SAMSUNG CL10F474ZB8NNNC

SPECIFICATION
 Samsung P/N : CL10F474ZB8NNNC
 Descriptiont : CAP, 470㎋, -20/+80%, 50V,Y5V,0603
 Supplier : Samsung electro-mechanics
 Product : Multi-layer Ceramic Capacitor
A. Samsung Part Number
CL
10
F
474
Z
B
8
N
N
N
C
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
① Series
② Size
Samsung Multi-layer Ceramic Capacitor
0603 (inch code)
L: 1.6 ± 0.1
③ Dielectric
④ Capacitance
⑤ Capacitance
tolerance
⑥ Rated Voltage
⑦ Thickness
Y5V
470 ㎋
-20/+80 %
50 V
0.8 ± 0.1
mm
⑧ Inner electrode
Termination
Plating
⑨ Product
⑩ Special
⑪ Packaging
mm
W:
0.8 ± 0.1 mm
Ni
Cu
Sn 100%
(Pb Free)
Normal
Reserved for future use
Cardboard Type, 7"reel(4,000ea)
B. Samsung Reliability Test and Judgement condition
Performance
Capacitance
Tan δ (DF)
Insulation
Resistance
Appearance
Withstanding
Voltage
Temperature
Characteristics
Adhesive Strength
of Termination
Bending Strength
Solderability
Test condition
Within specified tolerance
0.07 max.
1㎑±10%
1.0±0.2Vrms
More than 100Mohm㎌
Rated Voltage
60~120 sec.
No abnormal exterior appearance
No dielectric breakdown or
mechanical breakdown
Y5V
Visual inspection
250% of the rated voltage
(From -30℃ to 85℃, Capacitance change should be within -82~+22%)
No peeling shall be occur on the
500gF, for 10±1 sec.
terminal electrode
Capacitance change : within ±30%
Bending to the limit (1mm)
with 1.0mm/sec.
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Soldering heat
Capacitance change :
Tan δ, IR : initial spec.
within ±20%
Solder pot : 270±5℃, 10±1sec.
Performance
Vibration Test
Capacitance change :
Tan δ, IR : initial spec.
within ±20%
Moisture
Resistance
Capacitance change : within ±30%
Tan δ : 0.09 max
IR
: More than 25㏁·㎌
High Temperature
Resistance
Capacitance change : within ±30%
Tan δ : 0.09 max
IR
: More than 50㏁·㎌
Temperature
Cycling
Capacitance change :
Tan δ, IR : initial spec.
within ±20%
Test condition
Amplitude : 1.5mm
From 10㎐ to 55㎐ (return : 1min.)
2hours  3 direction (x, y, z)
With rated voltage
40±2℃, 90~95%RH, 500 +12/-0 hour
With 200% of the rated voltage
Max. operating temperature
1000+48/-0 hour
1 cycle condition
Min. operating temperature
→
→ Max. operating temperature →
5 cycles test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )
* For the more detail Specification, Please refer to the Samsung MLCC catalogue.
25℃
25℃