OMRON D3V-11

Miniature Basic Switch
D3V
Reliable Basic Switch with External Lever
• Available by 0.1 A, 6 A, 11 A, 16 A and 21 A models, all with
self-cleaning contacts. 0.1 A utilizes gold alloy crossbar
contacts for high reliability at low loads.
• Available with internally or externally fitted levers, and 2 fixing positions for external levers.
• Conforms to EN61058-1 UL1054.
• High Temperature models rated up to 200°C (D3V-6, D3V-01)
and 155°C (D3V-11) are available.
• RoHS Compliant.
Ordering Information
■ Model Number Legend
D3V -
1 2 3 4
1.
5 6 7
Ratings
21:
20 (4) A at 250 VAC
16:
16 (3) A at 250 VAC
11:
11 (3) A at 250 VAC
6:
6 (2) A at 250 VAC
01:
0.1 A at 125 VAC
2.
Contact Gap
None: 1 mm (F gap)
G:
0.5 mm (G gap)
3.
Actuator
None: Pin plunger
1:
Short hinge lever
2:
Hinge lever
3:
Long hinge lever
4:
Simulated roller lever
5:
Short hinge roller lever
6:
Hinge roller lever
4.
8
9
10
5.
Contact Form
1:
SPDT
2:
SPST-NC
3:
SPST-NO
6.
Terminals
A:
Solder terminals
C2:
Quick-connect terminal (#187)
C:
Quick-connect terminal (#250)
C6:
RAST5 terminal (#250)
Maximum Operating Force
5:
200 gf
4A:
125 gf
4:
100 gf
3:
50 gf
2:
25 gf
7.
Note: These OF values are for
the pin plunger models.
8.
Enclosure Material
None: Standard
T:
High Temperature
200°C for D3V-6, D3V-01
155°C for D3V-11
W2:
9.
EN60695-2-11/-12 Approved
(Glow wire flammability test method
with PTI = 250)
Mounting Hole Size
None: 3.1 mm
K:
2.9 mm
10. Special Code
None: Standard
H:
High Temperature (125°C)
E:
Special Rating: 21 (8) A
(D3V-21, only)
Hinge Position
None: Internal / Far from Plunger
M:
External / Far from Plunger
K:
External / Near Plunger
Miniature Basic Switch
D3V
73
■ Available Combinations
Model D3V-21
21 A
Rated current
OF
Contact
gap
Heat resistance Terminals
125 gf
D3V-16
D3V-11
D3V-6
D3V-01
16 A
11 A
6A
0.1 A
200 gf
100 gf
200 gf
100 gf
50 gf
200 gf
100 gf
50 gf
F/G
F/G
F/G
F
G
G
F
G
G
G
F
G
1 mm or
1 mm or 1 mm or
0.5 mm
1 mm 0.5 mm 1 mm 0.5 mm 0.5 mm 0.5 mm 1 mm 0.5 mm 0.5 mm
0.5 mm 0.5 mm
❍
❍
❍
❍
❍
#187
❍
❍
#250
❍
❍
❍
❍
RAST5
#187
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
#250
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
RAST5
EN60695-2-11
approved
W2: 105°C
F/G
1 mm or
0.5 mm
❍
#250
EN60695-2-11
approved
W2: 85°C
25 gf
❍
Standard (85°C) #187
Standard
(105°C)
50 gf
#187
❍
#250
❍
❍
❍
❍
❍
❍
❍
RAST5
High
temperature
H: 125°C
#187
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
#250
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
High
temperature
T: 155°C
#187
❍
❍
❍
❍
❍
#250
❍
❍
❍
❍
❍
#187
❍
❍
❍
❍
❍
❍
#250
❍
❍
❍
❍
❍
❍
❍
❍
RAST5
❍
RAST5
High
temperature
T: 200°C
RAST5
Note: 1. ❍: Available model.
2. Consult OMRON for specific models with standard approval.
■ List of Models
21 A (OF: 125 gf)
Actuator
---
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
74
Hinge position
(far from plunger)
Miniature Basic Switch
Contact form
SPDT
SPST-NC
[email protected]Ñ
[email protected]Ñ
Internal
[email protected]Ñ
[email protected]Ñ
External (M)
[email protected]Ñ [email protected]Ñ
Internal
[email protected]Ñ
External (M)
[email protected]Ñ [email protected]Ñ
[email protected]Ñ
Internal
[email protected]Ñ
External (M)
[email protected]Ñ [email protected]Ñ
[email protected]Ñ
[email protected]Ñ
SPST-NO
[email protected]Ñ
[email protected]Ñ
[email protected]Ñ
[email protected]Ñ
[email protected]Ñ
[email protected]Ñ
[email protected]Ñ
Internal
[email protected]Ñ
External (M)
[email protected]Ñ [email protected]Ñ
[email protected]Ñ
[email protected]Ñ
Internal
[email protected]Ñ
External (M)
[email protected]Ñ [email protected]Ñ
[email protected]Ñ
Internal
[email protected]Ñ
[email protected]Ñ
External (M)
[email protected]Ñ [email protected]Ñ
D3V
[email protected]Ñ
[email protected]Ñ
[email protected]Ñ
[email protected]Ñ
16 A (OF: 200 gf)
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
[email protected]●-D-Ñ
SPST-NO
[email protected]●-D-Ñ
Pin plunger
---
SPDT
[email protected]●-D-Ñ
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Contact form
SPST-NC
[email protected]●-D-Ñ
SPST-NO
[email protected]●-D-Ñ
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
16 A (OF: 100 gf)
Actuator
Hinge position
(far from plunger)
Pin plunger
---
SPDT
[email protected]●-D-Ñ
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Contact form
SPST-NC
[email protected]●-D-Ñ
SPST-NO
[email protected]●-D-Ñ
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
11 A (OF: 200 gf)
Actuator
Hinge position
(far from plunger)
Pin plunger
---
SPDT
[email protected]●-D-Ñ
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
• The @ in the model number is for the terminal code.
A:
Solder/quick-connect terminals (#187)
C2:
Quick-connect terminals (#187)
C:
Quick-connect terminals (#250)
C6
RAST5 terminals (#250)
• The ● in the model number is for the enclosure material
None: Standard
T:
High Temperature (200°C for D3V-6/-01, 155°C for D3V-11)
W2: EN60695-2-11/-12 conformity with PTI=250
• The Δ in the model number is for the mounting hole size.
None: 3.1 mm
K:
2.9 mm
• The ∇ in the model number is for the special code
None: Standard
H:
High Temperature (125°C)
E:
Special rating of 21A (8)A (for D3V-21 only)
Miniature Basic Switch
D3V
75
11 A (OF: 100 gf)
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
[email protected]●-D-Ñ
SPST-NO
[email protected]●-D-Ñ
Pin plunger
---
SPDT
[email protected]●-D-Ñ
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Contact form
SPST-NC
[email protected]●-D-Ñ
SPST-NO
[email protected]●-D-Ñ
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
11 A (OF: 50 gf)
Actuator
Hinge position
(far from plunger)
Pin plunger
---
SPDT
[email protected]●-D-Ñ
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Contact form
SPST-NC
[email protected]●-D-Ñ
SPST-NO
[email protected]●-D-Ñ
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
6 A (OF: 100 gf)
Actuator
Hinge position
(far from plunger)
Pin plunger
---
SPDT
[email protected]●-D-Ñ
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
• The @ in the model number is for the terminal code.
A:
Solder/quick-connect terminals (#187)
C2:
Quick-connect terminals (#187)
C:
Quick-connect terminals (#250)
C6
RAST5 terminals (#250)
• The ● in the model number is for the enclosure material
None: Standard
T:
High Temperature (200°C for D3V-6/-01, 155°C for D3V-11)
W2: EN60695-2-11/-12 conformity with PTI=250
76
Miniature Basic Switch
D3V
• The Δ in the model number is for the mounting hole size.
None: 3.1 mm
K:
2.9 mm
• The ∇ in the model number is for the special code
None: Standard
H:
High Temperature (125°C)
E:
Special rating of 21A (8)A (for D3V-21 only)
6 A (OF: 50 gf)
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
[email protected]●-D-Ñ
SPST-NO
[email protected]●-D-Ñ
Pin plunger
---
SPDT
[email protected]●-D-Ñ
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Contact form
SPST-NC
[email protected]●-D-Ñ
SPST-NO
[email protected]●-D-Ñ
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
01 A (OF: 50 gf)
Actuator
Hinge position
(far from plunger)
Pin plunger
---
SPDT
[email protected]●-D-Ñ
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
Internal
External (M)
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
[email protected]●-D-Ñ
SPDT
[email protected]●-D-Ñ
Contact form
SPST-NC
[email protected]●-D-Ñ
SPST-NO
[email protected]●-D-Ñ
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
01 A (OF: 25 gf)
Actuator
Pin plunger
Hinge position
(far from plunger)
---
• The @ in the model number is for the terminal code.
A:
Solder/quick-connect terminals (#187)
C2:
Quick-connect terminals (#187)
C:
Quick-connect terminals (#250)
C6
RAST5 terminals (#250)
• The ● in the model number is for the enclosure material
None: Standard
T:
High Temperature (200°C for D3V-6/-01, 155°C for D3V-11)
W2: EN60695-2-11/-12 conformity with PTI=250
• The Δ in the model number is for the mounting hole size.
None: 3.1 mm
K:
2.9 mm
• The ∇ in the model number is for the special code
None: Standard
H:
High Temperature (125°C)
E:
Special rating of 21A (8)A (for D3V-21 only)
Miniature Basic Switch
D3V
77
Specifications
■ Ratings
Type
D3V-21
D3V-16
D3V-11
D3V-6
D3V-01
Rated voltage
250 VAC
8 VDC
30 VDC
125 VDC
250 VDC
250 VAC
8 VDC
30 VDC
125 VDC
250 VDC
250 VAC
8 VDC
30 VDC
125 VDC
250 VDC
250 VAC
8 VDC
30 VDC
125 VDC
250 VDC
125 VAC
8 VDC
30 VDC
Non-inductive load
Resistive load
Lamp load
NC
NO
NC
NO
21 A
3A
21 A
5A
14 A
5A
0.6 A
0.1 A
0.3 A
0.05 A
16 A
2A
16 A
4A
10 A
4A
0.6 A
0.1 A
0.3 A
0.05 A
11 A
1.5 A
11 A
3A
6A
3A
0.6 A
0.1 A
0.3 A
0.05 A
6A
3A
6A
3A
6A
3A
0.4 A
0.1 A
0.3 A
0.05 A
0.1 A
--0.1 A
--0.1 A
Inductive load
Inductive load
Motor load
NC
NO
NC
NO
12 A
4A
12 A
7A
12 A
5A
0.6 A
0.1 A
0.3 A
0.05 A
10 A
3A
10 A
6A
10 A
4A
0.6 A
0.1 A
0.3 A
0.05 A
6A
2A
6A
3A
6A
3A
0.6 A
0.1 A
0.3 A
0.05 A
4A
--4A
4A
--0.4 A
0.2 A
-------
---
Note: 1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal current
values of models with a contact gap of 0.5 mm (gap G).
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The ratings values apply under the following test conditions: Ambient temperature: 20±2°C, Ambient humidity: 65±5%, Operating frequency: 30 operations/min
■ Approved Standards
UL1054 (File No. E41515)
CSA C22.2 No.55 (File No. LR21642)
(Only standard ratings are listed.)
Rated voltage
125 VAC
250 VAC
125 VDC
250 VDC
D3V-21G
D3V-16
3/4 HP
16 A, 1/2 HP
20.1 A, 3/4 HP 16 A, 1/2 HP
--0.6 A
--0.3 A
D3V-16G
16 A, 1/2 HP
16 A, 1/2 HP
0.1 A
---
D3V-11
11 A, 1/2 HP
11 A, 1/2 HP
0.6 A
0.3 A
D3V-11G
11 A, 1/2 HP
11 A, 1/2 HP
0.1 A
---
D3V-6
6 A, 1/4 HP
6 A, 1/4 HP
-----
D3V-6G
6 A, 1/4 HP
6 A, 1/4 HP
-----
D3V-01
0.1 A
-------
EN 61058-1: 1992+A1: 1993 (License No. 119151L)
Rated voltage
125 VAC
250 VAC
250 VAC
D3V-21G
--20 (4) A
21 (8) A**
D3V-16
--16 (3) A
D3V-11
--11 (3) A
D3V-6
--6 (2) A
D3V-01
0.1 A
---
Testing conditions: 50,000 operations, T85 (0°C to 85°C) for D3V-21/D3V-01, T105 (0°C to 105°C) for D3V-16/D3V-11/D3V-6 and T200
(0 to 200°C) for D3V-6/-01 with suffix “T”, T155 (0 to 155°C) for D3V-11 with suffix “T”.
**Testing conditions: 10,000 operations, T85 (0°C to 85°C)
EN 60695-2-11 Ed.2, EN 60695-2-12 Ed.2 - - Glow-wire flammability test methods
Rated voltage
125 VAC
250 VAC
78
D3V-16
--16 (3) A
Miniature Basic Switch
D3V-11
--11 (3) A
D3V
D3V-6
--6 (2) A
D3V-01
0.1 A
---
■ Characteristics
Operating speed
Operating frequency
0.1 mm to 1 m/s (plunger models)
Mechanical: 600 operations/min
Electrical: 60 operations/min
100 MΩ min. (at 500 VDC)
D3V-21:
Insulation resistance
Contact resistance
Dielectric strength (see note 2)
Vibration resistance (see note 3)
Shock resistance (see note 3)
Life expectancy
30 mΩ max.
D3V-01, 50 gf versions:
50 mΩ max.
25 gf versions:
100 mΩ max.
1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity
2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between
each terminal and non-current-carrying metal parts
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 400 m/s2 (approx. 40G) max.
Malfunction: 100 m/s2 (approx. 10G) max.
Mechanical: 10,000,000 operations min.
Electrical: D3V-21:
Degree of protection
Degree of protection against electric shock
Proof tracking index (PTI)
Ambient operating temperature
50 mΩ max.
D3V-16, D3V-11, D3V-6:
50,000 operations min.
D3V-16:
100,000 operations min.
D3V-11:
200,000 operations min.
D3V-6, D3V-01:
500,000 operations min.
IEC IP40
Class I
250 (High Temperature type with suffix “-T”: 175)
D3V-21: -25°C to 85°C with no icing
D3V-16:
-25°C to 105°C (High Temperature type “H”: -25°C to 125°C) with no icing
D3V-11:
-25°C to 105°C (High Temperature types “H”: -25°C to 125°C, “T”: -25°C to 155°C) with no icing
D3V-6:
-25°C to 105°C (High Temperature types “H”: -25°C to 125°C, “T”: -25°C to 200°C) with no icing
D3V-01: -25°C to 85°C (High Temperature type “T”: -25°C to 200°C) with no icing
85% max. (for 5°C to 35°C)
Approx. 6.2 g (plunger models)
Ambient operating humidity
Weight
Note: 1. Data shown are of initial value.
2. The dielectric strength values shown in the table are for models with a Separator.
3. For plunger models, the above values apply for use at both the free position and total travel position. For lever models, they apply at the
total travel position.
4. For testing conditions, contact your OMRON sales representative.
■ Contact Specifications
Item
Contact
D3V-21
D3V-16
D3V-11
Specification
Material
Gap
(standard value)
Inrush current
NC
NO
0.5 mm
D3V-6
D3V-01
Rivet
Crossbar
Silver alloy
Gold alloy
1 mm (F gap type) or 0.5 mm (G gap type)
50 A max.
Minimum applicable load
40 A max.
24 A max.
1.0 mm
15 A max.
---
160 mA at 5 VDC
1 mA at 5 VDC
Note: Minimum applicable loads are indicated by N standard reference values. This value represents the failure rate at a 60% (λ60) reliability level
(JIS C5003). The equation λ60=0.5 x 10-6 / operations indicates that a failure rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
■ Contact Form
SPDT
SPST-NC
NC
SPST-NO
NC
NO
NO
COM
COM
COM
Miniature Basic Switch
D3V
79
Dimensions
■ Terminals
Note: Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
Terminal
type
Solder Terminal
(A)
Quick-connect Terminal
(#187) (C2)
Quick-connect Terminal
(#250) (C)
Quick-connect RAST5
Terminals (#250)(C6)
COM
16.8
(5.5)
(5.5)
(4.9)
(6.5)
(6.5)
(7.7)
2.9
3.2
2.9
t = 0.5 (10)
Three, solder terminals
Terminal
dimensions
t=0.8
Three quick connect
terminals (#250)
(12.0)
t = 0.8 Three, quick-connect
terminals (#250)
8
6.35
3.2
4.75±0.1
5 15.2
12.8
t = 0.5 (10)
Three, quick-connect
terminals (#187)
6.35
3.2 (see note)
(3.5)
4.5
3.95
4.75±0.1
6.35±0.1
6.3±0.1
1.6-dia. terminal hole
2.4 dia. 1.6 dia.
Note: Indicates the length to the
center of the 1.6-dia. holes
1.75-dia. terminal hole
1.65-dia. terminal hole
Note: The table above is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications. For
terminal positions, refer to the above Contact Form.
■ Mounting Holes
Two, 3.1-dia. mounting holes or
M3 screw holes
All switches may be panel mounted using M3 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.39 to 0.59 N·m.
10.3±0.1
22.2±0.1
■ Dimensions and Operating Characteristics
➡
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models also incorporate terminals A, C, and
C6, which are omitted from the following drawings. Refer to Terminals section for the dimensions of these terminals.
3. The @ in the model number is for the terminal code.
4. The Δ in the model number is for combinations of the enclosure material, the mounting hole size and the special code as indicated in the Model
Number Legend and Available Combinations tables. The hole size in the following illustrations of models with a suffix “K” in the Δ is 2.9 mm.
5. The operating characteristics are for operation in the A direction (
).
Plunger Models
A
Model
OF max.
RF min.
PT max.
OT min.
MD max.
OP
80
➡
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
t=0.5
Three, quick-connect
terminals (#187)
[email protected]Δ
125 gf
20 gf
1.2 mm
1.0 mm
0.3 mm
[email protected]Δ
[email protected]Δ
200 gf
50 gf
Miniature Basic Switch
[email protected]Δ
[email protected]Δ
[email protected]Δ
100 gf
50 gf
15 gf
5 gf
1.2 mm
1.0 mm
0.4 mm (F gap type) or 0.3 mm (G gap type)
14.7±0.4 mm
D3V
[email protected]Δ
[email protected]Δ
50 gf
5 gf
25 gf
3 gf
1.2 mm
1.0 mm
0.4 mm
Short Hinge Lever Models
22.1
3.1+0.13
−0.03 dia. hole 1.6
t=0.5
8.1
0.7
2.85
4.2
PT
2.8
4
18.7
A
➡
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
OP
10.3±0.1
15.9 7.2
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
2.8
(10)
t=0.5
Three, #187 series tab
3.1+0.13
−0.03
10.3
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
A
➡
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever
D3V-21G1(M)[email protected]Δ
D3V-161(M)[email protected]Δ
D3V-111(M)[email protected]Δ
D3V-111(M)[email protected]Δ
D3V-61(M)[email protected]Δ
OF max.
RF min.
125 gf
20 gf
200 gf
50 gf
100 gf
15 gf
PT max.
OT min.
MD max.
1.6 mm
0.8 mm
0.5 mm
Model
D3V-011(M)[email protected]Δ
50 gf
5 gf
1.6 mm
0.8 mm
0.6 mm (F gap type) or 0.5 mm (G gap type)
1.6 mm
0.8 mm
0.6 mm
15.2 ± 0.5 mm
OP
3.1+0.13
−0.03 dia. hole
27.9±0.8
14.3
t=0.5
8.5
A
PT
2.85
4.5
0.7
2.8
4
18.7
10.3±0.1
15.9 7.2
OP
+0.13
t=0.5
Three, #187 series tab
2.8
(10)
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
OF max.
RF min.
85 gf
8 gf
130 gf
16 gf
65 gf
8 gf
PT max.
OT min.
MD max.
3.5 mm
1.1 mm
1.1 mm
Model
1.6
➡
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
OP
D3V-6G1(M)[email protected]Δ
3.4±0.15 dia. hole
22.2±0.1
3.1−0.03
10.3
27.8
37.8±0.8
[email protected]Δ
[email protected]Δ
35 gf
4 gf
3.5 mm
1.1 mm
1.2 mm (F gap type) or 1.1 mm (G gap type)
3.5 mm
1.1 mm
1.2 mm
15.2 ± 1.2 mm
Miniature Basic Switch
D3V
81
Hinge Lever Models
A
➡
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
35.6±0.8
3.1+0.13
−0.03 dia. hole 1.6
t=0.5
0.7
2.85 4.2
2.8
4
18.8
PT
8.1
OP
10.3±0.1
15.9 7.2
2.8
(10)
t=0.5
Three, #187 series tab
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
3.1+0.13
−0.03
10.3
A
➡
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever
D3V-21G2(M)[email protected]Δ
D3V-162(M)[email protected]Δ
D3V-112(M)[email protected]Δ
OF max.
RF min.
80 gf
6 gf
125 gf
14 gf
PT max.
OT min.
MD max.
4.0 mm
1.6 mm
0.8 mm
Model
D3V-112(M)[email protected]Δ
D3V-62(M)[email protected]−Δ
D3V-012(M)[email protected]Δ
60 gf
6 gf
30 gf
---
4.0 mm
1.6 mm
1.5 mm (F gap type) or 0.8 mm (G gap type)
4.0 mm
1.6 mm
1.5 mm
15.2 ± 1.2 mm
OP
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
A
1.6
0.7
18.7
2.8
(10)
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
OF max.
RF min.
45 gf
4 gf
70 gf
8 gf
35 gf
4 gf
PT max.
OT min.
MD max.
6.0 mm
2.5 mm
1.3 mm
15.2 ± 2.0 mm
Miniature Basic Switch
3.4±0.15 dia. hole
22.2±0.1
D3V
PT
2.85
4.5
3.1+0.13
−0.03
10.3
27.8
37.8±0.8
[email protected]Δ
6.0 mm
2.5 mm
2.0 mm (F gap type) or 1.3 mm (G gap type)
OP
t=0.5
2.8
10.3±0.1 OP
4
15.9 7.2
[email protected]Δ
Model
41.4±0.8
14.3
8.5
➡
3.1 +0.13
−0.03 dia. hole
t=0.5
Three, #187 series tab
82
D3V-6G2(M)[email protected]Δ
[email protected]Δ
20 gf
--6.0 mm
2.5 mm
2.0 mm
Long Hinge Lever Models
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
A
➡
3.1+0.13
−0.03 dia. hole
59.4±0.8
1.6
8.1
0.7
2.85 4.2
PT
t=0.5
2.8
4
15.9 7.2
18.7
10.3±0.1
OP
+0.13
3.1−0.03
3.4±0.15 dia. hole
22.2±0.1
27.8
2.8
(10)
t=0.5
Three, #187 series tab
10.3
37.8±0.8
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
A
➡
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever
D3V-21G3(M)[email protected]
D3V-163(M)[email protected]
D3V-113(M)[email protected]
OF max.
RF min.
45 gf
3 gf
70 gf
6 gf
PT max.
OT min.
MD max.
9.0 mm
2.0 mm
2.0 mm
Model
D3V-113(M)[email protected]
D3V-6G3(M)[email protected] D3V-013(M)[email protected]
D3V-63(M)[email protected]
35 gf
---
20 gf
---
15.2 ± 2.6 mm
+2.6
15.2 −3.2 mm
OP
9.0 mm
3.2 mm
2.8 mm
9.0 mm
9.0 mm
2.0 mm
3.2 mm
2.8 mm (F gap type) or 2.0 mm (G gap type) 2.8 mm (F gap type) or 2.0 mm (G gap type)
A
3.1+0.13
−0.03 dia. hole 1.6
65.2±0.8
14.3
t=0.5
8.5
➡
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
2.85 4.5
PT
0.7
2.8
OP
10.3±0.1
4
15.9 7.2
18.7
2.8
t=0.5
Three, #187 series tab
3.4±0.15 dia. hole
22.2±0.1
(10)
3.1+0.13
−0.03
10.3
27.8
37.8±0.8
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
OF max.
RF min.
20 gf
---
35 gf
4 gf
20 gf
---
PT max.
OT min.
MD max.
15.0 mm
4.0 mm
3.0 mm
Model
OP
[email protected]
[email protected]
10 gf
---
15.0 mm
4.0 mm
3.8 mm (F gap type) or 3.0 mm (G gap type)
15.0 mm
4.0 mm
3.8 mm
15.2 ± 3.0 mm
Miniature Basic Switch
D3V
83
Simulated Roller Lever Models
A
32.5±0.8
+0.13
3.1−0.03 dia. hole
1.6
➡
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
8.1
0.7
2.8
4
18.8
2.85 4.2
PT
t=0.5
10.3±0.1
15.9 7.2
2.8
(10)
t=0.5
Three, #187 series tab
3.4±0.15 dia. hole
OP
3.1+0.13
−0.03
10.3
22.2±0.1
27.8
37.8±0.8
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
➡
A
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever
D3V-21G4(M)[email protected]Δ
D3V-164(M)[email protected]Δ
D3V-114(M)[email protected]Δ
D3V-114(M)[email protected]Δ
D3V-64(M)[email protected]Δ
OF max.
RF min.
85 gf
7 gf
125 gf
14 gf
60 gf
6 gf
PT max.
OT min.
MD max.
4.0 mm
1.6 mm
1.4 mm
Model
D3V-6G4(M)[email protected]Δ
30 gf
---
4.0 mm
1.6 mm
1.5 mm (F gap type) or 0.8 mm (G gap type)
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
A
38.4±0.8
1.6
0.7
14.3
8.5
18.7
2.8
7.2
2.8
(10)
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
[email protected]
[email protected]
[email protected]
[email protected]
OF max.
RF min.
55 gf
3 gf
75 gf
10 gf
40 gf
3 gf
PT max.
OT min.
MD max.
8.0 mm
1.5 mm
3.0 mm
8.0 mm
1.5 mm
3.5 mm (F gap type) or 3.0 mm (G gap type)
18.7 ± 1.2 mm
Miniature Basic Switch
D3V
OP
10.3±0.1
[email protected]
OP
2.85 4.5
PT
t=0.5
4
15.9
➡
+0.13
3.1−0.03 dia. hole
t=0.5
Three, #187 series tab
84
4.0 mm
1.6 mm
1.5 mm
18.7 ± 1.2 mm
OP
Model
D3V-014(M)[email protected]Δ
+0.13
3.1−0.03
10.3
[email protected]
[email protected]
20 gf
--8.0 mm
1.5 mm
3.5 mm
Short Hinge Roller Lever Models
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
A
8.1
0.7
➡
20.1±0.8
+0.13
3.1−0.03 dia. hole 1.6
4.8
2.8
OP
10.3±0.1
4
15.9 7.2
18.8
3.1+0.13
−0.03
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
2.8
(10)
t=0.5
Three, #187 series tab
10.3
A
➡
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
t=0.5
Three, quick-connect
terminals (#187)
D3V-21G5(M)[email protected]Δ
D3V-165(M)[email protected]Δ
D3V-115(M)[email protected]Δ
D3V-115(M)[email protected]Δ
D3V-65(M)[email protected]Δ
OF max.
RF min.
145 gf
20 gf
240 gf
50 gf
120 gf
15 gf
PT max.
OT min.
MD max.
1.6 mm
0.8 mm
0.5 mm
Model
5.1
PT
t=0.5
Note: 1. Stainless-steel lever
2. Oilless polyacetar resin roller
D3V-6G5(M)[email protected]Δ
D3V-015(M)[email protected]Δ
60 gf
6 gf
1.6 mm
0.8 mm
0.6 mm (F gap type) or 0.5 mm (G gap type)
OP
1.6 mm
0.8 mm
0.6 mm
20.7±0.6 mm
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
A
dia. hole 1.6
25.9±0.8
14.3
t=0.5
8.5
➡
+0.13
3.1−0.03
PT
5.1
0.7
2.8 OP
4
18.8
10.3±0.1
15.9 7.2
+0.13
t=0.5
Three, #187 series tab
2.8
(10)
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
OF max.
RF min.
100 gf
8 gf
160 gf
15 gf
80 gf
8 gf
PT max.
OT min.
MD max.
2.6 mm
1.0 mm
8.0 mm
Model
OP
3.1−0.03
10.3
[email protected]
[email protected]
40 gf
4 gf
2.6 mm
1.0 mm
0.9 mm (F gap type) or 0.8 mm (G gap type)
2.6 mm
1.0 mm
0.9 mm
20.7 ± 1.0 mm
Miniature Basic Switch
D3V
85
Hinge Roller Lever Models
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
➡
A
33.0±0.8
+0.13
3.1−0.03 dia. hole
1.6
5.1
PT
4.8
t=0.5
8.1
0.7
2.8
OP
10.3±0.1
4
15.9 7.2
18.7
+0.13
2.8
(10)
t=0.5
Three, #187 series tab
3.1−0.03
3.4±0.15 dia. hole
10.3
22.2±0.1
27.8
37.8±0.8
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
➡
A
t=0.5
Three, quick-connect
terminals (#187)
D3V-21G6(M)[email protected]Δ
D3V-166(M)[email protected]Δ
D3V-116(M)[email protected]Δ
D3V-116(M)[email protected]Δ
D3V-66(M)[email protected]Δ
OF max.
RF min.
80 gf
5 gf
125 gf
14 gf
60 gf
6 gf
PT max.
OT min.
MD max.
4.0 mm
1.6 mm
0.8 mm
Model
Note: 1. Stainless-steel lever
2. Oilless polyacetar resin roller
D3V-6G6(M)[email protected]Δ
D3V-016(M)[email protected]Δ
30 gf
---
4.0 mm
1.6 mm
1.5 mm (F gap type) or 0.8 mm (G gap type)
OP
4.0 mm
1.6 mm
1.5 mm
20.7±1.2 mm
+0.13
3.1−0.03 dia. hole
1.6
➡
A
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
[email protected]Δ
39.8±0.8
14.3
8.5
PT
5.1
t=0.5
0.7
2.8
4
10.3±0.1
15.9 7.2
18.8
OP
+0.13
t=0.5
Three, #187 series tab
2.8
(10)
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
OF max.
RF min.
50 gf
3 gf
75 gf
10 gf
40 gf
3 gf
PT max.
OT min.
MD max.
7.2 mm
2.0 mm
2.0 mm
Model
7.2 mm
2.0 mm
2.7 mm (F gap type) or 2.0 mm (G gap type)
20.7 ± 2.2 mm
OP
86
Miniature Basic Switch
D3V
3.1−0.03
10.3
[email protected]
[email protected]
20 gf
--7.2 mm
2.0 mm
2.7 mm
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
■ Cautions
Mounting Direction
Handling
Mount lever-operated switches with a maximum operating force of
0.49 N in a direction where the actuator weight will not be applied to
the switch. Since the switch is designed for a small load, its resetting
force is small. Therefore, resetting failure may occur if unnecessary
load is applied to the switch.
Be careful not to drop the switch. Doing so may cause damage to the
switch’s internal components because it is designed for a small load.
Insulation Distance
According to EN61058-1, the minimum insulation thickness for this
switch should be 1.1 mm and minimum clearance distance between
the terminal and mounting plate should be 1.9 mm. If the insulation
distance cannot be provided in the product incorporating the switch,
either use a switch with insulation barrier or use a Separator to
ensure sufficient insulation distance.
Using Microloads
Voltage (V)
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for
microloads and that operate in the following range;
Operating range
for micro load
models D3V-01
Operating
range for
generalload models
Inoperable
range
Current (mA)
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, then contact wear may
increase and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
Solder Terminal Approval Conditions
Use of soldering iron for normal soldering is acceptable.
Soldering hook holes version available.
Soldering terminal types 1 and 2 are met.
Miniature Basic Switch
D3V
87
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
Global - http://www.omron.com
USA - http://www.components.omron.com
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
Cat. No. X303-E-1
11/10
Miniature Basic Switch
Specifications subject to change without notice
D3V
Printed in USA