
3--0
3--1
3--2
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
.210
[5.33]
.125 ± .010
[3.18 ± 0.25]
Front Bend
.550
[13.97]
.300
[7.62]
Ref.
.045
[1.14]
.100
.167
[2.54] [4.24]
.125
[3.18]
.455
[11.56]
.210
[5.33]
.525
[13.34]
Ref.
.205
[5.21]
PC Board Hole Diameters
Square Post
.069/.065
[1.75/1.65]
Round Post
.054/.050
[1.37/1.27]
.156
Typ. Post
[3.96]
No. 1
.125
[3.18]
Rear Bend
Note: Consult Product Drawing for details
on placing headers onto PC boards.
.069/.065
Dia.
[1.75/1.65]
.167
[4.24]
.066/062
[1.68/1.58]
Dia.
.245
Min.
[6.22]
.239
[6.07]
.066/062
[1.68/1.58]
Dia.
.078
[1.98]
Edge of Board
.350/.700
[8.89/17.78]
.078
[1.98]
Edge of Board
.156
[3.96]
.156
[3.96]
Recommended Mounting Hole Pattern for .062 [1.57] Thick
PC Board Using a Straight Post Header
Recommended Mounting Hole Pattern for .062 [1.57] Thick
PC Board Using a Right-Angle Header
Base Part Numbers
Straight Square Posts
Without Pegs
With Pegs
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
647123
22–32
Straight Round Posts
Without Pegs
With Pegs
Header
RoHS
Header
RoHS
Part Nos.
Equiv.
Part Nos.
Equiv.
22–32
647124
22–32
647128
22–32
Standard UL94V-0, .000030 [0.00076] Gold Plated
647131
22–32
647135
22–32
647132
22–32
647136
22–32
Standard UL94V-0, .000015 [0.00038] Gold Plated
647139
22–32
647143
22–32
647140
22–32
647144
22–32
647127
2--5
2--6
.205 ± .002
.156
± 0.05]
Typ. Post [5.21
[3.96]
No. 1
.210
[5.33]
.525
[13.34]
.125
[3.18]
.156
[3.96]
.455
[11.56]
.525
[13.34]
Ref.
Polarized
Retention Peg
A
.045
[1.14]
.300
[7.62]
Ref.
.045
[1.14]
MTA-156
.156 [3.96]
Notes:
1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Gold headers are duplex plated, gold
on mating end of post and tin on the
solder tail.
3. Peg holes are not required in PC boards
when headers without pegs are used.
4. One peg only on a 2 position header,
other position sizes have two pegs.
5. Right-angle front and rear bend headers
with retention pegs can be made available upon request. Minimums may apply.
Right-Angle (.045 [1.14] Square)
Square Posts
Right-Angle Posts, Front Bend
Without Pegs
Header
RoHS
Part Nos.
Equiv.
Standard UL94V-0, Tin Plated
647125
Right-Angle Posts, Rear Bend
Without Pegs
Header
RoHS
Part Nos.
Equiv.
22–32
647126
22–32
Standard UL94V-0, .000030 [0.00076] Gold Plated
647133
22–32
647134
22–32
Standard UL94V-0, .000015 [0.00038] Gold Plated
647141
22–32
647142
22–32
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details.
53
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Quad Connectors
■
Provides four points of
contact
■
Greater current carrying
capability than Standard
MTA-156 Connectors
■
Connector styles include
both closed end and feedthru with locking ramp, with
and without polarizing tabs
in 2 through 12 positions
■
Available for wire ranges of
18 – 22 AWG [0.9– 0.3
mm✒]
■
Contacts are lubricated for
fretting corrosion protection
■
Complies with
Tyco Electronics Quality
Specification 102-6,
“Preparation of Design
Objectives”
■
Uses existing MTA application tooling for termination
■
Quad connectors preloaded
with contacts
■
All contacts are slotted for
insulation displacement
(IDC) termination technique
■
Connectors and headers are
end-to-end stackable
The MTA-156 Quad Connectors
only mate with standard MTA156 square post headers and
use existing MTA application
tooling for termination.
Only one wire to be terminated into an IDC contact
slot.
*The 102-6 Quality Specification is
the new procedure for “Preparation
of Design Objectives”. Its purpose is
to provide a means for verifying the
maximum current carrying capacity
of the device.
Note: Refer to pages 70 through 74
for approved wire listings.
AWG size is “frosted” on
the side of the connector
Product Specifications
108-1219 MTA-156 Quad Connector
System
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Application Specifications
114-1048 MTA-156 Quad
Connector
647
647
647
123
647
754
644
752
644
751
644
749
644
617
644
615
644
613
644
611
644
445
640
389
640
383
640
644329
644370
644371
644375
644376
644377
644381
644382
644383
644387
644388
644389
385
Headers
Satisfies the VDE requirements according to VDE
110, Insulation Group B,
250 vac for air and creepage paths
640
R
This matrix has been prepared to assist you, our customer,
in defining the correct mating halves for the MTA-156
header and connector combination. Where a “Y” is indicated the combination is a valid mating pair.
Connectors
■
Certified by Canadian
Standards
Association,
File No. LR 7189
Voltage Rating — 600 vac
Current Rating — 12.5 amp max. on a
single circuit.
For Multiple Circuit Loading —
refer to Product Specification for current
rating chart.
Low-Level Resistance —
3.0 m⍀ max. initial
Dielectric Withstanding Voltage —
1500 vac/1 min.
Insulation Resistance —
5000 M⍀ min. initial
Operating Temperature —
-55⬚ C to ⫹105⬚ C
Technical Documents
R
■
Performance Data
127
■
The connectors are available for wire ranges of
18 – 22 AWG [0.9– 0.3 mm2]
and in a variety of styles
including closed end and
feed-thru with locking ramp,
with and without polarizing
tabs.
126
■
The MTA-156 Quad Connector provides a connection with four points of
contact. The UL94V-0 rated
connector with multi-point
contacts provides greater
current carrying capability
than the Standard MTA-156
Connector. These connectors comply with
Tyco Electronics Quality
Specification 102-6* and
satisfy the VDE requirements
according to VDE 110.
125
MTA-156
.156 [3.96]
Product Facts
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
54
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Quad Connectors—Closed End and Feed-Thru
Closed End with Locking Ramp
A
.097
[2.46]
.090
[2.29]
.280 .230
[7.11] [5.84]
.100
[2.54]
.325 .355
[8.26] [9.02]
AWG
.180
[4.57]
.156
Typ.
[3.96]
.245
[6.22]
.100
[2.54]
.308
[7.82]
AWG
.725
[18.42]
without Polarizing Tabs
with Polarizing Tabs
Feed-Thru with Locking Ramp
.245
[6.22]
A
.090
[2.29]
.230
.280
[5.84]
[7.11]
.325 .385
[8.26] [9.78]
AWG
.180
[4.57]
.156
Typ.
[3.96]
.100
[2.54]
.100
[2.54]
.308
[7.82]
MTA-156
.156 [3.96]
.097
[2.46]
AWG
.725
[18.42]
with Polarizing Tabs
without Polarizing Tabs
Material and Finish
Housing — UL94V-0 rated, nylon,
black
Contacts — High conductivity copper
alloy, post tin plated
For mateability options, see
matrix on page 54.
For strain relief and dust
covers, see pages 40
and 41.
For mating half visuals, see
pages 46 thru 48 and 50,
52 and 53, (49 and 51 Front
Bend Headers only). Mates
with tin-plated square posts
only.
Refer to pages 70 thru 74
for approved wire listing.
Note: To determine connector overall
length (Dim. A), multiply .156 x the
number of circuits. Example: .156 x
10 circuits equals 1.560 inches
[39.62 mm].
Base Part Numbers
Closed End with Locking Ramp
Without Tabs
With Tabs
Connector Type
& Wire Size
Connector
Part Nos.
Standard UL94V-0, Tin Plated
18 AWG
644329
0.8-0.9 mm2
20 AWG
644370
0.5-0.6 mm2
22 AWG
644371
0.3-0.4 mm2
Feed-Thru with Locking Ramp
Without Tabs
With Tabs
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
32–42
644381
32–42
644375
32–42
644387
32–42
32–42
644382
32–42
644376
32–42
644388
32–42
32–42
644383
32–42
644377
32–42
644389
32–42
Replacement IDC Contacts
Connector Ordering
Information
The “Base Part Numbers”
Chart above shows the base
part number and number of
circuits available for the
described connectors.
Prefixes and suffixes are determined by the number of circuit
positions in the connector. For
example, the complete part
number for a 10-position
closed end connector with
locking ramp and without
polarizing tabs for 18 AWG
wire would be:
Base number 644329 plus
prefix-and-suffix
1- — -0
The correct ordering number is
1-644329-0
Material and Finish
The set of numbers in bold face
are the RoHS equivalent version of the standard product.
Example:
No. of
Pos.
Standard
Prefix/Suffix
2
644329–2
thru
1-644329-2
12
Lead Free
RoHS
Prefix/Suffix
3-644329–2
4-644329-2
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Contacts — High conductivity copper
alloy post tin plated
.562
[14.27]
.116
[2.95]
Wire Size
AWG
mm2
18
0.8-0.9
20
0.5-0.6
22
0.3-0.4
Part
Numbers
3-644508-1
3-644509-1
3-644510-1
Note: Tyco Electronics does not recommend terminating an MTA contact
more than one time. Use replacement contacts when required for
field repairs or wire gage changes.
55
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Card Edge Connectors—Closed End and Feed-Thru
Material and Finish
C
B
A
Housing — UL94V-0 rated, polyester,
see chart for color
Contacts — Phosphor bronze, post tin
plated
.161
Ref.
[4.09]
.156
[3.96]
Typ.
.094
[2.39]
.170
[4.32]
Note: Refer to pages 70 thru 74 for
approved wire listings.
MTA-156
.156 [3.96]
Color Coding by Wire Size for
UL94V-0 Connectors
26 AWG — Blue
24 AWG — White
22 AWG — Red
20 AWG — Yellow
18 AWG — Orange
.075
[1.91]
.300
[7.62]
.380
[9.65]
.440
[11.18]
.125
Dia.
[3.18]
.677
[17.2]
.100
[2.54]
Min.
D
± .005
[ ± 0.13 ]
.100
[2.54]
Min.
.156
[3.96]
Typ.
.138
[3.51]
E
R. .075
[1.91]
.015 ± .005
[0.38 ± 0.13] x 45° Cham.
Both sides
.375
[9.53]
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the
base part number and number of circuits available for
the described connectors.
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
12-position closed end connector without mounting ears
for 18 AWG wire would be:
Base number 640859 plus
prefix-and-suffix
1- — -2
The correct ordering number is
1-640859-2
See page 15 for an explanation of
RoHS lead free equivalents.
Performance Data
Voltage Rating — 600 vac
Current Rating — 5 amp max.
Low-Level Resistance —
7 m⍀ max. initial
Dielectric Withstanding Voltage —
1250 vac/1 min.
Insulation Resistance —
5000 M⍀ min. initial
Operating Temperature —
⫺55⬚ C to ⫹105⬚ C
Technical Documents
Product Specification
108-1058 MTA-156 Card Edge
Connectors
Application Specification
114-1020 MTA-156 Connectors,
Posted Connectors and
Card Edge Connectors
.312 ± .005
[7.92 ± 0.13]
Circuitry
side
.090
[2.29]
Min.
.130
[3.3]
Typ.
.145
[3.68]
B
Recommended Panel Cutout
Recommended PC Board Layout
for .062 [1.57] Thk. PC Board
Base Part Numbers
Closed End
Without
With
Mounting Ears
Mounting Ears
No. of
No. of
Connector Circuits/
Connector Circuits/
Part Nos.
RoHS
Part Nos.
RoHS
Equiv.
Equiv.
Standard UL94V-0, Tin Plated
3, 6, 9, 12,
3, 6, 9, 12,
18 AWG
15,18, 20-24 640864 15,18, 20-24
640859 33,
36, 39, 42,
33, 36, 39, 42,
0.8-0.9 mm2
45, 48, 50-54
45, 48, 50-54
3, 6, 9, 12,
3, 6, 9, 12,
20 AWG
15,18, 20-24 640865 15,18, 20-24
640860
2
33, 36, 39, 42,
33, 36, 39, 42,
0.5-0.6 mm
45, 48, 50-54
45, 48, 50-54
3, 6, 9, 12,
3, 6, 9, 12,
22 AWG
15,18, 20-24 640866 15,18, 20-24
640861
2
33, 36, 39, 42,
33, 36, 39, 42,
0.3-0.4 mm
45, 48, 50-54
45, 48, 50-54
3, 6, 9, 12,
3, 6, 9, 12,
24 AWG
15,18, 20-24 640867 15,18, 20-24
640862 33,
36, 39, 42,
33, 36, 39, 42,
0.2 mm2
45, 48, 50-54
45, 48, 50-54
3, 6, 9, 12,
3, 6, 9, 12,
26 AWG
15,18, 20-24 640868 15,18, 20-24
640863 33,
36, 39, 42,
33, 36, 39, 42,
0.12-0.15 mm2
45, 48, 50-54
45, 48, 50-54
Connector Type
& Wire Size
No. of
Circuits
3
6
9
12
15
18
20
21
22
23
24
A
.500 [12.70]
.968 [24.59]
1.436 [36.47]
1.904 [48.36]
2.372 [60.25]
2.840 [72.14]
3.152 [80.06]
3.308 [84.02]
3.464 [87.99]
3.620 [91.95]
3.776 [95.91]
B
.926 [23.52]
1.394 [35.41]
1.862 [47.29]
2.330 [59.18]
2.798 [71.07]
3.266 [82.96]
3.578 [90.88]
3.734 [94.84]
3.890 [98.81]
4.046 [102.77]
4.202 [106.73]
Dimensions
C
1.248 [31.70]
1.716 [43.59]
2.184 [55.47]
2.652 [67.36]
3.120 [79.25]
3.588 [91.14]
3.900 [99.06]
4.056 [103.02]
4.212 [106.98]
4.368 [110.95]
4.524 [114.91]
Feed-Thru
Without
With
Mounting Ears
Mounting Ears
No. of
No. of
Connector Circuits/
Connector Circuits/
Part Nos.
RoHS
Part Nos.
RoHS
Equiv.
Equiv.
3, 6, 9, 12,
15,18, 20-24
641283 33,
36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
641284 33,
36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
641285 33,
36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
641286 33,
36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
641287 33,
36, 39, 42,
45, 48, 50-54
D
.484 [12.29]
.952 [24.18]
1.420 [36.07]
1.888 [47.96]
2.356 [59.84]
2.824 [71.73]
3.136 [79.65]
3.292 [83.62]
3.448 [87.58]
3.604 [91.54]
3.760 [95.50]
3, 6, 9, 12,
15,18, 20-24
641288 33,
36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
641289 33,
36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
641290 33,
36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
641291 33,
36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
641292 33,
36, 39, 42,
45, 48, 50-54
E
.650 [16.51]
1.118 [28.40]
1.586 [40.28]
2.054 [52.17]
2.522 [64.06]
2.990 [75.95]
3.302 [83.87]
3.458 [87.83]
3.614 [91.80]
3.770 [95.76]
3.926 [99.72]
Prefix/
Suffix
11122222-
-3
-6
-9
-2
-5
-8
-0
-1
-2
-3
-4
56
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Card Edge Accessories
Dust Cover
Retention Dimple
Material (RoHS Compliant)
UL94V-0 rated, polyester, white
.530
[13.46]
Cover is for both Closed End
and Feed-Thru connectors
.130
[3.3]
A
Cover Ordering Information
MTA-156
.156 [3.96]
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described cover.
Prefixes and suffixes are
determined by the number
of circuit positions in the
cover. For example, the
complete part number for
a 12-position dust cover
would be:
Base number 641106 plus
prefix-and-suffix
1- — -2
The correct ordering number
is
1-641106-2
Base Part Number
Cover Part No.
641106
No. of Circuits
3, 6, 9, 12, 15, 18, 20-24
Locking Plugs
No. of
Circuits
3
6
9
12
15
18
20
21
22
23
24
Dim.
A
.504
12.80
.972
24.69
1.440
36.58
1.908
48.46
2.376
60.35
2.844
72.24
3.156
80.16
3.312
84.12
3.468
88.09
3.624
92.05
3.780
96.01
Prefix/
Suffix
-3
Material (RoHS Compliant)
-6
UL94V-2 rated, nylon, white
Part Number 641101-1
-9
1-
-2
1-
-5
1-
-8
2-
-0
2-
-1
2-
-2
2-
-3
2-
-4
.075
[1.91]
.195
[4.95]
1.150
[29.21]
.074
[1.88]
Note: Contact must be removed to
install locking plug.
Material (RoHS Compliant)
UL94V-2 rated, nylon, white
Part Number 641293-1
Replacement IDC Contacts
.100
[2.54]
.126
[3.2]
Material and Finish
Phosphor bronze; post tin plated
.170
[4.32]
.609
[15.47]
Part Numbers
3-640991-1 (18 AWG [0.8-0.9 mm2])
3-640992-1 (20 AWG [0.5-0.6 mm2])
3-640993-1 (22 AWG [0.3-0.4 mm2])
3-640994-1 (24 AWG [0.2 mm2])
3-640995-1 (26 AWG [0.12-0.15 mm2])
.900
[22.86]
.130
[3.3]
.100
[2.54]
Note: Contact can remain during
locking plug installation.
57
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.156 [3.96] Centerline SL-156 Crimp Contacts and Housings
SL-156
.156 [3.96]
Product Facts
■
Rugged wire-to-board
interconnection to mate
with .045 square or round
post headers or staked
posts on .156 centers
■
Standard Connectors accept
wire range of 18–24 AWG
[0.9–0.2 mm✒] and LID
Connectors accept wire
range of 18–24 AWG
[0.9–0.2 mm✒] and a limited 16 AWG [1.29–1.42
mm✒] (2550–2800 CMA)
■
Two-piece interconnection
system (connector/header)
■
Housing made of flame
retardant nylon
■
Meets the material
requirements of Table 23.1
of UL1410 Standard for
High-Voltage Television
Receivers and Video
Productions
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
■
Certified by Canadian
Standards
Association,
File No. LR7189
Available in 1- through
24-position connector
configurations
Technical Documents
■
Connectors are end-to-end
stackable
Application Specification
114-1021
■
Wire-to-board system offers
polarization with friction
lock for positive mating
■
R
Product Specification
108-1049, 108-1049-1, 108-1049-2
These matrixes represent only the housing and header
combinations. You also need to consider the plating on
the contacts and headers. Gold contacts with gold
headers and tin contacts with tin headers.
Matrix for Tin Plated
Part Numbers
The AMP SL-156 connectors shown on the following
pages are designed to
mate with .045 [1.14]
square or round post
headers or staked posts on
.156 [3.96] centers.
The wire-to-board
connector is a two-piece
connector system with the
wire crimped to the contact,
then inserted into the housing. This product mates with
the MTA-156 flat, polarized
and friction lock header, or
staked posts (not MTA-156
shrouded headers).
Performance Data
Voltage Rating — 250 vac
Current Rating —
10 amp max. at 250 vac
Low-Level Resistance —
3.0 m⍀ max. initial
Dielectric Withstanding Voltage —
2000 vac/1 min.
Insulation Resistance —
1000 M⍀ min. initial
Operating Temperature —
⫺55⬚ C to ⫹105⬚ C
The Large Insulation
Diameter (LID) Contacts
and Housings are for use
in applications where wire
insulation is up to .112
[2.84] in diameter.
Standard
LID
640250 647401
640251 647400
770849 647402
6403
83
6403
84
6403
85
6403
87
6403
88
6403
89
6404
45
6446
11
6446
12
6446
13
6446
14
6446
15
6446
16
6446
17
6447
49
6447
50
6447
51
6447
52
6447
53
6447
54
6447
55
6472
27
6472
28
6472
29
6472
30
6472
60
6472
62
Housings
Headers
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Y Y Y N Y Y Y
Y Y Y Y Y Y Y
Y Y Y N Y Y Y
Y Y Y N Y
Y Y Y Y Y
Y Y Y N Y
Y Y
Y Y
Y Y
Y Y Y Y N Y Y Y N Y Y
Y Y Y Y Y Y Y Y Y Y Y
Y Y Y Y N Y Y Y N Y Y
Y Y
Y Y
Y Y
02
6412
03
6412
04
6412
07
6412
08
6412
09
6412
10
6446
27
6446
28
6446
29
6446
30
6446
31
6446
32
6446
33
6447
56
6447
57
6447
58
6447
59
6447
60
6447
61
6447
62
LID
Standard
640250 647401
640251 647400
770849 647402
6412
Housings
Headers
Y Y Y N Y Y Y Y Y Y N Y Y Y Y Y
Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
Y Y Y N Y Y Y Y Y Y N Y Y Y Y Y
Y Y Y Y N
Y Y Y Y Y
Y Y Y Y N
13
6411
6411
Housings
Standard
LID
640250 647401
640251 647400
770849 647402
14
6411
15
6411
18
6411
19
6411
20
6411
21
6443
22
6447
63
6447
64
6447
65
6447
66
6447
67
6447
68
6447
69
6472
61
Headers
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
Y Y Y N Y Y Y Y Y
Y Y Y Y Y Y Y Y Y
Y Y Y N Y Y Y Y Y
Y Y Y Y Y N Y
Y Y Y Y Y Y Y
Y Y Y Y Y N Y
58
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
SL-156 Crimp Contacts and Keying Plugs
Contacts
.180
[4.57]
.115
[2.92]
Material and Finish
.012 [0.3] bright tin plated brass or
phosphor bronze; .012 [0.3] pre-tin
brass; or .012 [0.3] brass or phosphor
bronze with .000030 [0.00076] gold
over nickel (see chart)
■
■
■
.121/.115
[3.07/2.92]
.131 ±.004
[3.33 ±0.10]
A
High Force
(6.5 Amp Max. Current Rating)
All tin-plated contacts are
post lubricated to resist
fretting corrosion
B
Low Force
(6.5 Amp Max. Current Rating)
.230
[5.84]
Maximum insulation
diameter is .105 [2.67]
.145/.140
[3.68/3.56]
Wire range is 18-30 AWG
[0.9-0.06 mm2]
SL-156
.156 [3.96]
C
Hooded (Dual Wipe)
(10 Amp. Max. Current Rating)
Wire Size
AWG mm2
24–30
0.2-0.06
Application Note
Part No. 640252 has a
higher mating and unmating force than Part
No. 350980 and is recommended to be used only in
housings with 1 through 12
positions.
Part No. 350980 can be
used in any size housing
but is recommended to be
used in housings with 13
through 24 positions.
Part No. 770476 is recommended for use in any size
housing. Its mating force is
similar to Part No. 350980
while unmating force is
similar to 640252.
Contact
A
A
18–24
0.9-0.2
B
C
Material and Finish
Strip
brass, pre-tin plated
Part Numbers
Loose Piece
641550-1
brass, bright tin plated
brass, pre-tin plated
brass, RoHS Compliant
brass, bright tin plated
brass, pre-tin plated
brass, gold plated
brass, RoHS Compliant
phosphor bronze, bright tin plated
phosphor bronze, gold plated
phosphor bronze, RoHS Compliant
640252-1
640252-2
3-640252-1
350980-1
350980-2
350980-3
3-350980-1
770476-1
770476-2
3-770476-1
—
640706-1
640706-2
3-640706-1
640707-1
—
770258-1
3-640707-1
770522-1
770522-2
3-770522-1
Application Tooling
Extraction Tool
Part No. 90471-1
Loose Piece Contacts —
PRO-CRIMPER II Hand Tool
Part No. 58614-1 (408-4228)
[For field service use only]
For CERTI-CRIMP hand tool, contact
Technical Support.
For housings, see pages 60
and 61.
Strip Contacts —
AMP-O-LECTRIC Model “G”
Termination Machine*
Applicator 680211-3
(Request Catalog 65828)
AMP-O-LECTRIC Model “K”
Termination Machine* Applicator
466468-2
AMP-O-MATIC Stripper-Crimper
Machine* SCA 466947-1 or 567828-1
(with CQM) (Request Catalog 65004)
AMPOMATOR CLS IV+ Lead Making
Machine* Applicator 466468-1
(Request Catalog 82659)
*Requires applicators. For part
numbers, call Technical Support.
Keying Plugs
.300
[7.62]
Material (RoHS Compliant)
.225
[5.72]
.300
[7.62]
UL94V-2 rated, nylon, natural color
Keying Plug
Part No. 640254-1
Keying Pin
Part No. 640255-1
59
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
SL-156 Housings—Wire-to-Board
.660
[16.76]
Housings
A
Material (RoHS Compliant)
UL94V-0 rated, nylon, white
.076
[1.93]
Typ.
.097
[2.46]
.250
[6.35]
Notes:
1. Accepts either .045 [1.14]
square or round posts. Housings
mate with flat and friction lock
headers, or staked posts on .156
[3.96] centers.
1
2
23
24
.037
Ref.
[0.93]
(A) With Locking Ramp/With Polarizing Tabs
2. Housings without ramp, with
polarizing tab, available upon
request. Minimums may apply.
.660
[16.76]
A
.100
[2.54]
.156
[3.96]
Typ.
.250
[6.35]
3. Recommend contact:
Part No. 640252 for 1 thru 12
positions; Part No. 350980 for 13
thru 24 positions; Part No. 770476
for 1 thru 24 positions.
SL-156
.156 [3.96]
.156
[3.96]
Typ.
.100
[2.54]
.019
[0.48]
1
2
.076
[1.93]
Typ.
23
.097
[2.46]
.037
Ref.
[0.93]
24
(B) With Locking Ramp/Without Polarizing Tabs
For contacts, see page 59.
For mateability options, see
matrix on page 58.
A
.660
[16.76]
For mating half visuals, for
connectors with locking
ramp, see pages 46, 47,
48, 50 and 52, (49 and 51
Front Bend Headers only.)
.076
[1.93]
Typ.
.156
[3.96]
Typ.
.250
[6.35]
1
2
23
24
.060
[1.52]
(C) Without Locking Ramp/Without PolarizingTabs
For mating half visuals,
for connectors without locking ramp, see pages 46
thru 52.
Note: Dim. A = 0.156 ⫻ (No. of Positions – 1) ⫹ 0.152
No. of
Positions*
Housing
Description
Part Numbers*
2–24
A
B
C
With Locking Ramp and Polarizing Tabs
With Locking Ramp and without Polarizing Tabs
Without Locking Ramp or Polarizing Tabs
770849
640250
640251
1–24
*Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and
12 Position = 1-xxxxxx-2.
Note: Housings not for use with LID Contacts. Shown on page 62.
60
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
SL-156 Housings With Through Board Latch
Housings
Material (RoHS Compliant)
UL94V-2 rated, nylon, white
.156
[3.96] Typ.
.078
[1.98] Typ.
1
.075
[1.91]
2
3
4
7
8
9
10
.250
[6.35]
.050 ± .007
[1.27 ± 0.18]
± .003
± 0.08 ]
SL-156
.156 [3.96]
.063
[1.60
.125
[3.18]
.063 ± .003
[1.60 ± 0.08]
.660
[16.76]
A
Mates with .045 square or
round staked posts only.
For contacts, see page 59
.
10
9
8
7
4
3
2
1
B
.105
[2.67]
.052 ± .002
[1.32 ± 0.05]
.105
[2.67]
Latch Cutout
.005
.163 +– .000
0.13
[4.14 +– 0.00
R. .015 Max.
[0.38]
4 Plc.
.078
[1.98]
PC Board
Posts
.156
[3.96]
Recommended PC Board Cutout
for .062 [1.57] Thick PC Board
No. of
Pos.
2
3
4
5
6
7
8
9
10
Dimensions
A
.312
7.92
.468
11.89
.624
15.85
.780
19.81
.936
23.77
1.092
27.74
1.248
31.70
1.404
35.66
1.560
39.62
B
Latch Location
Centered Between Pos.
Part
Number
—
1 and 2
1-770894-21
—
1 and 2
1-770894-31
—
2 and 3
1-770894-41
—
2 and 3
1-770894-51
—
3 and 4
1-770894-61
—
3 and 4
1-770894-71
—
4 and 5
1-770894-81
1 and 2 & 8 and 9
1-770894-91
1 and 2 & 9 and 10
1-770894-01
1.092
27.74
1.248
31.70
Note: Not for use with LID Contacts. Shown on page 62.
61
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
SL-156 Housings and Contacts for Large Insulation Diameter (LID) Wire
Housings
UL 94V-0 rated, nylon, white
Notes:
1. Accepts Standard and LID
contacts.
2. Larger opening in housings
eases contact insertion when
using wires that have large
insulation diameters (.100-.112
[2.54-2.84]).
3. Housings are not End-to-End
stackable.
.660
[16.76]
.156
Typ.
[3.96]
Material (RoHS Compliant)
.054
[1.37]
Typ.
.095
Typ.
[2.41]
.100
[2.54]
.250
[6.35]
.0365
[.927]
Ref.
.054
[1.37]
A
Note: Dim. A = 0.156 ⫻ (No. of Positions – 1) ⫹ 0.19
SL-156
.156 [3.96]
For mateability options, see
matrix on page 58.
For mating half visuals, for
connectors with locking
ramp, see pages 46, 47,
48, 50 and 52, (49 and 51
Front Bend Headers only.)
For mating half visuals, for
connectors without locking
ramp, see pages 46 thru 52.
Description
Part Numbers*
Housings
with Larger Openings
for Oversize Wire
Without Locking Ramp
or Polarizing Tabs
With Locking Ramp and
without Polarizing Tabs
With Locking Ramp and
Polarizing Tabs
647401
(shown above)
No. of
Positions*
1-24
2–24
647400
647402
*Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and
12 Position = 1-xxxxxx-2.
Contacts
Material and Finish
.012 [0.3] bright tin plated phosphor
bronze; .012 [0.3] phosphor bronze
with .000030 [0.00076] gold over nickel
(see chart)
■
■
■
.160
[4.06]
All tin-plated contacts are
post lubricated to resist
fretting corrosion
Maximum insulation
diameter is .112 [2.85]
Wire range is 18-24 AWG
[0.9-0.2 mm2] and a limited
16 AWG [1.29-1.42 mm2]
(2550-2800 CMA)
.112 [2.84]
.108 [2.74]
.524
[13.30]
.143
Product Specifications
108-1049-1 and 108-1049-2
Hooded (Dual Wipe)
(10 Amp Max. Current Rating)
Application Specification
114-1021
Application Tooling
Extraction Tool Part No. 90471-1
Loose Piece Contacts —
PRO-CRIMPER II Hand Tool
Part No. 91368-1 [18-24 AWG]
Part No. 91369-1 [16 AWG]
(For field service use only.)
For CERTI-CRIMP hand tool, contact
Technical Support.
Strip Contacts —
AMP-O-LECTRIC Model “G”
Termination Machine*
Applicator 1385048-3 [18-24 AWG]
Applicator 1385219-3 [16 AWG]
AMP-O-LECTRIC Model “K”
Termination Machine*
Applicator 1385048-2 [18-24 AWG]
Applicator 1385219-2 [16 AWG]
Wire
Size
Material
18-24 AWG
Phosphor
Bronze
16 AWG
(2550-2800 CMA only)
Phosphor
Bronze
Plating
Tin
Gold
RoHS Compliant
Tin
Gold
RoHS Compliant
Part Numbers
For LID* Wire
Strip
647406-1
647406-2
3-647406-1
647466-1
647466-2
3-647466-1
Loose Piece
647409-1
647409-2
3-647409-1
647485-1
647485-2
3-647485-1
*Large Insulation Diameter (.100-.112 [2.54-2.84])
Notes: 1. For information on application tooling, call Technical Support.
2. Can not be used with Standard SL-156 Housings, must be used with LID Housings only.
*For additional part numbers and
information contact Technical Support.
62
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System
Product Facts
.156 [3.96], .200 [5.08] and
.312 [7.92] centerline
■
Wire-to-board connectors
comprised of plug housings,
receptacle contacts for
discrete wire, and mating
post headers
■
Hooded contact designed to
accept wire with insulation
diameters up to .118 [3.00]
■
Positive locking feature
built into header back wall
■
Locking mechanism on
connector housing
maximizes retention
■
Number of positions: 1 to 11
for .156 [3.96] centerline;
2 to 12 for .200 [5.08]
centerline; and 2 to 5 for
.312 [7.92] centerline
■
Straight, through-hole
headers
■
Positive latch design for
easier mating and unmating
■
Polarization tabs help
prevent post misalignment
and mismating
■
Low-profile mating height of
.641 [16.3] for 2 to 11
positions
■
Straight headers are end-toend stackable to conserve
PCB space
■
Header packaging: bulk
pack and tube loaded
■
Plug housings and post
headers intermateable with
JST VH connectors
■
Directive 2002/95/EC (RoHS
Compliant
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
■
Certified by Canadian
Standards
Association,
File No. LR 7189
R
Applications
■
Household appliances,
garage door openers,
power supplies, power
connections, or other
areas requiring additional
connector retention
AMP Economy Power (EP)
Connectors are designed
for secondary power circuit
applications. They consist
of wire-to-pc board plug
housings (for receptacle
contacts) and mating post
headers. Three contact
centerline spacings are
available: .156 [3.96], .200
[5.08] and .312 [7.92].
Headers with .156 [3.96]
centerline are offered in
2 through 11 positions;
2 through 12 positions for
.200 [5.08] centerline; and
.312 [7.92] centerline are
available in 2 through 5
positions. Both versions are
provided in bulk pack or in
tubes for automatic
machines.
During mating, the positive
locking lever on the outside
of the plug housing
engages the mating header
housing to provide for
greater retention. This
helps maintain reliable
connections, when other
non-locking type connectors could vibrate apart.
This same locking lever
must be depressed to
unmate the connectors.
The slim, straight, post
headers are stackable endto-end for greater flexibility
when designing pc board
configurations.
The locking mechanism is
also located high enough to
help avoid interference with
pc board clear plastic
coating (potting), which is a
common treatment for many
home appliances.
The mating height of a
low-profile plug and vertical
header is .642 [16.3]; even
the 1-position high-profile
style measures only .732
[18.6] above the pc board.
Compact dimensions like
these are well suited for
most applications in confined spaces.
AMP EP
.156 [3.96], .200 [5.08] and .312 [7.92]
■
Performance Characteristics
Voltage Rating — 250 VAC
Current Rating — 7.5 amp max. (2 to
11 pos.), 8 amp max. (1 pos.)
Low Level Overall Resistance–
Initial — 10 mΩ max.
Final — 20 mΩ max.
Dielectric Withstanding Voltage —
1.5 kV AC, 1 min.
Insulation Resistance —
Initial — 1000 MΩ min.
Final — 500 MΩ min.
Durability — 50 mating and unmating
cycles
Operating Temperature — -13˚F to
+221˚F [-25°C to +105°C]
Wire Size Range — 18-22 AWG
[0.89-0.30 mm2]
Insulation Diameter — .118 [3.00]
max.
Technical Documents
Product Specification
108-5609
Application Specification
114-5253
Instruction Sheet
411-5899
63
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Contacts and Plug
Housings, Low-Profile
Crimp, Snap-in
Receptacle Contacts
.083
[2.11]
Material and Finish
(RoHS Compliant)
See chart.
.362
[9.19]
.055
[1.40]
.08
[2.1
Related Product Data
Plug Housings — Pages 64, 67 and 69
AMP EP
.156 [3.96]
Wire Size
Range
AWG
mm2
Wire
Insulation
Diameter
18–22 0.89-0.30
.067-.118
1.70-3.00
Material
and
Finish
Part
Number
Strip
Form
Loose
Piece
Phos. Brz., 1123721-1
Pre-Tin
Brass,
1123721-2
Pre-Tin
Applicator Part Number
AMP-O-LECTRIC
Terminator
Model K
Model G
Part No.
Part No.
1-471273-3
354500-1
AMPOMATOR
CLS IV+
Lead Maker
Base Part No.
356500
1318912-1*
1385286-1
1385286-2
1385286-3
—
* For 18–20 AWG, use Straight Action Hand Tool (SAHT) Part Number 91579-1.
Plug Housings, Low-Profile
Material and Finish
(RoHS Compliant)
.524
[13.31]
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
.284
[7.21]
Circuit No. 1
(2 Pos.)
.142 [3.61]
.382
[9.70]
Related Product Data
Contacts — see above
Mating Post Headers — Pages 65
and 66
.150
[3.81]
A
(3-11 Pos.)
.295 [7.49]
.059
[1.50]
.224
[5.69]
.154 [3.91]
.039 [1.00]
.156
[3.96]
Section X-X
Number of
Positions
2
3
4
5
6
7
8
9
10
11
12
Dimension
A
.310 [ 7.86]
.465 [11.82]
.621 [15.78]
.777 [19.74]
.933 [23.70]
1.089 [27.66]
1.245 [31.62]
1.401 [35.58]
1.557 [39.54]
1.713 [43.50]
1.878 [47.70]
.039
[1.00]
Part
Number
1-1123722-2
1-1123722-3
1-1123722-4
1-1123722-5
1-1123722-6
1-1123722-7
1-1123722-8
1-1123722-9
1-1123722-0
1-1123722-1
1-647690-2*
* Consult Product Drawing for dimensional detail.
64
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Straight and Right-Angle
Low-Profile Post Headers
.156 [3.96]
Typ.
Straight
.078 [1.98]
Typ.
Edge of Board
A
.156 [3.96] Centerline
.190 [4.82]
.028 [0.7]
.335
[8.5] .268
[6.8]
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated natural
color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
.125 [3.18]
.077 [1.95]
.077 [1.95]
.156 Centerline
[3.96]
.066/.062
[1.68/1.57]
.045 Sq. Post
[1.14]
.069/.065
[1.75/1.65]
Recommended Mounting Hole Pattern
for .063 [1.6] Thick PC Board
.303 [7.7]
.244 [6.2]
Post No. 1
.118 [3.0]
.146 [3.7]
Related Product Data
Number of
Positions
Mating Plug Housings — Page 64
Dimension
A
.310 [ 7.86]
.465 [11.82]
.621 [15.78]
.777 [19.74]
.933 [23.70]
1.089 [27.66]
1.245 [31.62]
1.401 [35.58]
1.557 [39.54]
1.713 [43.50]
1.871 [47.52]
2
3
4
5
6
7
8
9
10
11
12
Part Number
Tube Loaded (Pcs. per Tube)
1-1318300-2 (61)
1-1318300-3 (40)
1-1318300-4 (30)
1-1318300-5 (24)
1-1318300-6 (20)
1-1318300-7 (17)
1-1318300-8 (15)
1-1318300-9 (13)
1-1318300-0 (12)
1-1318300-1 (11)
—
Bulk Pack with Pegs
1744057-2
1744057-3
1744057-4
1744057-5
1744057-6
1744057-7
1744057-8
1744057-9
1-1744057-0
1-1744057-1
1-1744057-2
AMP EP
.156 [3.96]
Bulk Pack
1-1123723-2
1-1123723-3
1-1123723-4
1-1123723-5
1-1123723-6
1-1123723-7
1-1123723-8
1-1123723-9
1-1123723-0
1-1123723-1
1-647689-2*
* Consult Product Drawing for dimensional detail.
.156 [3.96] Centerline
Right-Angle
Edge of Board
A
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
.350
[8.89]
.020
[0.50]
.339
[8.60]
.272
[6.90]
.045
Sq. Post
[1.14]
.156
[3.96]
.126
[3.20]
.
.
.079 ± .004
[2.00 ± 0.10]
.126 ± .004
[3.20 ± 0.10]
Ø .065/.069
[1.65/1.75]
.339
[8.60]
.370
[9.40]
.156
Typ.
[3.96]
Recommended
PC Board Layout
Related Product Data
Mating Plug Housings — Page 64
Post No. 1
Number of
Positions
2
3
4
5
6
7
8
9
10
11
12
.045 Ref. .142
[3.60]
[1.14]
Dimension
A
.312 [ 7.92]
.468 [11.88]
.624 [15.84]
.780 [19.80]
.935 [23.76]
1.091 [27.72]
1.247 [31.68]
1.403 [35.64]
1.559 [39.60]
1.715 [43.56]
1.871 [47.52]
.323
[8.20]
Part Number
647676-2
647676-3
647676-4
647676-5
647676-6
647676-7
647676-8
647676-9
1-647676-0
1-647676-1
1-647676-2
65
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Straight and Right-Angle
Low-Profile Post Headers,
High Temperature
Straight
Maximum Temperature Rating: 280°C
A
Edge of Board
.190
[4.82]
.156
Typ.
[3.96]
Housing — UL 94V-0 rated nylon,
high temperature, natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
.225
[5.72]
.339
[8.60]
.156 [3.96] Centerline
Material and Finish
(RoHS Compliant)
.045
Sq. Post
[1.14]
Post No. 1
.059
[1.51]
Ø .065/.069
[1.65/1.75]
Recommended
PC Board Layout
.303
[7.70]
.575
[14.60]
.156
Typ.
[3.96]
.370
[9.40]
.145
[3.69]
.323
[8.21]
Related Product Data
AMP EP
.156 [3.96]
Mating Plug Housings — Page 64
Number of
Positions
2
3
4
5
6
7
8
9
10
11
Dimension
A
.312 [ 7.92]
.468 [11.88]
.624 [15.84]
.780 [19.80]
.935 [23.76]
1.091 [27.72]
1.247 [31.68]
1.403 [35.64]
1.559 [39.60]
1.715 [43.56]
Part Number
1744055-2
1744055-3
1744055-4
1744055-5
1744055-6
1744055-7
1744055-8
1744055-9
1-1744055-0
1-1744055-1
Right-Angle
Edge of Board
A
.156 [3.96] Centerline
.190
[4.82]
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
high temperature, natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
.156
Typ.
[3.96]
.350
[8.89]
.339
[8.60]
.045
Sq. Post
[1.14]
Post No. 1
.059
[1.51]
Ø .065/.069
[1.65/1.75]
.303
[7.70]
.370
[9.40]
.617
[15.68]
.156
Typ.
[3.96]
Recommended
PC Board Layout
Related Product Data
Mating Plug Housings — Page 64
.142
[3.60]
Number of
Positions
2
3
4
5
6
7
8
9
10
11
12
Dimension
A
.312 [ 7.92]
.468 [11.88]
.624 [15.84]
.780 [19.80]
.935 [23.76]
1.091 [27.72]
1.247 [31.68]
1.403 [35.64]
1.559 [39.60]
1.715 [43.56]
1.871 [47.52]
.323
[8.21]
Part Number
1744056-2
1744056-3
1744056-4
1744056-5
1744056-6
1744056-7
1744056-8
1744056-9
1-1744056-0
1-1744056-1
1-1744056-2
66
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Plug Housings and
Post Headers
.406
[10.30]
A
Plug Housings
.200 [5.08] Centerline
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Related Product Data
Contacts — Page 64
Mating Post Headers — See below
.263
[8.88]
.051
[1.30]
Circuit No. 1
Number of
Positions
2
3
4
5
6
7
8
9
10
11
12
Post Headers
.200 [5.08] Centerline
.053
Typ.
[1.35]
.051
[1.30]
.200
Typ.
[5.08]
Dimension
A
.353 [ 8.98]
.553 [14.06]
.753 [19.14]
.953 [24.22]
1.153 [29.30]
1.353 [34.38]
1.553 [39.46]
1.753 [44.54]
1.953 [49.62]
2.153 [54.70]
2.353 [59.78]
Part
Number
1744036-2
1744036-3
1744036-4
1744036-5
1744036-6
1744036-7
1744036-8
1744036-9
1-1744036-0
1-1744036-1
1-1744036-2
.200
Typ.
[5.08]
.190
[4.82]
A
.339
[8.60]
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post—Tin-plated brass
.200
Typ.
[5.08]
Ø .065/.069
[1.65/1.75]
.059
[1.51]
.045
Sq. Post
[1.14]
Post No. 1
.575
[14.60]
.146
[3.70]
.303
[7.70]
AMP EP
.200 [5.08]
Material and Finish
(RoHS Compliant)
Recommended PC Board Layout
.370
[9.40]
.323
[8.21]
A
Related Product Data
Edge of Board
.190
[4.82]
Mating Plug Housings — See above
.669 Max.
[17.00]
.339
Ref.
[8.60]
.200
Typ.
[5.08]
.080
2 Plcs.
[2.02]
.045
Sq. Post
[1.14]
.303
[7.70]
Post
No. 1
.142
[3.60]
Number of
Positions
Dimension
A
2
3
4
5
6
7
8
9
10
11
12
.302 [ 7.68]
.502 [12.76]
.702 [17.84]
.902 [22.92]
1.102 [28.00]
1.302 [33.08]
1.502 [38.16]
1.702 [43.24]
1.902 [48.32]
2.102 [53.40]
2.302 [58.48]
.059
[1.51]
Ø .065/.069
[1.65/1.75]
Recommended PC Board Layout
.370
[9.40]
.323
[8.21]
Part Number
Straight
1744037-2
1744037-3
1744037-4
1744037-5
1744037-6
1744037-7
1744037-8
1744037-9
1-1744037-0
1-1744037-1
1-1744037-2
Right-Angle
1744048-2
1744048-3
1744048-4
1744048-5
1744048-6
1744048-7
1744048-8
1744048-9
1-1744048-0
1-1744048-1
1-1744048-2
67
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Straight Post Headers,
Low-Profile
.312 [7.92] Centerline
.063 +.004/-0 Dia. Punched Hole
[1.60 +0.1/-0]
A
Material and Finish
(RoHS Compliant)
.028 [0.7]
Housing — UL 94V-0 rated natural
color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
.065 +.004/-0 Dia. Drilled Hole
[1.65 +0.1/-0]
.335
[8.5] .268
[6.8]
.312 [7.92] Centerline
.077 [1.95]
.077 [1.95]
.312 [7.92]
Centerline
Recommended PC Board Layout
Acceptable Board Thickness
.062 [1.57]
.045 Sq. Post
[1.14]
.303 [7.7]
Post No. 1
.244 [6.2]
.118 [3.0]
Related Product Data
.146 [3.7]
Mating Plug Housings — Page 64
Dimension
A
.465 [11.82]
.777 [19.74]
1.089 [27.66]
1.401 [35.58]
Part Number
Tube Loaded (Pcs. per Tube)
1-1318301-2 (40)
1-1318301-3 (24)
1-1318301-4 (17)
1-1318301-5 (13)
Bulk Pack
1-1123724-2
1-1123724-3
1-1123724-4
1-1123724-5
AMP EP
.312 [7.92]
Number of
Positions
2
3
4
5
Mating Height
(Low-Profile)
Mating Height
.642 [16.3]
68
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Plug Housing and
Post Header, High-Profile
1 Position Plug Housing
Part Number 1-1123823-1
.571
[14.5]
.150 [3.8]
.207 [5.3]
.244 [6.2]
.169 [4.3]
.224 [5.7]
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
.039 [1.0]
Section X-X
Related Product Data
Contacts — Page 64
Mating Post Header — See below
1 Position Post Header,
Straight
Part Numbers
1-1123824-1 (Bulk Pack)
1-1318831-1 (Tube Loaded,
55 pcs. per Tube)
.118
[3.0]
.528
[13.4]
.347 .252
[8.8] [6.4]
.327 Max.
[8.3]
Urethane Coating Area
Material and Finish
(RoHS Compliant)
.045 [1.14] Sq. Post
.128 [3.25]
.337 [8.55]
.118 [3.0]
.189 [4.8]
AMP EP
High-Profile 1 Position
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Post — Tin-plated brass
.146 [3.7]
Section X-X
.063 +.004/-0 Dia. Punched Hole
[1.60 +0.1/-0]
.079-.051+.004/-0 .065 +.004/-0 Dia. Drilled Hole
[2-1.3+0.1/-0] [1.65 +0.1/-0]
Component Mounting Side
Related Product Data
Mating Plug Housing — See above
.079-.032±.004
[2-0.8±0.1]
.154 [3.9] Max. Dia.
Eyelet
PC Board
.079-.142±.004
[2-3.6±0.1]
.197 [5.0]
Max. Dia.
.158±.004 [4.0±0.1]
.315±.004 [8.0±0.1]
Soldering Side
Recommended PC Board Layout
Acceptable Board Thickness
.062 [1.57]
Mating Height
(High-Profile)
Mating Height
.732 [18.6]
Potting Height
.327 [8.3] Max.
Retention Lock
69
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Wire Selection
Proper wire selection is critical
to the success of a wire-toboard application. The chart
identifies wires that have been
evaluated and approved by the
product engineering section.
If you plan to use a wire not
on the approved list, please
submit a sample 12" length of
wire to Tyco Electronics for
evaluation.
AWG Metric Equivalents
18 —0.8 –0.9 mm2
20 —0.5 –0.6 mm2
22 —0.3 –0.4 mm2
24 —0.2 mm2
26 —0.12 –0.15 mm2
28 —0.08 –0.09 mm2
Product Specifications
108-1050 — MTA-100 Connectors
108-1050-1— MTA-100 Posted
Connectors
108-1051 — MTA-156 Connectors
108-1219 — MTA-156 Quad Connector
System
108-1065 — MTA-156 Posted
Connectors
108-1058 — MTA-156 Card Edge
Connectors
MTA Connectors Approved Wire Listing
MTA-100 Connectors
UL 1007 PVC Insulation
UL 1061 Semi-Rigid PVC Insulation
UL 1095 Semi-Rigid PVC Insulation
UL 1371 TEFLON Insulation — TFE
UL 1429 Irradiated PVC — X.L.P.V.C.
UL 2464 PVC
UL 3265 Irradiated Polyethylene — X.L.P.E.
UL 3266 Irradiated Polyethylene — X.L.P.E.
MIL-W-16878, Type B-PVC Insulation
UL 1213 TEFLON Insulation—T.F.E.
MTA-156 Connectors
UL 1007 PVC Insulation
UL 1061 Semi-Rigid PVC Insulation
UL 1180 TEFLON Insulation — T.F.E.
UL 1213 TEFLON Insulation — T.F.E.
UL 1316 PVC/Nylon Wall
UL 1429 Irradiated PVC — X.L.P.V.C.
UL 1430 Irradiated PVC — X.L.P.V.C.
UL 1569 PVC
UL 3265 Irradiated Polyethylene — X.L.P.E.
UL 3266 Irradiated Polyethylene — X.L.P.E.
Wall
.015″ [0.381]
.009″ [0.229]
.012″ [0.305]
.006″ [0.152]
.010″ [0.254]
.013″ [0.330]
.010″ [0.254]
.015″ [0.381]
.010″ [0.254]
.010″ [0.254]
Approved Wire AWG
22, 24, 26, 28
22, 24, 26, 28
24
22, 26
22, 24, 26, 28
24
22, 24
22, 24
22
22
.015″ [0.381]
.009″ [0.229]
.015″ [0.381]
010″ [0.254]
.015″ [0.381]
.010″ [0.254]
.015″ [0.381]
.015″ [0.381]
.010″ [0.254]
.015″ [0.381]
18, 20, 22, 24
18, 20, 22, 24
22
18, 22, 24
18, 22
18, 20, 22, 24
18, 20, 22, 24
18
22
18, 20, 22, 24
Note: When selecting approved wire styles noted on this list, the MTA Application Specifications guidelines must be
followed. Also, due to wire variations in insulation wall thickness, hardness and wire stranding we would recommend evaluating the wire selected before final application approval.
TEFLON is a trademark of E.I. DuPont de Nemours and Company.
Application Specifications
114-1019 — MTA-100 Connectors
114-1020 — MTA-156 Connectors
114-1031 — MTA-100 Ribbon Cable
Connector Assembly
114-1032 — MTA-156 Ribbon Cable
Connector Assembly
114-1048 — MTA-156 Quad Connector
MTA-100 Ribbon Cable Preparation
.036-.046 Standard
(.046-.052 Allowable for
26-28 AWG Wire Only)
.036-.046 Standard
(.046-.052 Allowable for
26-28 AWG Wire Only)
Dead-End Notch
Feed-Thru Notch
.280-.450†
[7.112-11.43]
MTA
Wire Selection
MTA-156 Ribbon Cable Preparation
.500-1.000†
[12.70-25.40]
.156
[3.96]
(Typ.)
Conductor
.064 [1.63]
Typ. (Max.)
After Notching
Feed-Thru Notch
.400-.600†
[10.16-15.24]
Insulation
Web
.050 [1.27]
Dia. (Max.)
For Mass Terminating
.062-.080
[1.57-2.03]
Flush-Mount Notch
.400-.800†
[10.16-20.32]
.100
[2.54]
(Typ.)
.062-.080
[1.57-2.03]
Ribbon Cable End View
Insulation
Conductor
Web
.070 [1.78]
Dia. (Max.)
For Mass Terminating
.094 [2.39]
Typ. (Max.)
After Notching
† The dimensions shown represent the recommended minimum and maximum for notches;
the actual dimension will depend on your application requirements.
Notes:
1. Cable shall be notched, as indicated in the individual ribbon cable connector assembly drawing, according to the
requirements specified in these figures. Conductor shall not be exposed after notching, nor shall individual wire
stands be cut or nicked.
2. U.L. Style #2651 ribbon cable is approved for use with MTA-100 and MTA-156 connectors per Application
Specification 114-1031 and 114-1032.
Ribbon Cable
–A–
.010
Notes:
1. For MTA Cable Assemblies
Contact US Engineering
Cable Assembly Group.
2. For IDC Cable, see pages
71 thru 74.
A
Per Inch of Cable Width
Cable Edge-to-End Alignment
(Ends of the cable shall be prepared as indicated in this figure)
70
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
IDC Ribbon Cable
Product Facts
■
Compatible with a variety
of Insulation Displacement
Connectors
■
Available on .025 [0.63],
.0394 [1.00], .050 [1.27],
.100 [2.54] and .156 [3.96]
centerline
■
Color code edge mark on
conductor #1
■
Gray flame retardant
flexible PVC insulation
■
Insulation rated for
temperature of
-20°C to +105°C
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E53793
R
The .100 [2.54] centerline
cable is available in 28 to
22 AWG, either as tinned or
as overcoated tinned wire,
in 2 to 28 conductors.
The .156 [3.96] centerline
is available in 22 AWG and
18 AWG, either as tinned
or overcoated tinned, in
2 to 24 conductors.
IDC Ribbon Cable is
produced to tighter standards than usually required
for high yield insulation
displacement terminations.
The extra precision offers
uncomplicated operation in
fully automatic stripping,
notching and termination
equipment.
IDC
Ribbon Cable
Tyco Electronics Corporation
has an expanding array of
MADISON CABLE planar
PVC insulated product
designed for compatibility
with a variety of Insulation
Displacement Connectors.
AMP IDC terminations offer
a quick, reliable, cost-effective cabling system which
can be automated.
.050 [1.27] Centerline, IDC Ribbon Cable
Product Specifications
Voltage Rating — 30 VAC
Component Recognized by UL to
US and Canadian Standards —
AWM Style 2651
Sizes —
26 AWG, 7/34 Tinned copper, PVC
insulation (9 – 64 conductors), 500-ft
reels (Base AMP Part Number 57034)
28 AWG, 7/36 Tinned copper, PVC
insulation (9 – 64 conductors), 100-ft
reels (Base AMP Part Number 57040)
and 500-ft reels (Base AMP Part
Number 971111)
30 AWG, Other conductor counts available on request. For ordering information, call Toll-Free: 1-877-623-4766 or
visit: http://www.madisoncable.com/
fsproducts.htm
71
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.100 [2.54] Centerline, IDC Ribbon Cable, PVC Insulation
Product Specifications
B
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
A
.050 [1.27] Typ.
C
.010 [0.25]
.100
[2.54]
Typ.
Edge Mark
IDC
Ribbon Cable
No. of
Conductors
Dimensions
B
A
Part
Number
C
Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation Thickness
Temperature Rating — -20°C to +105°C
Flammability — UL: VW1
No. of
Conductors
A
Dimensions
B
C
Part
Number
28 AWG 7/32 Tinned Copper
2
0.100 [2.54]
5
0.400 [10.16]
10
0.900 [22.86]
15
1.400 [35.56]
20
1.900 [48.26]
25
2.400 [60.96]
28
2.700 [68.58]
0.200 [5.08]
0.500 [12.70]
1.000 [25.40]
1.500 [38.10]
2.000 [50.80]
2.500 [63.50]
2.800 [71.12]
0.044
0.044
0.044
0.044
0.044
0.044
0.044
[1.12]
[1.12]
[1.12]
[1.12]
[1.12]
[1.12]
[1.12]
02WFY00006P
05WFY00006P
10WFY00006P
15WFY00006P
20WFY00006P
25WFY00006P
28WFY00006P
24 AWG 7/32 Overcoated Tinned Copper
2
0.100 [2.54] 0.200 [5.08]
5
0.400 [10.16] 0.500 [12.70]
10
0.900 [22.86] 1.000 [25.40]
15
1.400 [35.56] 1.500 [38.10]
20
1.900 [48.26] 2.000 [50.80]
25
2.400 [60.96] 2.500 [63.50]
28
2.700 [68.58] 2.800 [71.12]
0.044
0.044
0.044
0.044
0.044
0.044
0.044
[1.12]
[1.12]
[1.12]
[1.12]
[1.12]
[1.12]
[1.12]
02WFY00007P
05WFY00007P
10WFY00007P
15WFY00007P
20WFY00007P
25WFY00007P
28WFY00007P
26 AWG 7/34 Tinned Copper
2
0.100 [2.54]
5
0.400 [10.16]
10
0.900 [22.86]
15
1.400 [35.56]
20
1.900 [48.26]
25
2.400 [60.96]
28
2.700 [68.58]
0.200 [6.08]
0.500 [12.70]
1.000 [25.40]
1.500 [38.10]
2.000 [50.80]
2.500 [63.50]
2.800 [71.12]
0.039
0.039
0.039
0.039
0.039
0.039
0.039
[.99]
[.99]
[.99]
[.99]
[.99]
[.99]
[.99]
02WEY00008P
05WEY00004P
10WEY00012P
15WEY00002P
20WEY00008P
25WEY00008P
28WEY00008P
22 AWG 7/30 Tinned Copper
2
0.100 [2.54]
5
0.400 [10.16]
10
0.900 [22.86[
15
1.400 [35.56]
20
1.900 [48.26]
25
2.400 [60.96]
28
2.700 [68.58]
0.051
0.051
0.051
0.051
0.051
0.051
0.051
[1.30]
[1.30]
[1.30]
[1.30]
[1.30]
[1.30]
[1.30]
02WGY00001P
05WGY00006P
10WGY00002P
15WGY00006P
20WGY00006P
25WGY00006P
28WGY00006P
26 AWG 7/34 Overcoated Tinned Copper
2
0.100 [2.54] 0.200 [5.08]
5
0.400 [10.16] 0.500 [12.70]
10
0.900 [22.86] 1.000 [25.40]
15
1.400 [35.56] 1.500 [38.10]
20
1.900 [48.26] 2.000 [50.80]
25
2.400 [60.96] 2.500 [63.50]
28
2.700 [68.58] 2.800 [71.12]
0.039
0.039
0.039
0.039
0.039
0.039
0.039
[.99]
[.99]
[.99]
[.99]
[.99]
[.99]
[.99]
02WEY00007P
05WEY00007P
10WEY00007P
15WEY00007P
20WEY00007P
25WEY00007P
28WEY00007P
0.200 [5.08]
0.500 [12.70]
1.000 [25.40]
1.500 [38.10]
2.000 [50.80]
2.500 [63.50]
2.800 [71.12]
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of
Tyco Electronics Corporation, for engineering questions or for
order placement of this cable.
72
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.156 [3.96] Centerline, Flat Ribbon Cable, PVC Insulation
Product Specifications
B
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
A
.078 [1.98] Typ.
C
.010
[0.25]
.156
[3.96]
Typ.
Edge Mark
No. of
Conductors
A
Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation
Thickness
Temperature Rating — –20°C to +105°C
Flammability — UL: VW1
Dimensions
B
C
Part
Number
22 AWG 7/30 Tinned Copper
2
0.156 [3.96]
5
0.624 [15.85]
10
1.404 [35.66]
15
2.184 [55.47]
20
2.964 [75.29]
24
3.588 [91.14]
0.312 [7.92]
0.780 [19.81]
1.560 [39.62]
2.340 [59.44]
3.120 [79.25]
3.744 [95.10]
0.051
0.051
0.051
0.051
0.051
0.051
[1.30]
[1.30]
[1.30]
[1.30]
[1.30]
[1.30]
02WGY00008P
05WGY00008P
10WGY00008P
15WGY00008P
20WGY00008P
24WGY00008P
18 AWG 7/26 Tinned Copper
2
0.156 [3.96]
5
0.624 [15.85]
10
1.404 [35.66]
15
2.184 [55.47]
20
2.964 [75.29]
24
3.588 [91.14]
0.312 [7.92]
0.780 [19.81]
1.560 [39.62]
2.340 [59.44]
3.120 [79.25]
3.744 [95.10]
0.068
0.068
0.068
0.068
0.068
0.068
[1.73]
[1.73]
[1.73]
[1.73]
[1.73]
[1.73]
02WJY000001P
05WJY000010P
10WJY000010P
15WJY000010P
20WJY000010P
24WJY000010P
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of
Tyco Electronics Corporation, for engineering questions or for
order placement of this cable.
IDC
Ribbon Cable
73
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Prepared IDC Ribbon Cable
In addition to bulk cable,
the US Engineering Cable
Assembly Group offers
Prepared Cable for the .100
[2.54] and .156 [3.96] centerline cables. This can be
in the form of prenotched
cable on reels or cut-tolength cable segments.
IDC
Ribbon Cable
Prenotched 250 foot reels
of cable can be produced
with notches at varying
increments or repeating all
along the cable. The maximum width of these cables
is 20 conductor for the .100
[2.54] centerline and 13
conductor for the .156
[3.96] centerline.
Prepared Cable is also
available with a Strip and
Retain feature allowing the
cable assembly to be soldered directly to the PC
Board. This saves space
and cost and reduces
spare parts inventory. Strip
and Retain on both ends is
used in family board applications to maintain the
electrical connection when
the PC Board is separated
into smaller boards after
soldering. Widths are limited
to 20 conductors for the
.100 [2.54] centerline and
13 conductors for the .156
[3.96] centerline. However,
multiple cables can be
placed side-by-side in a
single connector. For other
styles and configurations
contact the product engineer or product manager.
74
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Wire Termination Flowchart
Choose the appropriate MTA Connector from the MTA Catalog 82056.
Select the proper wire style and AWG for the chosen MTA Connector
(Refer to pages 70-74).
Choose the MTA Termination Tooling (Refer to pages 76-79).
Terminate the Wire-to-MTA Connector per Application Tooling Instruction Sheet.
Inspect the MTA Wire Termination per Application Specification, especially the wire
depth. See illustrations: 114-13072 — MTA-50 Connectors, 114-1019 — MTA-100
Connectors, 114-1020 — MTA-156 Connectors, Posted Connector, Card Edge,
114-1048 — MTA-156 Quad Connectors, 114-1031 — MTA-100 Ribbon Cable
Connector Assembly, and 114-1032 — MTA-156 Ribbon Cable Connector Assembly.
B Min.
Top of
Contact
Conductor
Bare wires will not be visible
beyond back of housing
A
Centerline of Conductor
Bare wires
will not extend
above top of contact
Back of Housing
Insulation Strain Relief
MTA-100
Conductor
Insulation will be contained
within the confines of the
insulation strain relief as indicated
MTA-156
A
.069–.087
[1.75-2.21]
.090–.113
[2.29-2.87]
MTA Wire Termination
Flowchart
Connector
B
.040
[1.02]
.060
[1.52]
Adjust the Termination Tooling (if needed) per Tooling Instruction Sheet
(repeat the step above).
75
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options
Note: Max. Insulation Outside Diameter Wire:
.060 [1.52] for MTA-100 Connectors /.095 [2.41] for MTA-156 Connectors
One-At-A-Time Termination Tooling Part Numbers
MTA Connector
Assembly
MTA-50
Interchangeable Head and Interchangeable Head and
Interchangeable Head
Loose-Piece Feed Track
Tape Feed Track
T-Handle✔
Manual Hand Tool 58074-1
Special
Air
Bench
Mount
Air
Bench Mount
Air Hand Tool 58075-1
Applicator Maintenance
Tool
58338-1
Tool
58338-1
Tool
Air Bench Mount Tool 58338-1
Electric Bench
Electric Bench
Electric Bench Machine 931800-1
Machine 931800-1
Machine 931800-1
Closed End
Feed Thru
1583503-1
58246-1 (Standard)*n
58246-2 (Ext Wear)*
58246-3 (Ribbon Cable)
58442-1
Closed
End
MTA-100
Connector Feed Thru
Posted
(Closed-End)
*Repair Kit 856600-1
—
—
933567-1
853546-1 & 853542-1
(Base)
466728-1
59803-1
—
—
—
59803-1
—
—
59803-1
933568-1
853547-1 & 853542-1
(Base)
466727-1
59804-1
—
—
—
59804-1
58082-1
—
—
—
59804-1
58061-1
—
—
567020-1
59839-1
58392-1
—
—
—
59804-1
58247-1 (Standard)**
58247-2 (Ext Wear)
58247-3 (Ribbon Cable)
58443-1
MTA-156
Connector Feed Thru
Posted
(Closed-End)
MTA-156
Closed
Card-Edge
End
MTA-156
Closed
Quad
End
—
—
58638-1
Closed
End
—
Notes:
1. A repair kit consists of a cam,
a feed-slide sub-assembly
and a locating pawl.
Repair kits can be made
available for other interchangeable heads. Consult
Tyco Electronics.
2. Standard modular heads
58246-1 and 58247-1 are
recommended for low
volume use.
3. Extended wear modular
heads 58246-2 and 58247-2
are recommended for high
volume use.
4. T-Handle Maintenance Tools
are for maintenance (field)
use only. They are not recommended for production.
5. Some Manual Hand Tool
Assemblies are available:
a. Order 58579-1, comprised
of Head 58246-1 with
Manual Hand Tool 58074-1.
b. Order 58580-1, comprised
of Head 58247-1 with
Manual Hand Tool 58074-1.
c. Order 58639-1, comprised
of Head 58638-1 with
Manual Hand Tool 58074-1.
**Repair Kit 856600-2
MTA-50 Mass Termination Tooling Part Numbers
Manual Arbor Frame (with slide)
Part Number 1583518-1*
Upper Tooling
Part Number 1583514-1*
Fixture, Discrete Wire, Closed End
Part Number 1583515-1 (28-26 AWG)
Part Number 1583515-2 (30-28 AWG)
Fixture, Discrete Wire, Feed-Thru
Part Number 1583516-1 (28-26 AWG)
Part Number 1583516-2 (30-28 AWG)
Fixture, Ribbon Cable, Closed End or
Feed-Thru
Part Number 1583517-1
*Required, plus appropriate Fixture(s).
MTA-100 and MTA-156 Mass Termination Tooling Part Numbers
Interchangeable Head
Part Number
Used With
MTA Connector
Assembly
Closed End
—
—
Feed Thru
58644-1 (Discrete Wire)
58644-2 (Notched Cable)†
58074-1 (Man Hd Tl)
—
—
—
—
†
Application
Tooling
MTA-100
Connector
MTA-156
Connector
Closed End
(Posted)
Feed Thru
(Posted)
Closed End
—
—
Feed Thru
58646-1 (Discrete Wire)††
58646-2 (Notched Cable)††
58074-1 (Man Hd Tl)
Card Edge
—
—
Closed End
(Posted)
—
—
Feed Thru
(Posted)
—
—
Note: Max. Insulation Outside Diameter Wire:
.050 [1.27] for MTA-100 Connectors /.070 [1.78] for MTA-156 Connectors
Harness Board Holding Fixture
Used With
Part Number
Applicator
Tooling
Assembly
Assembly
58242-1
—
58242-3
58575-1
Manual Bench
58243-1
—
Tool 58024-1
58243-3
58575-1
and Tooling
Assembly
58635-1
58575-1
58039-1
—
—
—
—
58575-1
—
—
—
58576-1
—
58576-1
—
58576-1
—
854176-1 &
854200-1 (Base)
312522-1
—
—
—
—
58576-1
—
—
58010-2
58576-1
—
—
—
—
—
—
—
58244-1
58244-3
—
58576-1
Feed Thru
—
—
58245-1
58245-3
—
58576-1
2- through 12-positions.
312522-1
58636-1
—
†
854175-1 &
854200-1 (Base)
58244-1
58244-3
58245-1
58245-3
59848-1
59848-3
58009-1
58009-2
Closed End
MTA-156
Quad
Interchangeable Head
and Tape Feed Track
Part Number
Used With
Manual Bench
Tool 58024-1
and Tooling
Assembly
58040-1
Manual Bench
Tool 58024-1
and Tooling
Assy 58040-1
58024-1 and
Tooling Assy
58040-1
2- through 8-positions.
††
76
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options (Continued)
One-At-A-Time Termination
Tooling (Typical Tooling
Combinations)
Manual Hand Tool with
Interchangeable Head
Air Hand Tool with
Interchangeable Head
Air Bench Mount Tool with
Interchangeable Head and
Foot Switch
Electric Bench Machine with
Interchangeable Head
Power Units
Manual Hand Tool —
Pistol Grip Handle
Part No. 58074-1
■
■
■
Air Hand Tool —
Pistol Grip Pneumatic Handle
Part No. 58075-1
Easy to use
Ratchet control will not
release the trigger until it
is fully bottomed
Head may be rotated for
user convenience
■
■
■
Light weight
Operates at air pressure
between 40 and 70 psi
[2.76 and 4.83 bar]
Head may be rotated for
user convenience
Air Bench Mount Tool —
Bench Mount Power Assembly
Part No. 58338-1
■
■
■
May be mounted with
interchangeable head
pointed up or down
Operated by a foot
switch
Operates at air pressure
between 40 and 70 psi
[2.76 and 4.83 bar]
Electric Bench Machine with
Interchangeable Head and
Tape Feed Track
Air Bench Mount Tool with
Interchangeable Head and Loose-Piece Feed Track
Electric Bench Machine —
IDC Power Unit
Part No. 931800-1
■
■
■
All electric: 120 VAC,
60 Hz, 2 A
Compact, portable and
quiet
Operated by a foot
switch
AMP-O-LECTRIC Bench
Machine with Special Applicator
Interchangeable Heads and Applicators (Refer to page 76 for part numbers.)
■
■
■
Terminates one
unstripped wire per cycle
Aligns and holds the
connector in place for
each termination
Automatically advances
the connector after each
termination
Interchangeable Head and
Loose-Piece Feed Track
■
■
■
No special setup required
Connectors are easily
loaded into feed track
Connectors are fed using
a simple spring-loaded
pusher
Interchangeable Head and
Tape Feed Track
■
■
■
No special setup required
Tape-mounted connectors
are transferred from product reel to feed track by
simply pulling on the free
end of the carrier tape
Connectors are fed using
a simple spring-loaded
pusher
Special Applicator
■ Connectors are easily
hand loaded into feed
track
■ Automatically advances
the connector after each
termination
■ Cannot be cycled until
the connector is properly
positioned
Application
Tooling
Interchangeable Head
T-Handle Maintenance Tool
77
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options (Continued)
Mass Termination Tooling
(Typical Tooling
Combinations)
Manual Bench Tool with
Applicator and Holding Fixture
Air Harness Tool with
Applicator
Air Bench Machine
2700 lb Air Bench Machine with
Ribbon Cable Notcher Assembly
Power Units
Manual Bench Tool —
Arbor Frame Assembly
Part No. 58024-1
■
■
■
Applicator and holding
fixture can be oriented for
operator convenience for
closed-end or feed-thru
terminations
Ram height (insertion
depth) is easily adjusted
May be bench mounted
Air Harness Tools —
Hand-Held Power Unit
with Applicator
Part No. 58575-1 (MTA-100)
Part No. 58576-1 (MTA-156)
■
■
■
Applicator can be rotated
360° for orientation with
holding fixture
Insertion depth is easily
adjusted
Operates at air pressure
between 75 and 95 psi
[5.17 and 6.55 bar]
2700 lb Air Bench Machine —
Part No. 312522-1
Air Bench Machine —
Pneumatic Unit
Part No. 91112-2
Operated by a foot
switch
Operates at air pressure
between 80 and 90 psi
[5.52 and 6.21 bar]
Not recommended for
notching cable with more
than 14 conductors
■
■
■
■
Operated by a foot
switch
■
Capable of exerting
2,700 lb [12,000 N] of
force at minimum 80 psi
[5.52 bar] air pressure
■
May be bench mounted
Applicators and Notcher Assemblies
Ribbon Cable Notcher Assembly
■
■
Manual Bench Tool with Applicator and Tape Feed Track
■
Applicator and Holding Fixture
Application
Tooling
■
■
■
Wires are laced into
plastic combs for mass
termination
Trims excess wire for
closed-end terminations
Holding fixture may be
mounted to a harness
board
Applicator and Tape Feed Track
■
■
■
Tape-mounted connectors
are transferred from product reel to feed track by
simply pulling on the free
end of the carrier tape
Connectors are fed using
a simple spring-loaded
pusher
Feed stop easily adjusted
for different connector
sizes
Notch cable with up to
28 conductors for .100
centerline, and 24
conductors for .156
centerline
Pressure plate holds
cable in position during
notching
Scrap conveniently
removed through a chute
with a blast of air from a
built-in air valve
Ribbon Cable Notcher
Assembly
Wire Size
AWG
Centerline
Used With
854449-2
26-28
854449-4
22-28
.100
2.54
.100
2.54
854449-3
18-24
.156
3.96
Manual Bench Tool
58024-1
Air Bench Machine
91112-2
2700 lb Bench Machine
312522-1
AMP-O-LECTRIC
Bench Machine 1-471273-3
(with Conversion Kit 690675-2)
Part Number
Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC
Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb
Air Bench Machine.
78
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options (Continued)
The following is a list of technical documents covering the installation, operation, adjustment,
maintenance and repair of MTA application tooling.
Technical Documents
Instruction Sheets (IS) provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
Customer Manuals (CM) provide complete, detailed instructions on the installation, operation,
adjustment, maintenance and repair of complex tools and application machines.
Applicator Instructions (AI) are similar to instruction sheets (which cover products and tools), and
provide instructions for installation, adjustment and maintenance of applicators used in automatic and semiautomatic machines.
Hand Tools, Power Units & Accessories
Manual Arbor Frame (MTA-50)
Upper Tooling (MTA-50)
Manual Arbor Frame Assembly
Ribbon Cable Applicator, .100
Ribbon Cable Applicator, .156
Manual Hand Tool
Air Bench Mount Tool
Air Hand Tool (MTA-100)
Air Harness Tool (MTA-156)
T-Handle Maintenance Tool (MTA-100)
T-Handle Maintenance Tool (MTA-156)
Air Arbor Frame Assembly
1583518-1
1583514-1
58024-1
58039-1
58040-1
58074-1
58338-1
58575-1
58576-1
59803-1
59804-1
91112-2
IS 408-8812
IS 408-8812
IS 408-6923
IS 408-6685
IS 408-6701
IS 408-6790
IS 408-9393
IS 408-4260
IS 408-4260
IS 408-7907
IS 408-7907
IS 408-7763
2700 lb Air Bench Machine
Terminator Assembly, "G" Term
AMP-O-LECTRIC Bench Machine
Conversion Kit
Base Assembly
Base
Adapter (AMP-O-LECTRIC)
Adapter (2700 lb Machine)
Repair Kit
Repair Kit
Electric Bench Mount Tool
312522-1
354500-1
1-471273-3
690675-2
853542-1
854200-1
854468-1
854468-2
856600-1
856600-2
931800-1
CM 409-5843
CM 409-5842
CM 409-5128
IS 408-8022
IS 408-9636
IS 408-9650
IS 408-9687
IS 408-9687
IS 408-9745
IS 408-9745
CM 409-5746
One-At-A-Time Termination Tooling
Interchangeable Heads
MTA-50
1583503-1
IS 408-8801
MTA-100
58246-1
IS 408-6929
58246-2
IS 408-9379
58246-3
IS 408-4147
58442-1
IS 408-9603
58638-1
IS 408-4358
58247-1
58247-2
58247-3
58443-1
58061-1
58082-1
58392-1
MTA-156
IS
IS
IS
IS
IS
IS
IS
58242-1
58242-3
58243-1
58635-1
58636-1
58644-1
58644-2
59844-1
59845-1
59845-3
MTA-100
IS
IS
IS
IS
IS
IS
IS
IS
IS
IS
408-6930
408-9380
408-4146
408-9607
408-6794
408-6795
408-9450
Interchangeable Head & Loose Piece Feed Track
MTA-100
MTA-156
933567-1
IS 408-9435
933568-1
IS 408-9466
Interchangeable Heads & Tape Feed Track
MTA-100
MTA-156
853546-1
IS 408-9636
853547-1
IS 408-9637
Special Applicators
MTA-100
MTA-156
466728-1
AI 408-8054
466727-1
AI 408-8054
567020-1
AI 408-8069
Mass Termination Tooling
MTA-50
1583515-1
IS
1583515-2
IS
1583516-1
IS
1583516-2
IS
1583517-1
IS
408-8812
408-8812
408-8812
408-8812
408-8812
Typical Application Rates
408-7994
408-7994
408-7994
408-7994
408-7994
408-4406
408-4440
408-7994
408-7994
408-7994
58009-1
58009-2
58010-2
58244-1
58244-3
58245-1
58245-3
58646-1
58646-2
59848-1
59848-3
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Discrete Wire
Terminations
Per Hour
Method
—
854176-1
MTA-156
IS 408-9650
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Ribbon Cable*
Method
Terminations
Per Hour
2700 lb Air Bench Machine 312522-1 with
Applicator and Tape Feed Track
854175-1 and 854200-1 (Base)
7,500
Application
Tooling
Manual Hand Tool 58074-1 with
Interchangeable Head 58246-1
Electric Bench Machine 931800-1 with
Interchangeable Head 58246-1
Electric Bench Machine 931800-1 with
Interchangeable Head and
Loose-Piece Feed Track 933567-1
Electric Bench Machine 931800-1 with
Interchangeable Head and Tape Feed Track
853546-1 and 853542-1 (Base)
Die Set Assembly
MTA-100
854175-1
IS 408-9667
MTA-156
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-4405
IS 408-4439
IS 408-7995
IS 408-7995
900
1,100
1,250
* Procedure: Mass terminate 12-conductor ribbon cable with three
connectors per end. After terminating, separate by tearing the
12-conductor assembly into three 4-conductor assemblies.
Cable Notching
Cable Ends
Per Hour
Method
2700 lb Air Bench Machine 312522-1 with
Ribbon Cable Notcher Assembly 854449-2
and 854468-2 (Adapter)
Apply One 4-Position MTA-100 Feed-Thru
Connector per Assembly, Discrete Wire
1,000
Terminations
Per Hour
Method
Manual Bench Tool 58024-1 with
Applicator and Holding Fixture
650
For further information about tooling call Technical Support.
79
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos.
(with prefixes and/or suffixes) are shown
on the page(s) indicated.
Part Number Index
Part No.
02WEY00007P
02WEY00008P
02WFY00006P
02WFY00007P
02WGY00001P
02WGY00008P
02WJY000001P
05WEY00004P
05WEY00007P
05WFY00006P
05WFY00007P
05WGY00006P
05WGY00008P
05WJY000010P
10WEY00007P
10WEY00012P
10WFY00006P
10WFY00007P
10WGY00002P
10WGY00008P
10WJY000010P
15WEY00002P
15WEY00007P
15WFY00006P
15WFY00007P
15WGY00006P
15WGY00008P
15WJY000010P
20WEY00007P
20WEY00008P
20WFY00006P
20WFY00007P
20WGY00006P
20WGY00008P
20WJY000010P
24WGY00008P
24WJY000010P
25WEY00007P
25WEY00008P
25WFY00006P
25WFY00007P
25WGY00006P
28WEY00007P
28WEY00008P
28WFY00006P
28WFY00007P
28WGY00006P
57034
57040
350980
640250
640251
640252
640383
640384
640385
640387
640388
Page
72
72
72
72
72
73
73
72
72
72
72
72
73
73
72
72
72
72
72
73
73
72
72
72
72
72
73
73
72
72
72
72
72
73
73
73
73
72
72
72
72
72
72
72
72
72
72
71
71
59, 60
60
60
59, 60
46
46
47
49
48
Part No.
640389
640426
640427
640428
640429
640430
640431
640432
640433
640434
640435
640440
640441
640442
640443
640445
640452
640453
640454
640455
640456
640457
640468
640469
640470
640471
640472
640473
640474
640475
640476
640477
640478
640479
640480
640481
640550
640551
640556
640557
640558
640559
640595
640599
640600
640601
640602
640604
640605
640606
640607
640608
640620
640621
640622
640623
640629
640630
640631
640632
640633
640634
Page
49
37
37
37
37
37
37
37
37
37
37
15
15
15
15
48
21
21
23
23
24
24
15
15
15
15
37
37
37
37
37
37
37
37
37
37
16
40
41
41
41
41
39
39
39
39
39
39
39
39
39
39
15
15
15
15
42
42
41
41
41
41
Part No.
640635
640636
640637
640638
640639
640642
640643
640706
640707
640708
640709
640859
640860
640861
640862
640863
640864
640865
640866
640867
640868
641101
641106
641113
641114
641115
641118
641119
641120
641121
641122
641123
641124
641125
641126
641127
641143
641144
641145
641146
641147
641148
641149
641150
641151
641152
641153
641154
641155
641156
641157
641168
641169
641170
641171
641172
641173
641174
641175
641176
641177
641186
Page
41
17
17
17
17
16
40
59
59
17
17
56
56
56
56
56
56
56
56
56
56
57
57
46
46
47
49
48
48
49
21
21
23
23
24
24
41
41
41
41
41
37
37
37
37
37
37
37
37
37
37
39
39
39
39
39
39
39
39
39
39
17
Part No.
641187
641188
641189
641190
641191
641192
641193
641198
641199
641200
641201
641202
641203
641204
641207
641208
641209
641210
641211
641212
641213
641214
641215
641216
641217
641218
641219
641220
641221
641222
641223
641224
641225
641226
641227
641228
641229
641230
641231
641232
641233
641234
641235
641236
641237
641238
641239
641240
641241
641242
641243
641244
641283
641284
641285
641286
641287
641288
641289
641290
641291
641292
Page
17
17
17
15
15
15
15
15
15
15
15
46
46
47
49
48
48
49
21
21
23
23
24
24
37
37
37
37
37
37
37
37
37
37
39
39
39
39
39
39
39
39
39
39
15
15
15
15
15
15
15
15
56
56
56
56
56
56
56
56
56
56
80
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Part Number Index (Continued)
Page
57
39
39
39
39
39
39
39
39
39
39
15
15
15
15
45
45
45
45
45
45
45
45
45
45
42
45
45
45
45
45
42
15
15
15
15
59
42
17
17
17
17
15
15
15
15
17
40
40
16
16
15
15
15
15
15
37
37
37
37
37
15
Part No.
643995
644020
644038
644040
644042
644043
644044
644082
644083
644284
644312
644313
644329
644370
644371
644375
644376
644377
644381
644382
644383
644387
644388
644389
644456
644457
644460
644461
644462
644463
644464
644465
644466
644467
644468
644469
644470
644471
644472
644486
644487
644488
644489
644497
644501
644502
644508
644509
644510
644511
644512
644513
644514
644540
644563
644564
644565
644566
644567
644569
644570
644572
Page
45
15
15
15
15
15
15
37
15
37
15
15
55
55
55
55
55
55
55
55
55
55
55
55
22
22
37
37
37
37
37
39
39
39
39
39
39
39
39
30
30
30
30
15
37
37
55
55
55
15
15
15
15
15
15
15
15
37
39
39
39
39
Part No.
644574
644575
644576
644577
644578
644579
644611
644612
644613
644614
644615
644616
644617
644627
644628
644629
644630
644631
644632
644633
644662
644663
644687
644694
644695
644702
644718
644720
644726
644749
644750
644751
644752
644753
644754
644755
644756
644757
644758
644759
644760
644761
644762
644763
644764
644765
644766
644767
644768
644769
644783
644791
644795
644803
644807
644809
644812
644814
644860
644861
644874
644875
Page
15
15
15
15
15
15
50
50
51
51
50
50
51
50
50
51
51
50
50
51
37
37
37
22
22
15
39
39
15
46
46
47
48
48
49
49
46
46
47
48
48
49
49
46
46
47
48
48
49
49
37
37
15
30
45
45
45
45
37
30
24
24
Part No.
644876
644877
644878
644884
644885
644886
644887
644888
644889
644890
644891
644892
644893
644894
644896
644897
644898
647000
647001
647002
647003
647004
647005
647006
647007
647008
647009
647010
647011
647012
647013
647014
647015
647016
647017
647018
647019
647020
647021
647022
647023
647030
647031
647032
647033
647047
647048
647050
647051
647075
647076
647078
647079
647106
647107
647108
647109
647114
647116
647117
647123
647124
Page
23
23
37
22
22
22
22
22
22
22
22
32
32
32
32
32
32
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
27
27
28
28
27
27
28
28
29
29
29
27
27
28
28
53
53
Part Number Index
Part No.
641293
641301
641302
641303
641304
641305
641306
641307
641308
641309
641310
641311
641312
641313
641314
641425
641426
641427
641428
641429
641435
641436
641437
641438
641439
641440
641522
641523
641524
641525
641526
641533
641534
641535
641536
641537
641550
641623
641643
641644
641645
641646
641653
641654
641655
641656
641994
643067
643071
643075
643077
643498
643813
643814
643815
643816
643817
643818
643819
643820
643821
643828
81
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Part Number Index (Continued)
Part No.
647125
647126
647127
647128
647131
647132
647133
647134
647135
647136
647139
647140
647141
647142
647143
647144
647166
647167
647168
647295
647296
647297
647298
647299
647300
647400
647401
647402
647406
647409
647466
647476
647477
Page
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
29
29
29
28
28
28
27
27
27
62
62
62
62
62
62
45
15
Part No.
647478
647479
647480
647481
647485
647496
647497
647609
647623
647624
647625
647626
647627
647628
647629
647630
647646
647648
647649
647651
647652
647653
647676
647689
647690
770258
770476
770522
770849
770894
971111
1123721
1123722
Page
37
39
15
45
62
39
45
25
25
25
25
25
25
26
26
26
47
52
52
26
26
26
65
65
64
59
59, 60
59
60
61
71
64
64
Part No.
1123723
1123724
1123823
1123824
1318300
1318301
1318831
1318912
1375819
1375820
1445120
1445121
1445123
1445124
1445125
1445126
1445169
1445170
1445171
1445172
1445173
1445174
1445336
1445341
1445342
1445343
1445344
1445345
1445346
1445347
1445348
1445349
1445350
Page
65
68
69
69
65
68
69
64
31
31
9
10
9
10
9
10
9
9
9
10
10
10
31
7
7
7
7
7
7
7
7
7
7
Part No.
1445351
1445352
1445353
1445354
1445355
1445356
1445357
1445358
1445359
1445360
1445361
1445362
1445363
1445364
1445365
1445366
1445367
1445368
1445369
1445370
1445371
1445372
1445373
1445374
1445375
1445376
1744017
1744020
1744036
1744037
1744048
1744055
1744056
Page
7
7
7
7
7
7
7
7
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
48
15
67
67
67
66
66
Application Tooling Part Number Index
Part No.
Part Number Index
58009
58010
58024
58039
58040
58061
58074
58075
58082
58242
58243
58244
58245
58246
58247
58338
58392
58442
58443
Page
76, 79
76, 79
76, 78, 79
76, 79
76, 79
76, 79
76, 77, 79
76, 77
76, 79
76, 79
76, 79
76, 79
76, 79
76, 79
76, 79
76, 77, 79
76, 79
76, 79
76, 79
Part No.
58517
58575
58576
58579
58614
58635
58636
58638
58639
58644
58646
59803
59804
59836
59837
59839
59845
59848
90471
Page
Part No.
Page
Part No.
31
79
79
76
59
79
79
79
76
79
79
79
79
17
41
76
79
79
59
91112
91579
312522
354500
466468
466727
466728
466747
466947
471273
567020
567373
567827
567828
567910
680211
690675
853542
853546
78, 79
64
76, 78, 79
79
59
76, 79
76, 79
17
59
78, 79
76, 79
31
31
59
31
59
78, 79
76, 79
76, 79
853547
854175
854176
854200
854449
854468
856600
931800
933567
933568
1385286
1583503
1583514
1583515
1583516
1583517
1583518
76, 78,
76, 78,
76,
76,
76,
76,
76,
76,
76,
76,
Page
76,
76,
76,
76,
78,
76,
76, 77,
76,
76,
76,
76,
76,
76,
76,
76,
79
79
79
79
78
79
79
79
79
79
64
79
79
79
79
79
79
82
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Global Contacts
Americas
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Fax:
+54-11-4733-2211
Brasil – São Paulo
Phone: +55-11-2103-6000
Fax:
+55-11-2103-6030
Canada – Toronto
Phone: +905-475-6222
Fax:
+905-474-5520
Product Information Center:
Phone: +905-470-4425
Fax:
+905-474-5525
Chile – Santiago
Phone: +56-2-345-0361
Fax:
+56-2-223-1477
Colombia – Bogota
Phone: +57-1-319-8959
Fax:
+57-1-319-8960
Mexico – Mexico City
Phone: +52-55-1106-0800
+01-800-733-8926
Fax:
+52-55-1106-0901
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax:
+54-11-4733-2083
United States
Harrisburg, PA
Phone: +1-717-564-0100
Fax:
+1-717-986-7575
Product Information Center:
Phone: +1-800-522-6752
Fax:
+1-717-986-7575
Troy, MI
Phone: +1-248-273-3359
Fax:
+1-248-273-3322
Asia/Pacific
Australia – Sydney
Phone: +61-2-9554-2600
Fax:
+61-2-9502-2556
Product Information Center:
Phone: +61-2-9840-8200
Fax:
+61-2-9634-6188
Japan – Kawasaki, Kanagawa
Phone: +81-44-844-8111
Fax:
+81-44-812-3207
Product Information Center:
Phone: +81-44-844-8013
Fax:
+81-44-812-3200
India – Bangalore
Phone: +91-80-285-40800
Fax:
+91-80-285-40820
Korea – Seoul
Phone: +82-2-3415-4500
Fax:
+82-2-3486-3810
Indonesia – Jakarta
Phone: +65-6482-0311
Fax:
+65-6482-1012
Malaysia – Selangor
Phone: +60-3-7805-3055
Fax:
+60-3-7805-3066
New Zealand – Auckland
Phone: +64-9-634-4580
Fax:
+64-9-634-4586
Singapore – Singapore
Phone: +65-6482-0311
Fax:
+65-6482-1012
Philippines – Makati City
Phone: +632-848-0171
Fax:
+632-867-8661
Taiwan – Taipei
Phone: +886-2-8768-2788
Fax:
+886-2-8768-2268
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax:
+852-2735-0243
Thailand – Bangkok
Phone: +66-2-955-0500
Fax:
+66-2-955-0505
Shanghai
Phone: +86-21-2407-1588
Fax:
+86-21-2407-1599
Vietnam – Ho Chi Minh City
Phone: +84-8-930-5546
Fax:
+84-8-930-3443
Europe/Middle East /Africa
Austria – Vienna
Phone: +43-1-905-60-0
Fax:
+43-1-905-60-1333
Product Information Center:
Phone: +43-1-905-60-1249
Fax:
+43-1-905-60-1251
France – Cergy-Pontoise Cedex
Phone: +33-1-3420-8888
Fax:
+33-1-3420-8600
Product Information Center:
Phone: +33-1-3420-8686
Fax:
+33-1-3420-8623
Belarus – Minsk
Phone: +375 17 237 47 94
Fax:
+375 17 237 47 94
France Export Divisions –
Cergy-Pontoise Cedex
Phone: +33-1-3420-8804
Fax:
+33-1-3420-8699
Belgium – Kessel-Lo
Phone: +32-16-352-300
Fax:
+32-16-352-355
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax:
+359-2-971-2153
Czech Republic and Slovakia
Czech Republic – Kurim
Phone: +420-541-162-111
Fax:
+420-541-162-223
Product Information Center:
Phone: +420-541-162-113
Fax:
+420-541-162-132
Denmark – Glostrup
Phone: +45-43-48-04-00
Fax:
+45-43-44-14-14
Egypt – Cairo
Phone: +202-419-2334
Fax:
+202-417-7647
Estonia – Tartu
Phone: +372-5138-274
Fax:
+372-7400-779
Finland – Helsinki
Phone: +358-95-12-34-20
Fax:
+358-95-12-34-250
Tyco Electronics Corporation
Germany – Bensheim
Phone: +49-6251-133-0
Fax:
+49-6251-133-1600
Product Information Center:
Phone: +49-6251-133-1999
Fax:
+49-6251-133-1988
Greece – Athens
Phone: +30-210-9370-396/397
Fax:
+30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax:
+36-1-289-1010
Product Information Center:
Phone: +36-1-289-1016
Fax:
+36-1-289-1017
Ireland – Dublin
Phone: +353-1-866-5612
Fax:
+353-1-866-5714
Israel – Petach-Tikva
Phone: +972-3-929-0999
Fax:
+972-3-919-1088
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax:
+39-011-4031-116
Product Information Center:
Phone: +39-011-4012-428
Fax:
+39-011-40-287-428
Lithuania and Latvia
Lithuania – Vilnius
Phone: +370-5-213-1402
Fax:
+370-5-213-1403
Product Information Center:
Phone: +370-5-211-3016
Fax:
+370-5-213-1403
South Africa – Port Elizabeth
Phone: +27-41-503-4500
Fax:
+27-41-581-0440
Netherlands – ’s-Hertogenbosch
Phone: +31-73-6246-246
Fax:
+31-73-6212-365
Product Information Center:
Phone: +31-73-6246-999
Fax:
+31-73-6246-998
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax:
+46-8-50-72-50-01
Norway – Nesbru
Phone: +47-66-77-88-50
Fax:
+47-66-77-88-55
Turkey – Istanbul
Phone: +90-212-281-8181/2/3
+90-212-282-5130/5430
Fax:
+90-212-281-8184
Poland – Warsaw
Phone: +48-22-4576-700
Fax:
+48-22-4576-720
Product Information Center:
Phone: +48-22-4576-704
Fax:
+48-22-4576-720
Romania – Bucharest
Phone: +40-21-311-3479/3596
Fax:
+40-21-312-0574
Russia – Moscow
Phone: +7-495-790-7902
Fax:
+7-495-721-1893
Product Information Center:
Phone: +7-495-790-7902-404
Fax:
+7-495-790-7902-401
Spain – Barcelona
Phone: +34-93-291-0330
Fax:
+34-93-201-7879
Switzerland – Steinach
Phone: +41-71-447-0447
Fax:
+41-71-447-0444
Ukraine – Kiev
Phone: +380-44-206-2265
Fax:
+380-44-206-2264
Product Information Center:
Phone: +380-44-206-2265
Fax:
+380-44-206-2264
United Kingdom –
Stanmore, Middlesex
Phone: +44-8706-080208
Fax:
+44-208-954-6234
Product Information Center:
Freephone (UK only):
+0800-267-666
Phone: +44-8706-080208
Fax:
+44-208-420-8095
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax:
+7-812-718-8193
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax:
+386-1561-3240
www.tycoelectronics.com
Tyco Electronics Corporation
Harrisburg, PA
82056–10K–MS–FP–6-08–OG3B