TI PCI6611

Data Manual
June 2004
Connectivity Solutions
SCPS082
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2004, Texas Instruments Incorporated
Contents
Section
1
2
3
Title
Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−1
1.1
Controller Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−1
1.1.1
PCI6621 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−1
1.1.2
PCI6421 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−1
1.1.3
PCI6611 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−2
1.1.4
PCI6411 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−2
1.1.5
Multifunctional Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−3
1.1.6
PCI Bus Power Management . . . . . . . . . . . . . . . . . . . . . . . . . 1−3
1.1.7
Power Switch Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−3
1.2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−3
1.3
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−4
1.4
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−5
1.5
Terms and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−5
1.6
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−5
Terminal Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−1
2.1
Detailed Terminal Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−13
Feature/Protocol Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−1
3.1
Power Supply Sequencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−1
3.2
I/O Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−2
3.3
Clamping Voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−2
3.4
Peripheral Component Interconnect (PCI) Interface . . . . . . . . . . . . . . 3−2
3.4.1
Device Resets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−2
3.4.2
Serial EEPROM I2C Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−2
3.4.3
Functions 0 and 1 (CardBus) Subsystem Identification . . . 3−3
3.4.4
Function 3 (Flash Media) Subsystem Identification . . . . . . 3−4
3.4.5
Function 4 SD Host Subsystem Identification . . . . . . . . . . . 3−4
3.4.6
Function 5 Smart Card Subsystem Identification . . . . . . . . 3−4
3.5
PC Card Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−4
3.5.1
PC Card Insertion/Removal and Recognition . . . . . . . . . . . 3−4
3.5.2
Low Voltage CardBus Card Detection . . . . . . . . . . . . . . . . . 3−5
3.5.3
UltraMedia Card Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−5
3.5.4
Flash Media Card Detection . . . . . . . . . . . . . . . . . . . . . . . . . . 3−6
3.5.5
Power Switch Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−6
3.5.6
Internal Ring Oscillator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−7
3.5.7
Integrated Pullup Resistors for PC Card Interface . . . . . . . 3−7
3.5.8
SPKROUT and CAUDPWM Usage . . . . . . . . . . . . . . . . . . . 3−7
3.5.9
LED Socket Activity Indicators . . . . . . . . . . . . . . . . . . . . . . . . 3−8
iii
Section
4
iv
Title
3.5.10
CardBus Socket Registers . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.11
48-MHz Clock Requirements . . . . . . . . . . . . . . . . . . . . . . . . .
3.6
Serial EEPROM Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6.1
Serial-Bus Interface Implementation . . . . . . . . . . . . . . . . . . .
3.6.2
Accessing Serial-Bus Devices Through Software . . . . . . .
3.6.3
Serial-Bus Interface Protocol . . . . . . . . . . . . . . . . . . . . . . . . .
3.6.4
Serial-Bus EEPROM Application . . . . . . . . . . . . . . . . . . . . . .
3.7
Programmable Interrupt Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.1
PC Card Functional and Card Status Change Interrupts .
3.7.2
Interrupt Masks and Flags . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.3
Using Parallel IRQ Interrupts . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.4
Using Parallel PCI Interrupts . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.5
Using Serialized IRQSER Interrupts . . . . . . . . . . . . . . . . . . .
3.7.6
SMI Support in the PCI6x21/PCI6x11 Controller . . . . . . . .
3.8
Power Management Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.1
Integrated Low-Dropout Voltage Regulator (LDO-VR) . . . .
3.8.2
CardBus (Functions 0 and 1) Clock Run Protocol . . . . . . .
3.8.3
CardBus PC Card Power Management . . . . . . . . . . . . . . . .
3.8.4
16-Bit PC Card Power Management . . . . . . . . . . . . . . . . . . .
3.8.5
Suspend Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.6
Requirements for Suspend Mode . . . . . . . . . . . . . . . . . . . . .
3.8.7
Ring Indicate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.8
PCI Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.8.1
CardBus Power Management
(Functions 0 and 1) . . . . . . . . . . . . . . . . . . . . . .
3.8.8.2
Flash Media (Function 3)
Power Management . . . . . . . . . . . . . . . . . . . . . .
3.8.8.3
SD Host (Function 4)
Power Management . . . . . . . . . . . . . . . . . . . . . .
3.8.8.4
Smart Card (Function 5)
Power Management . . . . . . . . . . . . . . . . . . . . . .
3.8.9
CardBus Bridge Power Management . . . . . . . . . . . . . . . . . .
3.8.10
ACPI Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.11
Master List of PME Context Bits and Global Reset-Only
Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC Card Controller Programming Model . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1
PCI Configuration Register Map (Functions 0 and 1) . . . . . . . . . . . . .
4.2
Vendor ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3
Device ID Register Functions 0 and 1 . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4
Command Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.5
Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.6
Revision ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.7
Class Code Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
3−8
3−9
3−9
3−9
3−9
3−10
3−12
3−15
3−15
3−17
3−17
3−18
3−18
3−18
3−19
3−20
3−20
3−21
3−21
3−21
3−22
3−22
3−23
3−23
3−24
3−24
3−24
3−25
3−25
3−26
4−1
4−1
4−2
4−3
4−4
4−5
4−6
4−6
Section
4.8
4.9
4.10
4.11
4.12
4.13
4.14
4.15
4.16
4.17
4.18
4.19
4.20
4.21
4.22
4.23
4.24
4.25
4.26
4.27
4.28
4.29
4.30
4.31
4.32
4.33
4.34
4.35
4.36
4.37
4.38
4.39
4.40
4.41
4.42
4.43
4.44
4.45
4.46
4.47
4.48
Title
Cache Line Size Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Latency Timer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Header Type Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BIST Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus Socket Registers/ExCA Base Address Register . . . . . . . . .
Capability Pointer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Secondary Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PCI Bus Number Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus Bus Number Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Subordinate Bus Number Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus Latency Timer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus Memory Base Registers 0, 1 . . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus Memory Limit Registers 0, 1 . . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus I/O Base Registers 0, 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus I/O Limit Registers 0, 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interrupt Line Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interrupt Pin Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bridge Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Subsystem Vendor ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Subsystem ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC Card 16-Bit I/F Legacy-Mode Base-Address Register . . . . . . . . .
System Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MC_CD Debounce Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General-Purpose Event Status Register . . . . . . . . . . . . . . . . . . . . . . . .
General-Purpose Event Enable Register . . . . . . . . . . . . . . . . . . . . . . .
General-Purpose Input Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General-Purpose Output Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multifunction Routing Status Register . . . . . . . . . . . . . . . . . . . . . . . . . .
Retry Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Card Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Device Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostic Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Capability ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Next Item Pointer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Management Capabilities Register . . . . . . . . . . . . . . . . . . . . . .
Power Management Control/Status Register . . . . . . . . . . . . . . . . . . . .
Power Management Control/Status Bridge Support Extensions
Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power-Management Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial Bus Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial Bus Index Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
4−6
4−7
4−7
4−7
4−8
4−8
4−9
4−10
4−10
4−10
4−11
4−11
4−12
4−12
4−13
4−13
4−14
4−15
4−16
4−16
4−17
4−18
4−20
4−21
4−22
4−23
4−23
4−24
4−25
4−26
4−27
4−28
4−29
4−30
4−30
4−31
4−32
4−33
4−33
4−34
4−34
v
Section
5
6
7
vi
Title
4.49 Serial Bus Slave Address Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.50 Serial Bus Control/Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ExCA Compatibility Registers (Functions 0 and 1) . . . . . . . . . . . . . . . . . .
5.1
ExCA Identification and Revision Register . . . . . . . . . . . . . . . . . . . . . .
5.2
ExCA Interface Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3
ExCA Power Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.4
ExCA Interrupt and General Control Register . . . . . . . . . . . . . . . . . . .
5.5
ExCA Card Status-Change Register . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.6
ExCA Card Status-Change Interrupt Configuration Register . . . . . . .
5.7
ExCA Address Window Enable Register . . . . . . . . . . . . . . . . . . . . . . . .
5.8
ExCA I/O Window Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.9
ExCA I/O Windows 0 and 1 Start-Address Low-Byte Registers . . . .
5.10 ExCA I/O Windows 0 and 1 Start-Address High-Byte Registers . . . .
5.11 ExCA I/O Windows 0 and 1 End-Address Low-Byte Registers . . . . .
5.12 ExCA I/O Windows 0 and 1 End-Address High-Byte Registers . . . .
5.13 ExCA Memory Windows 0−4 Start-Address Low-Byte Registers . . .
5.14 ExCA Memory Windows 0−4 Start-Address High-Byte Registers . . .
5.15 ExCA Memory Windows 0−4 End-Address Low-Byte Registers . . . .
5.16 ExCA Memory Windows 0−4 End-Address High-Byte Registers . . .
5.17 ExCA Memory Windows 0−4 Offset-Address Low-Byte Registers . .
5.18 ExCA Memory Windows 0−4 Offset-Address High-Byte Registers .
5.19 ExCA Card Detect and General Control Register . . . . . . . . . . . . . . . .
5.20 ExCA Global Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.21 ExCA I/O Windows 0 and 1 Offset-Address Low-Byte Registers . . .
5.22 ExCA I/O Windows 0 and 1 Offset-Address High-Byte Registers . . .
5.23 ExCA Memory Windows 0−4 Page Registers . . . . . . . . . . . . . . . . . . .
CardBus Socket Registers (Functions 0 and 1) . . . . . . . . . . . . . . . . . . . . . .
6.1
Socket Event Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2
Socket Mask Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3
Socket Present State Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4
Socket Force Event Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5
Socket Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.6
Socket Power Management Register . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flash Media Controller Programming Model . . . . . . . . . . . . . . . . . . . . . . . .
7.1
Vendor ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2
Device ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3
Command Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.4
Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.5
Class Code and Revision ID Register . . . . . . . . . . . . . . . . . . . . . . . . . .
7.6
Latency Timer and Class Cache Line Size Register . . . . . . . . . . . . . .
7.7
Header Type and BIST Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.8
Flash Media Base Address Register . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
4−35
4−36
5−1
5−5
5−6
5−7
5−8
5−9
5−10
5−11
5−12
5−13
5−13
5−14
5−14
5−15
5−16
5−17
5−18
5−19
5−20
5−21
5−22
5−23
5−23
5−24
6−1
6−2
6−3
6−4
6−5
6−7
6−8
7−1
7−2
7−2
7−3
7−4
7−5
7−5
7−6
7−6
Section
8
Title
7.9
Subsystem Vendor Identification Register . . . . . . . . . . . . . . . . . . . . . . .
7.10 Subsystem Identification Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.11 Capabilities Pointer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.12 Interrupt Line Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.13 Interrupt Pin Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.14 Minimum Grant Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.15 Maximum Latency Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.16 Capability ID and Next Item Pointer Registers . . . . . . . . . . . . . . . . . . .
7.17 Power Management Capabilities Register . . . . . . . . . . . . . . . . . . . . . .
7.18 Power Management Control and Status Register . . . . . . . . . . . . . . . .
7.19 Power Management Bridge Support Extension Register . . . . . . . . . .
7.20 Power Management Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.21 General Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.22 Subsystem Access Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.23 Diagnostic Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SD Host Controller Programming Model . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.1
Vendor ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2
Device ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3
Command Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.4
Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.5
Class Code and Revision ID Register . . . . . . . . . . . . . . . . . . . . . . . . . .
8.6
Latency Timer and Class Cache Line Size Register . . . . . . . . . . . . . .
8.7
Header Type and BIST Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.8
SD Host Base Address Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.9
Subsystem Vendor Identification Register . . . . . . . . . . . . . . . . . . . . . . .
8.10 Subsystem Identification Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.11 Capabilities Pointer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.12 Interrupt Line Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.13 Interrupt Pin Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.14 Minimum Grant Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.15 Maximum Latency Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.16 Slot Information Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.17 Capability ID and Next Item Pointer Registers . . . . . . . . . . . . . . . . . . .
8.18 Power Management Capabilities Register . . . . . . . . . . . . . . . . . . . . . .
8.19 Power Management Control and Status Register . . . . . . . . . . . . . . . .
8.20 Power Management Bridge Support Extension Register . . . . . . . . . .
8.21 Power Management Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.22 General Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.23 Subsystem Access Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.24 Diagnostic Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.25 Slot 0 3.3-V Maximum Current Register . . . . . . . . . . . . . . . . . . . . . . . .
8.26 Slot 1 3.3-V Maximum Current Register . . . . . . . . . . . . . . . . . . . . . . . .
Page
7−7
7−7
7−7
7−8
7−8
7−9
7−9
7−10
7−11
7−12
7−12
7−13
7−13
7−14
7−15
8−1
8−2
8−2
8−3
8−4
8−5
8−6
8−6
8−7
8−7
8−8
8−8
8−8
8−9
8−9
8−10
8−10
8−11
8−12
8−13
8−13
8−14
8−14
8−15
8−15
8−16
8−16
vii
Section
Title
Page
8.27 Slot 2 3.3-V Maximum Current Register . . . . . . . . . . . . . . . . . . . . . . . . 8−16
8.28 Slot 3 3.3-V Maximum Current Register . . . . . . . . . . . . . . . . . . . . . . . . 8−17
8.29 Slot 4 3.3-V Maximum Current Register . . . . . . . . . . . . . . . . . . . . . . . . 8−17
8.30 Slot 5 3.3-V Maximum Current Register . . . . . . . . . . . . . . . . . . . . . . . . 8−17
9 Smart Card Controller Programming Model . . . . . . . . . . . . . . . . . . . . . . . . . 9−1
9.1
Vendor ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−2
9.2
Device ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−2
9.3
Command Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−3
9.4
Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−4
9.5
Class Code and Revision ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . 9−5
9.6
Latency Timer and Class Cache Line Size Register . . . . . . . . . . . . . . 9−5
9.7
Header Type and BIST Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−6
9.8
Smart Card Base Address Register 0 . . . . . . . . . . . . . . . . . . . . . . . . . . 9−6
9.9
Smart Card Base Address Register 1−4 . . . . . . . . . . . . . . . . . . . . . . . . 9−7
9.10 Subsystem Vendor Identification Register . . . . . . . . . . . . . . . . . . . . . . . 9−7
9.11 Subsystem Identification Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−8
9.12 Capabilities Pointer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−8
9.13 Interrupt Line Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−8
9.14 Interrupt Pin Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−9
9.15 Minimum Grant Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−9
9.16 Maximum Latency Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−10
9.17 Capability ID and Next Item Pointer Registers . . . . . . . . . . . . . . . . . . . 9−10
9.18 Power Management Capabilities Register . . . . . . . . . . . . . . . . . . . . . . 9−11
9.19 Power Management Control and Status Register . . . . . . . . . . . . . . . . 9−12
9.20 Power Management Bridge Support Extension Register . . . . . . . . . . 9−12
9.21 Power Management Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−13
9.22 General Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−13
9.23 Subsystem ID Alias Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−14
9.24 Class Code Alias Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−14
9.25 Smart Card Configuration 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−15
9.26 Smart Card Configuration 2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . 9−17
10 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10−1
10.1 Absolute Maximum Ratings Over Operating Temperature Ranges . 10−1
10.2 Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . 10−1
10.3 Electrical Characteristics Over Recommended Operating
Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10−3
10.4 Electrical Characteristics Over Recommended Ranges of Operating
Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10−3
10.4.1
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10−3
10.4.2
Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10−4
10.4.3
Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10−4
10.5 PCI Clock/Reset Timing Requirements Over Recommended Ranges
of Supply Voltage and Operating Free-Air Temperature . . . . . . . . . . . 10−4
viii
Section
10.6
10.7
10.8
Title
Switching Characteristics for PHY Port Interface . . . . . . . . . . . . . . . . .
Operating, Timing, and Switching Characteristics of XI . . . . . . . . . . .
PCI Timing Requirements Over Recommended Ranges of
Supply Voltage and Operating Free-Air Temperature . . . . . . . . . . . . .
11 Mechanical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
10−5
10−5
10−5
11−1
ix
List of Illustrations
Figure
2−1
2−2
2−3
2−4
3−1
3−2
3−3
3−4
3−5
3−6
3−7
3−8
3−9
3−10
3−11
3−12
3−13
3−14
3−15
5−1
5−2
6−1
10−1
x
Title
PCI6621 GHK/ZHK-Package Terminal Diagram . . . . . . . . . . . . . . . . . . . . .
PCI6421 GHK/ZHK-Package Terminal Diagram . . . . . . . . . . . . . . . . . . . . .
PCI6611 GHK/ZHK-Package Terminal Diagram . . . . . . . . . . . . . . . . . . . . .
PCI6411 GHK/ZHK-Package Terminal Diagram . . . . . . . . . . . . . . . . . . . . .
PCI6x21/PCI6x11 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . .
3-State Bidirectional Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial ROM Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPKROUT Connection to Speaker Driver . . . . . . . . . . . . . . . . . . . . . . . . . .
Two Sample LED Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial-Bus Start/Stop Conditions and Bit Transfers . . . . . . . . . . . . . . . . . .
Serial-Bus Protocol Acknowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial-Bus Protocol—Byte Write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial-Bus Protocol—Byte Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EEPROM Interface Doubleword Data Collection . . . . . . . . . . . . . . . . . . . .
IRQ Implementation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Diagram Implementing CardBus Device Class Power
Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signal Diagram of Suspend Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RI_OUT Functional Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Block Diagram of a Status/Enable Cell . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ExCA Register Access Through I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ExCA Register Access Through Memory . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing CardBus Socket Registers Through PCI Memory . . . . . . . . . .
Test Load Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
2−1
2−2
2−3
2−4
3−1
3−2
3−3
3−8
3−8
3−10
3−10
3−11
3−11
3−12
3−18
3−20
3−22
3−23
3−25
5−2
5−2
6−1
10−4
List of Tables
Table
1−1
2−1
2−2
2−3
2−4
2−5
2−6
2−7
2−8
2−9
2−10
2−11
2−12
2−13
2−14
2−15
2−16
2−17
2−18
2−19
3−1
3−2
3−3
3−4
3−5
3−6
3−7
3−8
3−9
3−10
3−11
3−12
3−13
3−14
3−15
3−16
3−17
Title
Terms and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signal Names by GHK Terminal Number . . . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus PC Card Signal Names Sorted Alphabetically . . . . . . . . . . . . . .
16-Bit PC Card Signal Names Sorted Alphabetically . . . . . . . . . . . . . . . . .
Power Supply Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC Card Power Switch Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PCI System Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PCI Address and Data Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PCI Interface Control Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multifunction and Miscellaneous Terminals . . . . . . . . . . . . . . . . . . . . . . . . .
16-Bit PC Card Address and Data Terminals . . . . . . . . . . . . . . . . . . . . . . .
16-Bit PC Card Interface Control Terminals . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus PC Card Interface System Terminals . . . . . . . . . . . . . . . . . . . . . .
CardBus PC Card Address and Data Terminals . . . . . . . . . . . . . . . . . . . . .
CardBus PC Card Interface Control Terminals . . . . . . . . . . . . . . . . . . . . . .
Reserved Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SD/MMC Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Stick/PRO Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart Media/XD Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart Card Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC Card—Card Detect and Voltage Sense Connections . . . . . . . . . . . . .
TPS2228 Control Logic—xVPP/VCORE . . . . . . . . . . . . . . . . . . . . . . . . . . .
TPS2228 Control Logic—xVCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TPS2226 Control Logic—xVPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TPS2226 Control Logic—xVCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus Socket Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PCI6x21/PCI6x11 Registers Used to Program Serial-Bus Devices . . . . .
EEPROM Loading Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interrupt Mask and Flag Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC Card Interrupt Events and Description . . . . . . . . . . . . . . . . . . . . . . . . . .
Interrupt Pin Register Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Requirements for Internal/External 1.5-V Core Power Supply . . . . . . . . .
Power-Management Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Function 3 Power-Management Registers . . . . . . . . . . . . . . . . . . . . . . . . . .
Function 4 Power-Management Registers . . . . . . . . . . . . . . . . . . . . . . . . . .
Function 5 Power-Management Registers . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
1−5
2−5
2−9
2−11
2−14
2−15
2−15
2−16
2−17
2−18
2−19
2−20
2−22
2−23
2−24
2−26
2−26
2−26
2−27
2−28
3−5
3−6
3−6
3−7
3−7
3−9
3−10
3−13
3−16
3−16
3−18
3−19
3−20
3−24
3−24
3−24
3−25
xi
Table
4−1
4−2
4−3
4−4
4−5
4−6
4−7
4−8
4−9
4−10
4−11
4−12
4−13
4−14
4−15
4−16
4−17
4−18
4−19
4−20
4−21
4−22
4−23
4−24
4−25
5−1
5−2
5−3
5−4
5−5
5−6
5−7
5−8
5−9
5−10
5−11
5−12
5−13
5−14
xii
Title
Bit Field Access Tag Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functions 0 and 1 PCI Configuration Register Map . . . . . . . . . . . . . . . . . .
Command Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Secondary Status Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interrupt Pin Register Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bridge Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General-Purpose Event Status Register Description . . . . . . . . . . . . . . . . .
General-Purpose Event Enable Register Description . . . . . . . . . . . . . . . .
General-Purpose Input Register Description . . . . . . . . . . . . . . . . . . . . . . . .
General-Purpose Output Register Description . . . . . . . . . . . . . . . . . . . . . .
Multifunction Routing Status Register Description . . . . . . . . . . . . . . . . . . .
Retry Status Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Card Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Device Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostic Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Management Capabilities Register Description . . . . . . . . . . . . . . .
Power Management Control/Status Register Description . . . . . . . . . . . . .
Power Management Control/Status Bridge Support Extensions Register
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial Bus Data Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial Bus Index Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial Bus Slave Address Register Description . . . . . . . . . . . . . . . . . . . . .
Serial Bus Control/Status Register Description . . . . . . . . . . . . . . . . . . . . . .
ExCA Registers and Offsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ExCA Identification and Revision Register Description . . . . . . . . . . . . . . .
ExCA Interface Status Register Description . . . . . . . . . . . . . . . . . . . . . . . .
ExCA Power Control Register Description—82365SL Support . . . . . . . .
ExCA Power Control Register Description—82365SL-DF Support . . . . .
ExCA Interrupt and General Control Register Description . . . . . . . . . . . .
ExCA Card Status-Change Register Description . . . . . . . . . . . . . . . . . . . .
ExCA Card Status-Change Interrupt Configuration Register
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ExCA Address Window Enable Register Description . . . . . . . . . . . . . . . .
ExCA I/O Window Control Register Description . . . . . . . . . . . . . . . . . . . . .
ExCA Memory Windows 0−4 Start-Address High-Byte Registers
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ExCA Memory Windows 0−4 End-Address High-Byte Registers
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ExCA Memory Windows 0−4 Offset-Address High-Byte Registers
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ExCA Card Detect and General Control Register Description . . . . . . . . .
Page
4−1
4−1
4−4
4−5
4−9
4−15
4−15
4−18
4−21
4−22
4−23
4−23
4−24
4−25
4−26
4−27
4−28
4−29
4−31
4−32
4−33
4−34
4−34
4−35
4−36
5−3
5−5
5−6
5−7
5−7
5−8
5−9
5−10
5−11
5−12
5−16
5−18
5−20
5−21
Table
5−15
6−1
6−2
6−3
6−4
6−5
6−6
6−7
7−1
7−2
7−3
7−4
7−5
7−6
7−7
7−8
7−9
7−10
7−11
7−12
7−13
7−14
7−15
7−16
8−1
8−2
8−3
8−4
8−5
8−6
8−7
8−8
8−9
8−10
8−11
8−12
8−13
8−14
8−15
8−16
8−17
9−1
9−2
Title
ExCA Global Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . .
CardBus Socket Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Socket Event Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Socket Mask Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Socket Present State Register Description . . . . . . . . . . . . . . . . . . . . . . . . .
Socket Force Event Register Description . . . . . . . . . . . . . . . . . . . . . . . . . .
Socket Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Socket Power Management Register Description . . . . . . . . . . . . . . . . . . .
Function 3 Configuration Register Map . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Command Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Class Code and Revision ID Register Description . . . . . . . . . . . . . . . . . . .
Latency Timer and Class Cache Line Size Register Description . . . . . . .
Header Type and BIST Register Description . . . . . . . . . . . . . . . . . . . . . . . .
Flash Media Base Address Register Description . . . . . . . . . . . . . . . . . . . .
PCI Interrupt Pin Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum Grant Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Latency Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Capability ID and Next Item Pointer Registers Description . . . . . . . . . . . .
Power Management Capabilities Register Description . . . . . . . . . . . . . . .
Power Management Control and Status Register Description . . . . . . . . .
General Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Subsystem Access Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostic Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Function 4 Configuration Register Map . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Command Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Class Code and Revision ID Register Description . . . . . . . . . . . . . . . . . . .
Latency Timer and Class Cache Line Size Register Description . . . . . . .
Header Type and BIST Register Description . . . . . . . . . . . . . . . . . . . . . . . .
SD host Base Address Register Description . . . . . . . . . . . . . . . . . . . . . . . .
PCI Interrupt Pin Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum Grant Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Latency Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Latency Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Capability ID and Next Item Pointer Registers Description . . . . . . . . . . . .
Power Management Capabilities Register Description . . . . . . . . . . . . . . .
Power Management Control and Status Register Description . . . . . . . . .
General Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Subsystem Access Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostic Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Function 5 Configuration Register Map . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Command Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
5−22
6−1
6−2
6−3
6−4
6−6
6−7
6−8
7−1
7−3
7−4
7−5
7−5
7−6
7−6
7−8
7−9
7−9
7−10
7−11
7−12
7−13
7−14
7−15
8−1
8−3
8−4
8−5
8−6
8−6
8−7
8−9
8−9
8−10
8−10
8−11
8−12
8−13
8−14
8−15
8−15
9−1
9−3
xiii
Table
9−3
9−4
9−5
9−6
9−7
9−8
9−9
9−10
9−11
9−12
9−13
9−14
9−15
9−16
xiv
Title
Status Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Class Code and Revision ID Register Description . . . . . . . . . . . . . . . . . . .
Latency Timer and Class Cache Line Size Register Description . . . . . . .
Header Type and BIST Register Description . . . . . . . . . . . . . . . . . . . . . . . .
PCI Interrupt Pin Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum Grant Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Latency Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Capability ID and Next Item Pointer Registers Description . . . . . . . . . . . .
Power Management Capabilities Register Description . . . . . . . . . . . . . . .
Power Management Control and Status Register Description . . . . . . . . .
General Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Subsystem ID Alias Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart Card Configuration 1 Register Description . . . . . . . . . . . . . . . . . . . .
Smart Card Configuration 2 Register Description . . . . . . . . . . . . . . . . . . . .
Page
9−4
9−5
9−5
9−6
9−9
9−9
9−10
9−10
9−11
9−12
9−13
9−14
9−16
9−17
1 Introduction
The Texas Instruments PCI6621 controller is an integrated dual-socket UltraMedia PC Card controller, Smart Card
controller, and flash media controller. This high-performance integrated solution provides the latest in PC Card, Smart
Card, Secure Digital (SD), MultiMediaCard (MMC), Memory Stick/PRO, SmartMedia, and XD technology.
The Texas Instruments PCI6421 controller is an integrated dual-socket UltraMedia PC Card controller, and flash
media controller. This high-performance integrated solution provides the latest in PC Card, SD, MMC, Memory
Stick/PRO, SmartMedia, and XD technology.
The Texas Instruments PCI6611 controller is an integrated single-socket UltraMedia PC Card controller, Smart Card
controller, and flash media controller. This high-performance integrated solution provides the latest in PC Card, Smart
Card, SD, MMC, Memory Stick/PRO, SmartMedia, and XD technology.
The Texas Instruments PCI6411 controller is an integrated single-socket UltraMedia PC Card controller and flash
media controller. This high-performance integrated solution provides the latest in PC Card, SD, MMC, Memory
Stick/PRO, SmartMedia, and XD technology.
For the remainder of this document, the PCI6x21 controller refers to the PCI6621 and PCI6421 controllers, and the
PCI6x11 controller refers to the PCI6611 and PCI6411 controllers.
1.1 Controller Functional Description
1.1.1
PCI6621 Controller
The PCI6621 controller is a five-function PCI controller compliant with PCI Local Bus Specification, Revision 2.3.
Functions 0 and 1 provide the independent PC Card socket controllers compliant with the PC Card Standard (Release
8.1). The PCI6621 controller provides features that make it the best choice for bridging between the PCI bus and PC
Cards, and supports any combination of Smart Card, Flash Media, 16-bit, CardBus, and USB custom card interface
PC Cards in the two sockets, powered at 5 V or 3.3 V, as required.
All card signals are internally buffered to allow hot insertion and removal without external buffering. The PCI6621
controller is register compatible with the Intel 82365SL-DF ExCA controller. The PCI6621 internal data path logic
allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for maximum performance. Independent
buffering and a pipeline architecture provide an unsurpassed performance level with sustained bursting. The
PCI6621 controller can be programmed to accept posted writes to improve bus utilization.
Function 3 of the PCI6621 controller is a PCI-based Flash Media controller that supports Memory Stick, Memory
Stick-Pro, SmartMedia, XD, SD, and MMC cards. This function controls communication with these Flash Media cards
through a passive PC Card adapter or through a dedicated Flash Media socket. In addition, this function includes DMA
capabilities for improved Flash Media performance.
Function 4 of the PCI6621 controller is a PCI-based SD host controller that supports MMC, SD, and SDIO cards. This
function controls communication with these Flash Media cards through a passive PC Card adapter or through a
dedicated Flash Media socket. In addition, this function is compliant with the SD Host Controller Standard
Specification and includes both DMA capabilities and support for SD suspend/resume.
Function 5 of the PCI6621 controller is a PCI-based Smart Card controller used for communication with Smart Cards
inserted in PC Card adapters. Utilizing Smart Card technology from Gemplus, this function provides compatibility with
many different types of Smart Cards.
1.1.2
PCI6421 Controller
The PCI6421 controller is a four-function PCI controller compliant with PCI Local Bus Specification, Revision 2.3.
1−1
Functions 0 and 1 provide the independent PC Card socket controllers compliant with the PC Card Standard (Release
8.1). The PCI6421 controller provides features that make it the best choice for bridging between the PCI bus and PC
Cards, and supports any combination of Smart Card, Flash Media, 16-bit, CardBus, and USB custom card interface
PC Cards in the two sockets, powered at 5 V or 3.3 V, as required.
All card signals are internally buffered to allow hot insertion and removal without external buffering. The PCI6421
controller is register compatible with the Intel 82365SL-DF ExCA controller. The PCI6421 internal data path logic
allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for maximum performance. Independent
buffering and a pipeline architecture provide an unsurpassed performance level with sustained bursting. The
PCI6421 controller can be programmed to accept posted writes to improve bus utilization.
Function 3 of the PCI6421 controller is a PCI-based Flash Media controller that supports Memory Stick, Memory
Stick-Pro, SmartMedia, XD, SD, and MMC cards. This function controls communication with these Flash Media cards
through a passive PC Card adapter or through a dedicated Flash Media socket. In addition, this function includes DMA
capabilities for improved Flash Media performance.
Function 4 of the PCI6421 controller is a PCI-based SD host controller that supports MMC, SD, and SDIO cards. This
function controls communication with these Flash Media cards through a passive PC Card adapter or through a
dedicated Flash Media socket. In addition, this function is compliant with the SD Host Controller Standard
Specification and includes both DMA capabilities and support for SD suspend/resume.
1.1.3
PCI6611 Controller
The PCI6611 controller is a four-function PCI controller compliant with PCI Local Bus Specification, Revision 2.3.
Function 0 provides an independent PC Card socket controller compliant with the PC Card Standard (Release 8.1).
The PCI6611 controller provides features that make it the best choice for bridging between the PCI bus and PC Cards,
and supports Smart Card, Flash Media, 16-bit, CardBus or USB custom card interface PC Cards, powered at 5 V
or 3.3 V, as required.
All card signals are internally buffered to allow hot insertion and removal without external buffering. The PCI6611
controller is register compatible with the Intel 82365SL-DF ExCA controller. The PCI6611 internal data path logic
allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for maximum performance. Independent
buffering and a pipeline architecture provide an unsurpassed performance level with sustained bursting. The
PCI6611 controller can be programmed to accept posted writes to improve bus utilization.
Function 3 of the PCI6611 controller is a PCI-based Flash Media controller that supports Memory Stick, Memory
Stick-Pro, SmartMedia, XD, SD, and MMC cards. This function controls communication with these Flash Media cards
through a passive PC Card adapter or through a dedicated Flash Media socket. In addition, this function includes DMA
capabilities for improved Flash Media performance.
Function 4 of the PCI6611 controller is a PCI-based SD host controller that supports MMC, SD, and SDIO cards. This
function controls communication with these Flash Media cards through a passive PC Card adapter or through a
dedicated Flash Media socket. In addition, this function is compliant with the SD Host Controller Standard
Specification and includes both DMA capabilities and support for SD suspend/resume.
Function 5 of the PCI6611 controller is a PCI-based Smart Card controller used for communication with Smart Cards
inserted in PC Card adapters. Utilizing Smart Card technology from Gemplus, this function provides compatibility with
many different types of Smart Cards.
1.1.4
PCI6411 Controller
The PCI6411 controller is a three-function PCI controller compliant with PCI Local Bus Specification, Revision 2.3.
Function 0 provides an independent PC Card socket controller compliant with the PC Card Standard (Release 8.1).
The PCI6411 controller provides features that make it the best choice for bridging between the PCI bus and PC Cards,
and supports Smart Card, Flash Media, 16-bit, CardBus or USB custom card interface PC Cards, powered at 5 V
or 3.3 V, as required.
1−2
All card signals are internally buffered to allow hot insertion and removal without external buffering. The PCI6411
controller is register compatible with the Intel 82365SL-DF ExCA controller. The PCI6411 internal data path logic
allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for maximum performance. Independent
buffering and a pipeline architecture provide an unsurpassed performance level with sustained bursting. The
PCI6411 controller can be programmed to accept posted writes to improve bus utilization.
Function 3 of the PCI6411 controller is a PCI-based Flash Media controller that supports Memory Stick, Memory
Stick-Pro, SmartMedia, XD, SD, and MMC cards. This function controls communication with these Flash Media cards
through a passive PC Card adapter or through a dedicated Flash Media socket. In addition, this function includes DMA
capabilities for improved Flash Media performance.
Function 4 of the PCI6411 controller is a PCI-based SD host controller that supports MMC, SD, and SDIO cards. This
function controls communication with these Flash Media cards through a passive PC Card adapter or through a
dedicated Flash Media socket. In addition, this function is compliant with the SD Host Controller Standard
Specification and includes both DMA capabilities and support for SD suspend/resume.
1.1.5
Multifunctional Terminals
Various implementation-specific functions and general-purpose inputs and outputs are provided through eight
multifunction terminals. These terminals present a system with options in PC/PCI DMA, PCI LOCK, serial and parallel
interrupts, PC Card activity indicator LEDs, flash media LEDs, and other platform-specific signals. PCI complaint
general-purpose events may be programmed and controlled through the multifunction terminals, and an
ACPI-compliant programming interface is included for the general-purpose inputs and outputs.
1.1.6
PCI Bus Power Management
The PCI6x21/PCI6x11 controller is compliant with the latest PCI Bus Power Management Specification, and provides
several low-power modes, which enable the host power system to further reduce power consumption.
1.1.7
Power Switch Interface
The PCI6x21/PCI6x11 controller also has a three-pin serial interface compatible with the Texas Instruments TPS2228
(default), TPS2226, TPS2224, and TPS2223A power switches. All three power switches provide power to the
CardBus socket(s) on the PCI6x21/PCI6x11 controller. The power to each dedicated socket is controlled through
separate power control pins. Each of these power control pins can be connected to an external 3.3-V power switch.
1.2 Features
The PCI6x21/PCI6x11 controller supports the following features:
•
PC Card Standard 8.1 compliant
•
PCI Bus Power Management Interface Specification 1.1 compliant
•
Advanced Configuration and Power Interface (ACPI) Specification 2.0 compliant
•
PCI Local Bus Specification Revision 2.3 compliant
•
PC 98/99 and PC2001 compliant
•
Windows Logo Program 2.0 compliant
•
PCI Bus Interface Specification for PCI-to-CardBus Bridges
•
1.5-V core logic and 3.3-V I/O cells with internal voltage regulator to generate 1.5-V core VCC
•
Universal PCI interfaces compatible with 3.3-V and 5-V PCI signaling environments
•
Supports PC Card or CardBus with hot insertion and removal
•
Supports 132-MBps burst transfers to maximize data throughput on both the PCI bus and the CardBus
1−3
•
Supports serialized IRQ with PCI interrupts
•
Programmable multifunction terminals
•
Many interrupt modes supported
•
Serial ROM interface for loading subsystem ID and subsystem vendor ID
•
ExCA-compatible registers are mapped in memory or I/O space
•
Intel 82365SL-DF register compatible
•
Supports ring indicate, SUSPEND, and PCI CLKRUN protocols and PCI bus Lock (LOCK)
•
Provides VGA/palette memory and I/O, and subtractive decoding options, LED activity terminals
•
Compliant with Intel Mobile Power Guideline 2000
•
Power-down features to conserve energy in battery-powered applications include: automatic device power
down during suspend
•
PCI power-management D0, D1, D2, and D3 power states
•
Advanced submicron, low-power CMOS technology
1.3 Related Documents
1−4
•
Advanced Configuration and Power Interface (ACPI) Specification (Revision 2.0)
•
PC Card Standard (Release 8.1)
•
PCI Bus Power Management Interface Specification (Revision 1.1)
•
Serial Bus Protocol 2 (SBP-2)
•
Serialized IRQ Support for PCI Systems
•
PCI Mobile Design Guide
•
PCI Bus Power Management Interface Specification for PCI to CardBus Bridges
•
PCI14xx Implementation Guide for D3 Wake-Up
•
PCI to PCMCIA CardBus Bridge Register Description
•
Texas Instruments TPS2224 and TPS2226 product data sheet, SLVS317
•
Texas Instruments TPS2223A product data sheet, SLVS428
•
Texas Instruments TPS2228 product data sheet, SLVS419
•
PCI Local Bus Specification (Revision 2.3)
•
PCMCIA Proposal (262)
•
The Multimedia Card System Specification, Version 3.31
•
SD Memory Card Specifications, SD Group, March 2000
•
Memory Stick Format Specification, Version 2.0 (Memory Stick-Pro)
•
ISO Standards for Identification Cards ISO/IEC 7816
•
SD Host Controller Standard Specification, rev. 1.0
•
Memory Stick Format Specification, Sony Confidential, ver. 2.0
•
SmartMedia Standard 2000, May 19, 2000
1.4 Trademarks
Intel is a trademark of Intel Corporation.
TI and MicroStar BGA are trademarks of Texas Instruments.
i.LINK is a trademark of Sony Corporation of America.
Memory Stick is a trademark of Sony Kabushiki Kaisha TA Sony Corporation, Japan.
Other trademarks are the property of their respective owners.
1.5 Terms and Definitions
Terms and definitions used in this document are given in Table 1−1.
Table 1−1. Terms and Definitions
TERM
DEFINITIONS
AT
AT (advanced technology, as in PC AT) attachment interface
ATA driver
An existing host software component that loads when any flash media adapter and card is inserted into a PC Card
socket. This driver is logically attached to a predefined CIS provided by the PCI6x21/PCI6x11 controller when the
adapter and media are both inserted.
CIS
Card information structure. Tuple list defined by the PC Card standard to communicate card information to the host
computer
CSR
Control and status register
Flash Media
SmartMedia, Memory Stick, MS/PRO, xD, MMC, or SD/MMC Flash operating in an ATA compatible mode
ISO/IEC 7816
The Smart Card standard
Memory Stick
A small-form-factor flash interface that is defined, promoted, and licensed by Sony
Memory Stick Pro
Memory Stick Version 2.0, same physical dimensions of MS with higher speed data exchange and higher data
capacity than conventional Memory Stick.
MMC
MultiMediaCard. Specified by the MMC Association, and scope is encompassed by the SD Flash specification.
PCMCIA
Personal Computer Memory Card International Association. Standards body that governs the PC Card standards
RSVD
Reserved for future use
SD Flash
Secure Digital Flash. Standard governed by the SD Association
Smart Card
The name applied to ID cards containing integrated circuits, as defined by ISO/IEC 7816-1
SPI
Serial peripheral interface, a general-purpose synchronous serial interface. For more information, see the
Multimedia Card System Specification, version 3.2.
SSFDC
Solid State Floppy Disk Card. The SSFDC Forum specifies SmartMedia
TI Smart Card driver
A qualified software component provided by Texas Instruments that loads when an UltraMedia-based Smart Card
adapter is inserted into a PC Card slot. This driver is logically attached to a CIS provided by the PCI6621 when the
adapter and media are both inserted.
UltraMedia
De facto industry standard promoted by Texas Instruments that integrates CardBus, Smart Card, Memory Stick,
MultiMediaCard/Secure Digital and SmartMedia functionality into one controller.
xD
Extreme Digital, small form factor flash based on SmartMedia cards, developed by Fuji Film and Olympus Optical.
1.6 Ordering Information
ORDERING NUMBER
VOLTAGE
PACKAGE
PCI6621
Dual Socket CardBus and UltraMedia Controller with
Dedicated Flash Media Socket
NAME
3.3-V, 5-V tolerant I/Os
288-ball PBGA
(GHK or ZHK)
PCI6421
Dual Socket CardBus and UltraMedia Controller with
Dedicated Flash Media Socket
3.3-V, 5-V tolerant I/Os
288-ball PBGA
(GHK or ZHK)
PCI6611
Single Socket CardBus and UltraMedia Controller with
Dedicated Flash Media Socket
3.3-V, 5-V tolerant I/Os
288-ball PBGA
(GHK or ZHK)
PCI6411
Single Socket CardBus and UltraMedia Controller with
Dedicated Flash Media Socket
3.3-V, 5-V tolerant I/Os
288-ball PBGA
(GHK or ZHK)
1−5
1−6
2 Terminal Descriptions
The PCI6x21/PCI6x11 controller is available in the 288-terminal MicroStar BGA package (GHK) or the 288-terminal
lead-free (Pb, atomic number 82) MicroStar BGA package (ZHK). Figure 2−1 is a pin diagram of the PCI6621
package. Figure 2−2 is a pin diagram of the PCI6421 package. Figure 2−3 is a pin diagram of the PCI6611 package.
Figure 2−4 is a pin diagram of the PCI6411 package.
W
AD27
VCCP
C/BE3
IDSEL
AD19
C/BE2
STOP
C/BE1
VCCP
C/BE0
AD4
AD0
RSVD
RSVD
RSVD
NC
RSVD
V
AD30
AD29
AD26
AD24
AD23
AD18
FRAME
PERR
AD15
AD11
AD7
AD3
RSVD
RSVD
RSVD
RSVD
AVDD
RSVD
VDPLL_
33
U
REQ
AD31
AD28
AD25
AD22
AD17
IRDY
SERR
AD14
AD10
AD6
AD2
RSVD
AGND
RSVD
AGND
RSVD
RSVD
RSVD
T
GRST
GNT
RI_OUT
//PME
VSSPLL
VDPLL_
15
RSVD
PHY_
TEST_
MA
RSVD
RSVD
VSSPLL RSVD
B_CAD1
//B_D4
B_CAD2
//B_D11
B_CAD0
//B_D3
B_CAD4
//B_D12
B_RSVD
//B_D14
B_CAD5
//B_D6
B_CAD6
//B_D13
B_CAD7
//B_D7
B_CAD9 B_CC/BE0
//B_A10 //B_CE1
B_CAD13
//B_IORD
B_CAD12 B_CAD11 B_CAD10
//B_OE //B_CE2
//B_A11
R
MFUNC6 SUSPEND PRST
P
MFUNC2 MFUNC3 MFUNC4
N
DATA
M
CLK_48
L
SC_
DATA
K
J
AD21
PCLK
LATCH MFUNC0
SDA
SCL
SM_R/B SM_ PHYS
//
SC_RST
_WP//
SC_RFU SC_FCB
SD_DAT2
SD_DAT3 SD_CMD//
//SM_D7// SM_ALE//
G
VR_
PORT
MS_SDIO
(DATA0)//
SD_DAT0//
SM_D0
SM_D4//
SC_GPIO6
D
A_CAD31
//A_D10
A_RSVD
//A_D2
C
A_CAD30
//A_D9
A_CAD28
//A_D8
B
A_CAD27
//A_D0
A_CSTSCHG
//A_BVD1
(STSCHG/RI)
AD8
AD1
AGND
B_CCD1
//B_CD1
MFUNC1
VCC
GND
VCC
VCC
RSVD
VCC
B_CAD3
//B_D5
GND
GND
GND
GND
GND
B_CAD15
//B_IOWR
VCC
GND
GND
GND
VCC
B_CPAR B_CC/BE1 B_RSVD
//B_A13
//B_A18
//B_A8
B_CAD16 B_CAD14
//B_A17
//B_A9
SM_CLE//
SM_D5//
SM_RE//
SC_GPIO1 SC_GPIO5 SC_GPIO0
VCC
GND
GND
GND
VCC
B_CIRDY
//B_A15
B_CSTOP B_CPERR
//B_A20 //B_A14
B_CBLOCK
MS_DATA3
//SD_DAT3
//SM_D3
VCC
VCC
VCC
VCC
GND
B_CAD19 B_CAD18
//B_A7
//B_A25
B_CTRDY B_CCLK
//B_A22 //B_A16
B_CDEVSEL
VCC
GND
B_CAD21
//B_A5
B_CAD17 B_CC/BE2B_CFRAME
//B_A12 //B_A23
//B_A24
B_CC/BE3
//B_REG
B_CRST B_CAD20
//B_A6
//B_RESET
SC_
VCC_
5V
SD_WP//
SM_CE
GND
SD_CLK//
GND
1
2
A_CAD20 A_CPAR
//A_A6
//A_A13
A_CAD14 A_CC/BE0
//A_CE1
//A_A9
A_CCD2 A_CAD24 A_CREQ A_CVS2
//A_CD2 //A_A2 //A_INPACK //A_VS2
B_CAD8
//B_D15
B_CGNT
//B_WE
B_CSTSCHG
A_CAD6
//A_D13
A_CC/BE2 A_CPERR
//A_A12
//A_A14
MS_CD SM_CD
SD_CD
//B_BVD1
A_CCLKRUN
//A_WP
(IOIS16)
A_CCLK A_CBLOCK A_CAD15 A_CAD8
//A_A16
//A_A19 //A_IOWR //A_D15
A_CAD13 A_CAD11
//A_IORD //A_OE
A_CAD7
//A_D7
A_CSERR A_CAD26 A_CAD23 A_CAD21 A_CAD18 A_CIRDY A_CGNT A_CC/BE1 A_CAD12 A_CAD10 A_RSVD
//A_A7
//A_WAIT //A_A0
//A_A11 //A_CE2 //A_D14
//A_A15
//A_WE
//A_A3
//A_A8
//A_A5
3
A_CAD25
//A_A1
VCCA
4
5
A_CRST A_CAD17 A_CTRDY A_CSTOP A_CAD16
//A_A17
//A_RESET //A_A24
//A_A20
//A_A22
6
7
8
9
10
VCCB
//B_A19
//B_A21
B_CVS2
//B_VS2
B_CAD23 B_CREQ B_CAD22
//B_A3 //B_INPACK //B_A4
A_CAD3 A_CAD0
//A_D5 //A_D3
B_CAD26 B_CAD24
//B_A2
//B_A0
A_CINT//
A_CC/BE3 A_CAD22 A_CAD19 A_CFRAME A_CDEVSEL A_RSVD
A_READY
//A_A25
//A_A4
//A_REG
//A_A21 //A_A18
//A_A23
(IREQ)
VR_
PORT
(STSCHG/RI)
A_CAD29
//A_D1
A_CAUDIO
A_CVS1
//A_BVD2
//A_VS1
(SPKR)
A
TEST0
AVDD
AD12
SM_EL_WP
MC_PWR MC_PWR
SD_CMD
_CTRL_0 _CTRL_1
AVDD
DEVSEL
MS_CLK//
MS_DATA1 MS_DATA2
//SD_DAT1 //SD_DAT2
//SM_D2
//SM_D1
B_USB_EN A_USB_EN
RSVD
VCC
//SM_WE
E
AD5
PAR
MS_BS//
F
AD9
SD_CLK// SD_DAT1//
SD_DAT0//
VR_EN
AD13
MFUNC5
SC_CLK
SC_GPIO4 SC_GPIO3 SC_GPIO2
H
TRDY
AD20
SC_
PWR_ CLOCK SPKROUT
CTRL
SC_CD SC_OC
//SM_D6//
AD16
A_CAD4
//A_D12
A_CCD1
//A_CD1
B_CAD27
//B_D0
B_CAUDIO
//B_BVD2
(SPKR)
B_CVS1
//B_VS1
VCCB
B_CAD25
//B_A1
B_CINT
A_CAD1 B_CAD31 B_CAD29 B_CCD2 B_CSERR //B_READY
//B_D1
//B_D10
//B_CD2 //B_WAIT (IREQ)
//A_D4
VCCA
A_CAD9
//A_A10
A_CAD5
//A_D6
A_CAD2
//A_D11
11
12
13
14
B_RSVD B_CAD30 B_CAD28
//B_D2
//B_D8
//B_D9
15
16
17
B_CCLKRUN
//B_WP
(IOIS16)
18
19
Figure 2−1. PCI6621 GHK/ZHK-Package Terminal Diagram
2−1
W
AD27
VCCP
C/BE3
IDSEL
AD19
C/BE2
STOP
C/BE1
VCCP
C/BE0
AD4
AD0
RSVD
RSVD
RSVD
NC
RSVD
V
AD30
AD29
AD26
AD24
AD23
AD18
FRAME
PERR
AD15
AD11
AD7
AD3
RSVD
RSVD
RSVD
RSVD
AVDD
RSVD
VDPLL
_33
U
REQ
AD31
AD28
AD25
AD22
AD17
IRDY
SERR
AD14
AD10
AD6
AD2
RSVD
AGND
RSVD
AGND
RSVD
RSVD
RSVD
T
GRST
GNT
RI_OUT
//PME
VSSPLL VDPLL
_15
RSVD
R
MFUNC6 SUSPEND PRST
P
MFUNC2 MFUNC3 MFUNC4
AD21
PCLK
PAR
B_CAD6
//B_D13
B_CAD7
//B_D7
B_CAD9 B_CC/BE0
//B_A10 //B_CE1
B_CAD3
//B_D5
RSVD
RSVD
GND
GND
GND
GND
GND
B_CAD15
//B_IOWR
RSVD
RSVD
RSVD
VCC
GND
GND
GND
VCC
B_CPAR B_CC/BE1 B_RSVD
//B_A13
//B_A18
//B_A8
B_CAD16 B_CAD14
//B_A17
//B_A9
SM_CLE
VCC
GND
GND
GND
VCC
B_CIRDY
//B_A15
B_CGNT
//B_WE
B_CSTOP B_CPERR
//B_A14
//B_A20
B_CBLOCK
VCC
VCC
VCC
VCC
GND
B_CAD19 B_CAD18
//B_A7
//B_A25
B_CTRDY B_CCLK
//B_A22 //B_A16
B_CDEVSEL
VCC
GND
B_CAD21
//B_A5
B_CAD17 B_CC/BE2B_CFRAME
//B_A12 //B_A23
//B_A24
B_CC/BE3
//B_REG
B_CRST B_CAD20
//B_A6
//B_RESET
SD_CLK
SD_DAT1
SM_ALE
//SM_RE
//SM_D5
H
VR_
PORT
VR_EN
SD_DAT0//
SM_D4
MS_DATA3//
SD_DAT3
//SM_D3
G
MS_SDIO
(DATA0)//
SD_DAT0//
SM_D0
CLOCK SPKROUT
SD_WP//
SM_CE
MS_CLK//
MS_DATA1 MS_DATA2
//SD_DAT1 //SD_DAT2
//SM_D2
//SM_D1
GND
SD_CLK//
GND
A_CAD20 A_CPAR A_CAD14 A_CC/BE0
//A_A6
//A_CE1
//A_A13
//A_A9
B_CAD8
//B_D15
MS_BS//
A_CCD2 A_CAD24 A_CREQ A_CVS2
//A_CD2 //A_A2 //A_INPACK //A_VS2
SD_CD
//B_BVD1
A_CCLK A_CBLOCK A_CAD15 A_CAD8
//A_A16
//A_A19 //A_IOWR //A_D15
B_CAD26 B_CAD24
//B_A2
//B_A0
A_CCLKRUN A_CINT//
A_READY
(IREQ)
A_CC/BE3 A_CAD22 A_CAD19 A_CFRAME
//A_A25
//A_A4
//A_REG
//A_A23
A_CDEVSEL
//A_A21
A_RSVD
//A_A18
A_CAD13 A_CAD11
//A_IORD //A_OE
A_CAD7
//A_D7
A_CSERR A_CAD26 A_CAD23 A_CAD21 A_CAD18 A_CIRDY A_CGNT A_CC/BE1 A_CAD12 A_CAD10 A_RSVD
//A_WAIT //A_A0
//A_A7
//A_A11 //A_CE2 //A_D14
//A_A15
//A_WE
//A_A8
//A_A3
//A_A5
3
//B_A19
//B_A21
A_CAD25
//A_A1
VCCA
4
5
A_CRST A_CAD17 A_CTRDY A_CSTOP A_CAD16
//A_A17
//A_RESET //A_A24
//A_A20
//A_A22
6
7
8
9
10
B_CVS2
//B_VS2
B_CAD23 B_CREQ B_CAD22
//B_A3 //B_INPACK //B_A4
A_CAD3 A_CAD0
//A_D3
//A_D5
A_CAD29
//A_D1
A_CAUDIO
A_CVS1
//A_BVD2
//A_VS1
(SPKR)
VCCB
(STSCHG/RI)
A_CAD4
//A_D12
A_CCD1 B_CAD27
//B_D0
//A_CD1
B_CAUDIO
//B_BVD2
(SPKR)
B_CVS1
//B_VS1
VCCB
B_CAD25
//B_A1
B_CINT
A_CAD1 B_CAD31 B_CAD29 B_CCD2 B_CSERR //B_READY
//B_D1
//B_D10
//B_CD2 //B_WAIT (IREQ)
//A_D4
VCCA
A_CAD9
//A_A10
A_CAD5
//A_D6
A_CAD2
//A_D11
11
12
13
14
B_RSVD B_CAD30 B_CAD28
//B_D2
//B_D8
//B_D9
15
Figure 2−2. PCI6421 GHK/ZHK-Package Terminal Diagram
2−2
B_CAD12 B_CAD11 B_CAD10
//B_OE //B_CE2
//B_A11
B_CAD13
//B_IORD
B_CSTSCHG
A_CAD6
//A_D13
A_CC/BE2 A_CPERR
//A_A12
//A_A14
MS_CD SM_CD
//SM_WE
//A_WP
(IOIS16)
VR_
PORT
SM_EL_WP
MC_PWR MC_PWR
SD_CMD
_CTRL_0 _CTRL_1
2
B_CAD5
//B_D6
VCC
SD_CMD//
1
B_RSVD
//B_D14
RSVD
//SM_D7
A
B_CAD4
//B_D12
VCC
SD_DAT3
A_CSTSCHG
B_CAD0
//B_D3
VCC
//SM_D6
//A_BVD1
(STSCHG/RI)
B_CAD2
//B_D11
GND
SD_DAT2
A_CAD27
//A_D0
B_CAD1
//B_D4
VCC
J
B
RSVD
MFUNC1
SM_R/B
A_CAD28
//A_D8
VSSPLL
SCL
K
A_CAD30
//A_D9
RSVD
B_CCD1
//B_CD1
RSVD
C
RSVD
AGND
RSVD
A_RSVD
//A_D2
TEST0
PHY_
TEST_
MA
AVDD
AD1
L
A_CAD31
//A_D10
AVDD
AD8
SDA
D
RSVD
AD12
LATCH MFUNC0
B_USB_EN A_USB_EN
AD5
DEVSEL
CLK_48
E
AD9
VCC
M
F
AD13
MFUNC5
DATA
_WP
TRDY
AD20
N
SM_PHYS
AD16
16
17
B_CCLKRUN
//B_WP
(IOIS16)
18
19
W
AD27
VCCP
C/BE3
IDSEL
AD19
C/BE2
STOP
C/BE1
VCCP
C/BE0
AD4
AD0
RSVD
RSVD
RSVD
NC
RSVD
V
AD30
AD29
AD26
AD24
AD23
AD18
FRAME
PERR
AD15
AD11
AD7
AD3
RSVD
RSVD
RSVD
RSVD
AVDD
RSVD
VDPLL
_33
U
REQ
AD31
AD28
AD25
AD22
AD17
IRDY
SERR
AD14
AD10
AD6
AD2
RSVD
AGND
RSVD
AGND
RSVD
RSVD
RSVD
T
GRST
GNT
RI_OUT
//PME
VSSPLL
VDPLL
_15
RSVD
PHY_
TEST_
MA
RSVD
RSVD
VSSPLL RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
R
MFUNC6 SUSPEND PRST
P
MFUNC2 MFUNC3 MFUNC4
N
DATA
M
CLK_48
L
SC_
DATA
K
SM_R/B
//SC_RFU
AD21
PCLK
LATCH MFUNC0
SDA
SCL
SM_
SC_RST
// SC_FCB
J
SD_DAT2
SD_DAT3
SD_CMD//
//SM_D6//
//SM_D7//
SM_ALE//
H
G
F
VR_
PORT
MS_SDIO
(DATA0)//
SD_DAT0//
SM_D0
MC_PWR MC_PWR
_CTRL_0 _CTRL_1
AD8
AD1
AGND
RSVD
MFUNC1
VCC
GND
VCC
VCC
RSVD
VCC
RSVD
GND
GND
GND
GND
GND
RSVD
VCC
GND
GND
GND
VCC
RSVD
VCC
GND
GND
GND
VCC
RSVD
VCC
VCC
VCC
VCC
VCC
GND
SM_D5//
SM_CLE //
SD_WP//
SM_CE
GND
SD_CLK//
B_USB_EN A_USB_EN
D
A_CAD31
//A_D10
A_RSVD
//A_D2
C
A_CAD30
//A_D9
A_CAD28
//A_D8
B
A_CAD27
//A_D0
A_CSTSCHG
//A_BVD1
(STSCHG/RI)
1
2
RSVD
RSVD
VR_
PORT
GND
A_CAD20 A_CPAR A_CAD14 A_CC/BE0
//A_A6
//A_CE1
//A_A13
//A_A9
RSVD
GND
SM_EL_WP
MS_BS//
A_CCD2 A_CAD24 A_CREQ A_CVS2
//A_CD2 //A_A2 //A_INPACK //A_VS2
SD_CD
A_CAD6
//A_D13
RSVD
A_CCLK A_CBLOCK A_CAD15 A_CAD8
//A_A16
//A_A19 //A_IOWR //A_D15
A_CAD3 A_CAD0
//A_D3
//A_D5
A_CC/BE2 A_CPERR
//A_A12
//A_A14
MS_CD SM_CD
SD_CMD
A_CAD29
//A_D1
A_CCLKRUN A_CINT//
A_RSVD
//A_A18
A_CAD13 A_CAD11
//A_IORD //A_OE
A_CAD7
//A_D7
A_CAD4
//A_D12
A_CCD1
//A_CD1
RSVD
RSVD
RSVD
RSVD
A_CSERR A_CAD26 A_CAD23 A_CAD21 A_CAD18 A_CIRDY A_CGNT A_CC/BE1 A_CAD12 A_CAD10 A_RSVD
//A_A7
//A_WAIT //A_A0
//A_A11 //A_CE2 //A_D14
//A_A15
//A_WE
//A_A8
//A_A3
//A_A5
A_CAD1
//A_D4
RSVD
RSVD
RSVD
RSVD
RSVD
A_CAD5 A_CAD2
//A_D11
//A_D6
RSVD
RSVD
RSVD
RSVD
15
16
17
18
//A_WP
(IOIS16)
A_CAUDIO
A_CVS1
//A_BVD2
//A_VS1
(SPKR)
A
AVDD
SC_GPIO0
//SM_WE
E
AVDD
TEST0
PAR
MS_CLK//
MS_DATA1 MS_DATA2
//SD_DAT1 //SD_DAT2
//SM_D2
//SM_D1
RSVD
AD12
MS_DATA3//
SD_DAT3
//SM_D3
SM_D4//
AD5
DEVSEL
SM_RE//
SC_GPIO6
AD9
VCC
SC_GPIO1 SC_GPIO5
SD_DAT0//
VR_EN
AD13
MFUNC5
SD_CLK// SD_DAT1//
SC_GPIO4 SC_GPIO3 SC_GPIO2
TRDY
AD20
SC_
PWR_ CLOCK SPKROUT
CTRL
SC_
VCC_
SC_CLK
5V
SC_CD SC_OC
PHYS_WP
AD16
3
A_READY
(IREQ)
A_CC/BE3 A_CAD22 A_CAD19 A_CFRAME
//A_A25
//A_A4
//A_REG
//A_A23
A_CAD25
//A_A1
VCCA
4
5
A_CDEVSEL
//A_A21
A_CRST A_CAD17 A_CTRDY A_CSTOP A_CAD16
//A_A17
//A_RESET //A_A24
//A_A20
//A_A22
6
7
8
9
10
VCCA
A_CAD9
//A_A10
11
12
13
14
19
Figure 2−3. PCI6611 GHK/ZHK-Package Terminal Diagram
2−3
W
AD27
VCCP
C/BE3
IDSEL
AD19
C/BE2
STOP
C/BE1
VCCP
C/BE0
AD4
AD0
RSVD
RSVD
RSVD
NC
RSVD
V
AD30
AD29
AD26
AD24
AD23
AD18
FRAME
PERR
AD15
AD11
AD7
AD3
RSVD
RSVD
RSVD
RSVD
AVDD
RSVD
VDPLL_
33
U
REQ
AD31
AD28
AD25
AD22
AD17
IRDY
SERR
AD14
AD10
AD6
AD2
RSVD
AGND
RSVD
AGND
RSVD
RSVD
RSVD
T
GRST
GNT
RI_OUT
//PME
VSSPLL
VDPLL_
15
RSVD
PHY_
TEST_
MA
RSVD
RSVD
VSSPLL RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
R
MFUNC6 SUSPEND PRST
P
MFUNC2 MFUNC3 MFUNC4
N
DATA
M
CLK_48
SDA
L
RSVD
K
SM_R/B
AD21
PCLK
LATCH MFUNC0
AGND
RSVD
SCL
MFUNC1
VCC
GND
VCC
VCC
RSVD
VCC
RSVD
RSVD
RSVD
RSVD
GND
GND
GND
GND
GND
RSVD
SM_PHYS
RSVD
RSVD
RSVD
VCC
GND
GND
GND
VCC
RSVD
SM_CLE
VCC
GND
GND
GND
VCC
RSVD
VCC
VCC
VCC
VCC
VCC
GND
_WP
CLOCK SPKROUT
SD_DAT1
SM_RE
//SM_D5
H
VR_
PORT
VR_EN
SD_DAT0
//SM_D4
MS_DATA3//
SD_DAT3
//SM_D3
G
MS_SDIO
(DATA0)//
SD_DAT0//
SM_D0
SD_WP//
SM_CE
MS_CLK//
MS_DATA1 MS_DATA2
//SD_DAT1 //SD_DAT2
//SM_D2
//SM_D1
MC_PWR MC_PWR
_CTRL_0 _CTRL_1
GND
SD_CLK//
GND
B_USB_EN A_USB_EN
A_CAD27
//A_D0
A_RSVD
//A_D2
A_CAD28
//A_D8
A_CSTSCHG
//A_BVD1
(STSCHG/RI)
MS_BS//
1
2
RSVD
RSVD
RSVD
GND
A_CCD2 A_CAD24 A_CREQ A_CVS2
//A_A2 //A_INPACK //A_VS2
//A_CD2
SD_CD
A_CAD6
//A_D13
RSVD
A_CCLK A_CBLOCK A_CAD15 A_CAD8
//A_A19 //A_IOWR //A_D15
//A_A16
A_CAD3 A_CAD0
//A_D3
//A_D5
A_CC/BE2 A_CPERR
//A_A12
//A_A14
MS_CD SM_CD
SD_CMD
A_CAD29
//A_D1
A_CCLKRUN A_CINT//
VR_
PORT
A_RSVD
//A_A18
A_CAD13 A_CAD11
//A_IORD //A_OE
A_CAD7
//A_D7
A_CAD4
//A_D12
A_CCD1
//A_CD1
RSVD
RSVD
RSVD
RSVD
A_CSERR A_CAD26 A_CAD23 A_CAD21 A_CAD18 A_CIRDY A_CGNT A_CC/BE1 A_CAD12 A_CAD10 A_RSVD
//A_A7
//A_WAIT //A_A0
//A_A11 //A_CE2 //A_D14
//A_A15
//A_WE
//A_A8
//A_A3
//A_A5
A_CAD1
//A_D4
RSVD
RSVD
RSVD
RSVD
RSVD
A_CAD5 A_CAD2
//A_D11
//A_D6
RSVD
RSVD
RSVD
RSVD
15
16
17
18
//A_WP
(IOIS16)
A_CAUDIO
A_CVS1
//A_BVD2
//A_VS1
(SPKR)
A
A_CAD20 A_CPAR A_CAD14 A_CC/BE0
//A_A6
//A_CE1
//A_A13
//A_A9
AVDD
SM_EL_WP
//SM_WE
B
TEST0
PAR
AD1
SD_CLK//
A_CAD30
//A_D9
AVDD
AD8
SM_ALE
C
RSVD
AD12
SD_CMD//
A_CAD31
//A_D10
AD5
DEVSEL
//SM_D7
D
AD9
VCC
SD_DAT3
E
AD13
MFUNC5
//SM_D6
F
TRDY
AD20
SD_DAT2
J
AD16
3
A_READY
(IREQ)
A_CC/BE3 A_CAD22 A_CAD19 A_CFRAME
//A_A25
//A_A4
//A_REG
//A_A23
A_CAD25
//A_A1
VCCA
4
5
A_CDEVSEL
//A_A21
A_CAD17 A_CTRDY A_CSTOP A_CAD16
A_CRST
//A_A17
//A_RESET //A_A24 //A_A22
//A_A20
6
7
8
9
10
VCCA
A_CAD9
//A_A10
11
12
13
14
19
Figure 2−4. PCI6411 GHK/ZHK-Package Terminal Diagram
Table 2−1 lists the terminal assignments arranged in terminal-number order, with corresponding signal names for
both CardBus and 16-bit PC Cards for the PCI6421 and PCI6621 GHK packages. Table 2−2 and Table 2−3 list the
terminal assignments arranged in alphanumerical order by signal name, with corresponding terminal numbers for the
GHK package; Table 2−2 is for CardBus signal names and Table 2−3 is for 16-bit PC Card signal names.
Terminal E5 on the GHK package is an identification ball used for device orientation.
2−4
Table 2−1. Signal Names by GHK Terminal Number
SIGNAL NAME
SIGNAL NAME
TERMINAL
NUMBER
CardBus PC Card
16-Bit PC Card
TERMINAL
NUMBER
CardBus PC Card
16-Bit PC Card
A02
A_CAUDIO
A_BVD2(SPKR)
C06
A_CAD22
A_A4
A03
A_CVS1
A_VS1
C07
A_CAD19
A_A25
A04
A_CAD25
A_A1
C08
A_CFRAME
A_A23
A05
VCCA
VCCA
C09
A_CDEVSEL
A_A21
A06
A_CRST
A_RESET
C10
A_RSVD
A_A18
A07
A_CAD17
A_A24
C11
A_CAD13
A_IORD
A08
A_CTRDY
A_A22
C12
A_CAD11
A_OE
A09
A_CSTOP
A_A20
C13
A_CAD7
A_D7
A10
A_CAD16
A_A17
C14
A_CAD4
A_D12
A11
VCCA
VCCA
C15
A_CCD1
A_CD1
A12
A_CAD9
A_A10
C16
B_CAD27
B_D0
A13
A_CAD5
A_D6
C17
B_CAUDIO
B_BVD2(SPKR)
A14
A_CAD2
A_D11
C18
B_CVS1
B_VS1
A15
B_RSVD
B_D2
C19
B_CAD25
B_A1
A16
B_CAD30
B_D9
D01
A_CAD31
A_D10
A17
B_CAD28
B_D8
D02
A_RSVD
A_D2
A18
B_CCLKRUN
B_WP(IOIS16)
D03
A_CAD29
A_D1
B01
A_CAD27
A_D0
D17
B_CAD26
B_A0
B02
A_CSTSCHG
A_BVD1(STSCHG/RI)
D18
B_CAD24
B_A2
B03
A_CSERR
A_WAIT
D19
VCCB
VCCB
B04
A_CAD26
A_A0
E01
B_USB_EN
B_USB_EN
B05
A_CAD23
A_A3
E02
A_USB_EN
A_USB_EN
B06
A_CAD21
A_A5
E03
SD_CD
SD_CD
B07
A_CAD18
A_A7
E05
A_CCD2
A_CD2
B08
A_CIRDY
A_A15
E06
A_CAD24
A_A2
B09
A_CGNT
A_WE
E07
A_CREQ
A_INPACK
B10
A_CC/BE1
A_A8
E08
A_CVS2
A_VS2
B11
A_CAD12
A_A11
E09
A_CCLK
A_A16
B12
A_CAD10
A_CE2
E10
A_CBLOCK
A_A19
B13
A_RSVD
A_D14
E11
A_CAD15
A_IOWR
B14
A_CAD1
A_D4
E12
A_CAD8
A_D15
B15
B_CAD31
B_D10
E13
A_CAD3
A_D5
B16
B_CAD29
B_D1
E14
A_CAD0
A_D3
B17
B_CCD2
B_CD2
E17
B_CAD23
B_A3
B18
B_CSERR
B_WAIT
E18
B_CREQ
B_INPACK
B19
B_CINT
B_READY(IREQ)
E19
B_CAD22
B_A4
C01
A_CAD30
A_D9
F01
MC_PWR_CTRL_0
MC_PWR_CTRL_0
C02
A_CAD28
A_D8
F02
MC_PWR_CTRL_1
MC_PWR_CTRL_1
C03
A_CCLKRUN
A_WP(IOIS16)
F03
MS_BS
//SD_CMD
//SM_WE
MS_BS
//SD_CMD
//SM_WE
C04
A_CINT
A_READY(IREQ)
F05
MC_CD
MC_CD
C05
A_CC/BE3
A_REG
F06
SM_CD
SM_CD
2−5
Table 2−1. Signal Names by GHK Terminal Number (Continued)
2−6
SIGNAL NAME
SIGNAL NAME
TERMINAL
NUMBER
CardBus PC Card
16-Bit PC Card
TERMINAL
NUMBER
F09
A_CC/BE2
A_A12
H09
F10
A_CPERR
A_A14
H10
F12
A_CAD6
A_D13
H11
F14
B_CSTSCHG
B_BVD1(STSCHG/RI)
H12
F15
B_CC/BE3
B_REG
H13
GND
GND
F17
B_CRST
B_RESET
H14
B_CAD19
B_A25
F18
B_CAD20
B_A6
H15
B_CAD18
B_A7
CardBus PC Card
16-Bit PC Card
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
F19
B_CVS2
B_VS2
H17
B_CTRDY
B_A22
G01
MS_SDIO(DATA0)
//SD_DAT0
//SM_D0
MS_SDIO(DATA0)
//SD_DAT0
//SM_D0
H18
B_CCLK
B_A16
G02
MS_DATA1
//SD_DAT1
//SM_D1
MS_DATA1
//SD_DAT1
//SM_D1
H19
B_CDEVSEL
B_A21
G03
MS_DATA2
//SD_DAT2
//SM_D2
MS_DATA2
//SD_DAT2
//SM_D2
J01
SD_DAT2
//SM_D6
//SC_GPIO4
SD_DAT2
//SM_D6
//SC_GPIO4
G05
MS_CLK
//SD_CLK
//SM_EL_WP
MS_CLK
//SD_CLK
//SM_EL_WP
J02
SD_DAT3
//SM_D7
//SC_GPIO3
SD_DAT3
//SM_D7
//SC_GPIO3
G07
GND
GND
J03
SD_CMD
//SM_ALE
//SC_GPIO2
SD_CMD
//SM_ALE
//SC_GPIO2
G08
GND
GND
J05
SD_CLK
//SM_RE
//SC_GPIO1
SD_CLK
//SM_RE
//SC_GPIO1
G09
A_CAD20
A_A6
J06
SD_DAT1
//SM_D5
//SC_GPIO5
SD_DAT1
//SM_D5
//SC_GPIO5
G10
A_CPAR
A_A13
J07
SM_CLE
//SC_GPIO0
SM_CLE
//SC_GPIO0
G11
A_CAD14
A_A9
J08
G12
A_CC/BE0
A_CE1
J09
VCC
GND
VCC
GND
G13
GND
GND
J10
GND
GND
G15
B_CAD21
B_A5
J11
GND
GND
G17
B_CAD17
B_A24
J12
G18
B_CC/BE2
B_A12
J13
VCC
B_CIRDY
VCC
B_A15
G19
B_CFRAME
B_A23
J15
B_CGNT
B_WE
H01
VR_PORT
VR_PORT
J17
B_CSTOP
B_A20
H02
VR_EN
VR_EN
J18
B_CPERR
B_A14
H03
SD_DAT0
//SM_D4
//SC_GPIO6
SD_DAT0
//SM_D4
//SC_GPIO6
J19
B_CBLOCK
B_A19
H05
MS_DATA3
//SD_DAT3
//SM_D3
MS_DATA3
//SD_DAT3
//SM_D3
K01
SM_R/B
//SC_RFU
SM_R/B
//SC_RFU
H07
SD_WP
//SM_CE
SD_WP
//SM_CE
K02
SM_PHYS_WP
//SC_FCB
SM_PHYS_WP
//SC_FCB
H08
VCC
VCC
K03
SC_RST
SC_RST
Table 2−1. Signal Names by GHK Terminal Number (Continued)
TERMINAL
NUMBER
SIGNAL NAME
CardBus PC Card
SIGNAL NAME
16-Bit PC Card
TERMINAL
NUMBER
CardBus PC Card
16-Bit PC Card
K05
SC_CLK
SC_CLK
M18
B_CC/BE0
B_CE1
K07
SC_VCC_5V
SC_VCC_5V
M19
VR_PORT
VR_PORT
K08
VCC
GND
N01
DATA
DATA
K09
VCC
GND
N02
LATCH
LATCH
K10
GND
GND
N03
MFUNC0
MFUNC0
K11
GND
GND
N05
MFUNC5
MFUNC5
K12
VCC
B_A13
N07
K13
VCC
B_CPAR
N08
VCC
DEVSEL
VCC
DEVSEL
K14
B_CC/BE1
B_A8
N09
AD12
AD12
K15
B_RSVD
B_A18
N10
AD8
AD8
K17
B_CAD16
B_A17
N11
AD1
AD1
K18
B_CAD14
B_A9
N12
AGND
AGND
K19
VCCB
SC_DATA
N13
B_CCD1
B_CD1
L01
VCCB
SC_DATA
N15
B_CAD4
B_D12
L02
SC_CD
SC_CD
N17
B_RSVD
B_D14
L03
SC_OC
SC_OC
N18
B_CAD5
B_D6
L05
SC_PWR_CTRL
SC_PWR_CTRL
N19
B_CAD6
B_D13
L06
CLOCK
CLOCK
P01
MFUNC2
MFUNC2
L07
SPKROUT
SPKROUT
P02
MFUNC3
MFUNC3
L08
GND
GND
P03
MFUNC4
MFUNC4
L09
GND
GND
P05
PCLK
PCLK
L10
GND
GND
P06
AD20
AD20
L11
GND
GND
P09
PAR
PAR
L12
GND
GND
P12
TEST0
TEST0
L13
B_CAD15
B_IOWR
P14
VSSPLL
VSSPLL
L15
B_CAD13
B_IORD
P15
RSVD
RSVD
L17
B_CAD12
B_A11
P17
B_CAD1
B_D4
L18
B_CAD11
B_OE
P18
B_CAD2
B_D11
L19
B_CAD10
B_CE2
P19
B_CAD0
B_D3
M01
CLK_48
CLK_48
R01
MFUNC6
MFUNC6
M02
SDA
SDA
R02
SUSPEND
SUSPEND
M03
SCL
SCL
R03
PRST
PRST
M05
MFUNC1
MFUNC1
R06
AD21
AD21
M07
VCC
GND
VCC
GND
R07
AD16
AD16
R08
TRDY
TRDY
VCC
VCC
R09
AD13
AD13
M10
VCC
VCC
R10
AD9
AD9
M11
RSVD
RSVD
R11
AD5
AD5
M12
VCC
B_D5
R12
RSVD
RSVD
M13
VCC
B_CAD3
R13
AVDD
AVDD
M14
B_CAD8
B_D15
R14
AVDD
AVDD
M15
B_CAD7
B_D7
R17
PHY_TEST_MA
PHY_TEST_MA
M17
B_CAD9
B_A10
R18
RSVD
RSVD
M08
M09
2−7
Table 2−1. Signal Names by GHK Terminal Number (Continued)
2−8
SIGNAL NAME
TERMINAL
NUMBER
CardBus PC Card
R19
RSVD
T01
T02
T03
SIGNAL NAME
16-Bit PC Card
TERMINAL
NUMBER
CardBus PC Card
16-Bit PC Card
RSVD
V06
AD18
AD18
GRST
GRST
V07
FRAME
FRAME
GNT
GNT
V08
PERR
PERR
RI_OUT/PME
RI_OUT/PME
V09
AD15
AD15
T17
VSSPLL
VSSPLL
V10
AD11
AD11
T18
VDPLL_15
VDPLL_15
V11
AD7
AD7
T19
RSVD
RSVD
V12
AD3
AD3
U01
REQ
REQ
V13
RSVD
RSVD
U02
AD31
AD31
V14
RSVD
RSVD
U03
AD28
AD28
V15
RSVD
RSVD
U04
AD25
AD25
V16
RSVD
RSVD
U05
AD22
AD22
V17
AVDD
AVDD
U06
AD17
AD17
V18
RSVD
RSVD
U07
IRDY
IRDY
V19
VDPLL_33
VDPLL_33
U08
SERR
SERR
W02
AD27
AD27
U09
AD14
AD14
W03
U10
AD10
AD10
W04
VCCP
C/BE3
VCCP
C/BE3
U11
AD6
AD6
W05
IDSEL
IDSEL
U12
AD2
AD2
W06
AD19
AD19
C/BE2
U13
RSVD
RSVD
W07
C/BE2
U14
AGND
AGND
W08
STOP
STOP
U15
RSVD
RSVD
W09
C/BE1
C/BE1
U16
AGND
AGND
W10
U17
RSVD
RSVD
W11
VCCP
C/BE0
VCCP
C/BE0
U18
RSVD
RSVD
W12
AD4
AD4
U19
RSVD
RSVD
W13
AD0
AD0
V01
AD30
AD30
W14
RSVD
RSVD
V02
AD29
AD29
W15
RSVD
RSVD
V03
AD26
AD26
W16
RSVD
RSVD
V04
AD24
AD24
W17
NC
NC
V05
AD23
AD23
W18
RSVD
RSVD
Table 2−2. CardBus PC Card Signal Names Sorted Alphabetically
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
AD0
W13
A_CAD5
A13
A_CPERR
F10
B_CAD30
A16
AD1
N11
A_CAD6
F12
A_CREQ
E07
B_CAD31
B15
AD2
U12
A_CAD7
C13
A_CRST
A06
B_CAUDIO
C17
AD3
V12
A_CAD8
E12
A_CSERR
B03
B_CBLOCK
J19
AD4
W12
A_CAD9
A12
A_CSTOP
A09
B_CC/BE0
M18
AD5
R11
A_CAD10
B12
A_CSTSCHG
B02
B_CC/BE1
K14
AD6
U11
A_CAD11
C12
A_CTRDY
A08
B_CC/BE2
G18
AD7
V11
A_CAD12
B11
A_CVS1
A03
B_CC/BE3
F15
AD8
N10
A_CAD13
C11
A_CVS2
E08
B_CCD1
N13
AD9
R10
A_CAD14
G11
A_RSVD
B13
B_CCD2
B17
AD10
U10
A_CAD15
E11
A_RSVD
C10
B_CCLK
H18
AD11
V10
A_CAD16
A10
A_RSVD
D02
B_CCLKRUN
A18
AD12
N09
A_CAD17
A07
A_USB_EN
E02
B_CDEVSEL
H19
AD13
R09
A_CAD18
B07
B_CAD0
P19
B_CFRAME
G19
AD14
U09
A_CAD19
C07
B_CAD1
P17
B_CGNT
J15
AD15
V09
A_CAD20
G09
B_CAD2
P18
B_CINT
B19
AD16
R07
A_CAD21
B06
B_CAD3
M13
B_CIRDY
J13
AD17
U06
A_CAD22
C06
B_CAD4
N15
B_CPAR
K13
AD18
V06
A_CAD23
B05
B_CAD5
N18
B_CPERR
J18
AD19
W06
A_CAD24
E06
B_CAD6
N19
B_CREQ
E18
AD20
P06
A_CAD25
A04
B_CAD7
M15
B_CRST
F17
AD21
R06
A_CAD26
B04
B_CAD8
M14
B_CSERR
B18
AD22
U05
A_CAD27
B01
B_CAD9
M17
B_CSTOP
J17
AD23
V05
A_CAD28
C02
B_CAD10
L19
B_CSTSCHG
F14
AD24
V04
A_CAD29
D03
B_CAD11
L18
B_CTRDY
H17
AD25
U04
A_CAD30
C01
B_CAD12
L17
B_CVS1
C18
AD26
V03
A_CAD31
D01
B_CAD13
L15
B_CVS2
F19
AD27
W02
A_CAUDIO
A02
B_CAD14
K18
B_RSVD
A15
AD28
U03
A_CBLOCK
E10
B_CAD15
L13
B_RSVD
K15
AD29
V02
A_CC/BE0
G12
B_CAD16
K17
B_RSVD
N17
AD30
V01
A_CC/BE1
B10
B_CAD17
G17
B_USB_EN
E01
AD31
U02
A_CC/BE2
F09
B_CAD18
H15
C/BE0
W11
AGND
N12
A_CC/BE3
C05
B_CAD19
H14
C/BE1
W09
AGND
U14
A_CCD1
C15
B_CAD20
F18
C/BE2
W07
AGND
U16
A_CCD2
E05
B_CAD21
G15
C/BE3
W04
AVDD
R13
A_CCLK
E09
B_CAD22
E19
CLK_48
M01
AVDD
R14
A_CCLKRUN
C03
B_CAD23
E17
CLOCK
L06
AVDD
V17
A_CDEVSEL
C09
B_CAD24
D18
DATA
N01
A_CAD0
E14
A_CFRAME
C08
B_CAD25
C19
DEVSEL
N08
A_CAD1
B14
A_CGNT
B09
B_CAD26
D17
FRAME
V07
A_CAD2
A14
A_CINT
C04
B_CAD27
C16
GND
G07
A_CAD3
E13
A_CIRDY
B08
B_CAD28
A17
GND
G08
A_CAD4
C14
A_CPAR
G10
B_CAD29
B16
GND
G13
2−9
Table 2−2. CardBus PC Card Signal Names Sorted Alphabetically (Continued)
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
GND
H13
PCLK
P05
SC_GPIO5
J06
SM_PHYS_WP
K02
GND
J09
PERR
V08
SC_GPIO6
H03
SM_R/B
K01
GND
J10
PHY_TEST_MA
R17
SC_OC
L03
SM_RE
J05
GND
J11
PRST
R03
SC_PWR_CTRL
L05
SM_WE
F03
GND
K09
REQ
U01
SC_RFU
K01
SPKROUT
L07
GND
K10
RI_OUT/PME
T03
SC_RST
K03
STOP
W08
GND
K11
RSVD
M11
SC_VCC_5V
K07
SUSPEND
R02
GND
L08
RSVD
P15
SDA
M02
TEST0
P12
GND
L09
RSVD
R12
SD_CD
E03
TRDY
R08
GND
L10
RSVD
R18
SD_CLK
G05
L11
RSVD
R19
SD_CLK
J05
VCC
VCC
H08
GND
GND
L12
RSVD
T19
SD_CMD
F03
M08
RSVD
U13
SD_CMD
J03
VCC
VCC
H10
GND
GNT
T02
RSVD
U15
SD_DAT0
G01
VCC
VCC
H12
GRST
T01
RSVD
U17
SD_DAT0
H03
IDSEL
W05
RSVD
U18
SD_DAT1
G02
IRDY
U07
RSVD
U19
SD_DAT1
J06
LATCH
N02
RSVD
V13
SD_DAT2
G03
MC_PWR_CTRL_0
F01
RSVD
V14
SD_DAT2
J01
MC_PWR_CTRL_1
F02
RSVD
V15
SD_DAT3
H05
MFUNC0
N03
RSVD
V16
SD_DAT3
J02
MFUNC1
M05
RSVD
V18
SD_WP
H07
MFUNC2
P01
RSVD
W14
SERR
U08
MFUNC3
P02
RSVD
W15
SM_ALE
J03
MFUNC4
P03
RSVD
W16
SM_CD
F06
MFUNC6
R01
RSVD
W18
SM_CE
H07
MFUNC5
N05
SCA
M03
SM_CLE
J07
H09
H11
J08
VCC
VCC
K08
J12
VCC
VCC
M07
K12
VCC
VCC
M09
VCC
VCC
M12
VCCA
VCCA
A05
VCCB
VCCB
D19
W03
MS_BS
F03
SC_CD
L02
SM_D0
G01
MS_CD
F05
SC_CLK
K05
SM_D1
G02
VCCP
VCCP
M10
N07
A11
K19
W10
MS_CLK
G05
SC_DATA
L01
SM_D2
G03
VDPLL_15
T18
MS_DATA1
G02
SC_FCB
K02
SM_D3
H05
VDPLL_33
V19
MS_DATA2
G03
SC_GPIO0
J07
SM_D4
H03
VR_EN
H02
MS_DATA3
H05
SC_GPIO1
J05
SM_D5
J06
VR_PORT
H01
MS_SDIO(DATA0)
G01
SC_GPIO2
J03
SM_D6
J01
VR_PORT
M19
NC
W17
SC_GPIO3
J02
SM_D7
J02
VSSPLL
P14
PAR
P09
SC_GPIO4
J01
SM_EL_WP
G05
VSSPLL
T17
2−10
Table 2−3. 16-Bit PC Card Signal Names Sorted Alphabetically
SIGNAL
NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
AD0
W13
A_A5
B06
A_INPACK
E07
B_CE1
M18
AD1
N11
A_A6
G09
A_IORD
C11
B_CE2
L19
AD2
U12
A_A7
B07
A_IOWR
E11
B_D0
C16
AD3
V12
A_A8
B10
A_OE
C12
B_D1
B16
AD4
W12
A_A9
G11
A_READY(IREQ)
C04
B_D2
A15
AD5
R11
A_A10
A12
A_REG
C05
B_D3
P19
AD6
U11
A_A11
B11
A_RESET
A06
B_D4
P17
AD7
V11
A_A12
F09
A_USB_EN
E02
B_D5
M13
AD8
N10
A_A13
G10
A_VS1
A03
B_D6
N18
AD9
R10
A_A14
F10
A_VS2
E08
B_D7
M15
AD10
U10
A_A15
B08
A_WAIT
B03
B_D8
A17
AD11
V10
A_A16
E09
A_WE
B09
B_D9
A16
AD12
N09
A_A17
A10
A_WP(IOIS16)
C03
B_D10
B15
AD13
R09
A_A18
C10
B_A0
D17
B_D11
P18
AD14
U09
A_A19
E10
B_A1
C19
B_D12
N15
AD15
V09
A_A20
A09
B_A2
D18
B_D13
N19
AD16
R07
A_A21
C09
B_A3
E17
B_D14
N17
AD17
U06
A_A22
A08
B_A4
E19
B_D15
M14
AD18
V06
A_A23
C08
B_A5
G15
B_INPACK
E18
AD19
W06
A_A24
A07
B_A6
F18
B_IORD
L15
AD20
P06
A_A25
C07
B_A7
H15
B_IOWR
L13
AD21
R06
A_BVD1(STSCHG/RI)
B02
B_A8
K14
B_OE
L18
AD22
U05
A_BVD2(SPKR)
A02
B_A9
K18
B_READY(IREQ)
B19
AD23
V05
A_CD1
C15
B_A10
M17
B_REG
F15
AD24
V04
A_CD2
E05
B_A11
L17
B_RESET
F17
AD25
U04
A_CE1
G12
B_A12
G18
B_USB_EN
E01
AD26
V03
A_CE2
B12
B_A13
K13
B_VS1
C18
AD27
W02
A_D0
B01
B_A14
J18
B_VS2
F19
AD28
U03
A_D1
D03
B_A15
J13
B_WAIT
B18
AD29
V02
A_D2
D02
B_A16
H18
B_WE
J15
AD30
V01
A_D3
E14
B_A17
K17
B_WP(IOIS16)
A18
AD31
U02
A_D4
B14
B_A18
K15
C/BE0
W11
AGND
N12
A_D5
E13
B_A19
J19
C/BE1
W09
AGND
U14
A_D6
A13
B_A20
J17
C/BE2
W07
AGND
U16
A_D7
C13
B_A21
H19
C/BE3
W04
AVDD
R13
A_D8
C02
B_A22
H17
CLK_48
M01
AVDD
R14
A_D9
C01
B_A23
G19
CLOCK
L06
AVDD
V17
A_D10
D01
B_A24
G17
DATA
N01
A_A0
B04
A_D11
A14
B_A25
H14
DEVSEL
N08
A_A1
A04
A_D12
C14
B_BVD1(STSCHG/RI)
F14
FRAME
V07
A_A2
E06
A_D13
F12
B_BVD2(SPKR)
C17
GND
G07
A_A3
B05
A_D14
B13
B_CD1
N13
GND
G08
A_A4
C06
A_D15
E12
B_CD2
B17
GND
G13
2−11
Table 2−3. 16-Bit PC Card Signal Names Sorted Alphabetically (Continued)
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
SIGNAL NAME
TERMINAL
NUMBER
GND
H13
PCLK
P05
SC_GPIO5
J06
SM_PHYS_WP
K02
GND
J09
PERR
V08
SC_GPIO6
H03
SM_R/B
K01
GND
J10
PHY_TEST_MA
R17
SC_OC
L03
SM_RE
J05
GND
J11
PRST
R03
SC_PWR_CTRL
L05
SM_WE
F03
GND
K09
REQ
U01
SC_RFU
K01
SPKROUT
L07
GND
K10
RI_OUT/PME
T03
SC_RST
K03
STOP
W08
GND
K11
RSVD
M11
SC_VCC_5V
K07
SUSPEND
R02
GND
L08
RSVD
P15
SDA
M02
TEST0
P12
GND
L09
RSVD
R12
SD_CD
E03
TRDY
R08
GND
L10
RSVD
R18
SD_CLK
G05
L11
RSVD
R19
SD_CLK
J05
VCC
VCC
H08
GND
GND
L12
RSVD
T19
SD_CMD
F03
M08
RSVD
U13
SD_CMD
J03
VCC
VCC
H10
GND
GNT
T02
RSVD
U15
SD_DAT0
G01
VCC
VCC
H12
GRST
T01
RSVD
U17
SD_DAT0
H03
IDSEL
W05
RSVD
U18
SD_DAT1
G02
IRDY
U07
RSVD
U19
SD_DAT1
J06
LATCH
N02
RSVD
V13
SD_DAT2
G03
MC_PWR_CTRL_0
F01
RSVD
V14
SD_DAT2
J01
MC_PWR_CTRL_1
F02
RSVD
V15
SD_DAT3
H05
MFUNC0
N03
RSVD
V16
SD_DAT3
J02
MFUNC1
M05
RSVD
V18
SD_WP
H07
MFUNC2
P01
RSVD
W14
SERR
U08
MFUNC3
P02
RSVD
W15
SM_ALE
J03
MFUNC4
P03
RSVD
W16
SM_CD
F06
MFUNC6
R01
RSVD
W18
SM_CE
H07
MFUNC5
N05
SCA
M03
SM_CLE
J07
H09
H11
J08
VCC
VCC
K08
J12
VCC
VCC
M07
K12
VCC
VCC
M09
VCC
VCC
M12
VCCA
VCCA
A05
VCCB
VCCB
D19
W03
MS_BS
F03
SC_CD
L02
SM_D0
G01
MS_CD
F05
SC_CLK
K05
SM_D1
G02
VCCP
VCCP
M10
N07
A11
K19
W10
MS_CLK
G05
SC_DATA
L01
SM_D2
G03
VDPLL_15
T18
MS_DATA1
G02
SC_FCB
K02
SM_D3
H05
VDPLL_33
V19
MS_DATA2
G03
SC_GPIO0
J07
SM_D4
H03
VR_EN
H02
MS_DATA3
H05
SC_GPIO1
J05
SM_D5
J06
VR_PORT
H01
MS_SDIO(DATA0)
G01
SC_GPIO2
J03
SM_D6
J01
VR_PORT
M19
NC
W17
SC_GPIO3
J02
SM_D7
J02
VSSPLL
P14
PAR
P09
SC_GPIO4
J01
SM_EL_WP
G05
VSSPLL
T17
2−12
2.1 Detailed Terminal Descriptions
Please see Table 2−4 through Table 2−19 for more detailed terminal descriptions. The following list defines the
column headings and the abbreviations used in the detailed terminal description tables.
•
•
•
I/O Type:
−
I = Digital input
−
O = Digital output
−
I/O = Digital input/output
−
AI = Analog input
−
PWR = Power
−
GND = Ground
Input/Output Description:
−
AF = Analog feedthrough
−
TTLI1 = 5-V tolerant TTL input buffer
−
TTLI2 = 5-V tolerant TTL input buffer with hysteresis
−
TTLO1 = 5-V tolerant low-noise 4-mA TTL output buffer
−
PCII1 = 5-V tolerant PCI input buffer
−
PCII2 = 5-V tolerant PCI input buffer
−
PCII3 = 5-V tolerant PCI input buffer
−
PCII4 = 5-V tolerant PCI input buffer
−
PCII5 = 5-V tolerant PCI input buffer
−
PCIO2 = 5-V tolerant PCI output buffer
−
PCIO4 = 5-V tolerant PCI output buffer
−
PCIO5 = 5-V tolerant PCI output buffer
−
LVCI1 = LVCMOS input buffer
−
LVCO1 = Low-noise 4-mA LVCMOS open drain output buffer
−
LVCO2 = Low-noise 4-mA LVCMOS open drain output buffer
−
LVCO3 = Low-noise 8-mA LVCMOS open drain output buffer
PU/PD signifies whether the terminal has an internal pullup or pulldown resistor. These pullups are disabled
and enabled by design when appropriate to preserve power.
−
PD1 = 20-µA failsafe pulldown
−
PD2 = 100-µA failsafe pulldown
−
PU1 = 200-µA pullup
−
PU2 = 100-µA pullup
−
PU3 = 100-µA pullup
−
PU4 = 100-µA pullup
−
SW = Switchable 50-µA pullup/200-µA pulldown implemented depending on situation
•
Power Rail signifies which rail the terminal is clamped to for protection.
•
External Components signifies any external components needed for normal operation.
•
Pin Strapping (If Unused) signifies how the terminal must be implemented if its function is not needed.
The terminals are grouped in tables by functionality, such as PCI system function, power-supply function, etc. The
terminal numbers are also listed for convenient reference.
2−13
Table 2−4. Power Supply Terminals
Output description, internal pullup/pulldown resistors, and the power rail designation are not applicable for the power
supply terminals.
TERMINAL
NAME
DESCRIPTION
NUMBER
I/O
TYPE
INPUT
EXTERNAL
COMPONENTS
PIN STRAPPING
(IF UNUSED)
N12, U14,
U16
Analog circuit ground terminals
GND
AVDD
R13, R14,
V17
Analog circuit power terminals. A parallel combination of high
frequency decoupling capacitors near each terminal is suggested,
such as 0.1 µF and 0.001 µF. Lower frequency 10-µF filtering
capacitors are also recommended. These supply terminals are
separated from VDPLL_33 internal to the controller to provide
noise isolation. They must be tied to a low-impedance point on the
circuit board.
GND
GND
G07, G08,
G13, H13,
J09, J10,
J11, K09,
K10, K11,
L08, L09,
L10, L11,
L12, M08
Digital ground terminal
GND
NA
VCC
H08, H09,
H10, H11,
H12, J08,
J12, K08,
K12, M07,
M09, M10,
M12, N07
Power supply terminal for I/O and internal voltage regulator
PWR
NA
AGND
NA
0.1-µF, 0.001-µF,
and 10-µF
capacitors tied to
AGND
NA
VCCA
A05, A11
Clamp voltage for PC Card A interface. Matches card A signaling
environment, 5 V or 3.3 V
PWR
Float
VCCB
D19, K19
Clamp voltage for PC Card B interface. Matches card B signaling
environment, 5 V or 3.3 V
PWR
Float
VCCP
W03, W10
Clamp voltage for PCI and miscellaneous I/O, 5 V or 3.3 V
PWR
NA
T18
1.5-V PLL circuit power terminal. An external capacitor (0.1 µF
recommended) must be placed between terminals T18 and T17
(VSSPLL) when the internal voltage regulator is enabled
(VR_EN = 0 V). When the internal voltage regulator is disabled,
1.5-V must be supplied to this terminal and a parallel combination
of high frequency decoupling capacitors near the terminal is
suggested, such as 0.1 µF and 0.001 µF. Lower frequency 10-µF
filtering capacitors are also recommended.
VDPLL_33
V19
3.3-V PLL circuit power terminal. A parallel combination of high
frequency decoupling capacitors near the terminal is suggested,
such as 0.1 µF and 0.001 µF. Lower frequency 10-µF filtering
capacitors are also recommended. This supply terminal is
separated from AVDD internal to the controller to provide noise
isolation. It must be tied to a low-impedance point on the circuit
board. When the internal voltage regulator is disabled
(VR_EN = 3.3 V), no voltage is required to be supplied to this
terminal.
VR_EN
H02
Internal voltage regulator enable. Active low
VDPLL_15
PWR
FT
VR_PORT
H01, M19
1.5-V output from the internal voltage regulator
PWR
VSSPLL
P14, T17
PLL circuit ground terminal. This terminal must be tied to the
low-impedance circuit board ground plane.
GND
2−14
FT
0.1-µF, 0.001-µF,
and 10-µF
capacitors tied to
VSPLL
NA
0.1-µF, 0.001-µF,
and 10-µF
capacitors tied to
VSPLL
NA
Pulled directly to
GND
NA
0.1-µF capacitor
tied to GND
NA
NA
Table 2−5. PC Card Power Switch Terminals
Internal pullup/pulldown resistors, power rail designation, and pin strapping are not applicable for the power switch
terminals.
TERMINAL
NAME
NO.
DESCRIPTION
I/O
TYPE
INPUT
OUTPUT
EXTERNAL
COMPONENTS
TTLI1
TTLO1
PCMCIA power
switch
CLOCK
L06
Power switch clock. Information on the DATA line is sampled at the rising edge of
CLOCK. CLOCK defaults to an input, but can be changed to an output by using bit 27
(P2CCLK) in the system control register (offset 80h, see Section 4.29).
I/O
DATA
N01
Power switch data. DATA is used to communicate socket power control information
serially to the power switch.
O
LVCO1
PCMCIA power
switch
LATCH
N02
Power switch latch. LATCH is asserted by the controller to indicate to the power
switch that the data on the DATA line is valid.
O
LVCO1
PCMCIA power
switch
Table 2−6. PCI System Terminals
Internal pullup/pulldown resistors and pin strapping are not applicable for the PCI terminals.
TERMINAL
NAME
NO.
DESCRIPTION
I/O
TYPE
INPUT
I
LVCI2
POWER
RAIL
GRST
T01
Global reset. When the global reset is asserted, the GRST signal causes the
controller to place all output buffers in a high-impedance state and reset all internal
registers. When GRST is asserted, the controller is completely in its default state. For
systems that require wake-up from D3, GRST is normally asserted only during initial
boot. PRST must be asserted following initial boot so that PME context is retained
when transitioning from D3 to D0. For systems that do not require wake-up from D3,
GRST must be tied to PRST. When the SUSPEND mode is enabled, the controller is
protected from the GRST, and the internal registers are preserved. All outputs are
placed in a high-impedance state, but the contents of the registers are preserved.
PCLK
P05
PCI bus clock. PCLK provides timing for all transactions on the PCI bus. All PCI
signals are sampled at the rising edge of PCLK.
I
PCII3
VCCP
R03
PCI bus reset. When the PCI bus reset is asserted, PRST causes the controller to
place all output buffers in a high-impedance state and reset some internal registers.
When PRST is asserted, the controller is completely nonfunctional. After PRST is
deasserted, the controller is in a default state.
When SUSPEND and PRST are asserted, the controller is protected from PRST
clearing the internal registers. All outputs are placed in a high-impedance state, but
the contents of the registers are preserved.
I
PCII3
VCCP
PRST
EXTERNAL
COMPONENTS
Power-on reset or
tied to PRST
2−15
Table 2−7. PCI Address and Data Terminals
Internal pullup/pulldown resistors and pin strapping are not applicable for the PCI address and data terminals.
TERMINAL
NAME
NO.
AD31
U02
AD30
V01
AD29
V02
AD28
U03
AD27
W02
AD26
V03
AD25
U04
AD24
V04
AD23
V05
AD22
U05
AD21
R06
AD20
P06
AD19
W06
AD18
V06
AD17
U06
AD16
R07
AD15
V09
AD14
U09
AD13
R09
AD12
N09
AD11
V10
AD10
U10
AD9
R10
AD8
N10
AD7
V11
AD6
U11
AD5
R11
AD4
W12
AD3
V12
AD2
U12
AD1
N11
AD0
W13
C/BE3
W04
C/BE2
W07
C/BE1
W09
C/BE0
W11
PAR
2−16
P09
DESCRIPTION
I/O
TYPE
PCI address/data bus. These signals make up the multiplexed PCI address and data bus on the
primary interface. During the address phase of a primary-bus PCI cycle, AD31−AD0 contain a
32-bit address or other destination information. During the data phase, AD31−AD0 contain data.
POWER
RAIL
INPUT
OUTPUT
I/O
PCII3
PCIO3
VCCP
PCI-bus commands and byte enables. These signals are multiplexed on the same PCI
terminals. During the address phase of a primary-bus PCI cycle, C/BE3−C/BE0 define the bus
command. During the data phase, this 4-bit bus is used as byte enables. The byte enables
determine which byte paths of the full 32-bit data bus carry meaningful data. C/BE0 applies to
byte 0 (AD7−AD0), C/BE1 applies to byte 1 (AD15−AD8), C/BE2 applies to byte 2
(AD23−AD16), and C/BE3 applies to byte 3 (AD31−AD24).
I/O
PCII3
PCIO3
VCCP
PCI-bus parity. In all PCI-bus read and write cycles, the controller calculates even parity across
the AD31−AD0 and C/BE3−C/BE0 buses. As an initiator during PCI cycles, the controller
outputs this parity indicator with a one-PCLK delay. As a target during PCI cycles, the controller
compares its calculated parity to the parity indicator of the initiator. A compare error results in
the assertion of a parity error (PERR).
I/O
PCII3
PCIO3
VCCP
Table 2−8. PCI Interface Control Terminals
Internal pullup/pulldown resistors and pin strapping are not applicable for the PCI interface control terminals.
TERMINAL
DESCRIPTION
I/O
TYPE
N08
PCI device select. The controller asserts DEVSEL to claim a PCI cycle
as the target device. As a PCI initiator on the bus, the controller monitors
DEVSEL until a target responds. If no target responds before timeout
occurs, then the controller terminates the cycle with an initiator abort.
FRAME
V07
GNT
IDSEL
POWER
RAIL
EXTERNAL
COMPONENTS
INPUT
OUTPUT
I/O
PCII3
PCIO3
VCCP
Pullup resistor per
PCI specification
PCI cycle frame. FRAME is driven by the initiator of a bus cycle. FRAME
is asserted to indicate that a bus transaction is beginning, and data
transfers continue while this signal is asserted. When FRAME is
deasserted, the PCI bus transaction is in the final data phase.
I/O
PCII3
PCIO3
VCCP
Pullup resistor per
PCI specification
T02
PCI bus grant. GNT is driven by the PCI bus arbiter to grant the
controller access to the PCI bus after the current data transaction has
completed. GNT may or may not follow a PCI bus request, depending on
the PCI bus parking algorithm.
I
PCII3
VCCP
W05
Initialization device select. IDSEL selects the controller during
configuration space accesses. IDSEL can be connected to one of the
upper 24 PCI address lines on the PCI bus.
I
PCII3
VCCP
IRDY
U07
PCI initiator ready. IRDY indicates the ability of the PCI bus initiator to
complete the current data phase of the transaction. A data phase is
completed on a rising edge of PCLK where both IRDY and TRDY are
asserted. Until IRDY and TRDY are both sampled asserted, wait states
are inserted.
I/O
PCII3
PCIO3
VCCP
Pullup resistor per
PCI specification
PERR
V08
PCI parity error indicator. PERR is driven by a PCI controller to indicate
that calculated parity does not match PAR when PERR is enabled
through bit 6 of the command register (PCI offset 04h, see Section 4.4).
I/O
PCII3
PCIO3
VCCP
Pullup resistor per
PCI specification
REQ
U01
PCI bus request. REQ is asserted by the controller to request access to
the PCI bus as an initiator.
O
PCIO3
VCCP
U08
PCI system error. SERR is an output that is pulsed from the controller
when enabled through bit 8 of the command register (PCI offset 04h,
see Section 4.4) indicating a system error has occurred. The controller
need not be the target of the PCI cycle to assert this signal. When SERR
is enabled in the command register, this signal also pulses, indicating
that an address parity error has occurred on a CardBus interface.
O
PCIO3
VCCP
Pullup resistor per
PCI specification
W08
PCI cycle stop signal. STOP is driven by a PCI target to request the
initiator to stop the current PCI bus transaction. STOP is used for target
disconnects and is commonly asserted by target devices that do not
support burst data transfers.
I/O
PCII3
PCIO3
VCCP
Pullup resistor per
PCI specification
R08
PCI target ready. TRDY indicates the ability of the primary bus target to
complete the current data phase of the transaction. A data phase is
completed on a rising edge of PCLK when both IRDY and TRDY are
asserted. Until both IRDY and TRDY are asserted, wait states are
inserted.
I/O
PCII3
PCIO3
VCCP
Pullup resistor per
PCI specification
NAME
NO.
DEVSEL
SERR
STOP
TRDY
2−17
Table 2−9. Multifunction and Miscellaneous Terminals
The power rail designation is not applicable for the multifunction and miscellaneous terminals.
TERMINAL
NAME
NO.
DESCRIPTION
I/O
TYPE
INPUT
OUTPUT
PU/
PD
EXTERNAL
COMPONENTS
PIN STRAPPING
(IF UNUSED)
A_USB_EN
B_USB_EN
E02
E01
USB enable. These output terminals control an
external CBT switch for each socket when an USB
card is inserted into the socket.
O
CLK_48
M01
A 48-MHz clock must be connected to this terminal.
I
LVCI1
MFUNC0
N03
I/O
PCII3
PCIO3
10-kΩ to 47-kΩ
pullup resistor
MFUNC1
M05
I/O
PCII3
PCIO3
10-kΩ to 47-kΩ
pullup resistor
MFUNC2
P01
I/O
PCII3
PCIO3
10-kΩ to 47-kΩ
pullup resistor
MFUNC3
P02
I/O
PCII3
PCIO3
10-kΩ to 47-kΩ
pullup resistor
MFUNC4
P03
I/O
PCII3
PCIO3
10-kΩ to 47-kΩ
pullup resistor
MFUNC5
N05
I/O
PCII3
PCIO3
10-kΩ to 47-kΩ
pullup resistor
MFUNC6
R01
I/O
PCII3
PCIO3
10-kΩ to 47-kΩ
pullup resistor
NC
W17
Reserved. This terminal has no connection
anywhere within the package.
PHY_TEST_
MA
R17
PHY test pin. Not for customer use. It must be pulled
high with a 4.7-kΩ resistor.
I
RI_OUT/
PME
T03
Ring indicate out and power management event
output. This terminal provides an output for
ring-indicate or PME signals.
O
RSVD
T19
Reserved. This terminal has no connection
anywhere within the package.
—
M03
Serial clock. At PRST, the SCL signal is sampled to
determine if a two-wire serial ROM is present. If the
serial ROM is detected, then this terminal provides
the serial clock signaling and is implemented as
open-drain. For normal operation (a ROM is
implemented in the design), this terminal must be
pulled high to the ROM VDD with a 2.7-kΩ resistor.
Otherwise, it must be pulled low to ground with a
220-Ω resistor.
M02
Serial data. This terminal is implemented as
open-drain, and for normal operation (a ROM is
implemented in the design), this terminal must be
pulled high to the ROM VDD with a 2.7-kΩ resistor.
Otherwise, it must be pulled low to ground with a
220-Ω resistor.
I/O
L07
Speaker output. SPKROUT is the output to the host
system that can carry SPKR or CAUDIO through the
controller from the PC Card interface. SPKROUT is
driven as the exclusive-OR combination of card
SPKR//CAUDIO inputs.
O
SUSPEND
R02
Suspend. SUSPEND protects the internal registers
from clearing when the GRST or PRST signal is
asserted. See Section 3.8.5, Suspend Mode, for
details.
I
PCII6
TEST0
P12
Terminal TEST0 is used for factory test of the
controller and must be connected to ground for
normal operation.
I/O
LVCI1
SCL
SDA
SPKROUT
2−18
Multifunction terminals 0−6. See Section 4.36,
Multifunction Routing Status Register, for
configuration details.
LVCO1
CBT switch
Float
48 MHz clock
source
Float
I/O
LVCI1
PD1
NA
Pullup resistor per
PCI specification
LVCO2
NA
Float
TTLI1
TTLI1
TTLO1
Pullup resistor per
I2C specification
(value depends on
EEPROM,
typically 2.7 kΩ)
Tie to GND if not
using EEPROM
TTLO1
Pullup resistor per
I2C specification
(value depends on
EEPROM,
typically 2.7 kΩ)
Tie to GND if not
using EEPROM
TTLO1
10-kΩ to 47-kΩ
pulldown resistor
10-kΩ to 47-kΩ
pulldown resistor
10-kΩ to 47-kΩ
pullup resistor
10-kΩ to 47-kΩ
pullup resistor
PD1
Tie to GND
Table 2−10. 16-Bit PC Card Address and Data Terminals
External components are not applicable for the 16-bit PC Card address and data terminals. If any 16-bit PC Card
address and data terminal is unused, then the terminal may be left floating.
SOCKET A TERMINAL
SOCKET B TERMINAL†
NAME
NO.
NAME
A_A25
C07
B_A25
H14
A_A24
A07
B_A24
G17
A_A23
C08
B_A23
G19
A_A22
A08
B_A22
H17
A_A21
C09
B_A21
H19
A_A20
A09
B_A20
J17
A_A19
E10
B_A19
J19
A_A18
C10
B_A18
K15
A_A17
A10
B_A17
K17
A_A16
E09
B_A16
H18
A_A15
B08
B_A15
J13
A_A14
F10
B_A14
J18
A_A13
G10
B_A13
K13
A_A12
F09
B_A12
G18
DESCRIPTION
I/O
TYPE
PC Card address. 16-bit PC Card address lines. A25 is the most significant
bit.
O
VCCA/
VCCB
PC Card data. 16-bit PC Card data lines. D15 is the most significant bit.
I/O
VCCA/
VCCB
NO.
A_A11
B11
B_A11
L17
A_A10
A12
B_A10
M17
A_A9
G11
B_A9
K18
A_A8
B10
B_A8
K14
A_A7
B07
B_A7
H15
A_A6
G09
B_A6
F18
A_A5
B06
B_A5
G15
A_A4
C06
B_A4
E19
A_A3
B05
B_A3
E17
A_A2
E06
B_A2
D18
A_A1
A04
B_A1
C19
A_A0
B04
B_A0
D17
A_D15
E12
B_D15
M14
A_D14
B13
B_D14
N17
A_D13
F12
B_D13
N19
A_D12
C14
B_D12
N15
A_D11
A14
B_D11
P18
A_D10
D01
B_D10
B15
A_D9
C01
B_D9
A16
A_D8
C02
B_D8
A17
A_D7
C13
B_D7
M15
A_D6
A13
B_D6
N18
A_D5
E13
B_D5
M13
A_D4
B14
B_D4
P17
A_D3
E14
B_D3
P19
A_D2
D02
B_D2
A15
A_D1
D03
B_D1
B16
A_D0
B01
B_D0
C16
POWER
RAIL
† These terminals are reserved for the PCI6611 and PCI6411 controllers.
2−19
Table 2−11. 16-Bit PC Card Interface Control Terminals
External components are not applicable for the 16-bit PC Card interface control terminals. If any 16-bit PC Card
interface control terminal is unused, then the terminal may be left floating.
SKT A TERMINAL
NAME
A_BVD1
(STSCHG/RI)
NO.
B02
SKT B TERMINAL†
NAME
B_BVD1
(STSCHG/RI)
DESCRIPTION
NO.
F14
Battery voltage detect 1. BVD1 is generated by 16-bit memory PC Cards that
include batteries. BVD1 is used with BVD2 as an indication of the condition of the
batteries on a memory PC Card. Both BVD1 and BVD2 are high when the battery
is good. When BVD2 is low and BVD1 is high, the battery is weak and must be
replaced. When BVD1 is low, the battery is no longer serviceable and the data in
the memory PC Card is lost. See Section 5.6, ExCA Card Status-Change Interrupt
Configuration Register, for enable bits. See Section 5.5, ExCA Card
Status-Change Register, and Section 5.2, ExCA Interface Status Register, for the
status bits for this signal.
I/O
TYPE
POWER
RAIL
I
VCCA/
VCCB
I
VCCA/
VCCB
Status change. STSCHG alerts the system to a change in the READY, write
protect, or battery voltage dead condition of a 16-bit I/O PC Card.
Ring indicate. RI is used by 16-bit modem cards to indicate a ring detection.
A_BVD2
(SPKR)
A02
B_BVD2
(SPKR)
C17
Battery voltage detect 2. BVD2 is generated by 16-bit memory PC Cards that
include batteries. BVD2 is used with BVD1 as an indication of the condition of the
batteries on a memory PC Card. Both BVD1 and BVD2 are high when the battery
is good. When BVD2 is low and BVD1 is high, the battery is weak and must be
replaced. When BVD1 is low, the battery is no longer serviceable and the data in
the memory PC Card is lost. See Section 5.6, ExCA Card Status-Change Interrupt
Configuration Register, for enable bits. See Section 5.5, ExCA Card
Status-Change Register, and Section 5.2, ExCA Interface Status Register, for the
status bits for this signal.
Speaker. SPKR is an optional binary audio signal available only when the card and
socket have been configured for the 16-bit I/O interface. The audio signals from
cards A and B are combined by the controller and are output on SPKROUT.
DMA request. BVD2 can be used as the DMA request signal during DMA
operations to a 16-bit PC Card that supports DMA. The PC Card asserts BVD2 to
indicate a request for a DMA operation.
A_CD1
A_CD2
C15
E05
B_CD1
B_CD2
N13
B17
Card detect 1 and card detect 2. CD1 and CD2 are internally connected to ground
on the PC Card. When a PC Card is inserted into a socket, CD1 and CD2 are
pulled low. For signal status, see Section 5.2, ExCA Interface Status Register.
I
A_CE1
A_CE2
G12
B12
B_CE1
B_CE2
M18
L19
Card enable 1 and card enable 2. CE1 and CE2 enable even- and odd-numbered
address bytes. CE1 enables even-numbered address bytes, and CE2 enables
odd-numbered address bytes.
O
VCCA/
VCCB
E18
Input acknowledge. INPACK is asserted by the PC Card when it can respond to an
I/O read cycle at the current address.
DMA request. INPACK can be used as the DMA request signal during DMA
operations from a 16-bit PC Card that supports DMA. If it is used as a strobe, then
the PC Card asserts this signal to indicate a request for a DMA operation.
I
VCCA/
VCCB
L15
I/O read. IORD is asserted by the controller to enable 16-bit I/O PC Card data
output during host I/O read cycles.
DMA write. IORD is used as the DMA write strobe during DMA operations from a
16-bit PC Card that supports DMA. The controller asserts IORD during DMA
transfers from the PC Card to host memory.
O
VCCA/
VCCB
L13
I/O write. IOWR is driven low by the controller to strobe write data into 16-bit I/O
PC Cards during host I/O write cycles.
DMA read. IOWR is used as the DMA write strobe during DMA operations from a
16-bit PC Card that supports DMA. The controller asserts IOWR during transfers
from host memory to the PC Card.
O
VCCA/
VCCB
A_INPACK
A_IORD
A_IOWR
E07
C11
E11
B_INPACK
B_IORD
B_IOWR
† These terminals are reserved for the PCI6611 and PCI6411 controllers.
2−20
Table 2−11. 16-Bit PC Card Interface Control Terminals (Continued)
SKT A TERMINAL
NAME
A_OE
A_READY
(IREQ)
NO.
C12
C04
SKT B TERMINAL†
NAME
B_OE
B_READY
(IREQ)
DESCRIPTION
I/O
TYPE
Output enable. OE is driven low by the controller to enable 16-bit memory PC Card
data output during host memory read cycles.
DMA terminal count. OE is used as terminal count (TC) during DMA operations to a
16-bit PC Card that supports DMA. The controller asserts OE to indicate TC for a DMA
write operation.
O
VCCA/
VCCB
I
VCCA/
VCCB
O
VCCA/
VCCB
NO.
L18
B19
Ready. The ready function is provided when the 16-bit PC Card and the host socket are
configured for the memory-only interface. READY is driven low by 16-bit memory PC
Cards to indicate that the memory card circuits are busy processing a previous write
command. READY is driven high when the 16-bit memory PC Card is ready to accept a
new data transfer command.
POWER
RAIL
Interrupt request. IREQ is asserted by a 16-bit I/O PC Card to indicate to the host that a
controller on the 16-bit I/O PC Card requires service by the host software. IREQ is high
(deasserted) when no interrupt is requested.
A_REG
C05
B_REG
F15
Attribute memory select. REG remains high for all common memory accesses. When
REG is asserted, access is limited to attribute memory (OE or WE active) and to the I/O
space (IORD or IOWR active). Attribute memory is a separately accessed section of
card memory and is generally used to record card capacity and other configuration and
attribute information.
DMA acknowledge. REG is used as a DMA acknowledge (DACK) during DMA
operations to a 16-bit PC Card that supports DMA. The controller asserts REG to
indicate a DMA operation. REG is used in conjunction with the DMA read (IOWR) or
DMA write (IORD) strobes to transfer data.
A_RESET
A06
B_RESET
F17
PC Card reset. RESET forces a hard reset to a 16-bit PC Card.
O
VCCA/
VCCB
A_VS1
A_VS2
A03
E08
B_VS1
B_VS2
C18
F19
Voltage sense 1 and voltage sense 2. VS1 and VS2, when used in conjunction with
each other, determine the operating voltage of the PC Card.
I/O
VCCA/
VCCB
A_WAIT
B03
B_WAIT
B18
Bus cycle wait. WAIT is driven by a 16-bit PC Card to extend the completion of the
memory or I/O cycle in progress.
I
VCCA/
VCCB
J15
Write enable. WE is used to strobe memory write data into 16-bit memory PC Cards.
WE is also used for memory PC Cards that employ programmable memory
technologies.
DMA terminal count. WE is used as a TC during DMA operations to a 16-bit PC Card
that supports DMA. The controller asserts WE to indicate the TC for a DMA read
operation.
O
VCCA/
VCCB
I
VCCA/
VCCB
A_WE
B09
B_WE
Write protect. WP applies to 16-bit memory PC Cards. WP reflects the status of the
write-protect switch on 16-bit memory PC Cards. For 16-bit I/O cards, WP is used for
the 16-bit port (IOIS16) function.
A_WP
(IOIS16)
C03
B_WP
(IOIS16)
A18
I/O is 16 bits. IOIS16 applies to 16-bit I/O PC Cards. IOIS16 is asserted by the 16-bit
PC Card when the address on the bus corresponds to an address to which the 16-bit
PC Card responds, and the I/O port that is addressed is capable of 16-bit accesses.
DMA request. WP can be used as the DMA request signal during DMA operations to a
16-bit PC Card that supports DMA. If used, then the PC Card asserts WP to indicate a
request for a DMA operation.
† These terminals are reserved for the PCI6611 and PCI6411 controllers.
2−21
Table 2−12. CardBus PC Card Interface System Terminals
A 33-Ω to 47-Ω series damping resistor (per PC Card specification) is the only external component needed for
terminals B08 (A_CCLK) and H17 (B_CCLK). If any CardBus PC Card interface system terminal is unused, then the
terminal may be left floating.
SKT A TERMINAL
NAME
A_CCLK
A_CCLKRUN
A_CRST
NO.
E09
C03
A06
SKT B TERMINAL†
NAME
B_CCLK
B_CCLKRUN
B_CRST
NO.
DESCRIPTION
INPUT
OUTPUT
PU/
PD
POWER
RAIL
H18
CardBus clock. CCLK provides synchronous timing
for all transactions on the CardBus interface. All
signals except CRST, CCLKRUN, CINT, CSTSCHG,
CAUDIO, CCD2, CCD1, CVS2, and CVS1 are
sampled on the rising edge of CCLK, and all timing
parameters are defined with the rising edge of this
signal. CCLK operates at the PCI bus clock
frequency, but it can be stopped in the low state or
slowed down for power savings.
O
A18
CardBus clock run. CCLKRUN is used by a CardBus
PC Card to request an increase in the CCLK
frequency, and by the controller to indicate that the
CCLK frequency is going to be decreased.
I/O
PCII4
PCIO4
PU3
VCCA/
VCCB
F17
CardBus reset. CRST brings CardBus PC
Card-specific registers, sequencers, and signals to a
known state. When CRST is asserted, all CardBus
PC Card signals are placed in a high-impedance
state, and the controller drives these signals to a valid
logic level. Assertion can be asynchronous to CCLK,
but deassertion must be synchronous to CCLK.
O
PCII4
PCIO4
PU3
VCCA/
VCCB
† These terminals are reserved for the PCI6611 and PCI6411 controllers.
2−22
I/O
TYPE
VCCA/
VCCB
PCIO3
Table 2−13. CardBus PC Card Address and Data Terminals
External components are not applicable for the 16-bit PC Card address and data terminals. If any CardBus PC Card
address and data terminal is unused, then the terminal may be left floating.
SKT A TERMINAL
SKT B TERMINAL†
NAME
NO.
NAME
NO.
A_CAD31
D01
B_CAD31
B15
A_CAD30
C01
B_CAD30
A16
A_CAD29
D03
B_CAD29
B16
A_CAD28
C02
B_CAD28
A17
A_CAD27
B01
B_CAD27
C16
A_CAD26
B04
B_CAD26
D17
A_CAD25
A04
B_CAD25
C19
A_CAD24
E06
B_CAD24
D18
A_CAD23
B05
B_CAD23
E17
A_CAD22
C06
B_CAD22
E19
A_CAD21
B06
B_CAD21
G15
A_CAD20
G09
B_CAD20
F18
A_CAD19
C07
B_CAD19
H14
A_CAD18
B07
B_CAD18
H15
A_CAD17
A07
B_CAD17
G17
A_CAD16
A10
B_CAD16
K17
A_CAD15
E11
B_CAD15
L13
A_CAD14
G11
B_CAD14
K18
A_CAD13
C11
B_CAD13
L15
A_CAD12
B11
B_CAD12
L17
A_CAD11
C12
B_CAD11
L18
A_CAD10
B12
B_CAD10
L19
A_CAD9
A12
B_CAD9
M17
A_CAD8
E12
B_CAD8
M14
A_CAD7
C13
B_CAD7
M15
A_CAD6
F12
B_CAD6
N19
A_CAD5
A13
B_CAD5
N18
A_CAD4
C14
B_CAD4
N15
A_CAD3
E13
B_CAD3
M13
A_CAD2
A14
B_CAD2
P18
A_CAD1
B14
B_CAD1
P17
A_CAD0
E14
B_CAD0
P19
A_CC/BE3
C05
B_CC/BE3
F15
A_CC/BE2
F09
B_CC/BE2
G18
A_CC/BE1
B10
B_CC/BE1
K14
A_CC/BE0
G12
B_CC/BE0
M18
A_CPAR
G10
B_CPAR
K13
DESCRIPTION
I/O
TYPE
CardBus address and data. These signals make up the multiplexed
CardBus address and data bus on the CardBus interface. During
the address phase of a CardBus cycle, CAD31−CAD0 contain a
32-bit address. During the data phase of a CardBus cycle,
CAD31−CAD0 contain data. CAD31 is the most significant bit.
POWER
RAIL
INPUT
OUTPUT
I/O
PCII7
PCIO7
VCCA/
VCCB
CardBus bus commands and byte enables. CC/BE3−CC/BE0 are
multiplexed on the same CardBus terminals. During the address
phase of a CardBus cycle, CC/BE3−CC/BE0 define the bus
command. During the data phase, this 4-bit bus is used as byte
enables. The byte enables determine which byte paths of the full
32-bit data bus carry meaningful data. CC/BE0 applies to byte 0
(CAD7−CAD0), CC/BE1 applies to byte 1 (CAD15−CAD8),
CC/BE2 applies to byte 2 (CAD23−CAD16), and CC/BE3 applies to
byte 3 (CAD31−CAD24).
I/O
PCII7
PCIO7
VCCA/
VCCB
CardBus parity. In all CardBus read and write cycles, the controller
calculates even parity across the CAD and CC/BE buses. As an
initiator during CardBus cycles, the controller outputs CPAR with a
one-CCLK delay. As a target during CardBus cycles, the controller
compares its calculated parity to the parity indicator of the initiator;
a compare error results in a parity error assertion.
I/O
PCII7
PCIO7
VCCA/
VCCB
† These terminals are reserved for the PCI6611 and PCI6411 controllers.
2−23
Table 2−14. CardBus PC Card Interface Control Terminals
If any CardBus PC Card interface control terminal is unused, then the terminal may be left floating.
SKT A TERMINAL
SKT B TERMINAL†
INPUT
OUTPUT
PU/
PD
I
PCII4
PCIO4
PU3
VCCA/
VCCB
I/O
PCII4
PCIO4
PU3
VCCA/
VCCB
CardBus detect 1 and CardBus detect 2. CCD1 and
CCD2 are used in conjunction with CVS1 and CVS2
to identify card insertion and interrogate cards to
determine the operating voltage and card type.
I
TTLI2
H19
CardBus device select. The controller asserts
CDEVSEL to claim a CardBus cycle as the target
device. As a CardBus initiator on the bus, the
controller monitors CDEVSEL until a target responds.
If no target responds before timeout occurs, then the
controller terminates the cycle with an initiator abort.
I/O
PCII4
PCIO4
I/O
PCII7
PCIO7
VCCA/
VCCB
VCCA/
VCCB
DESCRIPTION
NAME
NO.
NAME
NO.
A_CAUDIO
A02
B_CAUDIO
C17
CardBus audio. CAUDIO is a digital input signal from
a PC Card to the system speaker. The controller
supports the binary audio mode and outputs a binary
signal from the card to SPKROUT.
A_CBLOCK
E10
B_CBLOCK
J19
CardBus lock. CBLOCK is used to gain exclusive
access to a target.
A_CCD1
A_CCD2
C15
E05
B_CCD1
B_CCD2
N13
B17
A_CDEVSEL
C09
B_CDEVSEL
POWER
RAIL
PU4
PU3
VCCA/
VCCB
A_CFRAME
C08
B_CFRAME
G19
CardBus cycle frame. CFRAME is driven by the
initiator of a CardBus bus cycle. CFRAME is asserted
to indicate that a bus transaction is beginning, and
data transfers continue while this signal is asserted.
When CFRAME is deasserted, the CardBus bus
transaction is in the final data phase.
A_CGNT
B09
B_CGNT
J15
CardBus bus grant. CGNT is driven by the controller
to grant a CardBus PC Card access to the CardBus
bus after the current data transaction has been
completed.
O
PCII7
PCIO7
A_CINT
C04
B_CINT
B19
CardBus interrupt. CINT is asserted low by a CardBus
PC Card to request interrupt servicing from the host.
I
PCII4
PCIO4
PU3
VCCA/
VCCB
B_CIRDY
J13
CardBus initiator ready. CIRDY indicates the ability of
the CardBus initiator to complete the current data
phase of the transaction. A data phase is completed
on a rising edge of CCLK when both CIRDY and
CTRDY are asserted. Until CIRDY and CTRDY are
both sampled asserted, wait states are inserted.
I/O
PCII4
PCIO4
PU3
VCCA/
VCCB
CardBus parity error. CPERR reports parity errors
during CardBus transactions, except during special
cycles. It is driven low by a target two clocks following
the data cycle during which a parity error is detected.
I/O
PCII4
PCIO4
PU3
VCCA/
VCCB
A_CIRDY
B08
A_CPERR
F10
B_CPERR
J18
A_CREQ
E07
B_CREQ
E18
CardBus request. CREQ indicates to the arbiter that
the CardBus PC Card desires use of the CardBus bus
as an initiator.
I
PCII4
PCIO4
PU3
VCCA/
VCCB
B18
CardBus system error. CSERR reports address parity
errors and other system errors that could lead to
catastrophic results. CSERR is driven by the card
synchronous to CCLK, but deasserted by a weak
pullup; deassertion may take several CCLK periods.
The controller can report CSERR to the system by
assertion of SERR on the PCI interface.
I
PCII4
PCIO4
PU3
VCCA/
VCCB
A_CSERR
B03
B_CSERR
† These terminals are reserved for the PCI6611 and PCI6411 controllers.
2−24
I/O
TYPE
Table 2−14. CardBus PC Card Interface Control Terminals (Continued)
SKT A TERMINAL
NAME
NO.
SKT B TERMINAL†
NAME
NO.
DESCRIPTION
I/O
TYPE
INPUT
OUTPUT
PU/
PD
POWER
RAIL
PCIO4
PU3
VCCA/
VCCB
SW1
VCCA/
VCCB
A_CSTOP
A09
B_CSTOP
J17
CardBus stop. CSTOP is driven by a CardBus target
to request the initiator to stop the current CardBus
transaction. CSTOP is used for target disconnects,
and is commonly asserted by target devices that do
not support burst data transfers.
A_CSTSCHG
B02
B_CSTSCHG
F14
CardBus status change. CSTSCHG alerts the system
to a change in the card status, and is used as a
wake-up mechanism.
I
PCII6
I/O
PCII1
PCIO1
PU5
VCCA/
VCCB
I/O
TTLI2
TTLO1
PU4
VCCA/
VCCB
A_CTRDY
A08
B_CTRDY
H17
CardBus target ready. CTRDY indicates the ability of
the CardBus target to complete the current data
phase of the transaction. A data phase is completed
on a rising edge of CCLK, when both CIRDY and
CTRDY are asserted; until this time, wait states are
inserted.
A_CVS1
A_CVS2
A03
E08
B_CVS1
B_CVS2
C18
F19
CardBus voltage sense 1 and CardBus voltage sense
2. CVS1 and CVS2 are used in conjunction with
CCD1 and CCD2 to identify card insertion and
interrogate cards to determine the operating voltage
and card type.
I/O
PCII4
† These terminals are reserved for the PCI6611 and PCI6411 controllers.
2−25
Table 2−15. Reserved Terminals
TERMINAL
NAME
DESCRIPTION
NO.
PIN STRAPPING
RSVD
R19, U15, U17,
U18, V15, V18,
W15, W18
Reserved
Float
RSVD
P15, R12, R18,
U13, V13, V14,
V16, W14, W16
Reserved
Tie to GND
RSVD
M11
Reserved
Pullup to VCC through 1-kΩ resistor
RSVD
U19
Reserved
Pull directly to VCC
Table 2−16. SD/MMC Terminals
If any SD/MMC terminal is unused, then the terminal may be left floating.
TERMINAL
DESCRIPTION
I/O
TYPE
Media card power control for flash media sockets.
O
E03
SD/MMC card detect. This input is asserted when
SD/MMC cards are inserted.
I
SD_CLK
J05, G05
SD flash clock. This output provides the SD/MMC
clock, which operates at 16 MHz.
I/O
SD_CMD
J03, F03
SD flash command. This signal provides the SD
command per the SD Memory Card Specifications.
I/O
SD flash data [3:0]. These signals provide the SD
data path per the SD Memory Card Specifications.
SD write protect data. This signal indicates that the
media inserted in the socket is write protected.
NAME
NO.
MC_PWR_CTRL_0
F01
MC_PWR_CTRL_1
F02
SD_CD
SD_DAT3
J02, H05
SD_DAT2
J01, G03
SD_DAT1
J06, G02
SD_DAT0
H03, G01
SD_WP
H07
INPUT
OUTPUT
PU/
PD
POWER
RAIL
Power switch or
FET to turn power
on to FM socket
LVCO1
LVCI1
EXTERNAL
COMPONENTS
PU2
VCC
TTLO2
SW2
VCC
TTLI2
TTLO2
SW2
VCC
I/O
TTLI2
TTLO2
SW2
VCC
I
TTLI2
SW2
VCC
PU/
PD
POWER
RAIL
Table 2−17. Memory Stick/PRO Terminals
If any Memory Stick/PRO terminal is unused, then the terminal may be left floating.
TERMINAL
NAME
NO.
MC_PWR_CTRL_0
F01
MC_PWR_CTRL_1
F02
MS_BS
DESCRIPTION
I/O
TYPE
INPUT
OUTPUT
Media card power control for flash media sockets.
O
LVCO1
F03
Memory Stick bus state. This signal provides Memory
Stick bus state information.
I/O
TTLO2
MS_CD
F05
Media Card detect. This input is asserted when a
Memory Stick or Memory Stick Pro media is inserted.
I
MS_CLK
G05
Memory Stick clock. This output provides the MS clock,
which operates at 16 MHz.
I/O
Memory Stick data [3:1]. These signals provide the
Memory Stick data path.
I/O
Memory Stick serial data I/O. This signal provides
Memory Stick data input/output. Memory Stick data 0.
I/O
MS_DATA3
H05
MS_DATA2
G03
MS_DATA1
G02
MS_SDIO (DATA0)
G01
2−26
Power switch or
FET to turn power
on to FM socket
SW2
VCC
PU2
VCC
TTLO2
SW2
VCC
TTLI2
TTLO2
SW2
VCC
TTLI2
TTLO2
SW2
VCC
LVCI1
EXTERNAL
COMPONENTS
Table 2−18. Smart Media/XD Terminals
If any Smart Media/XD terminal is unused, then the terminal may be left floating.
TERMINAL
NAME
NO.
DESCRIPTION
I/O
TYPE
Media card power control for flash media sockets.
O
LVCO1
TTLO2
MC_PWR_CTRL_0
F01
MC_PWR_CTRL_1
F02
SM_ALE
J03
SmartMedia address latch enable. This signal
functions as specified in the SmartMedia
specification, and is used to latch addresses
passed over SM_D7−SM_D0.
O
SM_CD
F06
SmartMedia card detect. This input is asserted
when SmartMedia cards are inserted.
I
SM_CE
H07
SmartMedia card enable. This signal functions as
specified in the SmartMedia specification, and is
used to enable the media for a pending
transaction.
O
SM_CLE
J07
SmartMedia command latch enable. This signal
functions as specified in the SmartMedia
specification, and is used to latch commands
passed over SM_D7−SM_D0.
O
SM_D7
J02
SM_D6
J01
SmartMedia data terminals. These signals pass
data to and from the SmartMedia, and functions
as specified in the SmartMedia specifications.
I/O
SM_D5
J06
SM_D4
H03
SM_D3
H05
SM_D2
G03
SM_D1
G02
SM_D0
G01
SM_EL_WP
G05
SmartMedia electrical write protect.
O
SM_PHYS_WP
K02
SmartMedia physical write protect. This input
comes from the write protect tab of the
SmartMedia card.
I
SM_RE
J05
SmartMedia read enable. This signal functions as
specified in the SmartMedia specification, and is
used to latch a read transfer from the card.
O
SM_R/B
K01
SmartMedia read/busy. This signal functions as
specified in the SmartMedia specification, and is
used to pace data transfers to the card.
I
SM_WE
F03
SmartMedia write enable. This signal functions as
specified in the SmartMedia specification, and is
used to latch a write transfer to the card.
O
INPUT
OUTPUT
PCII5
PCII5
POWER
RAIL
EXTERNAL
PARTS
Power switch or
FET to turn power
on to FM socket
SW2
VCC
PU2
VCC
TTLO2
SW2
VCC
TTLO2
SW2
VCC
TTLO2
SW2
VCC
TTLO2
SW2
VCC
PCIO5
SW3
TTLO2
SW2
VCC
PCIO5
SW3
VCC
TTLO2
SW2
VCC
LVCI1
TTLI2
PU/
PD
2−27
Table 2−19. Smart Card Terminals †
If any Smart Card terminal is unused, then the terminal may be left floating, except for SC_VCC_5V which must be
connected to 5 V.
TERMINAL
NAME
NO.
DESCRIPTION
I/O
TYPE
INPUT
TTLI2
OUTPUT
PU/
PD
POWER
RAIL
SW2
VCC
SC_CD
L02
Smart Card card detect. This input is asserted when Smart
Cards are inserted.
I
SC_CLK
K05
Smart Card clock. The controller drives a 3-MHz clock to the
Smart Card interface when enabled.
O
SC_DATA
L01
Smart Card data input/output
I/O
PCII5
SC_OC
L03
Smart Card overcurrent. This input comes from the Smart
Card power switch.
I
LVCI1
SC_PWR_CTRL
L05
Smart Card power control for the Smart Card socket.
O
SC_FCB
K02
Smart Card function code. The controller does not support
synchronous Smart Cards as specified in ISO/IEC 7816-10,
and this terminal is in a high-impedance state.
I
PCII5
PCIO5
SW3
SC_GPIO6
H03
SC_GPIO5
J06
SC_GPIO4
J01
SC_GPIO3
J02
I/O
TTLI2
TTLO2
SW2
5V
SC_GPIO2
J03
Smart Card general-purpose I/O terminals. These signals
can be controlled by firmware and are used as control
signals for an external Smart Card interface chip or level
shifter.
SC_GPIO1
J05
SC_GPIO0
J07
SC_RFU
K01
Smart Card reserved. This terminal is in a high-impedance
state.
I
PCII5
PCIO5
SW3
5V
SC_RST
K03
Smart Card This signal starts and stops the Smart Card
reset sequence. The controller asserts this reset when
requested by the host.
O
SC_VCC_5V
K07
Smart Card power terminal
† These terminals are reserved for the PCI6421 and PCI6411 controllers.
2−28
PWR
22 kΩ resistor to
GND
68 pF capacitor
to GND
PCIO8
PCIO5
EXTERNAL
PARTS
SW3
PU2
5V
Power switch or
FET to turn on
power to FM
socket
LVCO1
PCIO6
1 kΩ resistor to
5V
3 Feature/Protocol Descriptions
The following sections give an overview of the PCI6x21/PCI6x11 controller. Figure 3−1 shows the connections to the
PCI6x21/PCI6x11 controller. The PCI interface includes all address/data and control signals for PCI protocol. The
interrupt interface includes terminals for parallel PCI, parallel ISA, and serialized PCI and ISA signaling.
PCI Bus
EEPROM
SD/MMC
MS/MSPRO
SM/xD
PCI6x21/
PCI6x11
SD/MMC
Power Switch
Power Switch
Power
Switch
PC
Card/
UltraMedia
Card
PC
Card/
UltraMedia
Card
Figure 3−1. PCI6x21/PCI6x11 System Block Diagram
3.1 Power Supply Sequencing
The PCI6x21/PCI6x11 controller contains 3.3-V I/O buffers with 5-V tolerance requiring a core power supply and
clamp voltages. The core power supply is always 1.5 V. The clamp voltages can be either 3.3 V or 5 V, depending
on the interface. The following power-up and power-down sequences are recommended.
The power-up sequence is:
1. Power core 1.5 V.
2. Apply the I/O voltage.
3. Apply the analog voltage.
4. Apply the clamp voltage.
The power-down sequence is:
1. Remove the clamp voltage.
2. Remove the analog voltage.
3. Remove the I/O voltage.
4. Remove power from the core.
NOTE: If the voltage regulator is enabled, then steps 2, 3, and 4 of the power-up sequence
and steps 1, 2, and 3 of the power-down sequence all occur simultaneously.
3−1
3.2 I/O Characteristics
The PCI6x21/PCI6x11 controller meets the ac specifications of the PC Card Standard (release 8.1) and the PCI Local
Bus Specification. Figure 3−2 shows a 3-state bidirectional buffer. Section 10.2, Recommended Operating
Conditions, provides the electrical characteristics of the inputs and outputs.
VCCP
Tied for Open Drain
OE
Pad
Figure 3−2. 3-State Bidirectional Buffer
3.3 Clamping Voltages
The clamping voltages are set to match whatever external environment the PCI6x21/PCI6x11 controller is interfaced
with: 3.3 V or 5 V. The I/O sites can be pulled through a clamping diode to a voltage rail that protects the core from
external signals. The core power supply is 1.5 V and is independent of the clamping voltages. For example, PCI
signaling can be either 3.3 V or 5 V, and the PCI6x21/PCI6x11 controller must reliably accommodate both voltage
levels. This is accomplished by using a 3.3-V I/O buffer that is 5-V tolerant, with the applicable clamping voltage
applied. If a system designer desires a 5-V PCI bus, then VCCP can be connected to a 5-V power supply.
3.4 Peripheral Component Interconnect (PCI) Interface
The PCI6x21/PCI6x11 controller is fully compliant with the PCI Local Bus Specification. The PCI6x21/PCI6x11
controller provides all required signals for PCI master or slave operation, and may operate in either a 5-V or 3.3-V
signaling environment by connecting the VCCP terminals to the desired voltage level. In addition to the mandatory
PCI signals, the PCI6x21/PCI6x11 controller provides the optional interrupt signals INTA, INTB, INTC, and INTD.
3.4.1
Device Resets
During the power-up sequence, GRST and PRST must be asserted. GRST can only be deasserted 100 µs after PCLK
is stable, and 2 ms after VCC is stable. PRST can be deasserted at the same time as GRST or any time thereafter.
3.4.2
Serial EEPROM I2C Bus
The PCI6x21/PCI6x11 controller offers many choices for modes of operation, and these choices are selected by
programming several configuration registers. For system board applications, these registers are normally
programmed through the BIOS routine. For add-in card and docking-station/port-replicator applications, the
PCI6x21/PCI6x11 controller provides a two-wire inter-integrated circuit (IIC or I2C) serial bus for use with an external
serial EEPROM.
The PCI6x21/PCI6x11 controller is always the bus master, and the EEPROM is always the slave. Either device can
drive the bus low, but neither device drives the bus high. The high level is achieved through the use of pullup resistors
on the SCL and SDA signal lines. The PCI6x21/PCI6x11 controller is always the source of the clock signal, SCL.
System designers who wish to load register values with a serial EEPROM must use pullup resistors on the SCL and
SDA terminals. If the PCI6x21/PCI6x11 controller detects a logic-high level on the SCL terminal at the end of GRST,
then it initiates incremental reads from the external EEPROM. Any size serial EEPROM up to the I2C limit of 16 Kbits
can be used, but only the first 96 bytes (from offset 00h to offset 5Fh) are required to configure the PCI6x21/PCI6x11
controller. Figure 3−3 shows a serial EEPROM application.
In addition to loading configuration data from an EEPROM, the PCI6x21/PCI6x11 I2C bus can be used to read and
write from other I2C serial devices. A system designer can control the I2C bus, using the PCI6x21/PCI6x11 controller
3−2
as bus master, by reading and writing PCI configuration registers. Setting bit 3 (SBDETECT) in the serial bus
control/status register (PCI offset B3h, see Section 4.50) causes the PCI6x21/PCI6x11 controller to route the SDA
and SCL signals to the SDA and SCL terminals, respectively. The read/write data, slave address, and byte addresses
are manipulated by accessing the serial bus data, serial bus index, and serial bus slave address registers (PCI offsets
B0h, B1h, and B2h; see Sections 4.47, 4.48, and 4.49, respectively).
EEPROM interface status information is communicated through the serial bus control and status register (PCI offset
B3h, see Section 4.50). Bit 3 (SBDETECT) in this register indicates whether or not the PCI6x21/PCI6x11 serial ROM
circuitry detects the pullup resistor on SCL. Any undefined condition, such as a missing acknowledge, results in bit
0 (ROM_ERR) being set. Bit 4 (ROMBUSY) is set while the subsystem ID register is loading (serial ROM interface
is busy).
The subsystem vendor ID for functions 2 and 3 is also loaded through EEPROM. The EEPROM load data goes to
all four functions from the serial EEPROM loader.
VCC
Serial
ROM
A0
A1
SCL
SCL
A2
SDA
SDA
PCI6x21/PCI6x11
Figure 3−3. Serial ROM Application
3.4.3
Functions 0 and 1 (CardBus) Subsystem Identification
The subsystem vendor ID register (PCI offset 40h, see Section 4.26) and subsystem ID register (PCI offset 42h, see
Section 4.27) make up a doubleword of PCI configuration space for functions 0 and 1. This doubleword register is
used for system and option card (mobile dock) identification purposes and is required by some operating systems.
Implementation of this unique identifier register is a PC 99/PC 2001 requirement.
The PCI6x21/PCI6x11 controller offers two mechanisms to load a read-only value into the subsystem registers. The
first mechanism relies upon the system BIOS providing the subsystem ID value. The default access mode to the
subsystem registers is read-only, but can be made read/write by clearing bit 5 (SUBSYSRW) in the system control
register (PCI offset 80h, see Section 4.29). Once this bit is cleared, the BIOS can write a subsystem identification
value into the registers at PCI offset 40h. The BIOS must set the SUBSYSRW bit such that the subsystem vendor
ID register and subsystem ID register are limited to read-only access. This approach saves the added cost of
implementing the serial electrically erasable programmable ROM (EEPROM).
In some conditions, such as in a docking environment, the subsystem vendor ID register and subsystem ID register
must be loaded with a unique identifier via a serial EEPROM. The PCI6x21/PCI6x11 controller loads the data from
the serial EEPROM after a reset of the primary bus. Note that the SUSPEND input gates the PCI reset from the entire
PCI6x21/PCI6x11 core, including the serial-bus state machine (see Section 3.8.5, Suspend Mode, for details on
using SUSPEND).
The PCI6x21/PCI6x11 controller provides a two-line serial-bus host controller that can interface to a serial EEPROM.
See Section 3.6, Serial EEPROM Interface, for details on the two-wire serial-bus controller and applications.
3−3
3.4.4
Function 3 (Flash Media) Subsystem Identification
The subsystem identification register is used for system and option card identification purposes. This register can
be initialized from the serial EEPROM or programmed via the subsystem access register at offset 50h in the PCI
configuration space (see Section 7.22, Subsystem Access Register). See Table 7−15 for a complete description of
the register contents.
The contents of the subsystem access register are aliased to the subsystem vendor ID and subsystem ID registers
at Function 3 PCI offsets 2Ch and 2Eh, respectively. See Table 7−15 for a complete description of the register
contents.
3.4.5
Function 4 SD Host Subsystem Identification
The subsystem identification register is used for system and option card identification purposes. This register can
be initialized from the serial EEPROM or programmed via the subsystem access register at offset 8Ch in the PCI
configuration space (see Section 8.23, Subsystem Access Register). See Table 8−16 for a complete description of
the register contents.
The contents of the subsystem access register are aliased to the subsystem vendor ID and subsystem ID registers
at Function 4 PCI offsets 2Ch and 2Eh, respectively. See Table 8−16 for a complete description of the register
contents.
3.4.6
Function 5 Smart Card Subsystem Identification
The subsystem identification register is used for system and option card identification purposes. This register can
be initialized from the serial EEPROM or programmed via the subsystem access register at offset 50h in the PCI
configuration space (see Section 9.23, Subsystem ID Alias Register). See Table 9−14 for a complete description of
the register contents.
The contents of the subsystem access register are aliased to the subsystem vendor ID and subsystem ID registers
at Function 5 PCI offsets 2Ch and 2Eh, respectively. See Table 9−14 for a complete description of the register
contents.
3.5 PC Card Applications
The PCI6x21/PCI6x11 controller supports all the PC Card features and applications as described below.
•
•
•
•
•
3.5.1
Card insertion/removal and recognition per the PC Card Standard (release 8.1)
Speaker and audio applications
LED socket activity indicators
PC Card controller programming model
CardBus socket registers
PC Card Insertion/Removal and Recognition
The PC Card Standard (release 8.1) addresses the card-detection and recognition process through an interrogation
procedure that the socket must initiate on card insertion into a cold, nonpowered socket. Through this interrogation,
card voltage requirements and interface (16-bit versus CardBus) are determined.
The scheme uses the card-detect and voltage-sense signals. The configuration of these four terminals identifies the
card type and voltage requirements of the PC Card interface.
3−4
3.5.2
Low Voltage CardBus Card Detection
The card detection logic of the PCI6x21/PCI6x11 controller includes the detection of Cardbus cards with VCC = 3.3 V
and VPP = 1.8 V. The reporting of the 1.8-V CardBus card (VCC = 3.3 V, VPP = 1.8 V) is reported through the socket
present state register as follows based on bit 10 (12V_SW_SEL) in the general control register (PCI offset 86h, see
Section 4.31):
•
If the 12V_SW_SEL bit is 0 (TPS2228 is used), then the 1.8-V CardBus card causes the 3VCARD bit in the
socket present state register to be set.
•
If the 12V_SW_SEL bit is 1 (TPS2226 is used), then the 1.8-V CardBus card causes the XVCARD bit in
the socket present state register to be set.
3.5.3
UltraMedia Card Detection
The PCI6x21/PCI6x11 controller is capable of detecting all the UltraMedia devices defined by the PCMCIA Proposal
0262 – MultiMedia Cards, Secure Digital, Memory Stick devices, and Smart Card devices. The detection of these
devices is made possible through circuitry included in the PCI6x21/PCI6x11 controller and the adapters used to
interface these devices with the PC Card/CardBus sockets. No additional hardware requirements are placed on the
system designer in order to support these devices.
The PC Card Standard addresses the card detection and recognition process through an interrogation procedure that
the socket must initiate upon card insertion into a cold, unpowered socket. Through this interrogation, card voltage
requirements and interface type (16-bit vs. CardBus) are determined. The scheme uses the CD1, CD2, VS1, and VS2
signals (CCD1, CCD2, CVS1, CVS2 for CardBus). A PC Card designer connects these four terminals in a certain
configuration to indicate the type of card and its supply voltage requirements. The encoding scheme for this, defined
in the PC Card Standard, is shown in Table 3−1.
Table 3−1. PC Card—Card Detect and Voltage Sense Connections
CD2//CCD2
CD1//CCD1
VS2//CVS2
VS1//CVS1
Key
Interface
Ground
Ground
Ground
Ground
Open
Open
5V
16-bit PC Card
Open
Ground
5V
16-bit PC Card
VCC
5V
VPP/VCORE
Per CIS (VPP)
5 V and 3.3 V
Per CIS (VPP)
5 V, 3.3 V, and
Per CIS (VPP)
Ground
Ground
Ground
Ground
5V
16-bit PC Card
Ground
Ground
Open
Ground
LV
16-bit PC Card
3.3 V
Per CIS (VPP)
Ground
Connect to
CVS1
Open
Connect to
CCD1
LV
CardBus PC Card
3.3 V
Per CIS (VPP)
Ground
X.X V
Ground
Ground
Ground
LV
16-bit PC Card
3.3 V and X.X V
Per CIS (VPP)
Connect to
CVS2
Ground
Connect to
CCD2
Ground
LV
CardBus PC Card
3.3 V and X.X V
Per CIS (VPP)
Connect to
CVS1
Ground
Ground
Connect to
CCD2
LV
CardBus PC Card
3.3 V, X.X V,
and Y.Y V
Per CIS (VPP)
Ground
Ground
Ground
Open
LV
16-bit PC Card
X.X V
Per CIS (VPP)
Connect to
CVS2
Ground
Connect to
CCD2
Open
LV
CardBus PC Card
3.3 V
1.8 V (VCORE)
Ground
Connect to
CVS2
Connect to
CCD1
Open
LV
CardBus PC Card
X.X V and Y.Y V
Per CIS (VPP)
Connect to
CVS1
Ground
Open
Connect to
CCD2
LV
CardBus PC Card
Y.Y V
Per CIS (VPP)
Ground
Connect to
CVS1
Ground
Connect to
CCD1
LV
UltraMedia
Ground
Connect to
CVS2
Connect to
CCD1
Ground
Reserved
Per query terminals
Reserved
3−5
3.5.4
Flash Media Card Detection
The PCI6x21/PCI6x11 controller detects an MMC/SD card insertion through the MC_CD_0 terminal. When this
terminal is 0, an MMC/SD card is inserted in the socket. The PCI6x21/PCI6x11 controller debounces the MC_CD_0
signal such that instability of the signal does not cause false card insertions. The debounce time is approximately 50
ms. The MC_CD_0 signal is not debounced on card removals. The filtered MC_CD_0 signal is used in the MMC/SD
card detection and power control logic.
The MMC/SD card detection and power control logic contains three main states:
•
•
•
Socket empty, power off
Card inserted, power off
Card inserted, power on
The PCI6x21/PCI6x11 controller detects a Memory Stick card insertion through the MC_CD_1 terminal. When this
terminal is 0, a Memory Stick card is inserted in the socket. The PCI6x21/PCI6x11 controller debounces the
MC_CD_1 signal such that instability of the signal does not cause false card insertions. The debounce time is
approximately 50 ms. The MC_CD_1 signal is not debounced on card removals. The filtered MC_CD_1 signal is used
in the Memory Stick card detection and power control logic.
The Memory Stick card detection and power control logic contains three main states:
•
•
•
Socket empty, power off
Card inserted, power off
Card inserted, power on
3.5.5
Power Switch Interface
The power switch interface of the PCI6x21/PCI6x11 controller is a 3-pin serial interface. This 3-pin interface is
implemented such that the PCI6x21/PCI6x11 controller can connect to both the TPS2226 and TPS2228 power
switches. Bit 10 (12V_SW_SEL) in the general control register (PCI offset 86h, see Section 4.31) selects the power
switch that is implemented. The PCI6x21/PCI6x11 controller defaults to use the control logic for the TPS2228 power
switch. See Table 3−2 and Table 3−5 below for the power switch control logic.
Table 3−2. TPS2228 Control Logic—xVPP/VCORE
D8(SHDN)
D0
D1
D9
OUTPUT
V_AVPP/VCORE
D8(SHDN)
D4
D5
D10
OUTPUT
V_BVPP/VCORE
1
0
0
X
0V
1
0
0
X
0V
1
0
1
0
3.3 V
1
0
1
0
3.3 V
1
0
1
1
5V
1
0
1
1
5V
1
1
0
X
Hi-Z
1
1
0
X
Hi-Z
1
1
1
0
Hi-Z
1
1
1
0
Hi-Z
1
1
1
1
1.8 V
1
1
1
1
1.8 V
0
X
X
X
Hi-Z
0
X
X
X
Hi-Z
AVPP/VCORE CONTROL SIGNALS
BVPP/VCORE CONTROL SIGNALS
Table 3−3. TPS2228 Control Logic—xVCC
D8(SHDN)
D3
D2
OUTPUT
V_AVCC
D8(SHDN)
D6
D7
OUTPUT
V_BVCC
1
0
0
0V
1
0
0
0V
1
0
1
3.3 V
1
0
1
3.3 V
1
1
0
5V
1
1
0
5V
AVCC CONTROL SIGNALS
3−6
BVCC CONTROL SIGNALS
1
1
1
0V
1
1
1
0V
0
X
X
Hi-Z
0
X
X
Hi-Z
Table 3−4. TPS2226 Control Logic—xVPP
D8(SHDN)
D0
D1
D9
OUTPUT
V_AVPP
D8(SHDN)
D4
D5
D10
OUTPUT
V_BVPP
1
0
0
X
0V
1
0
0
X
0V
1
0
1
0
3.3 V
1
0
1
0
3.3 V
1
0
1
1
5V
1
0
1
1
5V
1
1
0
X
12 V
1
1
0
X
12 V
AVPP CONTROL SIGNALS
BVPP CONTROL SIGNALS
1
1
1
X
Hi-Z
1
1
1
X
Hi-Z
0
X
X
X
Hi-Z
0
X
X
X
Hi-Z
Table 3−5. TPS2226 Control Logic—xVCC
OUTPUT
V_AVCC
D8(SHDN)
D6
D7
0
0V
1
0
0
0V
1
3.3 V
1
0
1
3.3 V
0
5V
1
1
0
5V
AVCC CONTROL SIGNALS
D8(SHDN)
D3
D2
1
0
1
0
1
1
3.5.6
BVCC CONTROL SIGNALS
OUTPUT
V_BVCC
1
1
1
0V
1
1
1
0V
0
X
X
Hi-Z
0
X
X
Hi-Z
Internal Ring Oscillator
The internal ring oscillator provides an internal clock source for the PCI6x21/PCI6x11 controller so that neither the
PCI clock nor an external clock is required in order for the PCI6x21/PCI6x11 controller to power down a socket or
interrogate a PC Card. This internal oscillator, operating nominally at 16 kHz, is always enabled.
3.5.7
Integrated Pullup Resistors for PC Card Interface
The PC Card Standard requires pullup resistors on various terminals to support both CardBus and 16-bit PC Card
configurations. The PCI6x21/PCI6x11 controller has integrated all of these pullup resistors and requires no additional
external components. The I/O buffer on the BVD1(STSCHG)/CSTSCHG terminal has the capability to switch to an
internal pullup resistor when a 16-bit PC Card is inserted, or switch to an internal pulldown resistor when a CardBus
card is inserted. This prevents inadvertent CSTSCHG events. The pullup resistor requirements for the various
UltraMedia interfaces are either included in the UltraMedia cards (or the UltraMedia adapter) or are part of the existing
PCMCIA architecture. The PCI6x21/PCI6x11 controller does not require any additional components for UltraMedia
support.
3.5.8
SPKROUT and CAUDPWM Usage
The SPKROUT terminal carries the digital audio signal from the PC Card to the system. When a 16-bit PC Card is
configured for I/O mode, the BVD2 terminal becomes the SPKR input terminal from the card. This terminal, in
CardBus applications, is referred to as CAUDIO. SPKR passes a TTL-level binary audio signal to the
PCI6x21/PCI6x11 controller. The CardBus CAUDIO signal also can pass a single-amplitude binary waveform as well
as a PWM signal. The binary audio signal from each PC Card sockets is enabled by bit 1 (SPKROUTEN) of the card
control register (PCI offset 91h, see Section 4.38).
Older controllers support CAUDIO in binary or PWM mode, but use the same output terminal (SPKROUT). Some
audio chips may not support both modes on one terminal and may have a separate terminal for binary and PWM.
The PCI6x21/PCI6x11 implementation includes a signal for PWM, CAUDPWM, which can be routed to an MFUNC
terminal. Bit 2 (AUD2MUX), located in the card control register, is programmed to route a CardBus CAUDIO PWM
terminal to CAUDPWM. See Section 4.36, Multifunction Routing Register, for details on configuring the MFUNC
terminals.
Figure 3−4 illustrates the SPKROUT connection.
3−7
System
Core Logic
BINARY_SPKR
SPKROUT
PCI6x21/
PCI6x11
Speaker
Subsystem
CAUDPWM
PWM_SPKR
Figure 3−4. SPKROUT Connection to Speaker Driver
3.5.9
LED Socket Activity Indicators
The socket activity LEDs are provided to indicate when a PC Card is being accessed. The LEDA1 and LEDA2 signals
can be routed to the multifunction terminals. When configured for LED outputs, these terminals output an active high
signal to indicate socket activity. LEDA1 indicates socket A (card A) activity, and LEDA2 indicates socket B (card B)
activity. The LED_SKT output indicates socket activity to either socket A or socket B. See Section 4.36, Multifunction
Routing Status Register, for details on configuring the multifunction terminals.
The active-high LED signal is driven for 64 ms. When the LED is not being driven high, it is driven to a low state. Either
of the two circuits shown in Figure 3−5 can be implemented to provide LED signaling, and the board designer must
implement the circuit that best fits the application.
The LED activity signals are valid when a card is inserted, powered, and not in reset. For PC Card-16, the LED activity
signals are pulsed when READY(IREQ) is low. For CardBus cards, the LED activity signals are pulsed if CFRAME,
IRDY, or CREQ are active.
Current Limiting
R ≈ 150 Ω
MFUNCx
PCI6x21/
PCI6x11
MFUNCy
Current Limiting
R ≈ 150 Ω
Socket A
LED
Socket B
LED
Figure 3−5. Two Sample LED Circuits
As indicated, the LED signals are driven for a period of 64 ms by a counter circuit. To avoid the possibility of the LEDs
appearing to be stuck when the PCI clock is stopped, the LED signaling is cut off when the SUSPEND signal is
asserted, when the PCI clock is to be stopped during the clock run protocol, or when in the D2 or D1 power state.
If any additional socket activity occurs during this counter cycle, then the counter is reset and the LED signal remains
driven. If socket activity is frequent (at least once every 64 ms), then the LED signals remain driven.
3.5.10 CardBus Socket Registers
The PCI6x21/PCI6x11 controller contains all registers for compatibility with the PCI Local Bus Specification and the
PC Card Standard. These registers, which exist as the CardBus socket registers, are listed in Table 3−6.
3−8
Table 3−6. CardBus Socket Registers
REGISTER NAME
OFFSET
Socket event
00h
Socket mask
04h
Socket present state
08h
Socket force event
0Ch
Socket control
10h
Reserved
Socket power management
14h−1Ch
20h
3.5.11 48-MHz Clock Requirements
The PCI6x21/PCI6x11 controller is designed to use an external 48-MHz clock connected to the CLK_48 terminal to
provide the reference for an internal oscillator circuit. This oscillator in turn drives a PLL circuit that generates the
various clocks required for the flash media function (Function 3) of the PCI6x21/PCI6x11 controller.
The 48-MHz clock must maintain a frequency of 48 MHz ± 0.8% over normal operating conditions. This clock must
maintain a duty cycle of 40% − 60%. The PCI6x21/PCI6x11 controller requires that the 48-MHz clock be running and
stable (a minimum of 10 clock pulses) before a GRST deassertion.
The following are typical specifications for crystals used with the PCI6x21/PCI6x11 controller in order to achieve the
required frequency accuracy and stability.
•
Crystal mode of operation: Fundamental
•
Frequency tolerance @ 25°C: Total frequency variation for the complete circuit is ±100 ppm. A crystal with
±30 ppm frequency tolerance is recommended for adequate margin.
•
Frequency stability (over temperature and age): A crystal with ±30 ppm frequency stability is recommended
for adequate margin.
NOTE: The total frequency variation must be kept below ±100 ppm from nominal with some
allowance for error introduced by board and device variations. Trade-offs between frequency
tolerance and stability may be made as long as the total frequency variation is less than
±100 ppm. For example, the frequency tolerance of the crystal may be specified at 50 ppm and
the temperature tolerance may be specified at 30 ppm to give a total of 80 ppm possible
variation due to the crystal alone. Crystal aging also contributes to the frequency variation.
3.6 Serial EEPROM Interface
The PCI6x21/PCI6x11 controller has a dedicated serial bus interface that can be used with an EEPROM to load
certain registers in the PCI6x21/PCI6x11 controller. The EEPROM is detected by a pullup resistor on the SCL
terminal. See Table 3−8 for the EEPROM loading map.
3.6.1
Serial-Bus Interface Implementation
The PCI6x21/PCI6x11 controller drives SCL at nearly 100 kHz during data transfers, which is the maximum specified
frequency for standard mode I2C. The serial EEPROM must be located at address A0h.
Some serial device applications may include PC Card power switches, card ejectors, or other devices that may
enhance the user’s PC Card experience. The serial EEPROM device and PC Card power switches are discussed
in the sections that follow.
3.6.2
Accessing Serial-Bus Devices Through Software
The PCI6x21/PCI6x11 controller provides a programming mechanism to control serial bus devices through software.
The programming is accomplished through a doubleword of PCI configuration space at offset B0h. Table 3−7 lists
the registers used to program a serial-bus device through software.
3−9
Table 3−7. PCI6x21/PCI6x11 Registers Used to Program Serial-Bus Devices
PCI OFFSET
REGISTER NAME
DESCRIPTION
B0h
Serial-bus data
Contains the data byte to send on write commands or the received data byte on read commands.
B1h
Serial-bus index
The content of this register is sent as the word address on byte writes or reads. This register is not used
in the quick command protocol.
B2h
Serial-bus slave
address
Write transactions to this register initiate a serial-bus transaction. The slave device address and the
R/W command selector are programmed through this register.
B3h
Serial-bus control
and status
Read data valid, general busy, and general error status are communicated through this register. In
addition, the protocol-select bit is programmed through this register.
3.6.3
Serial-Bus Interface Protocol
The SCL and SDA signals are bidirectional, open-drain signals and require pullup resistors as shown in Figure 3−3.
The PCI6x21/PCI6x11 controller, which supports up to 100-Kb/s data-transfer rate, is compatible with standard mode
I2C using 7-bit addressing.
All data transfers are initiated by the serial bus master. The beginning of a data transfer is indicated by a start
condition, which is signaled when the SDA line transitions to the low state while SCL is in the high state, as shown
in Figure 3−6. The end of a requested data transfer is indicated by a stop condition, which is signaled by a low-to-high
transition of SDA while SCL is in the high state, as shown in Figure 3−6. Data on SDA must remain stable during the
high state of the SCL signal, as changes on the SDA signal during the high state of SCL are interpreted as control
signals, that is, a start or a stop condition.
SDA
SCL
Start
Condition
Stop
Condition
Change of
Data Allowed
Data Line Stable,
Data Valid
Figure 3−6. Serial-Bus Start/Stop Conditions and Bit Transfers
Data is transferred serially in 8-bit bytes. The number of bytes that may be transmitted during a data transfer is
unlimited; however, each byte must be completed with an acknowledge bit. An acknowledge (ACK) is indicated by
the receiver pulling the SDA signal low, so that it remains low during the high state of the SCL signal. Figure 3−7
illustrates the acknowledge protocol.
SCL From
Master
1
2
3
7
SDA Output
By Transmitter
SDA Output
By Receiver
Figure 3−7. Serial-Bus Protocol Acknowledge
3−10
8
9
The PCI6x21/PCI6x11 controller is a serial bus master; all other devices connected to the serial bus external to the
PCI6x21/PCI6x11 controller are slave devices. As the bus master, the PCI6x21/PCI6x11 controller drives the SCL
clock at nearly 100 kHz during bus cycles and places SCL in a high-impedance state (zero frequency) during idle
states.
Typically, the PCI6x21/PCI6x11 controller masters byte reads and byte writes under software control. Doubleword
reads are performed by the serial EEPROM initialization circuitry upon a PCI reset and may not be generated under
software control. See Section 3.6.4, Serial-Bus EEPROM Application, for details on how the PCI6x21/PCI6x11
controller automatically loads the subsystem identification and other register defaults through a serial-bus EEPROM.
Figure 3−8 illustrates a byte write. The PCI6x21/PCI6x11 controller issues a start condition and sends the 7-bit slave
device address and the command bit zero. A 0 in the R/W command bit indicates that the data transfer is a write. The
slave device acknowledges if it recognizes the address. If no acknowledgment is received by the PCI6x21/PCI6x11
controller, then an appropriate status bit is set in the serial-bus control/status register (PCI offset B3h, see
Section 4.50). The word address byte is then sent by the PCI6x21/PCI6x11 controller, and another slave
acknowledgment is expected. Then the PCI6x21/PCI6x11 controller delivers the data byte MSB first and expects a
final acknowledgment before issuing the stop condition.
Slave Address
S
Word Address
b6 b5 b4 b3 b2 b1 b0
0
A
Data Byte
b7 b6 b5 b4 b3 b2 b1 b0
A b7 b6 b5 b4 b3 b2 b1 b0
A
P
R/W
A = Slave Acknowledgement
S/P = Start/Stop Condition
Figure 3−8. Serial-Bus Protocol—Byte Write
Figure 3−9 illustrates a byte read. The read protocol is very similar to the write protocol, except the R/W command
bit must be set to 1 to indicate a read-data transfer. In addition, the PCI6x21/PCI6x11 master must acknowledge
reception of the read bytes from the slave transmitter. The slave transmitter drives the SDA signal during read data
transfers. The SCL signal remains driven by the PCI6x21/PCI6x11 master.
Slave Address
S
Start
Word Address
b6 b5 b4 b3 b2 b1 b0
0
R/W
A
b7 b6 b5 b4 b3 b2 b1 b0
Slave Address
A
S
b6 b5 b4 b3 b2 b1 b0
Restart
1
A
R/W
Data Byte
b7 b6 b5 b4 b3 b2 b1 b0
M
P
Stop
A = Slave Acknowledgement
M = Master Acknowledgement
S/P = Start/Stop Condition
Figure 3−9. Serial-Bus Protocol—Byte Read
Figure 3−10 illustrates EEPROM interface doubleword data collection protocol.
3−11
Slave Address
S
1
0
1
0
0
Word Address
0
0
Start
0
A
Slave Address
b7 b6 b5 b4 b3 b2 b1 b0
M
A = Slave Acknowledgement
S
1
0
1
0
0
Data Byte 2
M
Data Byte 1
M = Master Acknowledgement
M
Data Byte 0
0
0
1
A
R/W
Restart
R/W
Data Byte 3
A
M
P
S/P = Start/Stop Condition
Figure 3−10. EEPROM Interface Doubleword Data Collection
3.6.4
Serial-Bus EEPROM Application
When the PCI bus is reset and the serial-bus interface is detected, the PCI6x21/PCI6x11 controller attempts to read
the subsystem identification and other register defaults from a serial EEPROM.
This format must be followed for the PCI6x21/PCI6x11 controller to load initializations from a serial EEPROM. All bit
fields must be considered when programming the EEPROM.
The serial EEPROM is addressed at slave address 1010 000b by the PCI6x21/PCI6x11 controller. All hardware
address bits for the EEPROM must be tied to the appropriate level to achieve this address. The serial EEPROM chip
in the sample application (Figure 3−10) assumes the 1010b high-address nibble. The lower three address bits are
terminal inputs to the chip, and the sample application shows these terminal inputs tied to GND.
3−12
Table 3−8. EEPROM Loading Map
SERIAL ROM
OFFSET
BYTE DESCRIPTION
00h
CardBus function indicator (00h)
01h
Number of bytes (20h)
PCI 04h, command register, function 0, bits 8, 6−5, 2−0
02h
[7]
[6]
[5]
[4:3]
[2]
[1]
[0]
Command
register, bit 8
Command
register, bit 6
Command
register, bit 5
RSVD
Command
register, bit 2
Command
register, bit 1
Command
register, bit 0
[7]
[6]
[5]
[4:3]
[2]
[1]
[0]
Command
register, bit 8
Command
register, bit 6
Command
register, bit 5
RSVD
Command
register, bit 2
Command
register, bit 1
Command
register, bit 0
PCI 04h, command register, function 1, bits 8, 6−5, 2−0
03h
04h
PCI 40h, subsystem vendor ID, byte 0
05h
PCI 41h, subsystem vendor ID, byte 1
06h
PCI 42h, subsystem ID, byte 0
07h
PCI 43h, subsystem ID, byte 1
08h
PCI 44h, PC Card 16-bit I/F legacy mode base address register, byte 0, bits 7−1
09h
PCI 45h, PC Card 16-bit I/F legacy mode base address register, byte 1
0Ah
PCI 46h, PC Card 16-bit I/F legacy mode base address register, byte 2
0Bh
PCI 47h, PC Card 16-bit I/F legacy mode base address register, byte 3
0Ch
PCI 80h, system control, function 0, byte 0, bits 6−0
0Dh
PCI 80h, system control, function 1, byte 0, bit 2
0Eh
PCI 81h, system control, byte 1, bits 7,6
0Fh
Reserved nonloadable (PCI 82h, system control, byte 2)
10h
PCI 83h, system control, byte 3, bits 7−2, 0
11h
PCI 8Ch, MFUNC routing, byte 0
12h
PCI 8Dh, MFUNC routing, byte 1
13h
PCI 8Eh, MFUNC routing, byte 2
14h
PCI 8Fh, MFUNC routing, byte 3
15h
PCI 90h, retry status, bits 7, 6
16h
PCI 91h, card control, bit 7
17h
PCI 92h, device control, bits 6, 5, 3−0 (bit 0 must be programmed to 0)
18h
PCI 93h, diagnostic, bits 4−0
19h
PCI A2h, power-management capabilities, function 0, bit 15 (bit 7 of EEPROM offset 16h corresponds to bit 15)
1Ah
PCI A2h, power-management capabilities, function 1, bit 15 (bit 7 of EEPROM offset 16h corresponds to bit 15)
1Bh
CB Socket + 0Ch, function 0 socket force event, bit 27 (bit 3 of EEPROM offset 17h corresponds to bit 27)
1Ch
CB Socket + 0Ch, function 1 socket force event, bit 27 (bit 3 of EEPROM offset 18h corresponds to bit 27)
1Dh
ExCA 00h, ExCA identification and revision, bits 7−0
1Eh
PCI 86h, general control, byte 0, bits 7−0
1Fh
PCI 87h, general control, byte 1, bits 7, 6 (can only be set to 1 if bits 1:0 = 01), 4−0
20h
PCI 89h, GPE enable, bits 7, 6, 4−0
21h
PCI 8Bh, general-purpose output, bits 4−0
22h−3Ah
Reserved
3−13
Table 3−8. EEPROM Loading Map (Continued)
SERIAL ROM
OFFSET
BYTE DESCRIPTION
3Bh
Flash media core function indicator (03h)
3−14
3Ch
Number of bytes (05h)
3Dh
PCI 2Ch, subsystem vendor ID, byte 0
3Eh
PCI 2Dh, subsystem vendor ID, byte 1
3Fh
PCI 2Eh, subsystem ID, byte 0
40h
PCI 2Fh, subsystem ID, byte 1
41h
PCI 4Ch, general control, bits 6−4, 2−0
42h
SD host controller function indicator (03h)
43h
Number of bytes (0Bh)
44h
PCI 2Ch, subsystem vendor ID, byte 0
45h
PCI 2Dh, subsystem vendor ID, byte 1
46h
PCI 2Eh, subsystem ID, byte 0
47h
PCI 2Fh, subsystem ID, byte 1
48h
PCI 88h, general control bits 6−4, 0
49h
PCI 94h, slot 0 3.3 V maximum current
4Ah
PCI 98h, slot 1 3.3 V maximum current
4Bh
PCI 9Ch, slot 2 3.3 V maximum current
4Ch
Reserved (PCI A0h, slot 3 3.3 V maximum current)
4Dh
Reserved (PCI A4h, slot 4 3.3 V maximum current)
4Eh
Reserved (PCI A8h, slot 5 3.3 V maximum current)
4Fh
PCI Smart Card function indicator (05h)
50h
Number of bytes (0Eh)
51h
PCI 09h, class code, byte 0
52h
PCI 0Ah, class code, byte 1
53h
PCI 0Bh, class code, byte 2
54h
PCI 2Ch, subsystem vendor ID, byte 0
55h
PCI 2Dh, subsystem vendor ID, byte 1
56h
PCI 2Eh, subsystem ID, byte 0
57h
PCI 2Fh, subsystem ID, byte 1
58h
PCI 4Ch, general control bits 6−4
59h
PCI 58h, Smart Card configuration 1, byte 0, bits 6−4, 2−0
5Ah
PCI 59h, Smart Card configuration 1, byte 1, bits 6−4, 2−0
5Bh
PCI 5Ah, Smart Card configuration 1, byte 2, bits 6−4, 2−0
5Ch
PCI 5Bh, Smart Card configuration 1, byte 3, bits 7−4, 2−0
5Dh
PCI 5Ch, Smart Card configuration 2, byte 0
5Eh
PCI 5Dh, Smart Card configuration 2, byte 1
5Fh
End-of-list indicator (80h)
3.7 Programmable Interrupt Subsystem
Interrupts provide a way for I/O devices to let the microprocessor know that they require servicing. The dynamic
nature of PC Cards and the abundance of PC Card I/O applications require substantial interrupt support from the
PCI6x21/PCI6x11 controller. The PCI6x21/PCI6x11 controller provides several interrupt signaling schemes to
accommodate the needs of a variety of platforms. The different mechanisms for dealing with interrupts in this
controller are based on various specifications and industry standards. The ExCA register set provides interrupt
control for some 16-bit PC Card functions, and the CardBus socket register set provides interrupt control for the
CardBus PC Card functions. The PCI6x21/PCI6x11 controller is, therefore, backward compatible with existing
interrupt control register definitions, and new registers have been defined where required.
The PCI6x21/PCI6x11 controller detects PC Card interrupts and events at the PC Card interface and notifies the host
controller using one of several interrupt signaling protocols. To simplify the discussion of interrupts in the
PCI6x21/PCI6x11 controller, PC Card interrupts are classified either as card status change (CSC) or as functional
interrupts.
The method by which any type of PCI6x21/PCI6x11 interrupt is communicated to the host interrupt controller varies
from system to system. The PCI6x21/PCI6x11 controller offers system designers the choice of using parallel PCI
interrupt signaling, parallel ISA-type IRQ interrupt signaling, or the IRQSER serialized ISA and/or PCI interrupt
protocol. It is possible to use the parallel PCI interrupts in combination with either parallel IRQs or serialized IRQs,
as detailed in the sections that follow. All interrupt signaling is provided through the seven multifunction terminals,
MFUNC0−MFUNC6.
3.7.1
PC Card Functional and Card Status Change Interrupts
PC Card functional interrupts are defined as requests from a PC Card application for interrupt service and are
indicated by asserting specially-defined signals on the PC Card interface. Functional interrupts are generated by
16-bit I/O PC Cards and by CardBus PC Cards.
Card status change (CSC)-type interrupts are defined as events at the PC Card interface that are detected by the
PCI6x21/PCI6x11 controller and may warrant notification of host card and socket services software for service. CSC
events include both card insertion and removal from PC Card sockets, as well as transitions of certain PC Card
signals.
Table 3−9 summarizes the sources of PC Card interrupts and the type of card associated with them. CSC and
functional interrupt sources are dependent on the type of card inserted in the PC Card socket. The four types of cards
that can be inserted into any PC Card socket are:
•
•
•
•
16-bit memory card
16-bit I/O card
CardBus cards
UltraMedia card
3−15
Table 3−9. Interrupt Mask and Flag Registers
CARD TYPE
16-bit memory
16-bit I/O
16-bit I/O/
UltraMedia
All 16-bit PC
Cards/
Smart Card
adapters/
UltraMedia/
Flash Media
CardBus
EVENT
MASK
FLAG
Battery conditions (BVD1, BVD2)
ExCA offset 05h/45h/805h bits 1 and 0
ExCA offset 04h/44h/804h bits 1 and 0
Wait states (READY)
ExCA offset 05h/45h/805h bit 2
ExCA offset 04h/44h/804h bit 2
Change in card status (STSCHG)
ExCA offset 05h/45h/805h bit 0
ExCA offset 04h/44h/804h bit 0
Interrupt request (IREQ)
Always enabled
PCI configuration offset 91h bit 0
Power cycle complete
ExCA offset 05h/45h/805h bit 3
ExCA offset 04h/44h/804h bit 3
Change in card status (CSTSCHG)
Socket mask bit 0
Socket event bit 0
Interrupt request (CINT)
Always enabled
PCI configuration offset 91h bit 0
Power cycle complete
Socket mask bit 3
Socket event bit 3
Card insertion or removal
Socket mask bits 2 and 1
Socket event bits 2 and 1
Functional interrupt events are valid only for 16-bit I/O and CardBus cards; that is, the functional interrupts are not
valid for 16-bit memory cards. Furthermore, card insertion and removal-type CSC interrupts are independent of the
card type.
Table 3−10. PC Card Interrupt Events and Description
CARD TYPE
EVENT
TYPE
SIGNAL
DESCRIPTION
BVD1(STSCHG)//CSTSCHG
A transition on BVD1 indicates a change in the
PC Card battery conditions.
BVD2(SPKR)//CAUDIO
A transition on BVD2 indicates a change in the
PC Card battery conditions.
Battery conditions
(BVD1, BVD2)
CSC
Wait states
(READY)
CSC
READY(IREQ)//CINT
16-bit I/O
Change in card
status (STSCHG)
CSC
BVD1(STSCHG)//CSTSCHG
The assertion of STSCHG indicates a status change
on the PC Card.
16-bit I/O/
UltraMedia
Interrupt request
(IREQ)
Functional
READY(IREQ)//CINT
The assertion of IREQ indicates an interrupt request
from the PC Card.
Change in card
status (CSTSCHG)
CSC
BVD1(STSCHG)//CSTSCHG
Interrupt request
(CINT)
Functional
READY(IREQ)//CINT
Card insertion
or removal
CSC
CD1//CCD1,
CD2//CCD2
Power cycle
complete
CSC
N/A
16-bit
memory
CardBus
All PC Cards/
Smart Card
adapters/
UltraMedia/
Flash Media
A transition on READY indicates a change in the
ability of the memory PC Card to accept or provide
data.
The assertion of CSTSCHG indicates a status
change on the PC Card.
The assertion of CINT indicates an interrupt request
from the PC Card.
A transition on either CD1//CCD1 or CD2//CCD2
indicates an insertion or removal of a 16-bit or
CardBus PC Card.
An interrupt is generated when a PC Card power-up
cycle has completed.
The naming convention for PC Card signals describes the function for 16-bit memory, I/O cards, and CardBus. For
example, READY(IREQ)//CINT includes READY for 16-bit memory cards, IREQ for 16-bit I/O cards, and CINT for
CardBus cards. The 16-bit memory card signal name is first, with the I/O card signal name second, enclosed in
parentheses. The CardBus signal name follows after a double slash (//).
The 1997 PC Card Standard describes the power-up sequence that must be followed by the PCI6x21/PCI6x11
controller when an insertion event occurs and the host requests that the socket VCC and VPP be powered. Upon
completion of this power-up sequence, the PCI6x21/PCI6x11 interrupt scheme can be used to notify the host system
(see Table 3−10), denoted by the power cycle complete event. This interrupt source is considered a
3−16
PCI6x21/PCI6x11 internal event, because it depends on the completion of applying power to the socket rather than
on a signal change at the PC Card interface.
3.7.2
Interrupt Masks and Flags
Host software may individually mask (or disable) most of the potential interrupt sources listed in Table 3−10 by setting
the appropriate bits in the PCI6x21/PCI6x11 controller. By individually masking the interrupt sources listed, software
can control those events that cause a PCI6x21/PCI6x11 interrupt. Host software has some control over the system
interrupt the PCI6x21/PCI6x11 controller asserts by programming the appropriate routing registers. The
PCI6x21/PCI6x11 controller allows host software to route PC Card CSC and PC Card functional interrupts to separate
system interrupts. Interrupt routing somewhat specific to the interrupt signaling method used is discussed in more
detail in the following sections.
When an interrupt is signaled by the PCI6x21/PCI6x11 controller, the interrupt service routine must determine which
of the events listed in Table 3−9 caused the interrupt. Internal registers in the PCI6x21/PCI6x11 controller provide
flags that report the source of an interrupt. By reading these status bits, the interrupt service routine can determine
the action to be taken.
Table 3−9 details the registers and bits associated with masking and reporting potential interrupts. All interrupts can
be masked except the functional PC Card interrupts, and an interrupt status flag is available for all types of interrupts.
Notice that there is not a mask bit to stop the PCI6x21/PCI6x11 controller from passing PC Card functional interrupts
through to the appropriate interrupt scheme. These interrupts are not valid until the card is properly powered, and
there must never be a card interrupt that does not require service after proper initialization.
Table 3−9 lists the various methods of clearing the interrupt flag bits. The flag bits in the ExCA registers (16-bit PC
Card-related interrupt flags) can be cleared using two different methods. One method is an explicit write of 1 to the
flag bit to clear and the other is by reading the flag bit register. The selection of flag bit clearing methods is made by
bit 2 (IFCMODE) in the ExCA global control register (ExCA offset 1Eh/5Eh/81Eh, see Section 5.20), and defaults to
the flag-cleared-on-read method.
The CardBus-related interrupt flags can be cleared by an explicit write of 1 to the interrupt flag in the socket event
register (see Section 6.1). Although some of the functionality is shared between the CardBus registers and the ExCA
registers, software must not program the chip through both register sets when a CardBus card is functioning.
3.7.3
Using Parallel IRQ Interrupts
The seven multifunction terminals, MFUNC6−MFUNC0, implemented in the PCI6x21/PCI6x11 controller can be
routed to obtain a subset of the ISA IRQs. The IRQ choices provide ultimate flexibility in PC Card host interruptions.
To use the parallel ISA-type IRQ interrupt signaling, software must program the device control register (PCI offset
92h, see Section 4.39), to select the parallel IRQ signaling scheme. See Section 4.36, Multifunction Routing Status
Register, for details on configuring the multifunction terminals.
A system using parallel IRQs requires (at a minimum) one PCI terminal, INTA, to signal CSC events. This requirement
is dictated by certain card and socket-services software. The INTA requirement calls for routing the MFUNC0 terminal
for INTA signaling. The INTRTIE bit is used, in this case, to route socket interrupt events to INTA. This leaves (at a
maximum) six different IRQs to support legacy 16-bit PC Card functions.
As an example, suppose the six IRQs used by legacy PC Card applications are IRQ3, IRQ4, IRQ5, IRQ9, IRQ10,
and IRQ15. The multifunction routing status register must be programmed to a value of 0A9F 5432h. This value
routes the MFUNC0 terminal to INTA signaling and routes the remaining terminals as illustrated in Figure 3−11. Not
shown is that INTA must also be routed to the programmable interrupt controller (PIC), or to some circuitry that
provides parallel PCI interrupts to the host.
3−17
PCI6x21/PCI6x11
MFUNC1
IRQ3
PIC
MFUNC2
IRQ4
MFUNC3
IRQ5
MFUNC4
IRQ15
MFUNC5
IRQ9
MFUNC6
IRQ10
Figure 3−11. IRQ Implementation
Power-on software is responsible for programming the multifunction routing status register to reflect the IRQ
configuration of a system implementing the PCI6x21/PCI6x11 controller. The multifunction routing status register is
a global register that is shared between the four PCI6x21/PCI6x11 functions. See Section 4.36, Multifunction Routing
Status Register, for details on configuring the multifunction terminals.
The parallel ISA-type IRQ signaling from the MFUNC6−MFUNC0 terminals is compatible with the input signal
requirements of the 8259 PIC. The parallel IRQ option is provided for system designs that require legacy ISA IRQs.
Design constraints may demand more MFUNC6−MFUNC0 IRQ terminals than the PCI6x21/PCI6x11 controller
makes available.
3.7.4
Using Parallel PCI Interrupts
Parallel PCI interrupts are available when exclusively in parallel PCI interrupt/parallel ISA IRQ signaling mode, and
when only IRQs are serialized with the IRQSER protocol. The INTA, INTB, INTC, and INTD can be routed to MFUNC
terminals (MFUNC0, MFUNC1, MFUNC2, and MFUNC4). If bit 29 (INTRTIE) is set in the system control register (PCI
offset 80h, see Section 4.29), then INTA and INTB are tied internally. When the TIEALL bit is set, all four functions
return a value of 01h on reads from the interrupt pin register for both parallel and serial PCI interrupts.
The INTRTIE and TIEALL bits affect the read-only value provided through accesses to the interrupt pin register (PCI
offset 3Dh, see Section 4.24). Table 3−11 summarizes the interrupt signaling modes.
Table 3−11. Interrupt Pin Register Cross Reference
INTRTIE
Bit
TIEALL
Bit
INTPIN
Function 0
(CardBus)
INTPIN
Function 1
(CardBus)
INTPIN
Function 3
(Flash Media)
INTPIN
Function 4
(SD Host)
INTPIN
Function 5
(Smart Card)
0
0
0x01 (INTA)
0x02 (INTB)
1
0
0x01 (INTA)
0x01 (INTA)
Determined by bits 6−5
(INT_SEL field) in flash
media general control
register (see Section 7.21)
Determined by bits 6−5
(INT_SEL field) in SD host
general control register
(see Section 8.22)
Determined by bits 6−5
(INT_SEL field) in Smart
Card general control
register (see Section 9.22)
X
1
0x01 (INTA)
0x01 (INTA)
0x01 (INTA)
0x01 (INTA)
0x01 (INTA)
3.7.5
Using Serialized IRQSER Interrupts
The serialized interrupt protocol implemented in the PCI6x21/PCI6x11 controller uses a single terminal to
communicate all interrupt status information to the host controller. The protocol defines a serial packet consisting of
a start cycle, multiple interrupt indication cycles, and a stop cycle. All data in the packet is synchronous with the PCI
clock. The packet data describes 16 parallel ISA IRQ signals and the optional 4 PCI interrupts INTA, INTB, INTC, and
INTD. For details on the IRQSER protocol, refer to the document Serialized IRQ Support for PCI Systems.
3.7.6
SMI Support in the PCI6x21/PCI6x11 Controller
The PCI6x21/PCI6x11 controller provides a mechanism for interrupting the system when power changes have been
made to the PC Card socket interfaces. The interrupt mechanism is designed to fit into a system maintenance
interrupt (SMI) scheme. SMI interrupts are generated by the PCI6x21/PCI6x11 controller, when enabled, after a write
cycle to either the socket control register (CB offset 10h, see Section 6.5) of the CardBus register set, or the ExCA
power control register (ExCA offset 02h/42h/802h, see Section 5.3) causes a power cycle change sequence to be
sent on the power switch interface.
3−18
The SMI control is programmed through three bits in the system control register (PCI offset 80h, see Section 4.29).
These bits are SMIROUTE (bit 26), SMISTATUS (bit 25), and SMIENB (bit 24). Table 3−12 describes the SMI control
bits function.
Table 3−12. SMI Control
BIT NAME
FUNCTION
SMIROUTE
This shared bit controls whether the SMI interrupts are sent as a CSC interrupt or as IRQ2.
SMISTAT
This socket-dependent bit is set when an SMI interrupt is pending. This status flag is cleared by writing back a 1.
SMIENB
When set, SMI interrupt generation is enabled. This bit is shared by functions 0 and 1.
If CSC SMI interrupts are selected, then the SMI interrupt is sent as the CSC on a per-socket basis. The CSC interrupt
can be either level or edge mode, depending upon the CSCMODE bit in the ExCA global control register (ExCA offset
1Eh/5Eh/81Eh, see Section 5.20).
If IRQ2 is selected by SMIROUTE, then the IRQSER signaling protocol supports SMI signaling in the IRQ2 IRQ/Data
slot. In a parallel ISA IRQ system, the support for an active low IRQ2 is provided only if IRQ2 is routed to either
MFUNC3 or MFUNC6 through the multifunction routing status register (PCI offset 8Ch, see Section 4.36).
3.8 Power Management Overview
In addition to the low-power CMOS technology process used for the PCI6x21/PCI6x11 controller, various features
are designed into the controller to allow implementation of popular power-saving techniques. These features and
techniques are as follows:
•
•
•
•
•
•
•
•
Clock run protocol
Cardbus PC Card power management
16-bit PC Card power management
Suspend mode
Ring indicate
PCI power management
Cardbus bridge power management
ACPI support
3−19
PCI Bus
EEPROM
SD/MMC
MS/MSPRO
SM/xD
PCI6x21/
PCI6x11
SD/MMC
Power Switch
Power Switch
Power
Switch
PC
Card/
UltraMedia
Card
PC
Card/
UltraMedia
Card
† The system connection to GRST is implementation-specific. GRST must be asserted on initial power up of the PCI6x21/PCI6x11 controller. PRST
must be asserted for subsequent warm resets.
Figure 3−12. System Diagram Implementing CardBus Device Class Power Management
3.8.1
Integrated Low-Dropout Voltage Regulator (LDO-VR)
The PCI6x21/PCI6x11 controller requires 1.5-V core voltage. The core power can be supplied by the
PCI6x21/PCI6x11 controller itself using the internal LDO-VR. The core power can alternatively be supplied by an
external power supply through the VR_PORT terminal. Table 3−13 lists the requirements for both the internal core
power supply and the external core power supply.
Table 3−13. Requirements for Internal/External 1.5-V Core Power Supply
SUPPLY
VR_EN
VR_PORT
Internal
VCC
3.3 V
GND
1.5-V output
Internal 1.5-V LDO-VR is enabled. A 1.0-µF bypass capacitor is required on the VR_PORT
terminal for decoupling. This output is not for external use.
External
3.3 V
VCC
1.5-V input
Internal 1.5-V LDO-VR is disabled. An external 1.5-V power supply, of minimum 50-mA
capacity, is required. A 0.1-µF bypass capacitor on the VR_PORT terminal is required.
3.8.2
NOTE
CardBus (Functions 0 and 1) Clock Run Protocol
The PCI CLKRUN feature is the primary method of power management on the PCI interface of the PCI6x21/PCI6x11
controller. CLKRUN signaling is provided through the MFUNC6 terminal. Since some chip sets do not implement
CLKRUN, this is not always available to the system designer, and alternate power-saving features are provided. For
details on the CLKRUN protocol see the PCI Mobile Design Guide.
The PCI6x21/PCI6x11 controller does not permit the central resource to stop the PCI clock under any of the following
conditions:
•
•
•
3−20
Bit 1 (KEEPCLK) in the system control register (PCI offset 80h, see Section 4.29) is set.
The 16-bit PC Card resource manager is busy.
The PCI6x21/PCI6x11 CardBus master state machine is busy. A cycle may be in progress on CardBus.
•
•
•
•
The PCI6x21/PCI6x11 master is busy. There may be posted data from CardBus to PCI in the
PCI6x21/PCI6x11 controller.
Interrupts are pending.
The CardBus CCLK for the socket has not been stopped by the PCI6x21/PCI6x11 CCLKRUN manager.
PC Card interrogation is in progress.
The PCI6x21/PCI6x11 controller restarts the PCI clock using the CLKRUN protocol under any of the following
conditions:
•
•
•
•
•
•
•
•
3.8.3
A 16-bit PC Card IREQ or a CardBus CINT has been asserted by either card.
A CardBus CBWAKE (CSTSCHG) or 16-bit PC Card STSCHG/RI event occurs in the socket.
A CardBus attempts to start the CCLK using CCLKRUN.
A CardBus card arbitrates for the CardBus bus using CREQ.
Bit 1 (KEEPCLK) in the system control register (PCI offset 80h, see Section 4.29) is set.
Data is in any of the FIFOs (receive or transmit).
The master state machine is busy.
There are pending interrupts.
CardBus PC Card Power Management
The PCI6x21/PCI6x11 controller implements its own card power-management engine that can turn off the CCLK to
a socket when there is no activity to the CardBus PC Card. The PCI clock-run protocol is followed on the CardBus
CCLKRUN interface to control this clock management.
3.8.4
16-Bit PC Card Power Management
The COE bit (bit 7) of the ExCA power control register (ExCA offset 02h/42h/802h, see Section 5.3) and PWRDWN
bit (bit 0) of the ExCA global control register (ExCA offset 1Eh/5Eh/81Eh, see Section 5.20) are provided for 16-bit
PC Card power management. The COE bit places the card interface in a high-impedance state to save power. The
power savings when using this feature are minimal. The COE bit resets the PC Card when used, and the PWRDWN
bit does not. Furthermore, the PWRDWN bit is an automatic COE, that is, the PWRDWN performs the COE function
when there is no card activity.
NOTE: The 16-bit PC Card must implement the proper pullup resistors for the COE and
PWRDWN modes.
3.8.5
Suspend Mode
The SUSPEND signal, provided for backward compatibility, gates the PRST (PCI reset) signal and the GRST (global
reset) signal from the PCI6x21/PCI6x11 controller. Besides gating PRST and GRST, SUSPEND also gates PCLK
inside the PCI6x21/PCI6x11 controller in order to minimize power consumption.
It should also be noted that asynchronous signals, such as card status change interrupts and RI_OUT, can be passed
to the host system without a PCI clock. However, if card status change interrupts are routed over the serial interrupt
stream, then the PCI clock must be restarted in order to pass the interrupt, because neither the internal oscillator nor
an external clock is routed to the serial-interrupt state machine. Figure 3−13 is a signal diagram of the suspend
function.
3−21
RESET
GNT
SUSPEND
PCLK
External Terminals
Internal Signals
RESETIN
SUSPENDIN
PCLKIN
Figure 3−13. Signal Diagram of Suspend Function
3.8.6
Requirements for Suspend Mode
The suspend mode prevents the clearing of all register contents on the assertion of reset (PRST or GRST) which
would require the reconfiguration of the PCI6x21/PCI6x11 controller by software. Asserting the SUSPEND signal
places the PCI outputs of the controller in a high-impedance state and gates the PCLK signal internally to the
controller unless a PCI transaction is currently in process (GNT is asserted). It is important that the PCI bus not be
parked on the PCI6x21/PCI6x11 controller when SUSPEND is asserted because the outputs are in a high-impedance
state.
The GPIOs, MFUNC signals, and RI_OUT signal are all active during SUSPEND, unless they are disabled in the
appropriate PCI6x21/PCI6x11 registers.
3.8.7
Ring Indicate
The RI_OUT output is an important feature in power management, allowing a system to go into a suspended mode
and wake-up on modem rings and other card events. TI-designed flexibility permits this signal to fit wide platform
requirements. RI_OUT on the PCI6x21/PCI6x11 controller can be asserted under any of the following conditions:
•
A 16-bit PC Card modem in a powered socket asserts RI to indicate to the system the presence of an
incoming call.
•
A powered down CardBus card asserts CSTSCHG (CBWAKE) requesting system and interface wake-up.
•
A powered CardBus card asserts CSTSCHG from the insertion/removal of cards or change in battery
voltage levels.
Figure 3−14 shows various enable bits for the PCI6x21/PCI6x11 RI_OUT function; however, it does not show the
masking of CSC events. See Table 3−9 for a detailed description of CSC interrupt masks and flags.
3−22
RI_OUT Function
CSTSMASK
PC Card
Socket A
RIENB
CSC
Card
I/F
PC Card
Socket B
RINGEN
RI_OUT
RI
CDRESUME
CSC
Figure 3−14. RI_OUT Functional Diagram
RI from the 16-bit PC Card interface is masked by bit 7 (RINGEN) in the ExCA interrupt and general control register
(ExCA offset 03h/43h/803h, see Section 5.4). This is programmed on a per-socket basis and is only applicable when
a 16-bit card is powered in the socket.
The CBWAKE signaling to RI_OUT is enabled through the same mask as the CSC event for CSTSCHG. The mask
bit (bit 0, CSTSMASK) is programmed through the socket mask register (CB offset 04h, see Section 6.2) in the
CardBus socket registers.
RI_OUT can be routed through any of three different pins, RI_OUT/PME, MFUNC2, or MFUNC4. The RI_OUT
function is enabled by setting bit 7 (RIENB) in the card control register (PCI offset 91h, see Section 4.38). The PME
function is enabled by setting bit 8 (PME_ENABLE) in the power-management control/status register (PCI offset A4h,
see Section 4.44). When bit 0 (RIMUX) in the system control register (PCI offset 80h, see Section 4.29) is set to 0,
both the RI_OUT function and the PME function are routed to the RI_OUT/PME terminal. If both functions are enabled
and RIMUX is set to 0, then the RI_OUT/PME terminal becomes RI_OUT only and PME assertions are never seen.
Therefore, in a system using both the RI_OUT function and the PME function, RIMUX must be set to 1 and RI_OUT
must be routed to either MFUNC2 or MFUNC4.
3.8.8
PCI Power Management
3.8.8.1 CardBus Power Management (Functions 0 and 1)
The PCI Bus Power Management Interface Specification for PCI to CardBus Bridges establishes the infrastructure
required to let the operating system control the power of PCI functions. This is done by defining a standard PCI
interface and operations to manage the power of PCI functions on the bus. The PCI bus and the PCI functions can
be assigned one of seven power-management states, resulting in varying levels of power savings.
The seven power-management states of PCI functions are:
•
•
•
•
•
•
•
D0-uninitialized − Before controller configuration, controller not fully functional
D0-active − Fully functional state
D1 − Low-power state
D2 − Low-power state
D3hot − Low-power state. Transition state before D3cold
D3cold − PME signal-generation capable. Main power is removed and VAUX is available.
D3off − No power and completely nonfunctional
NOTE 1: In the D0-uninitialized state, the PCI6x21/PCI6x11 controller does not generate PME and/or interrupts. When bits 0 (IO_EN) and 1
(MEM_EN) of the command register (PCI offset 04h, see Section 4.4) are both set, the PCI6x21/PCI6x11 controller switches the state
to D0-active. Transition from D3cold to the D0-uninitialized state happens at the deassertion of PRST. The assertion of GRST forces
the controller to the D0-uninitialized state immediately.
NOTE 2: The PWR_STATE bits (bits 1−0) of the power-management control/status register (PCI offset A4h, see Section 4.44) only code for four
power states, D0, D1, D2, and D3hot. The differences between the three D3 states is invisible to the software because the controller
is not accessible in the D3cold or D3off state.
3−23
Similarly, bus power states of the PCI bus are B0−B3. The bus power states B0−B3 are derived from the device power
state of the originating bridge device.
For the operating system (OS) to manage the controller power states on the PCI bus, the PCI function must support
four power-management operations. These operations are:
•
•
•
•
Capabilities reporting
Power status reporting
Setting the power state
System wake-up
The OS identifies the capabilities of the PCI function by traversing the new capabilities list. The presence of
capabilities in addition to the standard PCI capabilities is indicated by a 1 in bit 4 (CAPLIST) of the status register (PCI
offset 06h, see Section 4.5).
The capabilities pointer provides access to the first item in the linked list of capabilities. For the PCI6x21/PCI6x11
controller, a CardBus bridge with PCI configuration space header type 2, the capabilities pointer is mapped to an offset
of 14h. The first byte of each capability register block is required to be a unique ID of that capability. PCI power
management has been assigned an ID of 01h. The next byte is a pointer to the next pointer item in the list of
capabilities. If there are no more items in the list, then the next item pointer must be set to 0. The registers following
the next item pointer are specific to the capability of the function. The PCI power-management capability implements
the register block outlined in Table 3−14.
Table 3−14. Power-Management Registers
REGISTER NAME
Power-management capabilities
Data
Power-management control/status register bridge support extensions
OFFSET
Next item pointer
Capability ID
Power-management control/status (CSR)
A0h
A4h
The power-management capabilities register (PCI offset A2h, see Section 4.43) provides information on the
capabilities of the function related to power management. The power-management control/status register (PCI offset
A4h, see Section 4.44) enables control of power-management states and enables/monitors power-management
events. The data register is an optional register that can provide dynamic data.
For more information on PCI power management, see the PCI Bus Power Management Interface Specification for
PCI to CardBus Bridges.
3.8.8.2 Flash Media (Function 3) Power Management
The PCI Bus Power Management Interface Specification is applicable for the flash media dedicated sockets. This
function supports the D0 and D3 power states.
Table 3−15. Function 3 Power-Management Registers
REGISTER NAME
Power-management capabilities
Data
Power-management control/status register bridge support extensions
OFFSET
Next item pointer
Capability ID
Power-management control/status (CSR)
44h
48h
3.8.8.3 SD Host (Function 4) Power Management
The PCI Bus Power Management Interface Specification is applicable for the SD host dedicated sockets. This
function supports the D0 and D3 power states.
Table 3−16. Function 4 Power-Management Registers
REGISTER NAME
Power-management capabilities
Data
Power-management control/status register bridge support extensions
OFFSET
Next item pointer
Capability ID
Power-management control/status (CSR)
80h
84h
3.8.8.4 Smart Card (Function 5) Power Management
The PCI Bus Power Management Interface Specification is applicable for the Smart Card dedicated sockets. This
function supports the D0 and D3 power states.
3−24
Table 3−17. Function 5 Power-Management Registers
REGISTER NAME
OFFSET
Power-management capabilities
Data
3.8.9
Next item pointer
Power-management control/status register bridge support extensions
Capability ID
Power-management control/status (CSR)
44h
48h
CardBus Bridge Power Management
The PCI Bus Power Management Interface Specification for PCI to CardBus Bridges was approved by PCMCIA in
December of 1997. This specification follows the device and bus state definitions provided in the PCI Bus Power
Management Interface Specification published by the PCI Special Interest Group (SIG). The main issue addressed
in the PCI Bus Power Management Interface Specification for PCI to CardBus Bridges is wake-up from D3hot or D3cold
without losing wake-up context (also called PME context).
The specific issues addressed by the PCI Bus Power Management Interface Specification for PCI to CardBus Bridges
for D3 wake-up are as follows:
•
Preservation of device context. The specification states that a reset must occur during the transition from
D3 to D0. Some method to preserve wake-up context must be implemented so that the reset does not clear
the PME context registers.
•
Power source in D3cold if wake-up support is required from this state.
The Texas Instruments PCI6x21/PCI6x11 controller addresses these D3 wake-up issues in the following manner:
•
•
Two resets are provided to handle preservation of PME context bits:
−
Global reset (GRST) is used only on the initial boot up of the system after power up. It places the
PCI6x21/PCI6x11 controller in its default state and requires BIOS to configure the controller before
becoming fully functional.
−
PCI reset (PRST) has dual functionality based on whether PME is enabled or not. If PME is enabled,
then PME context is preserved. If PME is not enabled, then PRST acts the same as a normal PCI reset.
Please see the master list of PME context bits in Section 3.8.11.
Power source in D3cold if wake-up support is required from this state. Since VCC is removed in D3cold, an
auxiliary power source must be supplied to the PCI6x21/PCI6x11 VCC terminals. Consult the PCI14xx
Implementation Guide for D3 Wake-Up or the PCI Power Management Interface Specification for PCI to
CardBus Bridges for further information.
3.8.10 ACPI Support
The Advanced Configuration and Power Interface (ACPI) Specification provides a mechanism that allows unique
pieces of hardware to be described to the ACPI driver. The PCI6x21/PCI6x11 controller offers a generic interface that
is compliant with ACPI design rules.
Two doublewords of general-purpose ACPI programming bits reside in PCI6x21/PCI6x11 PCI configuration space
at offset 88h. The programming model is broken into status and control functions. In compliance with ACPI, the top
level event status and enable bits reside in the general-purpose event status register (PCI offset 88h, see
Section 4.32) and general-purpose event enable register (PCI offset 89h, see Section 4.33). The status and enable
bits are implemented as defined by ACPI and illustrated in Figure 3−15.
Status Bit
Event Input
Enable Bit
Event Output
Figure 3−15. Block Diagram of a Status/Enable Cell
The status and enable bits generate an event that allows the ACPI driver to call a control method associated with the
pending status bit. The control method can then control the hardware by manipulating the hardware control bits or
3−25
by investigating child status bits and calling their respective control methods. A hierarchical implementation would
be somewhat limiting, however, as upstream devices would have to remain in some level of power state to report
events.
For more information of ACPI, see the Advanced Configuration and Power Interface (ACPI) Specification.
3.8.11 Master List of PME Context Bits and Global Reset-Only Bits
PME context bit means that the bit is cleared only by the assertion of GRST when the PME enable bit, bit 8 of the
power management control/status register (PCI offset A4h, see Section 4.44) is set. If PME is not enabled, then these
bits are cleared when either PRST or GRST is asserted.
The PME context bits (functions 0 and 1) are:
•
•
•
•
•
•
•
•
•
•
•
•
Bridge control register (PCI offset 3Eh, see Section 4.25): bit 6
System control register (PCI offset 80h, see Section 4.29): bits 10−8
Power management control/status register (PCI offset A4h, see Section 4.44): bit 15
ExCA power control register (ExCA 802h/842h, see Section 5.3): bits 7, 5 (82365SL mode only), 4, 3, 1,
0
ExCA interrupt and general control (ExCA 803h/843h, see Section 5.4): bits 6, 5
ExCA card status-change register (ExCA 804h/844h, see Section 5.5): bits 3−0
ExCA card status-change interrupt configuration register (ExCA 805h/845h, see Section 5.6): bits 3−0
ExCA card detect and general control register (ExCA 816h/856h, see Section 5.19): bits 7, 6
Socket event register (CardBus offset 00h, see Section 6.1): bits 3−0
Socket mask register (CardBus offset 04h, see Section 6.2): bits 3−0
Socket present state register (CardBus offset 08h, see Section 6.3): bits 13−7, 5−1
Socket control register (CardBus offset 10h, see Section 6.5): bits 6−4, 2−0
Global reset-only bits, as the name implies, are cleared only by GRST. These bits are never cleared by PRST,
regardless of the setting of the PME enable bit. The GRST signal is gated only by the SUSPEND signal. This means
that assertion of SUSPEND blocks the GRST signal internally, thus preserving all register contents. Figure 3−12 is
a diagram showing the application of GRST and PRST.
The global reset-only bits (functions 0 and 1) are:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3−26
Status register (PCI offset 06h, see Section 4.5): bits 15−11, 8
Secondary status register (PCI offset 16h, see Section 4.14): bits 15−11, 8
Subsystem vendor ID register (PCI offset 40h, see Section 4.26): bits 15–0
Subsystem ID register (PCI offset 42h, see Section 4.27): bits 15–0
PC Card 16-bit I/F legacy-mode base-address register (PCI offset 44h, see Section 4.28): bits 31−0
System control register (PCI offset 80h, see Section 4.29): bits 31−24, 22−13, 11, 6−0
MC_CD debounce register (PCI offset 84h, see Section 4.30): bits 7−0
General control register (PCI offset 86h, see Section 4.31): bits 13−10, 7, 5−3, 1, 0
General-purpose event status register (PCI offset 88h, see Section 4.32): bits 7, 6, 4−0
General-purpose event enable register (PCI offset 89h, see Section 4.33): bits 7, 6, 4−0
General-purpose output register (PCI offset 8Bh, see Section 4.35): bits 4−0
Multifunction routing register (PCI offset 8Ch, see Section 4.36): bits 31−0
Retry status register (PCI offset 90h, see Section 4.37): bits 7−5, 3, 1
Card control register (PCI offset 91h, see Section 4.38): bits 7, 2−0
Device control register (PCI offset 92h, see Section 4.39): bits 7−5, 3−0
Diagnostic register (PCI offset 93h, see Section 4.40): bits 7−0
Power management capabilities register (PCI offset A2h, see Section 4.43): bit 15
Power management CSR register (PCI offset A4h, see Section 4.44): bits 15, 8
Serial bus data register (PCI offset B0h, see Section 4.47): bits 7−0
Serial bus index register (PCI offset B1h, see Section 4.48): bits 7−0
Serial bus slave address register (PCI offset B2h, see Section 4.49): bits 7−0
•
•
•
•
Serial bus control/status register (PCI offset B3h, see Section 4.50): bits 7, 3−0
ExCA identification and revision register (ExCA 800h/840h, see Section 5.1): bits 7−0
ExCA global control register (ExCA 81Eh/85Eh, see Section 5.20): bits 2−0
CardBus socket power management register (CardBus 20h, see Section 6.6): bits 25, 24
The global reset-only (function 3) register bits:
•
•
•
•
•
Subsystem vendor ID register (PCI offset 2Ch, see Section 7.9): bits 15–0
Subsystem ID register (PCI offset 2Eh, see Section 7.10): bits 15–0
Power management control and status register (PCI offset 48h, see Section 7.18): bits 15, 8, 1, 0
General control register (PCI offset 4Ch, see Section 7.21): bits 6−4, 2–0
Diagnostic register (PCI offset 54h, see Section 7.23): bits 31–0
The global reset-only (function 4) register bits:
•
•
•
•
•
Subsystem vendor ID register (PCI offset 2Ch, see Section 8.9): bits 15–0
Subsystem ID register (PCI offset 2Eh, see Section 8.10): bits 15–0
Power management control and status register (PCI offset 84h, see Section 8.19): bits 15, 8, 1, 0
General control register (PCI offset 88h, see Section 8.22): bits 6−4, 0
Diagnostic register (PCI offset 90h, see Section 8.24): bits 31–0
The global reset-only (function 5) register bits:
•
•
•
•
Subsystem vendor ID register (PCI offset 2Ch, see Section 9.10): bits 15–0
Subsystem ID register (PCI offset 2Eh, see Section 9.11): bits 15–0
Power management control and status register (PCI offset 48h, see Section 9.19): bits 15, 8, 1, 0
General control register (PCI offset 4Ch, see Section 9.22): bits 6−4, 0
3−27
3−28
4 PC Card Controller Programming Model
This chapter describes the PCI6x21/PCI6x11 PCI configuration registers that make up the 256-byte PCI configuration
header for each PCI6x21/PCI6x11 function. There are some bits which affect both CardBus functions, but which, in
order to work properly, must be accessed only through function 0. These are called global bits. Registers containing
one or more global bits are denoted by § in Table 4−2.
Any bit followed by a † is not cleared by the assertion of PRST (see CardBus Bridge Power Management,
Section 3.8.9, for more details) if PME is enabled (PCI offset A4h, bit 8). In this case, these bits are cleared only by
GRST. If PME is not enabled, then these bits are cleared by GRST or PRST. These bits are sometimes referred to
as PME context bits and are implemented to allow PME context to be preserved during the transition from D3hot or
D3cold to D0.
If a bit is followed by a ‡, then this bit is cleared only by GRST in all cases (not conditional on PME being enabled).
These bits are intended to maintain device context such as interrupt routing and MFUNC programming during warm
resets.
A bit description table, typically included when the register contains bits of more than one type or purpose, indicates
bit field names, a detailed field description, and field access tags which appear in the type column. Table 4−1
describes the field access tags.
Table 4−1. Bit Field Access Tag Descriptions
ACCESS TAG
NAME
MEANING
R
Read
Field can be read by software.
W
Write
Field can be written by software to any value.
S
Set
C
Clear
U
Update
Field can be set by a write of 1. Writes of 0 have no effect.
Field can be cleared by a write of 1. Writes of 0 have no effect.
Field can be autonomously updated by the PCI6x21/PCI6x11 controller.
4.1 PCI Configuration Register Map (Functions 0 and 1)
The PCI6x21/PCI6x11 is a multifunction PCI device, and the PC Card controller is integrated as PCI functions 0 and
1. The configuration header, compliant with the PCI Local Bus Specification as a CardBus bridge header, is
PC99/PC2001 compliant as well. Table 4−2 illustrates the PCI configuration register map, which includes both the
predefined portion of the configuration space and the user-definable registers.
Table 4−2. Functions 0 and 1 PCI Configuration Register Map
REGISTER NAME
OFFSET
Device ID
Vendor ID
Status ‡
00h
Command
Class code
BIST
Header type
Latency timer
04h
Revision ID
08h
Cache line size
0Ch
CardBus socket registers/ExCA base address register
Secondary status ‡
CardBus latency timer
Subordinate bus number
10h
Reserved
Capability pointer
CardBus bus number
PCI bus number
14h
18h
CardBus memory base register 0
1Ch
CardBus memory limit register 0
20h
CardBus memory base register 1
24h
CardBus memory limit register 1
28h
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−1
Table 4−2. Functions 0 and 1 PCI Configuration Register Map (Continued)
REGISTER NAME
OFFSET
CardBus I/O base register 0
2Ch
CardBus I/O limit register 0
30h
CardBus I/O base register 1
34h
CardBus I/O limit register 1
Bridge control †
38h
Interrupt pin
Subsystem ID ‡
Interrupt line
3Ch
Subsystem vendor ID ‡
40h
PC Card 16-bit I/F legacy-mode base-address ‡
44h
Reserved
48h−7Ch
System control †‡§
General control ‡§
General-purpose output ‡
General-purpose input
Diagnostic ‡§
Device control ‡§
80h
Reserved
MC_CD debounce ‡
84h
General-purpose event
enable ‡
General-purpose event
status ‡
88h
Multifunction routing status ‡
8Ch
Card control ‡§
Retry status ‡§
Next item pointer
Capability ID
90h
Reserved
Power management capabilities ‡
Power management data
(Reserved)
Power management
control/status bridge support
extensions
Serial bus control/status ‡
Serial bus slave address ‡
94h−9Ch
A0h
A4h
Power management control/status †‡
Reserved
A8h−ACh
Serial bus index ‡
Serial bus data ‡
B0h
Reserved
B4h−FCh
† One or more bits in this register are PME context bits and can be cleared only by the assertion of GRST when PME is enabled. If PME is not
enabled, then this bit is cleared by the assertion of PRST or GRST.
‡ One or more bits in this register are cleared only by the assertion of GRST.
§ One or more bits in this register are global in nature and must be accessed only through function 0.
4.2 Vendor ID Register
The vendor ID register contains a value allocated by the PCI SIG that identifies the manufacturer of the PCI device.
The vendor ID assigned to Texas Instruments is 104Ch.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Vendor ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
1
0
0
0
0
0
1
0
0
1
1
0
0
Register:
Offset:
Type:
Default:
4−2
Vendor ID
00h (Functions 0, 1)
Read-only
104Ch
4.3 Device ID Register Functions 0 and 1
This read-only register contains the device ID assigned by TI to the PCI6x21/PCI6x11 CardBus controller functions
(PCI functions 0 and 1).
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Device ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
1
0
0
0
0
0
0
0
0
0
1
1
0
0
0
1
Register:
Offset:
Type:
Default:
Device ID
02h (Functions 0 and 1)
Read-only
8031h
4−3
4.4 Command Register
The PCI command register provides control over the PCI6x21/PCI6x11 interface to the PCI bus. All bit functions
adhere to the definitions in the PCI Local Bus Specification (see Table 4−3). None of the bit functions in this register
are shared among the PCI6x21/PCI6x11 PCI functions. Three command registers exist in the PCI6x21/PCI6x11
controller, one for each function. Software manipulates the PCI6x21/PCI6x11 functions as separate entities when
enabling functionality through the command register. The SERR_EN and PERR_EN enable bits in this register are
internally wired OR between the three functions, and these control bits appear to software to be separate for each
function.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Command
Type
R
R
R
R
R
RW
R
RW
R
RW
RW
R
R
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Command
04h
Read-only, Read/Write
0000h
Table 4−3. Command Register Description
BIT
SIGNAL
TYPE
15−11
RSVD
R
10
INT_DISABLE
RW
INTx disable. When set to 1, this bit disables the function from asserting interrupts on the INTx signals.
0 = INTx assertion is enabled (default)
1 = INTx assertion is disabled
9
FBB_EN
R
Fast back-to-back enable. The PCI6x21/PCI6x11 controller does not generate fast back-to-back
transactions; therefore, this bit is read-only. This bit returns a 0 when read.
System error (SERR) enable. This bit controls the enable for the SERR driver on the PCI interface. SERR
can be asserted after detecting an address parity error on the PCI bus. Both this bit and bit 6 must be set
for the PCI6x21/PCI6x11 controller to report address parity errors.
0 = Disables the SERR output driver (default)
1 = Enables the SERR output driver
4−4
8
SERR_EN
RW
7
RSVD
R
FUNCTION
Reserved. Bits 15−11 return 0s when read.
Reserved. Bit 7 returns 0 when read.
6
PERR_EN
RW
Parity error response enable. This bit controls the PCI6x21/PCI6x11 response to parity errors through the
PERR signal. Data parity errors are indicated by asserting PERR, while address parity errors are indicated
by asserting SERR.
0 = PCI6x21/PCI6x11 controller ignores detected parity errors (default).
1 = PCI6x21/PCI6x11 controller responds to detected parity errors.
5
VGA_EN
RW
VGA palette snoop. When set to 1, palette snooping is enabled (i.e., the PCI6x21/PCI6x11 controller does
not respond to palette register writes and snoops the data). When the bit is 0, the PCI6x21/PCI6x11
controller treats all palette accesses like all other accesses.
4
MWI_EN
R
Memory write-and-invalidate enable. This bit controls whether a PCI initiator device can generate memory
write-and-invalidate commands. The PCI6x21/PCI6x11 controller does not support memory
write-and-invalidate commands, it uses memory write commands instead; therefore, this bit is hardwired
to 0. This bit returns 0 when read. Writes to this bit have no effect.
3
SPECIAL
R
Special cycles. This bit controls whether or not a PCI device ignores PCI special cycles. The
PCI6x21/PCI6x11 controller does not respond to special cycle operations; therefore, this bit is hardwired
to 0. This bit returns 0 when read. Writes to this bit have no effect.
2
MAST_EN
RW
Bus master control. This bit controls whether or not the PCI6x21/PCI6x11 controller can act as a PCI bus
initiator (master). The PCI6x21/PCI6x11 controller can take control of the PCI bus only when this bit is set.
0 = Disables the PCI6x21/PCI6x11 ability to generate PCI bus accesses (default)
1 = Enables the PCI6x21/PCI6x11 ability to generate PCI bus accesses
Table 4−3. Command Register Description (continued)
BIT
SIGNAL
TYPE
FUNCTION
1
MEM_EN
RW
Memory space enable. This bit controls whether or not the PCI6x21/PCI6x11 controller can claim cycles
in PCI memory space.
0 = Disables the PCI6x21/PCI6x11 response to memory space accesses (default)
1 = Enables the PCI6x21/PCI6x11 response to memory space accesses
RW
I/O space control. This bit controls whether or not the PCI6x21/PCI6x11 controller can claim cycles in PCI
I/O space.
0 = Disables the PCI6x21/PCI6x11 controller from responding to I/O space accesses (default)
1 = Enables the PCI6x21/PCI6x11 controller to respond to I/O space accesses
0
IO_EN
4.5 Status Register
The status register provides device information to the host system. Bits in this register can be read normally. A bit
in the status register is reset when a 1 is written to that bit location; a 0 written to a bit location has no effect. All bit
functions adhere to the definitions in the PCI Bus Specification, as seen in the bit descriptions. PCI bus status is shown
through each function. See Table 4−4 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RW
RW
RW
RW
RW
R
R
RW
0
0
0
0
0
0
1
R
R
R
R
RU
R
R
R
0
0
0
0
1
0
0
0
0
Name
Type
Default
Status
Register:
Offset:
Type:
Default:
Status
06h (Functions 0, 1)
Read-only, Read/Write
0210h
Table 4−4. Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
15 ‡
PAR_ERR
RW
Detected parity error. This bit is set when a parity error is detected, either an address or data parity error.
Write a 1 to clear this bit.
14 ‡
SYS_ERR
RW
Signaled system error. This bit is set when SERR is enabled and the PCI6x21/PCI6x11 controller signaled
a system error to the host. Write a 1 to clear this bit.
13 ‡
MABORT
RW
Received master abort. This bit is set when a cycle initiated by the PCI6x21/PCI6x11 controller on the PCI
bus has been terminated by a master abort. Write a 1 to clear this bit.
12 ‡
TABT_REC
RW
Received target abort. This bit is set when a cycle initiated by the PCI6x21/PCI6x11 controller on the PCI
bus was terminated by a target abort. Write a 1 to clear this bit.
11 ‡
TABT_SIG
RW
Signaled target abort. This bit is set by the PCI6x21/PCI6x11 controller when it terminates a transaction on
the PCI bus with a target abort. Write a 1 to clear this bit.
10−9
PCI_SPEED
R
DEVSEL timing. These bits encode the timing of DEVSEL and are hardwired to 01b indicating that the
PCI6x21/PCI6x11 controller asserts this signal at a medium speed on nonconfiguration cycle accesses.
Data parity error detected. Write a 1 to clear this bit.
0 = The conditions for setting this bit have not been met.
1 = A data parity error occurred and the following conditions were met:
a. PERR was asserted by any PCI device including the PCI6x21/PCI6x11 controller.
b. The PCI6x21/PCI6x11 controller was the bus master during the data parity error.
c. The parity error response bit is set in the command register.
8‡
DATAPAR
RW
7
FBB_CAP
R
Fast back-to-back capable. The PCI6x21/PCI6x11 controller cannot accept fast back-to-back transactions;
thus, this bit is hardwired to 0.
6
UDF
R
UDF supported. The PCI6x21/PCI6x11 controller does not support user-definable features; therefore, this
bit is hardwired to 0.
5
66MHZ
R
66-MHz capable. The PCI6x21/PCI6x11 controller operates at a maximum PCLK frequency of 33 MHz;
therefore, this bit is hardwired to 0.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−5
Table 4−4. Status Register Description (continued)
BIT
SIGNAL
TYPE
FUNCTION
4
CAPLIST
R
Capabilities list. This bit returns 1 when read. This bit indicates that capabilities in addition to standard PCI
capabilities are implemented. The linked list of PCI power-management capabilities is implemented in this
function.
3
INT_STATUS
RU
Interrupt status. This bit reflects the interrupt status of the function. Only when bit 10 (INT_DISABLE) in the
command register (PCI offset 04h, see Section 4.4) is a 0 and this bit is a 1, is the function’s INTx signal
asserted. Setting the INT_DISABLE bit to a 1 has no effect on the state of this bit.
2−0
RSVD
R
Reserved. These bits return 0s when read.
4.6 Revision ID Register
The revision ID register indicates the silicon revision of the PCI6x21/PCI6x11 controller.
Bit
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Name
Revision ID
Register:
Offset:
Type:
Default:
Revision ID
08h (functions 0, 1)
Read-only
00h
4.7 Class Code Register
The class code register recognizes PCI6x21/PCI6x11 functions 0 and 1 as a bridge device (06h) and a CardBus
bridge device (07h), with a 00h programming interface.
Bit
23
22
21
20
19
18
17
16
15
14
13
Name
12
11
10
9
8
7
6
5
4
3
2
1
0
PCI class code
Base class
Subclass
Programming interface
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
1
1
0
0
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
PCI class code
09h (functions 0, 1)
Read-only
06 0700h
4.8 Cache Line Size Register
The cache line size register is programmed by host software to indicate the system cache line size.
Bit
7
6
5
Name
Type
Default
3
2
1
0
Cache line size
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
4−6
4
Cache line size
0Ch (Functions 0, 1)
Read/Write
00h
4.9 Latency Timer Register
The latency timer register specifies the latency timer for the PCI6x21/PCI6x11 controller, in units of PCI clock cycles.
When the PCI6x21/PCI6x11 controller is a PCI bus initiator and asserts FRAME, the latency timer begins counting
from zero. If the latency timer expires before the PCI6x21/PCI6x11 transaction has terminated, then the
PCI6x21/PCI6x11 controller terminates the transaction when its GNT is deasserted.
Bit
7
6
5
4
Name
Type
Default
3
2
1
0
Latency timer
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Latency timer
0Dh
Read/Write
00h
4.10 Header Type Register
The header type register returns 82h when read, indicating that the PCI6x21/PCI6x11 functions 0 and 1 configuration
spaces adhere to the CardBus bridge PCI header. The CardBus bridge PCI header ranges from PCI registers
00h−7Fh, and 80h−FFh is user-definable extension registers.
Bit
7
6
5
4
Name
3
2
1
0
Header type
Type
R
R
R
R
R
R
R
R
Default
1
0
0
0
0
0
1
0
Register:
Offset:
Type:
Default:
Header type
0Eh (Functions 0, 1)
Read-only
82h
4.11 BIST Register
Because the PCI6x21/PCI6x11 controller does not support a built-in self-test (BIST), this register returns the value
of 00h when read.
Bit
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Name
BIST
Register:
Offset:
Type:
Default:
BIST
0Fh (Functions 0, 1)
Read-only
00h
4−7
4.12 CardBus Socket Registers/ExCA Base Address Register
This register is programmed with a base address referencing the CardBus socket registers and the memory-mapped
ExCA register set. Bits 31−12 are read/write, and allow the base address to be located anywhere in the 32-bit PCI
memory address space on a 4-Kbyte boundary. Bits 11−0 are read-only, returning 0s when read. When software
writes all 1s to this register, the value read back is FFFF F000h, indicating that at least 4K bytes of memory address
space are required. The CardBus registers start at offset 000h, and the memory-mapped ExCA registers begin at
offset 800h. This register is not shared by functions 0 and 1, so the system maps each socket control register
separately.
Bit
31
30
29
28
27
26
Name
Type
25
24
23
22
21
20
19
18
17
16
CardBus socket registers/ExCA base address
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
CardBus socket registers/ExCA base address
RW
RW
RW
RW
R
R
R
R
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
CardBus socket registers/ExCA base address
10h
Read-only, Read/Write
0000 0000h
4.13 Capability Pointer Register
The capability pointer register provides a pointer into the PCI configuration header where the PCI power management
register block resides. PCI header doublewords at A0h and A4h provide the power management (PM) registers. Each
socket has its own capability pointer register. This register is read-only and returns A0h when read.
Bit
7
6
5
4
Type
R
R
R
R
Default
1
0
1
0
Name
2
1
0
R
R
R
R
0
0
0
0
Capability pointer
Register:
Offset:
Type:
Default:
4−8
3
Capability pointer
14h
Read-only
A0h
4.14 Secondary Status Register
The secondary status register is compatible with the PCI-PCI bridge secondary status register. It indicates
CardBus-related device information to the host system. This register is very similar to the PCI status register (PCI
offset 06h, see Section 4.5), and status bits are cleared by a writing a 1. This register is not shared by the two socket
functions, but is accessed on a per-socket basis. See Table 4−5 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
Name
Type
Default
8
7
6
5
4
3
2
1
0
Secondary status
RC
RC
RC
RC
RC
R
R
RC
R
R
R
R
R
R
R
R
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Secondary status
16h
Read-only, Read/Clear
0200h
Table 4−5. Secondary Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
15 ‡
CBPARITY
RC
Detected parity error. This bit is set when a CardBus parity error is detected, either an address or data
parity error. Write a 1 to clear this bit.
14 ‡
CBSERR
RC
Signaled system error. This bit is set when CSERR is signaled by a CardBus card. The PCI6x21/PCI6x11
controller does not assert the CSERR signal. Write a 1 to clear this bit.
13 ‡
CBMABORT
RC
Received master abort. This bit is set when a cycle initiated by the PCI6x21/PCI6x11 controller on the
CardBus bus is terminated by a master abort. Write a 1 to clear this bit.
12 ‡
REC_CBTA
RC
Received target abort. This bit is set when a cycle initiated by the PCI6x21/PCI6x11 controller on the
CardBus bus is terminated by a target abort. Write a 1 to clear this bit.
11 ‡
SIG_CBTA
RC
Signaled target abort. This bit is set by the PCI6x21/PCI6x11 controller when it terminates a transaction
on the CardBus bus with a target abort. Write a 1 to clear this bit.
10−9
CB_SPEED
R
CDEVSEL timing. These bits encode the timing of CDEVSEL and are hardwired to 01b indicating that the
PCI6x21/PCI6x11 controller asserts this signal at a medium speed.
CardBus data parity error detected. Write a 1 to clear this bit.
0 = The conditions for setting this bit have not been met.
1 = A data parity error occurred and the following conditions were met:
a. CPERR was asserted on the CardBus interface.
b. The PCI6x21/PCI6x11 controller was the bus master during the data parity error.
c. The parity error response enable bit (bit 0) is set in the bridge control register (PCI offset 3Eh,
see Section 4.25).
8‡
CB_DPAR
RC
7
CBFBB_CAP
R
Fast back-to-back capable. The PCI6x21/PCI6x11 controller cannot accept fast back-to-back
transactions; therefore, this bit is hardwired to 0.
6
CB_UDF
R
User-definable feature support. The PCI6x21/PCI6x11 controller does not support user-definable
features; therefore, this bit is hardwired to 0.
5
CB66MHZ
R
66-MHz capable. The PCI6x21/PCI6x11 CardBus interface operates at a maximum CCLK frequency of
33 MHz; therefore, this bit is hardwired to 0.
4−0
RSVD
R
These bits return 0s when read.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−9
4.15 PCI Bus Number Register
The PCI bus number register is programmed by the host system to indicate the bus number of the PCI bus to which
the PCI6x21/PCI6x11 controller is connected. The PCI6x21/PCI6x11 controller uses this register in conjunction with
the CardBus bus number and subordinate bus number registers to determine when to forward PCI configuration
cycles to its secondary buses.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
PCI bus number
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
PCI bus number
18h (Functions 0, 1)
Read/Write
00h
4.16 CardBus Bus Number Register
The CardBus bus number register is programmed by the host system to indicate the bus number of the CardBus bus
to which the PCI6x21/PCI6x11 controller is connected. The PCI6x21/PCI6x11 controller uses this register in
conjunction with the PCI bus number and subordinate bus number registers to determine when to forward PCI
configuration cycles to its secondary buses. This register is separate for each PCI6x21/PCI6x11 controller function.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
CardBus bus number
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
CardBus bus number
19h
Read/Write
00h
4.17 Subordinate Bus Number Register
The subordinate bus number register is programmed by the host system to indicate the highest numbered bus below
the CardBus bus. The PCI6x21/PCI6x11 controller uses this register in conjunction with the PCI bus number and
CardBus bus number registers to determine when to forward PCI configuration cycles to its secondary buses. This
register is separate for each CardBus controller function.
Bit
7
6
5
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
3
2
1
0
RW
RW
RW
RW
0
0
0
0
Subordinate bus number
Register:
Offset:
Type:
Default:
4−10
4
Subordinate bus number
1Ah
Read/Write
00h
4.18 CardBus Latency Timer Register
The CardBus latency timer register is programmed by the host system to specify the latency timer for the
PCI6x21/PCI6x11 CardBus interface, in units of CCLK cycles. When the PCI6x21/PCI6x11 controller is a CardBus
initiator and asserts CFRAME, the CardBus latency timer begins counting. If the latency timer expires before the
PCI6x21/PCI6x11 transaction has terminated, then the PCI6x21/PCI6x11 controller terminates the transaction at the
end of the next data phase. A recommended minimum value for this register of 20h allows most transactions to be
completed.
Bit
7
6
5
4
Name
3
2
1
0
CardBus latency timer
Type
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Default
Register:
Offset:
Type:
Default:
CardBus latency timer
1Bh (Functions 0, 1)
Read/Write
00h
4.19 CardBus Memory Base Registers 0, 1
These registers indicate the lower address of a PCI memory address range. They are used by the PCI6x21/PCI6x11
controller to determine when to forward a memory transaction to the CardBus bus, and likewise, when to forward a
CardBus cycle to PCI. Bits 31−12 of these registers are read/write and allow the memory base to be located anywhere
in the 32-bit PCI memory space on 4-Kbyte boundaries. Bits 11−0 are read-only and always return 0s. Writes to these
bits have no effect. Bits 8 and 9 of the bridge control register (PCI offset 3Eh, see Section 4.25) specify whether
memory windows 0 and 1 are prefetchable or nonprefetchable. The memory base register or the memory limit register
must be nonzero in order for the PCI6x21/PCI6x11 controller to claim any memory transactions through CardBus
memory windows (i.e., these windows by default are not enabled to pass the first 4 Kbytes of memory to CardBus).
Bit
31
30
29
28
27
26
Name
Type
25
24
23
22
21
20
19
18
17
16
Memory base registers 0, 1
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
Memory base registers 0, 1
RW
RW
RW
RW
R
R
R
R
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Memory base registers 0, 1
1Ch, 24h
Read-only, Read/Write
0000 0000h
4−11
4.20 CardBus Memory Limit Registers 0, 1
These registers indicate the upper address of a PCI memory address range. They are used by the PCI6x21/PCI6x11
controller to determine when to forward a memory transaction to the CardBus bus, and likewise, when to forward a
CardBus cycle to PCI. Bits 31−12 of these registers are read/write and allow the memory base to be located anywhere
in the 32-bit PCI memory space on 4-Kbyte boundaries. Bits 11−0 are read-only and always return 0s. Writes to these
bits have no effect. Bits 8 and 9 of the bridge control register (PCI offset 3Eh, see Section 4.25) specify whether
memory windows 0 and 1 are prefetchable or nonprefetchable. The memory base register or the memory limit register
must be nonzero in order for the PCI6x21/PCI6x11 controller to claim any memory transactions through CardBus
memory windows (i.e., these windows by default are not enabled to pass the first 4 Kbytes of memory to CardBus).
Bit
31
30
29
28
27
26
25
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
RW
RW
RW
RW
R
R
R
R
R
0
0
0
0
0
0
0
0
0
Name
Type
Default
23
22
21
20
19
18
17
16
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
6
5
4
3
2
1
0
R
R
R
R
R
R
R
0
0
0
0
0
0
0
Memory limit registers 0, 1
Name
Type
24
Memory limit registers 0, 1
Register:
Offset:
Type:
Default:
Memory limit registers 0, 1
20h, 28h
Read-only, Read/Write
0000 0000h
4.21 CardBus I/O Base Registers 0, 1
These registers indicate the lower address of a PCI I/O address range. They are used by the PCI6x21/PCI6x11
controller to determine when to forward an I/O transaction to the CardBus bus, and likewise, when to forward a
CardBus cycle to the PCI bus. The lower 16 bits of this register locate the bottom of the I/O window within a 64-Kbyte
page. The upper 16 bits (31−16) are all 0s, which locates this 64-Kbyte page in the first page of the 32-bit PCI I/O
address space. Bits 31−2 are read/write and always return 0s forcing I/O windows to be aligned on a natural
doubleword boundary in the first 64-Kbyte page of PCI I/O address space. Bits 1−0 are read-only, returning 00 or 01
when read, depending on the value of bit 11 (IO_BASE_SEL) in the general control register (PCI offset 86h, see
Section 4.31). These I/O windows are enabled when either the I/O base register or the I/O limit register is nonzero.
The I/O windows by default are not enabled to pass the first doubleword of I/O to CardBus.
Either the I/O base register or the I/O limit register must be nonzero to enable any I/O transactions.
Bit
31
30
29
28
27
26
25
Name
Type
24
23
22
21
20
19
18
17
16
I/O base registers 0, 1
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
I/O base registers 0, 1
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
X
Register:
Offset:
Type:
Default:
4−12
I/O base registers 0, 1
2Ch, 34h
Read-only, Read/Write
0000 000Xh
4.22 CardBus I/O Limit Registers 0, 1
These registers indicate the upper address of a PCI I/O address range. They are used by the PCI6x21/PCI6x11
controller to determine when to forward an I/O transaction to the CardBus bus, and likewise, when to forward a
CardBus cycle to PCI. The lower 16 bits of this register locate the top of the I/O window within a 64-Kbyte page, and
the upper 16 bits are a page register which locates this 64-Kbyte page in 32-bit PCI I/O address space. Bits 15−2
are read/write and allow the I/O limit address to be located anywhere in the 64-Kbyte page (indicated by bits 31−16
of the appropriate I/O base register) on doubleword boundaries.
Bits 31−16 are read-only and always return 0s when read. The page is set in the I/O base register. Bits 15−2 are
read/write and bits 1−0 are read-only, returning 00 or 01 when read, depending on the value of bit 12 (IO_LIMIT_SEL)
in the general control register (PCI offset 86h, see Section 4.31). Writes to read-only bits have no effect.
These I/O windows are enabled when either the I/O base register or the I/O limit register is nonzero. By default, the
I/O windows are not enabled to pass the first doubleword of I/O to CardBus.
Either the I/O base register or the I/O limit register must be nonzero to enable any I/O transactions.
Bit
31
30
29
28
27
26
25
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Name
Default
23
22
21
20
19
18
17
16
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
7
6
5
4
3
2
1
0
RW
RW
RW
RW
RW
RW
R
R
0
0
0
0
0
0
0
X
I/O limit registers 0, 1
Name
Type
24
I/O limit registers 0, 1
Register:
Offset:
Type:
Default:
I/O limit registers 0, 1
30h, 38h
Read-only, Read/Write
0000 000Xh
4.23 Interrupt Line Register
The interrupt line register is a read/write register used by the host software. As part of the interrupt routing procedure,
the host software writes this register with the value of the system IRQ assigned to the function.
Bit
7
6
5
4
Name
Type
Default
3
2
1
0
Interrupt line
RW
RW
RW
RW
RW
RW
RW
RW
1
1
1
1
1
1
1
1
Register:
Offset:
Type:
Default:
Interrupt line
3Ch
Read/Write
FFh
4−13
4.24 Interrupt Pin Register
The value read from this register is function dependent. The default value for function 0 is 01h (INTA), and the default
value for function 1 is 02h (INTB), the default value for function 2 is 03h (INTC), and the default value for function 3
is 04h (INTD). The value also depends on the values of bits 28, the tie-all bit (TIEALL), and 29, the interrupt tie bit
(INTRTIE), in the system control register (PCI offset 80h, see Section 4.29). The INTRTIE bit is compatible with
previous TI CardBus controllers, and when set to 1, ties INTB to INTA internally. The TIEALL bit ties INTA, INTB, INTC,
and INTD together internally. The internal interrupt connections set by INTRTIE and TIEALL are communicated to
host software through this standard register interface. This read-only register is described for all PCI6x21/PCI6x11
functions in Table 4−6.
PCI function 0
Bit
7
6
5
Name
4
3
2
1
0
Interrupt pin − PCI function 0
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
1
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
1
0
7
6
5
4
3
2
1
0
PCI function 1
Bit
Name
Interrupt pin − PCI function 1
PCI function 3
Bit
Name
Interrupt pin − PCI function 3
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
X
X
X
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
X
X
X
7
6
5
4
3
2
1
0
PCI function 4
Bit
Name
Interrupt pin − PCI function 4
PCI function 5
Bit
Name
Interrupt pin − PCI function 5
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
X
X
X
Register:
Offset:
Type:
Default:
4−14
Interrupt pin
3Dh
Read-only
01h (function 0), 02h (function 1), 04h (function 3), 04h (function 4), 04h (function 5)
Table 4−6. Interrupt Pin Register Cross Reference
INTRTIE BIT
(BIT 29,
OFFSET 80h)
TIEALL BIT
(BIT 28,
OFFSET 80h)
INTPIN
FUNCTION 0
(CARDBUS)
INTPIN
FUNCTION 1
(CARDBUS)
0
0
01h (INTA)
02h (INTB)
1
0
01h (INTA)
01h (INTA)
X
1
01h (INTA)
01h (INTA)
INTPIN
FUNCTION 3
(FLASH MEDIA)
INTPIN
Function 4
(SD Host)
INTPIN
Function 5
(Smart Card)
Determined by bits
6−5 (INT_SEL field) in
flash media general
control register (see
Section 7.21)
Determined by bits
6−5 (INT_SEL field) in
SD host general
control register (see
Section 8.22)
Determined by bits
6−5 (INT_SEL field) in
Smart Card general
control register (see
Section 9.22)
01h (INTA)
0x01 (INTA)
0x01 (INTA)
4.25 Bridge Control Register
The bridge control register provides control over various PCI6x21/PCI6x11 bridging functions. Some bits in this
register are global in nature and must be accessed only through function 0. See Table 4−7 for a complete description
of the register contents.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Bridge control
Type
R
R
R
R
R
RW
RW
RW
RW
RW
RW
R
RW
RW
RW
RW
Default
0
0
0
0
0
0
1
1
0
1
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Bridge control
3Eh (Function 0, 1)
Read-only, Read/Write
0340h
Table 4−7. Bridge Control Register Description
BIT
SIGNAL
TYPE
15−11
RSVD
R
FUNCTION
These bits return 0s when read.
10
POSTEN
RW
Write posting enable. Enables write posting to and from the CardBus sockets. Write posting enables the
posting of write data on burst cycles. Operating with write posting disabled impairs performance on burst
cycles. Note that burst write data can be posted, but various write transactions may not. This bit is socket
dependent and is not shared between functions 0 and 1.
9
PREFETCH1
RW
Memory window 1 type. This bit specifies whether or not memory window 1 is prefetchable. This bit is
socket dependent. This bit is encoded as:
0 = Memory window 1 is nonprefetchable.
1 = Memory window 1 is prefetchable (default).
8
PREFETCH0
RW
Memory window 0 type. This bit specifies whether or not memory window 0 is prefetchable. This bit is
socket dependent. This bit is encoded as:
0 = Memory window 0 is nonprefetchable.
1 = Memory window 0 is prefetchable (default).
RW
PCI interrupt − IREQ routing enable. This bit is used to select whether PC Card functional interrupts are
routed to PCI interrupts or to the IRQ specified in the ExCA registers.
0 = Functional interrupts are routed to PCI interrupts (default).
1 = Functional interrupts are routed by ExCA registers.
7
6†
INTR
CRST
RW
CardBus reset. When this bit is set, the CRST signal is asserted on the CardBus interface. The CRST
signal can also be asserted by passing a PRST assertion to CardBus.
0 = CRST is deasserted.
1 = CRST is asserted (default).
This bit is not cleared by the assertion of PRST. It is only cleared by the assertion of GRST.
† One or more bits in this register are PME context bits and can be cleared only by the assertion of GRST when PME is enabled. If PME is not
enabled, then this bit is cleared by the assertion of PRST or GRST.
4−15
Table 4−7. Bridge Control Register Description (Continued)
BIT
SIGNAL
TYPE
FUNCTION
Master abort mode. This bit controls how the PCI6x21/PCI6x11 controller responds to a master abort when
the PCI6x21/PCI6x11 controller is an initiator on the CardBus interface. This bit is common between each
socket.
0 = Master aborts not reported (default).
1 = Signal target abort on PCI and signal SERR, if enabled.
5
MABTMODE
RW
4
RSVD
R
3
VGAEN
RW
VGA enable. This bit affects how the PCI6x21/PCI6x11 controller responds to VGA addresses. When this
bit is set, accesses to VGA addresses are forwarded.
2
ISAEN
RW
ISA mode enable. This bit affects how the PCI6x21/PCI6x11 controller passes I/O cycles within the
64-Kbyte ISA range. This bit is not common between sockets. When this bit is set, the PCI6x21/PCI6x11
controller does not forward the last 768 bytes of each 1K I/O range to CardBus.
1
CSERREN
RW
CSERR enable. This bit controls the response of the PCI6x21/PCI6x11 controller to CSERR signals on
the CardBus bus. This bit is separate for each socket.
0 = CSERR is not forwarded to PCI SERR (default)
1 = CSERR is forwarded to PCI SERR.
0
CPERREN
RW
CardBus parity error response enable. This bit controls the response of the PCI6x21/PCI6x11 to CardBus
parity errors. This bit is separate for each socket.
0 = CardBus parity errors are ignored (default).
1 = CardBus parity errors are reported using CPERR.
This bit returns 0 when read.
4.26 Subsystem Vendor ID Register
The subsystem vendor ID register, used for system and option card identification purposes, may be required for
certain operating systems. This register is read-only or read/write, depending on the setting of bit 5 (SUBSYSRW)
in the system control register (PCI offset 80h, See Section 4.29). When bit 5 is 0, this register is read/write; when bit 5
is 1, this register is read-only. The default mode is read-only. All bits in this register are reset by GRST only.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Subsystem vendor ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Subsystem vendor ID
40h (Functions 0, 1)
Read-only, (Read/Write when bit 5 in the system control register is 0)
0000h
4.27 Subsystem ID Register
The subsystem ID register, used for system and option card identification purposes, may be required for certain
operating systems. This register is read-only or read/write, depending on the setting of bit 5 (SUBSYSRW) in the
system control register (PCI offset 80h, see Section 4.29). When bit 5 is 0, this register is read/write; when bit 5 is
1, this register is read-only. The default mode is read-only. All bits in this register are reset by GRST only.
If an EEPROM is present, then the subsystem ID and subsystem vendor ID is loaded from the EEPROM after a reset.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Subsystem ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
4−16
Subsystem ID
42h (Functions 0, 1)
Read-only, (Read/Write when bit 5 in the system control register is 0)
0000h
4.28 PC Card 16-Bit I/F Legacy-Mode Base-Address Register
The PCI6x21/PCI6x11 controller supports the index/data scheme of accessing the ExCA registers, which is mapped
by this register. An address written to this register is the address for the index register and the address+1 is the data
address. Using this access method, applications requiring index/data ExCA access can be supported. The base
address can be mapped anywhere in 32-bit I/O space on a word boundary; hence, bit 0 is read-only, returning 1 when
read. As specified in the PCI to PCMCIA CardBus Bridge Register Description specification, this register is shared
by functions 0 and 1. See the ExCA register set description in Section 5 for register offsets. All bits in this register
are reset by GRST only.
Bit
31
30
29
28
27
Name
Type
26
25
24
23
22
21
20
19
18
17
16
PC Card 16-bit I/F legacy-mode base-address
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
PC Card 16-bit I/F legacy-mode base-address
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
Register:
Offset:
Type:
Default:
PC Card 16-bit I/F legacy-mode base-address
44h (Functions 0, 1)
Read-only, Read/Write
0000 0001h
4−17
4.29 System Control Register
System-level initializations are performed through programming this doubleword register. Some of the bits are global
in nature and must be accessed only through function 0. See Table 4−8 for a complete description of the register
contents.
Bit
31
30
29
28
27
26
25
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
1
0
0
Bit
15
14
13
12
11
10
9
Name
Type
Default
23
22
21
20
19
18
17
16
R
RW
RW
RW
R
R
R
R
0
0
1
0
0
0
0
0
0
8
7
6
5
4
3
2
1
0
System control
Name
Type
24
System control
RW
RW
R
R
R
R
R
R
R
RW
RW
RW
RW
R
RW
RW
1
0
0
1
0
0
0
0
0
1
1
0
0
0
0
0
Register:
Offset:
Type:
Default:
System control
80h (Functions 0, 1)
Read-only, Read/Write
0840 9060h
Table 4−8. System Control Register Description
BIT
SIGNAL
TYPE
FUNCTION
31−30 ‡§
SER_STEP
RW
Serial input stepping. In serial PCI interrupt mode, these bits are used to configure the serial stream PCI
interrupt frames, and can be used to accomplish an even distribution of interrupts signaled on the four PCI
interrupt slots.
00 = INTA/INTB/INTC/INTD signal in INTA/INTB/INTC/INTD slots (default)
01 = INTA/INTB/INTC/INTD signal in INTB/INTC/INTD/INTA slots
10 = INTA/INTB/INTC/INTD signal in INTC/INTD/INTA/INTB slots
11 = INTA/INTB/INTC/INTD signal in INTD/INTA/INTB/INTC slots
29 ‡§
INTRTIE
RW
This bit ties INTA to INTB internally (to INTA), and reports this through the interrupt pin register (PCI offset
3Dh, see Section 4.24). This bit has no effect on INTC or INTD.
28 ‡
TIEALL
RW
This bit ties INTA, INTB, INTC, and INTD internally (to INTA), and reports this through the interrupt pin
register (PCI offset 3Dh, see Section 4.24).
RW
P2C power switch clock. The PCI6x21/PCI6x11 CLOCK signal clocks the serial interface power switch
and the internal state machine. The default state for this bit is 0, requiring an external clock source provided
to the CLOCK terminal. Bit 27 can be set to 1, allowing the internal oscillator to provide the clock signal.
0 = CLOCK is provided externally, input to the PCI6x21/PCI6x11 controller.
1 = CLOCK is generated by the internal oscillator and driven by the PCI6x21/PCI6x11 controller.
(default)
RW
SMI interrupt routing. This bit is shared between functions 0 and 1, and selects whether IRQ2 or CSC is
signaled when a write occurs to power a PC Card socket.
0 = PC Card power change interrupts are routed to IRQ2 (default).
1 = A CSC interrupt is generated on PC Card power changes.
27 ‡
26 ‡§
PSCCLK
SMIROUTE
25 ‡
SMISTATUS
RW
SMI interrupt status. This socket-dependent bit is set when a write occurs to set the socket power, and
the SMIENB bit is set. Writing a 1 to this bit clears the status.
0 = SMI interrupt is signaled.
1 = SMI interrupt is not signaled.
24 ‡§
SMIENB
RW
SMI interrupt mode enable. When this bit is set, the SMI interrupt signaling generates an interrupt when
a write to the socket power control occurs. This bit is shared and defaults to 0 (disabled).
0 = SMI interrupt mode is disabled (default).
1 = SMI interrupt mode is enabled.
23
RSVD
R
Reserved
‡ One or more bits in this register are cleared only by the assertion of GRST.
§ These bits are global in nature and must be accessed only through function 0.
4−18
Table 4−8. System Control Register Description (continued)
BIT
SIGNAL
TYPE
FUNCTION
22 ‡
CBRSVD
RW
CardBus reserved terminals signaling. When this bit is set, the RSVD CardBus terminals are driven
low when a CardBus card has been inserted. When this bit is low, these signals are placed in a
high-impedance state.
0 = Place the CardBus RSVD terminals in a high-impedance state.
1 = Drive the CardBus RSVD terminals low (default).
21 ‡
VCCPROT
RW
VCC protection enable. This bit is socket dependent.
0 = VCC protection is enabled for 16-bit cards (default).
1 = VCC protection is disabled for 16-bit cards.
20−16 ‡
RSVD
RW
These bits are reserved. Do not change the value of these bits.
15 ‡§
MRBURSTDN
RW
Memory read burst enable downstream. When this bit is set, the PCI6x21/PCI6x11 controller allows
memory read transactions to burst downstream.
0 = MRBURSTDN downstream is disabled.
1 = MRBURSTDN downstream is enabled (default).
14 ‡§
MRBURSTUP
RW
Memory read burst enable upstream. When this bit is set, the PCI6x21/PCI6x11 controller allows
memory read transactions to burst upstream.
0 = MRBURSTUP upstream is disabled (default).
1 = MRBURSTUP upstream is enabled.
13 ‡
SOCACTIVE
R
Socket activity status. When set, this bit indicates access has been performed to or from a PC Card.
Reading this bit causes it to be cleared. This bit is socket dependent.
0 = No socket activity (default)
1 = Socket activity
12
RSVD
R
Reserved. This bit returns 1 when read.
R
Power-stream-in-progress status bit. When set, this bit indicates that a power stream to the power
switch is in progress and a powering change has been requested. When this bit is cleared, it indicates
that the power stream is complete.
0 = Power stream is complete, delay has expired (default).
1 = Power stream is in progress.
R
Power-up delay-in-progress status bit. When set, this bit indicates that a power-up stream has been
sent to the power switch, and proper power may not yet be stable. This bit is cleared when the power-up
delay has expired.
0 = Power-up delay has expired (default).
1 = Power-up stream sent to switch. Power might not be stable.
R
Power-down delay-in-progress status bit. When set, this bit indicates that a power-down stream has
been sent to the power switch, and proper power may not yet be stable. This bit is cleared when the
power-down delay has expired.
0 = Power-down delay has expired (default).
1 = Power-down stream sent to switch. Power might not be stable.
11 ‡
10 †
9†
PWRSTREAM
DELAYUP
DELAYDOWN
8†
INTERROGATE
R
Interrogation in progress. When set, this bit indicates an interrogation is in progress, and clears when
the interrogation completes. This bit is socket-dependent.
0 = Interrogation not in progress (default)
1 = Interrogation in progress
7
RSVD
R
Reserved. This bit returns 0 when read.
6 ‡§
5 ‡§
PWRSAVINGS
SUBSYSRW
RW
Power savings mode enable. When this bit is set, the PCI6x21/PCI6x11 controller consumes less
power with no performance loss. This bit is shared between the two PCI6x21/PCI6x11 CardBus
functions.
0 = Power savings mode disabled
1 = Power savings mode enabled (default)
RW
Subsystem ID and subsystem vendor ID, ExCA ID and revision register read/write enable. This bit also
controls read/write for the function 3 subsystem ID register.
0 = Registers are read/write.
1 = Registers are read-only (default).
† One or more bits in this register are PME context bits and can be cleared only by the assertion of GRST when PME is enabled. If PME is not
enabled, then this bit is cleared by the assertion of PRST or GRST.
‡ One or more bits in this register are cleared only by the assertion of GRST.
§ These bits are global in nature and must be accessed only through function 0.
4−19
Table 4−8. System Control Register Description (continued)
BIT
SIGNAL
TYPE
4 ‡§
CB_DPAR
RW
3 ‡§
RSVD
R
Reserved. This bit returns 0 when read.
2‡
EXCAPOWER
R
ExCA power control bit.
0 = Enables 3.3 V (default)
1 = Enables 5 V
1 ‡§
KEEPCLK
RW
FUNCTION
CardBus data parity SERR signaling enable.
0 = CardBus data parity not signaled on PCI SERR signal (default)
1 = CardBus data parity signaled on PCI SERR signal
Keep clock. When this bit is set, the PCI6x21/PCI6x11 controller follows the CLKRUN protocol to
maintain the system PCLK and the CCLK (CardBus clock). This bit is global to the PCI6x21/PCI6x11
functions.
0 = Allow system PCLK and CCLK clocks to stop (default)
1 = Never allow system PCLK or CCLK clock to stop
Note that the functionality of this bit has changed relative to that of the PCI12XX family of TI CardBus
controllers. In these CardBus controllers, setting this bit only maintains the PCI clock, not the CCLK.
In the PCI6x21/PCI6x11 controller, setting this bit maintains both the PCI clock and the CCLK.
0 ‡§
RIMUX
RW
PME/RI_OUT select bit. When this bit is 1, the PME signal is routed to the PME/RI_OUT terminal (R03).
When this bit is 0 and bit 7 (RIENB) of the card control register is 1, the RI_OUT signal is routed to the
PME/RI_OUT terminal. If this bit is 0 and bit 7 (RIENB) of the card control register is 0, then the output
is placed in a high-impedance state. This terminal is encoded as:
0 = RI_OUT signal is routed to the PME/RI_OUT terminal if bit 7 of the card control register is 1.
(default)
1 = PME signal is routed to the PME/RI_OUT terminal of the PCI6x21/PCI6x11 controller.
NOTE: If this bit (bit 0) is 0 and bit 7 of the card control register (PCI offset 91h, see Section 4.38) is
0, then the output on the PME/RI_OUT terminal is placed in a high-impedance state.
‡ One or more bits in this register are cleared only by the assertion of GRST.
§ These bits are global in nature and must be accessed only through function 0.
4.30 MC_CD Debounce Register
This register provides debounce time in units of 2 ms for the MC_CD signal on UltraMedia cards. This register defaults
to 19h, which gives a default debounce time of 50 ms. All bits in this register are reset by GRST only.
Bit
7
6
5
Name
Type
Default
3
2
1
0
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
1
1
0
0
1
Register:
Offset:
Type:
Default:
4−20
4
MC_CD debounce
MC_CD debounce
84h (Functions 0, 1)
Read/Write
19h
4.31 General Control Register
The general control register provides top level PCI arbitration control. It also provides the ability to disable the 1394
OHCI function and provides control over miscellaneous new functionality. See Table 4−9 for a complete description
of the register contents.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
General control
Type
R
R
RW
RW
RW
RW
R
R
R
R
RW
RW
RW
R
RW
RW
Default
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
General control
86h
Read/Write, Read-only
0080h
Table 4−9. General Control Register Description
BIT
15 ‡
SIGNAL
FM_PWR_CTRL
_POL
TYPE
FUNCTION
RW
Flash media power control pin polarity. This bit controls the polarity of the MC_PWR_CTRL_0 and
MC_PWR_CTRL_1 terminals.
0 = MC_PWR_CTRL_x terminals are active low (default)
1 = MC_PWR_CTRL_x terminals are active high
Smart Card interface select. This bit controls the selection of the dedicated Smart Card interface
used by the controller.
0 = EMV interface selected (default)
1 = PCI7x10-style interface selected
Note: The PCI7x10-style interface is only allowed when bits 9−8 (FM_IF_SEL field) are 01. If bits
9−8 contain any other value, then this bit is 0. Care must be taken in the design to ensure that this
bit can be set to 1 at the same time that bits 9−8 are set to 01.
14 ‡
SC_IF_SEL
RWU
13 ‡
SIM_MODE
RW
When this bit is set, it reduces the query time for UltraMedia card types.
0 = Query time is unaffected (default)
1 = Query time is reduced for simulation purposes
12 ‡
IO_LIMIT_SEL
RW
When this bit is set, bit 0 in the I/O limit registers (PCI offsets 30h and 38h) for both CardBus functions
is set.
0 = Bit 0 in the I/O limit registers is 0 (default)
1 = Bit 0 in the I/O limit registers is 1
11 ‡
IO_BASE_SEL
RW
When this bit is set, bit 0 in the I/O base registers (PCI offsets 2Ch and 34h) for both CardBus functions
is set.
0 = Bit 0 in the I/O base registers is 0 (default)
1 = Bit 0 in the I/O base registers is 1
10 ‡
12V_SW_SEL
RW
Power switch select. This bit selects which power switch is implemented in the system.
0 = A 1.8-V capable power switch (TPS2228) is used (default)
1 = A 12-V capable power switch (TPS2226) is used
9−8 ‡
FM_IF_SEL
RW
Dedicated flash media interface selection. This field controls the mode of the dedicated flash media
interface.
00 = Flash media interface configured as SD/MMC socket + MS socket (default)
01 = Flash media interface configured as 2-in-1 (SD/MMC, MS) socket
10 = Flash media interface configured as 3-in-1 (SD/MMC, MS, SM/XD) socket
11 = Reserved
7‡
DISABLE_SC
RW
When this bit is set, the Smart Card function is completely nonaccessible and nonfunctional.
6‡
DISABLE_SD
RW
When this bit is set, the SD host controller function is completely nonaccessible and nonfunctional.
5‡
DISABLE_FM
RW
When this bit is set, the flash media function is completely nonaccessible and nonfunctional.
4‡
DISABLE_SKTB
RW
When this bit is set, CardBus socket B (function 1) is completely nonaccessible and nonfunctional.
3‡
DISABLE_OHCI
RW
When this bit is set, the OHCI 1394 controller function is completely nonaccessible and nonfunctional.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−21
Table 4−9. General Control Register Description (Continued)
BIT
2‡
1−0 ‡
SIGNAL
DED_SC_PWR_
CTRL
ARB_CTRL
TYPE
FUNCTION
RW
Dedicated Smart Card power control. This bit determines how power to the dedicated Smart Card
socket is controlled.
0 = Controlled through the SC_PWR_CTRL terminal (default)
1 = Controlled through the VPP voltage of socket B of the CardBus power switch (the design
must ensure that this mode can only be set when CardBus socket B is disabled).
Controls top level PCI arbitration:
00 = 1394 OHCI priority
01 = CardBus priority
RW
10 = Flash media/SD host priority
11 = Fair round robin
Note: When flash media/SD host priority is selected, there must be a two-level priority scheme with the
first level being a round robin between the flash media and SD host functions and the second level being
a round robin between the CardBus and 1394 functions.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4.32 General-Purpose Event Status Register
The general-purpose event status register contains status bits that are set when general events occur, and can be
programmed to generate general-purpose event signaling through GPE. See Table 4−10 for a complete description
of the register contents.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
General-purpose event status
RCU
RCU
R
RCU
RCU
RCU
RCU
RCU
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
General-purpose event status
88h
Read/Clear/Update, Read-only
00h
Table 4−10. General-Purpose Event Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
7‡
PWR_STS
RCU
Power change status. This bit is set when software changes the VCC or VPP power state of either socket.
6‡
VPP12_STS
RCU
12-V VPP request status. This bit is set when software has changed the requested VPP level to or from 12 V
for either socket.
5
RSVD
R
4‡
GP4_STS
RCU
GPI4 status. This bit is set on a change in status of the MFUNC5 terminal input level if configured as a
general-purpose input, GPI4.
3‡
GP3_STS
RCU
GPI3 status. This bit is set on a change in status of the MFUNC4 terminal input level if configured as a
general-purpose input, GPI3.
2‡
GP2_STS
RCU
GPI2 status. This bit is set on a change in status of the MFUNC2 terminal input level if configured as a
general-purpose input, GPI2.
1‡
GP1_STS
RCU
GPI1 status. This bit is set on a change in status of the MFUNC1 terminal input level if configured as a
general-purpose input, GPI1.
0‡
GP0_STS
RCU
GPI0 status. This bit is set on a change in status of the MFUNC0 terminal input level if configured as a
general-purpose input, GPI0.
Reserved. This bit returns 0 when read. A write has no effect.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−22
4.33 General-Purpose Event Enable Register
The general-purpose event enable register contains bits that are set to enable GPE signals. See Table 4−11 for a
complete description of the register contents.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
General-purpose event enable
RW
RW
R
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
General-purpose event enable
89h
Read-only, Read/Write
00h
Table 4−11. General-Purpose Event Enable Register Description
BIT
SIGNAL
TYPE
FUNCTION
7‡
PWR_EN
RW
Power change GPE enable. When this bit is set, GPE is signaled on PWR_STS events.
6‡
VPP12_EN
RW
12-V VPP GPE enable. When this bit is set, GPE is signaled on VPP12_STS events.
5
RSVD
R
4‡
GP4_EN
RW
GPI4 GPE enable. When this bit is set, GPE is signaled on GP4_STS events.
3‡
GP3_EN
RW
GPI3 GPE enable. When this bit is set, GPE is signaled on GP3_STS events.
2‡
GP2_EN
RW
GPI2 GPE enable. When this bit is set, GPE is signaled on GP2_STS events.
1‡
GP1_EN
RW
GPI1 GPE enable. When this bit is set, GPE is signaled on GP1_STS events.
0‡
GP0_EN
RW
GPI0 GPE enable. When this bit is set, GPE is signaled on GP0_STS events.
Reserved. This bit returns 0 when read. A write has no effect.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4.34 General-Purpose Input Register
The general-purpose input register contains the logical value of the data input to the GPI terminals. See Table 4−12
for a complete description of the register contents.
Bit
7
6
5
Type
R
R
R
RU
Default
0
0
0
X
Name
4
3
2
1
0
RU
RU
RU
RU
X
X
X
X
General-purpose input
Register:
Offset:
Type:
Default:
General-purpose input
8Ah
Read/Update, Read-only
XXh
Table 4−12. General-Purpose Input Register Description
BIT
SIGNAL
TYPE
7−5
RSVD
R
FUNCTION
4
GPI4_DATA
RU
GPI4 data input. This bit represents the logical value of the data input from GPI4.
3
GPI3_DATA
RU
GPI3 data input. This bit represents the logical value of the data input from GPI3.
2
GPI2_DATA
RU
GPI2 data input. This bit represents the logical value of the data input from GPI2.
1
GPI1_DATA
RU
GPI1 data input. This bit represents the logical value of the data input from GPI1.
0
GPI0_DATA
RU
GPI0 data input. This bit represents the logical value of the data input from GPI0.
Reserved. These bits return 0s when read. Writes have no effect.
4−23
4.35 General-Purpose Output Register
The general-purpose output register is used to drive the GPO4−GPO0 outputs. See Table 4−13 for a complete
description of the register contents.
Bit
7
6
5
Name
4
3
2
1
0
General-purpose output
Type
R
R
R
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
General-purpose output
8Bh
Read-only, Read/Write
00h
Table 4−13. General-Purpose Output Register Description
BIT
SIGNAL
TYPE
FUNCTION
7−5
RSVD
R
4‡
GPO4_DATA
RW
Reserved. These bits return 0s when read. Writes have no effect.
This bit represents the logical value of the data driven to GPO4.
3‡
GPO3_DATA
RW
This bit represents the logical value of the data driven to GPO3.
2‡
GPO2_DATA
RW
This bit represents the logical value of the data driven to GPO2.
1‡
GPO1_DATA
RW
This bit represents the logical value of the data driven to GPO1.
0‡
GPO0_DATA
RW
This bit represents the logical value of the data driven to GPO0.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−24
4.36 Multifunction Routing Status Register
The multifunction routing status register is used to configure the MFUNC6−MFUNC0 terminals. These terminals may
be configured for various functions. This register is intended to be programmed once at power-on initialization. The
default value for this register can also be loaded through a serial EEPROM. See Table 4−14 for a complete description
of the register contents.
Bit
31
30
29
28
27
26
Name
25
24
23
22
21
20
19
18
17
16
Multifunction routing status
Type
R
RW
RW
RW
R
RW
RW
RW
R
RW
RW
RW
R
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Multifunction routing status
Type
R
RW
RW
RW
R
RW
RW
RW
R
RW
RW
RW
R
RW
RW
RW
Default
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Multifunction routing status
8Ch
Read/Write, Read-only
0000 1000h
Table 4−14. Multifunction Routing Status Register Description
BIT
SIGNAL
TYPE
31−28 ‡
RSVD
R
27−24 ‡
23−20 ‡
MFUNC6
MFUNC5
FUNCTION
Bits 31−28 return 0s when read.
RW
Multifunction terminal 6 configuration. These bits control the internal signal mapped to the MFUNC6 terminal
as follows:
0000 = RSVD
0100 = IRQ4
1000 = IRQ8
1100 = IRQ12
0001 = CLKRUN
0101 = IRQ5
1001 = IRQ9
1101 = IRQ13
0010 = IRQ2
0110 = IRQ6
1010 = IRQ10
1110 = IRQ14
0011 = IRQ3
0111 = IRQ7
1011 = IRQ11
1111 = IRQ15
RW
Multifunction terminal 5 configuration. These bits control the internal signal mapped to the MFUNC5 terminal
as follows:
0000 = GPI4
0100 = SC_DBG_RX 1000 = CAUDPWM
1100 = LEDA1
0001 = GPO4
0101 = IRQ5
1001 = IRQ9
1101 = LED_SKT
0010 = PCGNT
0110 = RSVD
1010 = FM_LED
1110 = GPE
0011 = IRQ3
0111 = RSVD
1011 = OHCI_LED
1111 = IRQ15
Multifunction terminal 4 configuration. These bits control the internal signal mapped to the MFUNC4 terminal
as follows:
19−16 ‡
15−12 ‡
11−8 ‡
MFUNC4
MFUNC3
MFUNC2
RW
0000 = GPI3
0001 = GPO3
0010 = LOCK PCI
0011 = IRQ3
0100 = IRQ4
0101 = SC_DBG_TX
0110 = RSVD
0111 = RSVD
1000 = CAUDPWM
1001 = IRQ9
1010 = INTD
1011 = FM_LED
1100 = RI_OUT
1101 = LED_SKT
1110 = GPE
1111 = IRQ15
RW
Multifunction terminal 3 configuration. These bits control the internal signal mapped to the MFUNC3 terminal
as follows:
0000 = RSVD
0100 = IRQ4
1000 = IRQ8
1100 = IRQ12
0001 = IRQSER
0101 = IRQ5
1001 = IRQ9
1101 = IRQ13
0010 = IRQ2
0110 = IRQ6
1010 = IRQ10
1110 = IRQ14
0011 = IRQ3
0111 = IRQ7
1011 = IRQ11
1111 = IRQ15
RW
Multifunction terminal 2 configuration. These bits control the internal signal mapped to the MFUNC2 terminal
as follows:
0000 = GPI2
0100 = IRQ4
1000 = CAUDPWM
1100 = RI_OUT
0001 = GPO2
0101 = IRQ5
1001 = FM_LED
1101 = TEST_MUX
0010 = PCREQ
0110 = RSVD
1010 = IRQ10
1110 = GPE
0011 = IRQ3
0111 = RSVD
1011 = INTC
1111 = IRQ7
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−25
Table 4−14. Multifunction Routing Status Register Description (Continued)
BIT
7−4 ‡
3−0 ‡
SIGNAL
MFUNC1
MFUNC0
TYPE
FUNCTION
RW
Multifunction terminal 1 configuration. These bits control the internal signal mapped to the MFUNC1 terminal
as follows:
0000 = GPI1
0100 = OHCI_LED 1000 = CAUDPWM
1100 = LEDA1
0001 = GPO1
0101 = IRQ5
1001 = IRQ9
1101 = LEDA2
0110 = RSVD
1010 = IRQ10
1110 = GPE
0010 = INTB
0011 = IRQ3
0111 = RSVD
1011 = IRQ11
1111 = IRQ15
RW
Multifunction terminal 0 configuration. These bits control the internal signal mapped to the MFUNC0 terminal
as follows:
0000 = GPI0
0100 = IRQ4
1000 = CAUDPWM
1100 = LEDA1
0001 = GPO0
0101 = IRQ5
1001 = IRQ9
1101 = LEDA2
0110 = RSVD
1010 = IRQ10
1110 = GPE
0010 = INTA
0011 = IRQ3
0111 = RSVD
1011 = IRQ11
1111 = IRQ15
‡ One or more bits in this register are cleared only by the assertion of GRST.
4.37 Retry Status Register
The contents of the retry status register enable the retry time-out counters and display the retry expiration status. The
flags are set when the PCI6x21/PCI6x11 controller, as a master, receives a retry and does not retry the request within
215 clock cycles. The flags are cleared by writing a 1 to the bit. Access this register only through function 0. See
Table 4−15 for a complete description of the register contents.
Bit
7
6
5
4
3
2
1
0
RW
RW
RC
R
1
1
0
RC
R
RC
R
0
0
0
0
0
Name
Type
Default
Retry status
Register:
Offset:
Type:
Default:
Retry status
90h (Functions 0, 1)
Read-only, Read/Write, Read/Clear
C0h
Table 4−15. Retry Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
7‡
PCIRETRY
RW
PCI retry time-out counter enable. This bit is encoded as:
0 = PCI retry counter disabled
1 = PCI retry counter enabled (default)
6 ‡§
CBRETRY
RW
CardBus retry time-out counter enable. This bit is encoded as:
0 = CardBus retry counter disabled
1 = CardBus retry counter enabled (default)
5‡
TEXP_CBB
RC
CardBus target B retry expired. Write a 1 to clear this bit.
0 = Inactive (default)
1 = Retry has expired.
4
RSVD
R
3 ‡§
TEXP_CBA
RC
2
RSVD
R
1‡
TEXP_PCI
RC
0
RSVD
R
Reserved. This bit returns 0 when read.
CardBus target A retry expired. Write a 1 to clear this bit.
0 = Inactive (default)
1 = Retry has expired.
Reserved. This bit returns 0 when read.
PCI target retry expired. Write a 1 to clear this bit.
0 = Inactive (default)
1 = Retry has expired.
Reserved. This bit returns 0 when read.
‡ One or more bits in this register are cleared only by the assertion of GRST.
§ These bits are global in nature and must be accessed only through function 0.
4−26
4.38 Card Control Register
The card control register is provided for PCI1130 compatibility. RI_OUT is enabled through this register, and the
enable bit is shared between functions 0 and 1. See Table 4−16 for a complete description of the register contents.
The RI_OUT signal is enabled through this register, and the enable bit is shared between functions 0 and 1.
Bit
7
6
5
4
3
2
1
0
RW
RW
RW
R
R
RW
RW
RW
0
0
0
0
0
0
0
0
Name
Type
Default
Card control
Register:
Offset:
Type:
Default:
Card control
91h
Read-only, Read/Write
00h
Table 4−16. Card Control Register Description
BIT
SIGNAL
TYPE
7 ‡§
RIENB
RW
Ring indicate enable. When this bit is 1, the RI_OUT output is enabled. This bit defaults to 0.
6−3
RSVD
RW
These bits are reserved. Do not change the value of these bits.
2‡
1‡
AUD2MUX
SPKROUTEN
RW
RW
FUNCTION
CardBus audio-to-MFUNC. When this bit is set, the CAUDIO CardBus signal must be routed through an
MFUNC terminal. If this bit is set for both functions, then function 0 is routed.
0 = CAUDIO set to CAUDPWM on MFUNC terminal (default)
1 = CAUDIO is not routed.
When bit 1 is set, the SPKR terminal from the PC Card is enabled and is routed to tthe SPKROUT terminal.
The SPKR signal from socket 0 is XORed with the SPKR signal from socket 1 and sent to SPKROUT. The
SPKROUT terminal drives data only when the SPKROUTEN bit of either function is set. This bit is encoded
as:
0 = SPKR to SPKROUT not enabled (default)
1 = SPKR to SPKROUT enabled
0‡
IFG
RW
Interrupt flag. This bit is the interrupt flag for 16-bit I/O PC Cards and for CardBus cards. This bit is set when
a functional interrupt is signaled from a PC Card interface, and is socket dependent (i.e., not global). Write
back a 1 to clear this bit.
0 = No PC Card functional interrupt detected (default)
1 = PC Card functional interrupt detected
‡ One or more bits in this register are cleared only by the assertion of GRST.
§ This bit is global in nature and must be accessed only through function 0.
4−27
4.39 Device Control Register
The device control register is provided for PCI1130 compatibility. It contains bits that are shared between functions
0 and 1. The interrupt mode select is programmed through this register. The socket-capable force bits are also
programmed through this register. See Table 4−17 for a complete description of the register contents.
Bit
7
6
5
4
Name
Type
Default
3
2
1
0
Device control
RW
RW
RW
R
RW
RW
RW
RW
0
1
1
0
0
1
1
0
Register:
Offset:
Type:
Default:
Device control
92h (Functions 0, 1)
Read-only, Read/Write
66h
Table 4−17. Device Control Register Description
BIT
SIGNAL
TYPE
FUNCTION
7‡
SKTPWR_LOCK
RW
Socket power lock bit. When this bit is set to 1, software cannot power down the PC Card socket while
in D3. It may be necessary to lock socket power in order to support wake on LAN or RING if the
operating system is programmed to power down a socket when the CardBus controller is placed in the
D3 state.
6 ‡§
3VCAPABLE
RW
3-V socket capable force bit.
0 = Not 3-V capable
1 = 3-V capable (default)
5‡
IO16R2
RW
Diagnostic bit. This bit defaults to 1.
4
RSVD
R
3 ‡§
TEST
RW
TI test bit. Write only 0 to this bit.
Reserved. This bit returns 0 when read. A write has no effect.
2−1 ‡§
INTMODE
RW
Interrupt mode. These bits select the interrupt signaling mode. The interrupt mode bits are encoded:
00 = Parallel PCI interrupts only
01 = Reserved
10 = IRQ serialized interrupts and parallel PCI interrupts INTA, INTB, INTC, and INTD
11 = IRQ and PCI serialized interrupts (default)
0 ‡§
RSVD
RW
Reserved. Bit 0 is reserved for test purposes. Only a 0 must be written to this bit.
‡ One or more bits in this register are cleared only by the assertion of GRST.
§ These bits are global in nature and must be accessed only through function 0.
4−28
4.40 Diagnostic Register
The diagnostic register is provided for internal TI test purposes. It is a read/write register, but only 0s must be written
to it. See Table 4−18 for a complete description of the register contents.
Bit
7
6
5
4
3
2
1
0
RW
R
RW
RW
RW
RW
RW
RW
0
1
1
0
0
0
0
0
Name
Type
Default
Diagnostic
Register:
Offset:
Type:
Default:
Diagnostic
93h (functions 0, 1)
Read/Write
60h
Table 4−18. Diagnostic Register Description
BIT
SIGNAL
TYPE
7 ‡§
TRUE_VAL
RW
6‡
RSVD
R
FUNCTION
This bit defaults to 0. This bit is encoded as:
0 = Reads true values in PCI vendor ID and PCI device ID registers (default)
1 = Returns all 1s to reads from the PCI vendor ID and PCI device ID registers
Reserved. This bit is read-only and returns 1 when read.
5‡
CSC
RW
CSC interrupt routing control
0 = CSC interrupts routed to PCI if ExCA 803 bit 4 = 1
1 = CSC interrupts routed to PCI if ExCA 805 bits 7−4 = 0000b (default).
In this case, the setting of ExCA 803 bit 4 is a don’t care.
4 ‡§
DIAG4
RW
Diagnostic RETRY_DIS. Delayed transaction disable.
3 ‡§
DIAG3
RW
2 ‡§
DIAG2
RW
Diagnostic RETRY_EXT. Extends the latency from 16 to 64.
Diagnostic DISCARD_TIM_SEL_CB. Set = 210, reset = 215.
1 ‡§
DIAG1
RW
Diagnostic DISCARD_TIM_SEL_PCI. Set = 210, reset = 215.
0‡
RSVD
RW
These bits are reserved. Do not change the value of these bits.
‡ One or more bits in this register are cleared only by the assertion of GRST.
§ This bit is global and is accessed only through function 0.
4−29
4.41 Capability ID Register
The capability ID register identifies the linked list item as the register for PCI power management. The register returns
01h when read, which is the unique ID assigned by the PCI SIG for the PCI location of the capabilities pointer and
the value.
Bit
7
6
5
4
Name
3
2
1
0
Capability ID
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
1
Register:
Offset:
Type:
Default:
Capability ID
A0h
Read-only
01h
4.42 Next Item Pointer Register
The contents of this register indicate the next item in the linked list of the PCI power management capabilities.
Because the PCI6x21/PCI6x11 functions only include one capabilities item, this register returns 0s when read.
Bit
7
6
5
4
Type
R
R
R
R
Default
0
0
0
0
Name
2
1
0
R
R
R
R
0
0
0
0
Next item pointer
Register:
Offset:
Type:
Default:
4−30
3
Next item pointer
A1h
Read-only
00h
4.43 Power Management Capabilities Register
The power management capabilities register contains information on the capabilities of the PC Card function related
to power management. Both PCI6x21/PCI6x11 CardBus bridge functions support D0, D1, D2, and D3 power states.
Default register value is FE12h for operation in accordance with PCI Bus Power Management Interface Specification
revision 1.1. See Table 4−19 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Power management capabilities
RW
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
1
1
1
1
1
1
1
0
0
0
0
1
0
0
1
0
Register:
Offset:
Type:
Default:
Power management capabilities
A2h (Functions 0, 1)
Read-only, Read/Write
FE12h
Table 4−19. Power Management Capabilities Register Description
BIT
SIGNAL
TYPE
FUNCTION
This 5-bit field indicates the power states from which the PCI6x21/PCI6x11 controller functions can assert
PME. A 0 for any bit indicates that the function cannot assert the PME signal while in that power state.
These 5 bits return 11111b when read. Each of these bits is described below:
15 ‡
RW
PME support
14−11
Bit 15 − defaults to a 1 indicating the PME signal can be asserted from the D3cold state. This bit is read/write
because wake-up support from D3cold is contingent on the system providing an auxiliary power source
to the VCC terminals. If the system designer chooses not to provide an auxiliary power source to the VCC
terminals for D3cold wake-up support, then BIOS must write a 0 to this bit.
R
Bit 14 − contains the value 1 to indicate that the PME signal can be asserted from the D3hot state.
Bit 13 − contains the value 1 to indicate that the PME signal can be asserted from the D2 state.
Bit 12 − contains the value 1 to indicate that the PME signal can be asserted from the D1 state.
Bit 11 − contains the value 1 to indicate that the PME signal can be asserted from the D0 state.
10
D2_Support
R
This bit returns a 1 when read, indicating that the function supports the D2 device power state.
9
D1_Support
R
This bit returns a 1 when read, indicating that the function supports the D1 device power state.
8−6
RSVD
R
Reserved. These bits return 000b when read.
5
DSI
R
Device-specific initialization. This bit returns 0 when read.
Auxiliary power source. This bit is meaningful only if bit 15 (D3cold supporting PME) is set. When this bit
is set, it indicates that support for PME in D3cold requires auxiliary power supplied by the system by way
of a proprietary delivery vehicle.
4
AUX_PWR
R
A 0 (zero) in this bit field indicates that the function supplies its own auxiliary power source.
If the function does not support PME while in the D3cold state (bit 15=0), then this field must always return
0.
3
PMECLK
R
When this bit is 1, it indicates that the function relies on the presence of the PCI clock for PME operation.
When this bit is 0, it indicates that no PCI clock is required for the function to generate PME.
Functions that do not support PME generation in any state must return 0 for this field.
2−0
Version
R
These 3 bits return 010b when read, indicating that there are 4 bytes of general-purpose power
management (PM) registers as described in draft revision 1.1 of the PCI Bus Power Management Interface
Specification.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−31
4.44 Power Management Control/Status Register
The power management control/status register determines and changes the current power state of the
PCI6x21/PCI6x11 CardBus function. The contents of this register are not affected by the internally generated reset
caused by the transition from the D3hot to D0 state. See Table 4−20 for a complete description of the register contents.
All PCI registers, ExCA registers, and CardBus registers are reset as a result of a D3hot-to-D0 state transition, with
the exception of the PME context bits (if PME is enabled) and the GRST only bits.
Bit
15
14
13
12
11
10
RWC
R
R
R
R
R
R
RW
R
0
0
0
0
0
0
0
0
0
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
R
R
R
R
R
RW
RW
0
0
0
0
0
0
0
Power management control/status
Register:
Offset:
Type:
Default:
Power management control/status
A4h (Functions 0, 1)
Read-only, Read/Write, Read/Write/Clear
0000h
Table 4−20. Power Management Control/Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
PME status. This bit is set when the CardBus function would normally assert the PME signal, independent
of the state of the PME_EN bit. This bit is cleared by a writeback of 1, and this also clears the PME signal
if PME was asserted by this function. Writing a 0 to this bit has no effect.
15 †
PMESTAT
RC
14−13
DATASCALE
R
This 2-bit field returns 0s when read. The CardBus function does not return any dynamic data.
12−9
DATASEL
R
Data select. This 4-bit field returns 0s when read. The CardBus function does not return any dynamic data.
8‡
PME_ENABLE
RW
This bit enables the function to assert PME. If this bit is cleared, then assertion of PME is disabled. This
bit is not cleared by the assertion of PRST. It is only cleared by the assertion of GRST.
7−2
RSVD
R
Reserved. These bits return 0s when read.
Power state. This 2-bit field is used both to determine the current power state of a function and to set the
function into a new power state. This field is encoded as:
1−0
PWRSTATE
RW
00 = D0
01 = D1
10 = D2
11 = D3hot
† One or more bits in this register are PME context bits and can be cleared only by the assertion of GRST when PME is enabled. If PME is not
enabled, then this bit is cleared by the assertion of PRST or GRST.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−32
4.45 Power Management Control/Status Bridge Support Extensions Register
This register supports PCI bridge-specific functionality. It is required for all PCI-to-PCI bridges. See Table 4−21 for
a complete description of the register contents.
Bit
7
6
Name
5
4
3
2
1
0
Power management control/status bridge support extensions
Type
R
R
R
R
R
R
R
R
Default
1
1
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Power management control/status bridge support extensions
A6h (Functions 0, 1)
Read-only
C0h
Table 4−21. Power Management Control/Status Bridge Support Extensions Register Description
BIT
SIGNAL
TYPE
FUNCTION
Bus power/clock control enable. This bit returns 1 when read. This bit is encoded as:
0 = Bus power/clock control is disabled.
1 = Bus power/clock control is enabled (default).
7
BPCC_EN
A 0 indicates that the bus power/clock control policies defined in the PCI Bus Power Management Interface
Specification are disabled. When the bus power/clock control enable mechanism is disabled, the power
state field (bits 1−0) of the power management control/status register (PCI offset A4h, see Section 4.44)
cannot be used by the system software to control the power or the clock of the secondary bus. A 1 indicates
that the bus power/clock control mechanism is enabled.
R
6
B2_B3
R
B2/B3 support for D3hot. The state of this bit determines the action that is to occur as a direct result of
programming the function to D3hot. This bit is only meaningful if bit 7 (BPCC_EN) is a 1. This bit is encoded
as:
0 = When the bridge is programmed to D3hot, its secondary bus has its power removed (B3).
1 = When the bridge function is programmed to D3hot, its secondary bus PCI clock is stopped (B2)
(default).
5−0
RSVD
R
Reserved. These bits return 0s when read.
4.46 Power-Management Data Register
The power-management data register returns 0s when read, because the CardBus functions do not report dynamic
data.
Bit
7
6
5
Type
R
R
R
R
Default
0
0
0
0
Name
4
3
2
1
0
R
R
R
R
0
0
0
0
Power-management data
Register:
Offset:
Type:
Default:
Power-management data
A7h (functions 0, 1)
Read-only
00h
4−33
4.47 Serial Bus Data Register
The serial bus data register is for programmable serial bus byte reads and writes. This register represents the data
when generating cycles on the serial bus interface. To write a byte, this register must be programmed with the data,
the serial bus index register must be programmed with the byte address, the serial bus slave address must be
programmed with the 7-bit slave address, and the read/write indicator bit must be reset.
On byte reads, the byte address is programmed into the serial bus index register, the serial bus slave address register
must be programmed with both the 7-bit slave address and the read/write indicator bit, and bit 5 (REQBUSY) in the
serial bus control and status register (see Section 4.50) must be polled until clear. Then the contents of this register
are valid read data from the serial bus interface. See Table 4−22 for a complete description of the register contents.
Bit
7
6
5
4
Name
Type
Default
3
2
1
0
Serial bus data
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Serial bus data
B0h (function 0)
Read/Write
00h
Table 4−22. Serial Bus Data Register Description
BIT
7−0 ‡
SIGNAL
SBDATA
TYPE
FUNCTION
RW
Serial bus data. This bit field represents the data byte in a read or write transaction on the serial interface.
On reads, the REQBUSY bit must be polled to verify that the contents of this register are valid.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4.48 Serial Bus Index Register
The serial bus index register is for programmable serial bus byte reads and writes. This register represents the byte
address when generating cycles on the serial bus interface. To write a byte, the serial bus data register must be
programmed with the data, this register must be programmed with the byte address, and the serial bus slave address
must be programmed with both the 7-bit slave address and the read/write indicator.
On byte reads, the word address is programmed into this register, the serial bus slave address must be programmed
with both the 7-bit slave address and the read/write indicator bit, and bit 5 (REQBUSY) in the serial bus control and
status register (see Section 4.50) must be polled until clear. Then the contents of the serial bus data register are valid
read data from the serial bus interface. See Table 4−23 for a complete description of the register contents.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
Serial bus index
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Serial bus index
B1h (function 0)
Read/Write
00h
Table 4−23. Serial Bus Index Register Description
BIT
SIGNAL
TYPE
FUNCTION
7−0 ‡
SBINDEX
RW
Serial bus index. This bit field represents the byte address in a read or write transaction on the serial interface.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−34
4.49 Serial Bus Slave Address Register
The serial bus slave address register is for programmable serial bus byte read and write transactions. To write a byte,
the serial bus data register must be programmed with the data, the serial bus index register must be programmed
with the byte address, and this register must be programmed with both the 7-bit slave address and the read/write
indicator bit.
On byte reads, the byte address is programmed into the serial bus index register, this register must be programmed
with both the 7-bit slave address and the read/write indicator bit, and bit 5 (REQBUSY) in the serial bus control and
status register (see Section 4.50) must be polled until clear. Then the contents of the serial bus data register are valid
read data from the serial bus interface. See Table 4−24 for a complete description of the register contents.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
Serial bus slave address
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Serial bus slave address
B2h (function 0)
Read/Write
00h
Table 4−24. Serial Bus Slave Address Register Description
BIT
SIGNAL
TYPE
FUNCTION
7−1 ‡
SLAVADDR
RW
Serial bus slave address. This bit field represents the slave address of a read or write transaction on the
serial interface.
0‡
RWCMD
RW
Read/write command. Bit 0 indicates the read/write command bit presented to the serial bus on byte read
and write accesses.
0 = A byte write access is requested to the serial bus interface.
1 = A byte read access is requested to the serial bus interface.
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−35
4.50 Serial Bus Control/Status Register
The serial bus control and status register communicates serial bus status information and selects the quick command
protocol. Bit 5 (REQBUSY) in this register must be polled during serial bus byte reads to indicate when data is valid
in the serial bus data register. See Table 4−25 for a complete description of the register contents.
Bit
7
6
5
RW
R
R
R
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RC
RC
0
0
0
0
Serial bus control/status
Register:
Offset:
Type:
Default:
Serial bus control/status
B3h (function 0)
Read-only, Read/Write, Read/Clear
00h
Table 4−25. Serial Bus Control/Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
Protocol select. When bit 7 is set, the send-byte protocol is used on write requests and the receive-byte
protocol is used on read commands. The word address byte in the serial bus index register (see
Section 4.48) is not output by the PCI6x21/PCI6x11 controller when bit 7 is set.
7‡
PROT_SEL
RW
6
RSVD
R
Reserved. Bit 6 returns 0 when read.
5
REQBUSY
R
Requested serial bus access busy. Bit 5 indicates that a requested serial bus access (byte read or write)
is in progress. A request is made, and bit 5 is set, by writing to the serial bus slave address register (see
Section 4.49). Bit 5 must be polled on reads from the serial interface. After the byte read access has been
completed, this bit is cleared and the read data is valid in the serial bus data register.
4
ROMBUSY
R
Serial EEPROM busy status. Bit 4 indicates the status of the PCI6x21/PCI6x11 serial EEPROM circuitry.
Bit 4 is set during the loading of the subsystem ID and other default values from the serial bus EEPROM.
0 = Serial EEPROM circuitry is not busy
1 = Serial EEPROM circuitry is busy
3‡
SBDETECT
RW
Serial bus detect. When the serial bus interface is detected through a pullup resistor on the SCL terminal
after reset, this bit is set to 1.
0 = Serial bus interface not detected
1 = Serial bus interface detected
2‡
SBTEST
RW
Serial bus test. When bit 2 is set, the serial bus clock frequency is increased for test purposes.
0 = Serial bus clock at normal operating frequency, 100 kHz (default)
1 = Serial bus clock frequency increased for test purposes
RC
Requested serial bus access error. Bit 1 indicates when a data error occurs on the serial interface during
a requested cycle and may be set due to a missing acknowledge. Bit 1 is cleared by a writeback of 1.
0 = No error detected during user-requested byte read or write cycle
1 = Data error detected during user-requested byte read or write cycle
RC
EEPROM data error status. Bit 0 indicates when a data error occurs on the serial interface during the
auto-load from the serial bus EEPROM and may be set due to a missing acknowledge. Bit 0 is also set on
invalid EEPROM data formats. See Section 3.6.4, Serial Bus EEPROM Application, for details on
EEPROM data format. Bit 0 is cleared by a writeback of 1.
0 = No error detected during autoload from serial bus EEPROM
1 = Data error detected during autoload from serial bus EEPROM
1‡
0‡
REQ_ERR
ROM_ERR
‡ One or more bits in this register are cleared only by the assertion of GRST.
4−36
5 ExCA Compatibility Registers (Functions 0 and 1)
The ExCA (exchangeable card architecture) registers implemented in the PCI6x21/PCI6x11 controller are
register-compatible with the Intel 82365SL-DF PCMCIA controller. ExCA registers are identified by an offset value,
which is compatible with the legacy I/O index/data scheme used on the Intel 82365 ISA controller. The ExCA
registers are accessed through this scheme by writing the register offset value into the index register (I/O base), and
reading or writing the data register (I/O base + 1). The I/O base address used in the index/data scheme is programmed
in the PC Card 16-bit I/F legacy mode base address register, which is shared by both card sockets. The offsets from
this base address run contiguously from 00h to 3Fh for socket A, and from 40h to 7Fh for socket B. See Figure 5−1
for an ExCA I/O mapping illustration. Table 5−1 identifies each ExCA register and its respective ExCA offset.
The PCI6x21/PCI6x11 controller also provides a memory-mapped alias of the ExCA registers by directly mapping
them into PCI memory space. They are located through the CardBus socket registers/ExCA registers base address
register (PCI register 10h) at memory offset 800h. Each socket has a separate base address programmable by
function. See Figure 5−2 for an ExCA memory mapping illustration. Note that memory offsets are 800h−844h for both
functions 0 and 1. This illustration also identifies the CardBus socket register mapping, which is mapped into the same
4K window at memory offset 0h.
The interrupt registers in the ExCA register set, as defined by the 82365SL specification, control such card functions
as reset, type, interrupt routing, and interrupt enables. Special attention must be paid to the interrupt routing registers
and the host interrupt signaling method selected for the PCI6x21/PCI6x11 controller to ensure that all possible
PCI6x21/PCI6x11 interrupts can potentially be routed to the programmable interrupt controller. The ExCA registers
that are critical to the interrupt signaling are at memory address ExCA offsets 803h and 805h.
Access to I/O mapped 16-bit PC Cards is available to the host system via two ExCA I/O windows. These are regions
of host I/O address space into which the card I/O space is mapped. These windows are defined by start, end, and
offset addresses programmed in the ExCA registers described in this chapter. I/O windows have byte granularity.
Access to memory-mapped 16-bit PC Cards is available to the host system via five ExCA memory windows. These
are regions of host memory space into which the card memory space is mapped. These windows are defined by start,
end, and offset addresses programmed in the ExCA registers described in this chapter. Memory windows have
4-Kbyte granularity.
A bit location followed by a ‡ means that this bit is not cleared by the assertion of PRST. This bit is only cleared by
the assertion of GRST. This is necessary to retain device context during the transition from D3 to D0.
5−1
Host I/O Space
Offset
PCI6x21/PCI6x11 Configuration Registers
Offset
00h
PC Card A
ExCA
Registers
CardBus Socket/ExCA Base Address
10h
Index
3Fh
Data
16-Bit Legacy-Mode Base Address
40h
44h
PC Card B
ExCA
Registers
7Fh
Note: The 16-bit legacy-mode base address
register is shared by function 0 and 1 as
indicated by the shading.
Offset of desired register is placed in the index register and the
data from that location is returned in the data register.
Figure 5−1. ExCA Register Access Through I/O
PCI6x21/PCI6x11 Configuration Registers
Offset
Host
Memory Space
Offset
Host
Memory Space
Offset
00h
CardBus Socket/ExCA Base Address
10h
CardBus
Socket A
Registers
20h
00h
16-Bit Legacy-Mode Base Address
44h
ExCA
Registers
Card A
800h
CardBus
Socket B
Registers
20h
844h
800h
ExCA
Registers
Card B
Note: The CardBus socket/ExCA base
address mode register is separate for
functions 0 and 1.
Offsets are from the CardBus socket/ExCA base
address register’s base address.
Figure 5−2. ExCA Register Access Through Memory
5−2
844h
Table 5−1. ExCA Registers and Offsets
PCI MEMORY ADDRESS
OFFSET (HEX)
EXCA OFFSET
(CARD A)
EXCA OFFSET
(CARD B)
800
00
40
Interface status
801
01
41
Power control †
802†
02
42
Interrupt and general control †
803†
03
43
Card status change †
804†
04
44
Card status change interrupt configuration †
805†
05
45
Address window enable
806
06
46
I / O window control
807
07
47
I / O window 0 start-address low-byte
808
08
48
I / O window 0 start-address high-byte
809
09
49
I / O window 0 end-address low-byte
80A
0A
4A
EXCA REGISTER NAME
Identification and revision ‡
I / O window 0 end-address high-byte
80B
0B
4B
I / O window 1 start-address low-byte
80C
0C
4C
I / O window 1 start-address high-byte
80D
0D
4D
I / O window 1 end-address low-byte
80E
0E
4E
I / O window 1 end-address high-byte
80F
0F
4F
Memory window 0 start-address low-byte
810
10
50
Memory window 0 start-address high-byte
811
11
51
Memory window 0 end-address low-byte
812
12
52
Memory window 0 end-address high-byte
813
13
53
Memory window 0 offset-address low-byte
814
14
54
Memory window 0 offset-address high-byte
815
15
55
Card detect and general control †
816
16
56
Reserved
817
17
57
Memory window 1 start-address low-byte
818
18
58
Memory window 1 start-address high-byte
819
19
59
Memory window 1 end-address low-byte
81A
1A
5A
Memory window 1 end-address high-byte
81B
1B
5B
Memory window 1 offset-address low-byte
81C
1C
5C
Memory window 1 offset-address high-byte
81D
1D
5D
Global control ‡
81E
1E
5E
Reserved
81F
1F
5F
Memory window 2 start-address low-byte
820
20
60
Memory window 2 start-address high-byte
821
21
61
Memory window 2 end-address low-byte
822
22
62
Memory window 2 end-address high-byte
823
23
63
Memory window 2 offset-address low-byte
824
24
64
Memory window 2 offset-address high-byte
825
25
65
† One or more bits in this register are cleared only by the assertion of GRST when PME is enabled. If PME is not enabled, then this bit is cleared
by the assertion of PRST or GRST.
‡ One or more bits in this register are cleared only by the assertion of GRST.
5−3
Table 5−1. ExCA Registers and Offsets (continued)
PCI MEMORY ADDRESS
OFFSET (HEX)
EXCA OFFSET
(CARD A)
EXCA OFFSET
(CARD B)
Reserved
826
26
66
Reserved
827
27
67
Memory window 3 start-address low-byte
828
28
68
EXCA REGISTER NAME
Memory window 3 start-address high-byte
829
29
69
Memory window 3 end-address low-byte
82A
2A
6A
Memory window 3 end-address high-byte
82B
2B
6B
Memory window 3 offset-address low-byte
82C
2C
6C
Memory window 3 offset-address high-byte
82D
2D
6D
Reserved
82E
2E
6E
Reserved
82F
2F
6F
Memory window 4 start-address low-byte
830
30
70
Memory window 4 start-address high-byte
831
31
71
Memory window 4 end-address low-byte
832
32
72
Memory window 4 end-address high-byte
833
33
73
Memory window 4 offset-address low-byte
834
34
74
Memory window 4 offset-address high-byte
835
35
75
I/O window 0 offset-address low-byte
836
36
76
I/O window 0 offset-address high-byte
837
37
77
I/O window 1 offset-address low-byte
838
38
78
I/O window 1 offset-address high-byte
839
39
79
Reserved
83A
3A
7A
Reserved
83B
3B
7B
Reserved
83C
3C
7C
Reserved
83D
3D
7D
Reserved
83E
3E
7E
Reserved
83F
3F
7F
Memory window page register 0
840
−
−
Memory window page register 1
841
−
−
Memory window page register 2
842
−
−
Memory window page register 3
843
−
−
Memory window page register 4
844
−
−
5−4
5.1 ExCA Identification and Revision Register
This register provides host software with information on 16-bit PC Card support and 82365SL-DF compatibility. See
Table 5−2 for a complete description of the register contents.
NOTE: If bit 5 (SUBSYRW) in the system control register is 1, then this register is read-only.
Bit
7
6
5
Type
R
R
RW
RW
Default
1
0
0
0
Name
4
3
2
1
0
RW
RW
RW
RW
0
1
0
0
ExCA identification and revision
Register:
Offset:
ExCA identification and revision
CardBus Socket Address + 800h:
Type:
Default:
Read/Write, Read-only
84h
Card A ExCA Offset 00h
Card B ExCA Offset 40h
Table 5−2. ExCA Identification and Revision Register Description
BIT
SIGNAL
TYPE
FUNCTION
Interface type. These bits, which are hardwired as 10b, identify the 16-bit PC Card support provided by the
PCI6x21/PCI6x11 controller. The PCI6x21/PCI6x11 controller supports both I/O and memory 16-bit PC
Cards.
7−6 ‡
IFTYPE
R
5−4 ‡
RSVD
RW
These bits can be used for 82365SL emulation.
3−0 ‡
365REV
RW
82365SL-DF revision. This field stores the Intel 82365SL-DF revision supported by the PCI6x21/PCI6x11
controller. Host software can read this field to determine compatibility to the 82365SL-DF register set. This
field defaults to 0100b upon reset. Writing 0010b to this field places the controller in the 82356SL mode.
‡ One or more bits in this register are cleared only by the assertion of GRST.
5−5
5.2 ExCA Interface Status Register
This register provides information on current status of the PC Card interface. An X in the default bit values indicates
that the value of the bit after reset depends on the state of the PC Card interface. See Table 5−3 for a complete
description of the register contents.
Bit
7
6
5
Name
4
3
2
1
0
ExCA interface status
Type
R
R
R
R
R
R
R
R
Default
0
0
X
X
X
X
X
X
Register:
Offset:
ExCA interface status
CardBus Socket Address + 801h:
Type:
Default:
Read-only
00XX XXXXb
Card A ExCA Offset 01h
Card B ExCA Offset 41h
Table 5−3. ExCA Interface Status Register Description
BIT
SIGNAL
TYPE
7
RSVD
R
6
CARDPWR
R
5
READY
R
FUNCTION
This bit returns 0 when read. A write has no effect.
CARDPWR. Card power. This bit indicates the current power status of the PC Card socket. This bit reflects
how the ExCA power control register has been programmed. The bit is encoded as:
0 = VCC and VPP to the socket are turned off (default).
1 = VCC and VPP to the socket are turned on.
This bit indicates the current status of the READY signal at the PC Card interface.
4
CARDWP
R
0 = PC Card is not ready for a data transfer.
1 = PC Card is ready for a data transfer.
Card write protect. This bit indicates the current status of the WP signal at the PC Card interface. This signal
reports to the PCI6x21/PCI6x11 controller whether or not the memory card is write protected. Further, write
protection for an entire PCI6x21/PCI6x11 16-bit memory window is available by setting the appropriate bit
in the ExCA memory window offset-address high-byte register.
0 = WP signal is 0. PC Card is R/W.
1 = WP signal is 1. PC Card is read-only.
3
2
CDETECT2
CDETECT1
R
R
Card detect 2. This bit indicates the status of the CD2 signal at the PC Card interface. Software can use
this and CDETECT1 to determine if a PC Card is fully seated in the socket.
0 = CD2 signal is 1. No PC Card inserted.
1 = CD2 signal is 0. PC Card at least partially inserted.
Card detect 1. This bit indicates the status of the CD1 signal at the PC Card interface. Software can use
this and CDETECT2 to determine if a PC Card is fully seated in the socket.
0 = CD1 signal is 1. No PC Card inserted.
1 = CD1 signal is 0. PC Card at least partially inserted.
Battery voltage detect. When a 16-bit memory card is inserted, the field indicates the status of the battery
voltage detect signals (BVD1, BVD2) at the PC Card interface, where bit 0 reflects the BVD1 status, and
bit 1 reflects BVD2.
1−0
BVDSTAT
R
00 = Battery is dead.
01 = Battery is dead.
10 = Battery is low; warning.
11 = Battery is good.
When a 16-bit I/O card is inserted, this field indicates the status of the SPKR (bit 1) signal and the STSCHG
(bit 0) at the PC Card interface. In this case, the two bits in this field directly reflect the current state of these
card outputs.
5−6
5.3 ExCA Power Control Register
This register provides PC Card power control. Bit 7 of this register enables the 16-bit outputs on the socket interface,
and can be used for power management in 16-bit PC Card applications. See Table 5−5 for a complete description
of the register contents.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
ExCA power control
RW
R
R
RW
RW
R
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
ExCA power control
CardBus Socket Address + 802h:
Type:
Default:
Read-only, Read/Write
00h
Card A ExCA Offset 02h
Card B ExCA Offset 42h
Table 5−4. ExCA Power Control Register Description—82365SL Support
BIT
SIGNAL
TYPE
FUNCTION
Card output enable. Bit 7 controls the state of all of the 16-bit outputs on the PCI6x21/PCI6x11 controller.
This bit is encoded as:
0 = 16-bit PC Card outputs disabled (default)
1 = 16-bit PC Card outputs enabled
7
COE
RW
6
RSVD
R
5†
AUTOPWRSWEN
RW
Auto power switch enable.
0 = Automatic socket power switching based on card detects is disabled.
1 = Automatic socket power switching based on card detects is enabled.
PC Card power enable.
0 = VCC = No connection
1 = VCC is enabled and controlled by bit 2 (EXCAPOWER) of the system control register
(PCI offset 80h, see Section 4.29).
4
CAPWREN
RW
3−2
RSVD
R
1−0
EXCAVPP
RW
Reserved. Bit 6 returns 0 when read.
Reserved. Bits 3 and 2 return 0s when read.
PC Card VPP power control. Bits 1 and 0 are used to request changes to card VPP. The PCI6x21/PCI6x11
controller ignores this field unless VCC to the socket is enabled. This field is encoded as:
00 = No connection (default)
10 = 12 V
01 = VCC
11 = Reserved
† One or more bits in this register are cleared only by the assertion of GRST when PME is enabled. If PME is not enabled, then this bit is cleared
by the assertion of PRST or GRST.
Table 5−5. ExCA Power Control Register Description—82365SL-DF Support
BIT
SIGNAL
TYPE
FUNCTION
Card output enable. This bit controls the state of all of the 16-bit outputs on the PCI6x21/PCI6x11 controller.
This bit is encoded as:
0 = 16-bit PC Card outputs are disabled (default).
1 = 16-bit PC Card outputs are enabled.
7†
COE
RW
6−5
RSVD
R
4−3 †
EXCAVCC
RW
2
RSVD
R
1−0 †
EXCAVPP
RW
Reserved. These bits return 0s when read. Writes have no effect.
VCC. These bits are used to request changes to card VCC. This field is encoded as:
00 = 0 V (default)
10 = 5 V
01 = 0 V reserved
11 = 3.3 V
This bit returns 0 when read. A write has no effect.
VPP. These bits are used to request changes to card VPP. The PCI6x21/PCI6x11 controller ignores this
field unless VCC to the socket is enabled (i.e., 5 Vdc or 3.3 Vdc). This field is encoded as:
00 = 0 V (default)
10 = 12 V
01 = VCC
11 = 0 V reserved
† This bit is cleared only by the assertion of GRST when PME is enabled. If PME is not enabled, then this bit is cleared by the assertion of PRST
or GRST.
5−7
5.4 ExCA Interrupt and General Control Register
This register controls interrupt routing for I/O interrupts as well as other critical 16-bit PC Card functions. See
Table 5−6 for a complete description of the register contents.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
ExCA interrupt and general control
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
ExCA interrupt and general control
CardBus Socket Address + 803h:
Type:
Default:
Read/Write
00h
Card A ExCA Offset 03h
Card B ExCA Offset 43h
Table 5−6. ExCA Interrupt and General Control Register Description
BIT
SIGNAL
TYPE
FUNCTION
7
RINGEN
RW
Card ring indicate enable. Enables the ring indicate function of the BVD1/RI terminals. This bit is encoded
as:
0 = Ring indicate disabled (default)
1 = Ring indicate enabled
Card reset. This bit controls the 16-bit PC Card RESET signal, and allows host software to force a card
reset. This bit affects 16-bit cards only. This bit is encoded as:
0 = RESET signal asserted (default)
1 = RESET signal deasserted.
6†
RESET
RW
5†
CARDTYPE
RW
Card type. This bit indicates the PC Card type. This bit is encoded as:
4
CSCROUTE
RW
0 = Memory PC Card is installed (default)
1 = I/O PC Card is installed
PCI interrupt − CSC routing enable bit. This bit has meaning only if the CSC interrupt routing control bit
(PCI offset 93h, bit 5) is 0. In this case, when this bit is set (high), the card status change interrupts are
routed to PCI interrupts. When low, the card status change interrupts are routed using bits 7−4 in the ExCA
card status-change interrupt configuration register (ExCA offset 805h, see Section 5.6). This bit is encoded
as:
0 = CSC interrupts routed by ExCA registers (default)
1 = CSC interrupts routed to PCI interrupts
If the CSC interrupt routing control bit (bit 5) of the diagnostic register (PCI offset 93h, see Section 4.40)
is set to 1, this bit has no meaning, which is the default case.
Card interrupt select for I/O PC Card functional interrupts. These bits select the interrupt routing for I/O
PC Card functional interrupts. This field is encoded as:
3−0
INTSELECT
RW
0000 = No IRQ selected (default). CSC interrupts are routed to PCI Interrupts. This bit setting is ORed
with bit 4 (CSCROUTE) for backward compatibility.
0001 = IRQ1 enabled
0010 = SMI enabled
0011 = IRQ3 enabled
0100 = IRQ4 enabled
0101 = IRQ5 enabled
0110 = IRQ6 enabled
0111 = IRQ7 enabled
1000 = IRQ8 enabled
1001 = IRQ9 enabled
1010 = IRQ10 enabled
1011 = IRQ11 enabled
1100 = IRQ12 enabled
1101 = IRQ13 enabled
1110 = IRQ14 enabled
1111 = IRQ15 enabled
† This bit is cleared only by the assertion of GRST when PME is enabled. If PME is not enabled, then this bit is cleared by the assertion of PRST
or GRST.
5−8
5.5 ExCA Card Status-Change Register
The ExCA card status-change register controls interrupt routing for I/O interrupts as well as other critical 16-bit PC
Card functions. The register enables these interrupt sources to generate an interrupt to the host. When the interrupt
source is disabled, the corresponding bit in this register always reads 0. When an interrupt source is enabled, the
corresponding bit in this register is set to indicate that the interrupt source is active. After generating the interrupt to
the host, the interrupt service routine must read this register to determine the source of the interrupt. The interrupt
service routine is responsible for resetting the bits in this register as well. Resetting a bit is accomplished by one of
two methods: a read of this register or an explicit writeback of 1 to the status bit. The choice of these two methods
is based on bit 2 (interrupt flag clear mode select) in the ExCA global control register (CB offset 81Eh, see
Section 5.20). See Table 5−7 for a complete description of the register contents.
Bit
7
6
5
Type
R
R
R
R
Default
0
0
0
0
Name
4
3
2
1
0
R
R
R
R
0
0
0
0
ExCA card status-change
Register:
Type:
Offset:
Default:
ExCA card status-change
Read-only
CardBus socket address + 804h; Card A ExCA offset 04h
Card B ExCA offset 44h
00h
Table 5−7. ExCA Card Status-Change Register Description
BIT
SIGNAL
TYPE
7−4
RSVD
R
Reserved. Bits 7−4 return 0s when read.
R
Card detect change. Bit 3 indicates whether a change on CD1 or CD2 occurred at the PC Card
interface. This bit is encoded as:
0 = No change detected on either CD1 or CD2
1 = Change detected on either CD1 or CD2
3†
2†
CDCHANGE
READYCHANGE
R
FUNCTION
Ready change. When a 16-bit memory is installed in the socket, bit 2 includes whether the source of
a PCI6x21/PCI6x11 interrupt was due to a change on READY at the PC Card interface, indicating that
the PC Card is now ready to accept new data. This bit is encoded as:
0 = No low-to-high transition detected on READY (default)
1 = Detected low-to-high transition on READY
When a 16-bit I/O card is installed, bit 2 is always 0.
1†
BATWARN
R
Battery warning change. When a 16-bit memory card is installed in the socket, bit 1 indicates whether
the source of a PCI6x21/PCI6x11 interrupt was due to a battery-low warning condition. This bit is
encoded as:
0 = No battery warning condition (default)
1 = Detected battery warning condition
When a 16-bit I/O card is installed, bit 1 is always 0.
0†
BATDEAD
R
Battery dead or status change. When a 16-bit memory card is installed in the socket, bit 0 indicates
whether the source of a PCI6x21/PCI6x11 interrupt was due to a battery dead condition. This bit is
encoded as:
0 = STSCHG deasserted (default)
1 = STSCHG asserted
Ring indicate. When the PCI6x21/PCI6x11 is configured for ring indicate operation, bit 0 indicates the
status of RI.
† These are PME context bits and can be cleared only by the assertion of GRST when PME is enabled. If PME is not enabled, then these bits are
cleared by the assertion of PRST or GRST.
5−9
5.6 ExCA Card Status-Change Interrupt Configuration Register
This register controls interrupt routing for CSC interrupts, as well as masks/unmasks CSC interrupt sources. See
Table 5−8 for a complete description of the register contents.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
ExCA card status-change interrupt configuration
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
ExCA card status-change interrupt configuration
CardBus Socket Address + 805h:
Card A ExCA Offset 05h
Card B ExCA Offset 45h
Read/Write
00h
Table 5−8. ExCA Card Status-Change Interrupt Configuration Register Description
BIT
SIGNAL
TYPE
FUNCTION
Interrupt select for card status change. These bits select the interrupt routing for card status-change
interrupts. This field is encoded as:
7−4
CSCSELECT
RW
3†
CDEN
RW
0000 = CSC interrupts routed to PCI interrupts if bit 5 of the diagnostic register (PCI offset 93h) is set
to 1b. In this case bit 4 of ExCA 803 is a don’t care. This is the default setting.
0000 = No ISA interrupt routing if bit 5 of the diagnostic register (PCI offset 93h) is set to 0b. In this case,
CSC interrupts are routed to PCI interrupts by setting bit 4 of ExCA 803h to 1b.
0001 = IRQ1 enabled
0010 = SMI enabled
0011 = IRQ3 enabled
0100 = IRQ4 enabled
0101 = IRQ5 enabled
0110 = IRQ6 enabled
0111 = IRQ7 enabled
1000 = IRQ8 enabled
1001 = IRQ9 enabled
1010 = IRQ10 enabled
1011 = IRQ11 enabled
1100 = IRQ12 enabled
1101 = IRQ13 enabled
1110 = IRQ14 enabled
1111 = IRQ15 enabled
Card detect enable. Enables interrupts on CD1 or CD2 changes. This bit is encoded as:
2†
1†
0†
READYEN
BATWARNEN
BATDEADEN
RW
RW
RW
0 = Disables interrupts on CD1 or CD2 line changes (default)
1 = Enables interrupts on CD1 or CD2 line changes
Ready enable. This bit enables/disables a low-to-high transition on the PC Card READY signal to generate
a host interrupt. This interrupt source is considered a card status change. This bit is encoded as:
0 = Disables host interrupt generation (default)
1 = Enables host interrupt generation
Battery warning enable. This bit enables/disables a battery warning condition to generate a CSC interrupt.
This bit is encoded as:
0 = Disables host interrupt generation (default)
1 = Enables host interrupt generation
Battery dead enable. This bit enables/disables a battery dead condition on a memory PC Card or assertion
of the STSCHG I/O PC Card signal to generate a CSC interrupt.
0 = Disables host interrupt generation (default)
1 = Enables host interrupt generation
† This bit is cleared only by the assertion of GRST when PME is enabled. If PME is not enabled, then this bit is cleared by the assertion of PRST
or GRST.
5−10
5.7 ExCA Address Window Enable Register
The ExCA address window enable register enables/disables the memory and I/O windows to the 16-bit PC Card. By
default, all windows to the card are disabled. The PCI6x21/PCI6x11 controller does not acknowledge PCI memory
or I/O cycles to the card if the corresponding enable bit in this register is 0, regardless of the programming of the
memory or I/O window start/end/offset address registers. See Table 5−9 for a complete description of the register
contents.
Bit
7
6
5
RW
RW
R
RW
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
RW
0
0
0
0
ExCA address window enable
Register:
Type:
Offset:
Default:
ExCA address window enable
Read-only, Read/Write
CardBus socket address + 806h; Card A ExCA offset 06h
Card B ExCA offset 46h
00h
Table 5−9. ExCA Address Window Enable Register Description
BIT
SIGNAL
TYPE
FUNCTION
7
IOWIN1EN
RW
I/O window 1 enable. Bit 7 enables/disables I/O window 1 for the PC Card. This bit is encoded as:
0 = I/O window 1 disabled (default)
1 = I/O window 1 enabled
6
IOWIN0EN
RW
I/O window 0 enable. Bit 6 enables/disables I/O window 0 for the PC Card. This bit is encoded as:
0 = I/O window 0 disabled (default)
1 = I/O window 0 enabled
5
RSVD
R
4
3
2
MEMWIN4EN
MEMWIN3EN
MEMWIN2EN
Reserved. Bit 5 returns 0 when read.
RW
Memory window 4 enable. Bit 4 enables/disables memory window 4 for the PC Card. This bit is
encoded as:
0 = Memory window 4 disabled (default)
1 = Memory window 4 enabled
RW
Memory window 3 enable. Bit 3 enables/disables memory window 3 for the PC Card. This bit is
encoded as:
0 = Memory window 3 disabled (default)
1 = Memory window 3 enabled
RW
Memory window 2 enable. Bit 2 enables/disables memory window 2 for the PC Card. This bit is
encoded as:
0 = Memory window 2 disabled (default)
1 = Memory window 2 enabled
1
MEMWIN1EN
RW
Memory window 1 enable. Bit 1 enables/disables memory window 1 for the PC Card. This bit is
encoded as:
0 = Memory window 1 disabled (default)
1 = Memory window 1 enabled
0
MEMWIN0EN
RW
Memory window 0 enable. Bit 0 enables/disables memory window 0 for the PC Card. This bit is
encoded as:
0 = Memory window 0 disabled (default)
1 = Memory window 0 enabled
5−11
5.8 ExCA I/O Window Control Register
The ExCA I/O window control register contains parameters related to I/O window sizing and cycle timing. See
Table 5−10 for a complete description of the register contents.
Bit
7
6
5
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
RW
0
0
0
0
ExCA I/O window control
Register:
Type:
Offset:
Default:
ExCA I/O window control
Read/Write
CardBus socket address + 807h: Card A ExCA offset 07h
Card B ExCA offset 47h
00h
Table 5−10. ExCA I/O Window Control Register Description
BIT
7
6
5
4
3
2
1
0
5−12
SIGNAL
WAITSTATE1
ZEROWS1
IOSIS16W1
DATASIZE1
WAITSTATE0
ZEROWS0
IOSIS16W0
DATASIZE0
TYPE
FUNCTION
RW
I/O window 1 wait state. Bit 7 controls the I/O window 1 wait state for 16-bit I/O accesses. Bit 7 has no effect
on 8-bit accesses. This wait-state timing emulates the ISA wait state used by the Intel 82365SL-DF. This
bit is encoded as:
0 = 16-bit cycles have standard length (default).
1 = 16-bit cycles are extended by one equivalent ISA wait state.
RW
I/O window 1 zero wait state. Bit 6 controls the I/O window 1 wait state for 8-bit I/O accesses. Bit 6 has
no effect on 16-bit accesses. This wait-state timing emulates the ISA wait state used by the Intel
82365SL-DF. This bit is encoded as:
0 = 8-bit cycles have standard length (default).
1 = 8-bit cycles are reduced to equivalent of three ISA cycles.
RW
I/O window 1 IOIS16 source. Bit 5 controls the I/O window 1 automatic data-sizing feature that uses IOIS16
from the PC Card to determine the data width of the I/O data transfer. This bit is encoded as:
0 = Window data width determined by DATASIZE1, bit 4 (default).
1 = Window data width determined by IOIS16.
RW
I/O window 1 data size. Bit 4 controls the I/O window 1 data size. Bit 4 is ignored if bit 5 (IOSIS16W1) is
set. This bit is encoded as:
0 = Window data width is 8 bits (default).
1 = Window data width is 16 bits.
RW
I/O window 0 wait state. Bit 3 controls the I/O window 0 wait state for 16-bit I/O accesses. Bit 3 has no effect
on 8-bit accesses. This wait-state timing emulates the ISA wait state used by the Intel 82365SL-DF. This
bit is encoded as:
0 = 16-bit cycles have standard length (default).
1 = 16-bit cycles are extended by one equivalent ISA wait state.
RW
I/O window 0 zero wait state. Bit 2 controls the I/O window 0 wait state for 8-bit I/O accesses. Bit 2 has
no effect on 16-bit accesses. This wait-state timing emulates the ISA wait state used by the Intel
82365SL-DF. This bit is encoded as:
0 = 8-bit cycles have standard length (default).
1 = 8-bit cycles are reduced to equivalent of three ISA cycles.
RW
I/O window 0 IOIS16 source. Bit 1 controls the I/O window 0 automatic data sizing feature that uses IOIS16
from the PC Card to determine the data width of the I/O data transfer. This bit is encoded as:
0 = Window data width is determined by DATASIZE0, bit 0 (default).
1 = Window data width is determined by IOIS16.
RW
I/O window 0 data size. Bit 0 controls the I/O window 0 data size. Bit 0 is ignored if bit 1 (IOSIS16W0) is
set. This bit is encoded as:
0 = Window data width is 8 bits (default).
1 = Window data width is 16 bits.
5.9 ExCA I/O Windows 0 and 1 Start-Address Low-Byte Registers
These registers contain the low byte of the 16-bit I/O window start address for I/O windows 0 and 1. The 8 bits of these
registers correspond to the lower 8 bits of the start address.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
ExCA I/O windows 0 and 1 start-address low-byte
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA I/O window 0 start-address low-byte
CardBus Socket Address + 808h:
Card A ExCA Offset 08h
Card B ExCA Offset 48h
ExCA I/O window 1 start-address low-byte
CardBus Socket Address + 80Ch:
Card A ExCA Offset 0Ch
Card B ExCA Offset 4Ch
Read/Write
00h
5.10 ExCA I/O Windows 0 and 1 Start-Address High-Byte Registers
These registers contain the high byte of the 16-bit I/O window start address for I/O windows 0 and 1. The 8 bits of
these registers correspond to the upper 8 bits of the start address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA I/O windows 0 and 1 start-address high-byte
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA I/O window 0 start-address high-byte
CardBus Socket Address + 809h:
Card A ExCA Offset 09h
Card B ExCA Offset 49h
ExCA I/O window 1 start-address high-byte
CardBus Socket Address + 80Dh:
Card A ExCA Offset 0Dh
Card B ExCA Offset 4Dh
Read/Write
00h
5−13
5.11 ExCA I/O Windows 0 and 1 End-Address Low-Byte Registers
These registers contain the low byte of the 16-bit I/O window end address for I/O windows 0 and 1. The 8 bits of these
registers correspond to the lower 8 bits of the start address.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
ExCA I/O windows 0 and 1 end-address low-byte
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA I/O window 0 end-address low-byte
CardBus Socket Address + 80Ah:
Card A ExCA Offset 0Ah
Card B ExCA Offset 4Ah
ExCA I/O window 1 end-address low-byte
CardBus Socket Address + 80Eh:
Card A ExCA Offset 0Eh
Card B ExCA Offset 4Eh
Read/Write
00h
5.12 ExCA I/O Windows 0 and 1 End-Address High-Byte Registers
These registers contain the high byte of the 16-bit I/O window end address for I/O windows 0 and 1. The 8 bits of these
registers correspond to the upper 8 bits of the end address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
3
2
1
0
RW
RW
RW
0
0
0
ExCA I/O windows 0 and 1 end-address high-byte
Register:
Offset:
Register:
Offset:
Type:
Default:
5−14
4
ExCA I/O window 0 end-address high-byte
CardBus Socket Address + 80Bh:
Card A ExCA Offset 0Bh
Card B ExCA Offset 4Bh
ExCA I/O window 1 end-address high-byte
CardBus Socket Address + 80Fh:
Card A ExCA Offset 0Fh
Card B ExCA Offset 4Fh
Read/Write
00h
5.13 ExCA Memory Windows 0−4 Start-Address Low-Byte Registers
These registers contain the low byte of the 16-bit memory window start address for memory windows 0, 1, 2, 3, and 4.
The 8 bits of these registers correspond to bits A19−A12 of the start address.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
ExCA memory windows 0−4 start-address low-byte
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 start-address low-byte
CardBus Socket Address + 810h:
Card A ExCA Offset 10h
Card B ExCA Offset 50h
ExCA memory window 1 start-address low-byte
CardBus Socket Address + 818h:
Card A ExCA Offset 18h
Card B ExCA Offset 58h
ExCA memory window 2 start-address low-byte
CardBus Socket Address + 820h:
Card A ExCA Offset 20h
Card B ExCA Offset 60h
ExCA memory window 3 start-address low-byte
CardBus Socket Address + 828h:
Card A ExCA Offset 28h
Card B ExCA Offset 68h
ExCA memory window 4 start-address low-byte
CardBus Socket Address + 830h:
Card A ExCA Offset 30h
Card B ExCA Offset 70h
Read/Write
00h
5−15
5.14 ExCA Memory Windows 0−4 Start-Address High-Byte Registers
These registers contain the high nibble of the 16-bit memory window start address for memory windows 0, 1, 2, 3,
and 4. The lower 4 bits of these registers correspond to bits A23−A20 of the start address. In addition, the memory
window data width and wait states are set in this register. See Table 5−11 for a complete description of the register
contents.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
ExCA memory windows 0−4 start-address high-byte
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 start-address high-byte
CardBus Socket Address + 811h:
Card A ExCA Offset 11h
Card B ExCA Offset 51h
ExCA memory window 1 start-address high-byte
CardBus Socket Address + 819h:
Card A ExCA Offset 19h
Card B ExCA Offset 59h
ExCA memory window 2 start-address high-byte
CardBus Socket Address + 821h:
Card A ExCA Offset 21h
Card B ExCA Offset 61h
ExCA memory window 3 start-address high-byte
CardBus Socket Address + 829h:
Card A ExCA Offset 29h
Card B ExCA Offset 69h
ExCA memory window 4 start-address high-byte
CardBus Socket Address + 831h:
Card A ExCA Offset 31h
Card B ExCA Offset 71h
Read/Write
00h
Table 5−11. ExCA Memory Windows 0−4 Start-Address High-Byte Registers Description
BIT
SIGNAL
TYPE
7
DATASIZE
RW
FUNCTION
This bit controls the memory window data width. This bit is encoded as:
0 = Window data width is 8 bits (default)
1 = Window data width is 16 bits
Zero wait-state. This bit controls the memory window wait state for 8- and 16-bit accesses. This wait-state
timing emulates the ISA wait state used by the 82365SL-DF. This bit is encoded as:
5−16
6
ZEROWAIT
RW
5−4
SCRATCH
RW
Scratch pad bits. These bits have no effect on memory window operation.
3−0
STAHN
RW
Start address high-nibble. These bits represent the upper address bits A23−A20 of the memory window
start address.
0 = 8- and 16-bit cycles have standard length (default).
1 = 8-bit cycles reduced to equivalent of three ISA cycles
16-bit cycles reduced to the equivalent of two ISA cycles
5.15 ExCA Memory Windows 0−4 End-Address Low-Byte Registers
These registers contain the low byte of the 16-bit memory window end address for memory windows 0, 1, 2, 3, and 4.
The 8 bits of these registers correspond to bits A19−A12 of the end address.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
ExCA memory windows 0−4 end-address low-byte
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 end-address low-byte
CardBus Socket Address + 812h:
Card A ExCA Offset 12h
Card B ExCA Offset 52h
ExCA memory window 1 end-address low-byte
CardBus Socket Address + 81Ah:
Card A ExCA Offset 1Ah
Card B ExCA Offset 5Ah
ExCA memory window 2 end-address low-byte
CardBus Socket Address + 822h:
Card A ExCA Offset 22h
Card B ExCA Offset 62h
ExCA memory window 3 end-address low-byte
CardBus Socket Address + 82Ah:
Card A ExCA Offset 2Ah
Card B ExCA Offset 6Ah
ExCA memory window 4 end-address low-byte
CardBus Socket Address + 832h:
Card A ExCA Offset 32h
Card B ExCA Offset 72h
Read/Write
00h
5−17
5.16 ExCA Memory Windows 0−4 End-Address High-Byte Registers
These registers contain the high nibble of the 16-bit memory window end address for memory windows 0, 1, 2, 3,
and 4. The lower 4 bits of these registers correspond to bits A23−A20 of the end address. In addition, the memory
window wait states are set in this register. See Table 5−12 for a complete description of the register contents.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
ExCA memory windows 0−4 end-address high-byte
RW
RW
R
R
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 end-address high-byte
CardBus Socket Address + 813h:
Card A ExCA Offset 13h
Card B ExCA Offset 53h
ExCA memory window 1 end-address high-byte
CardBus Socket Address + 81Bh:
Card A ExCA Offset 1Bh
Card B ExCA Offset 5Bh
ExCA memory window 2 end-address high-byte
CardBus Socket Address + 823h:
Card A ExCA Offset 23h
Card B ExCA Offset 63h
ExCA memory window 3 end-address high-byte
CardBus Socket Address + 82Bh:
Card A ExCA Offset 2Bh
Card B ExCA Offset 6Bh
ExCA Memory window 4 end-address high-byte
CardBus Socket Address + 833h:
Card A ExCA Offset 33h
Card B ExCA Offset 73h
Read/Write, Read-only
00h
Table 5−12. ExCA Memory Windows 0−4 End-Address High-Byte Registers Description
5−18
BIT
SIGNAL
TYPE
FUNCTION
7−6
MEMWS
RW
Wait state. These bits specify the number of equivalent ISA wait states to be added to 16-bit memory
accesses. The number of wait states added is equal to the binary value of these 2 bits.
5−4
RSVD
R
3−0
ENDHN
RW
Reserved. These bits return 0s when read. Writes have no effect.
End-address high nibble. These bits represent the upper address bits A23−A20 of the memory window end
address.
5.17 ExCA Memory Windows 0−4 Offset-Address Low-Byte Registers
These registers contain the low byte of the 16-bit memory window offset address for memory windows 0, 1, 2, 3,
and 4. The 8 bits of these registers correspond to bits A19−A12 of the offset address.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
ExCA memory windows 0−4 offset-address low-byte
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 offset-address low-byte
CardBus Socket Address + 814h:
Card A ExCA Offset 14h
Card B ExCA Offset 54h
ExCA memory window 1 offset-address low-byte
CardBus Socket Address + 81Ch:
Card A ExCA Offset 1Ch
Card B ExCA Offset 5Ch
ExCA memory window 2 offset-address low-byte
CardBus Socket Address + 824h:
Card A ExCA Offset 24h
Card B ExCA Offset 64h
ExCA memory window 3 offset-address low-byte
CardBus Socket Address + 82Ch:
Card A ExCA Offset 2Ch
Card B ExCA Offset 6Ch
ExCA memory window 4 offset-address low-byte
CardBus Socket Address + 834h:
Card A ExCA Offset 34h
Card B ExCA Offset 74h
Read/Write
00h
5−19
5.18 ExCA Memory Windows 0−4 Offset-Address High-Byte Registers
These registers contain the high 6 bits of the 16-bit memory window offset address for memory windows 0, 1, 2, 3,
and 4. The lower 6 bits of these registers correspond to bits A25−A20 of the offset address. In addition, the write
protection and common/attribute memory configurations are set in this register. See Table 5−13 for a complete
description of the register contents.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
ExCA memory window 0−4 offset-address high-byte
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 offset-address high-byte
CardBus Socket Address + 815h:
Card A ExCA Offset 15h
Card B ExCA Offset 55h
ExCA memory window 1 offset-address high-byte
CardBus Socket Address + 81Dh:
Card A ExCA Offset 1Dh
Card B ExCA Offset 5Dh
ExCA memory window 2 offset-address high-byte
CardBus Socket Address + 825h:
Card A ExCA Offset 25h
Card B ExCA Offset 65h
ExCA memory window 3 offset-address high-byte
CardBus Socket Address + 82Dh:
Card A ExCA Offset 2Dh
Card B ExCA Offset 6Dh
ExCA memory window 4 offset-address high-byte
CardBus Socket Address + 835h:
Card A ExCA Offset 35h
Card B ExCA Offset 75h
Read/Write
00h
Table 5−13. ExCA Memory Windows 0−4 Offset-Address High-Byte Registers Description
BIT
7
5−20
SIGNAL
WINWP
TYPE
RW
6
REG
RW
5−0
OFFHB
RW
FUNCTION
Write protect. This bit specifies whether write operations to this memory window are enabled.
This bit is encoded as:
0 = Write operations are allowed (default).
1 = Write operations are not allowed.
This bit specifies whether this memory window is mapped to card attribute or common memory.
This bit is encoded as:
0 = Memory window is mapped to common memory (default).
1 = Memory window is mapped to attribute memory.
Offset-address high byte. These bits represent the upper address bits A25−A20 of the memory window offset
address.
5.19 ExCA Card Detect and General Control Register
This register controls how the ExCA registers for the socket respond to card removal. It also reports the status of the
VS1 and VS2 signals at the PC Card interface. Table 5−14 describes each bit in the ExCA card detect and general
control register.
Bit
7
6
5
Name
4
3
2
1
0
ExCA card detect and general control
Type
R
R
W
RW
R
R
RW
R
Default
X
X
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
ExCA card detect and general control
CardBus Socket Address + 816h:
Card A ExCA Offset 16h
Card B ExCA Offset 56h
Read-only, Write-only, Read/Write
XX00 0000b
Table 5−14. ExCA Card Detect and General Control Register Description
BIT
7†
6†
SIGNAL
VS2STAT
VS1STAT
TYPE
R
R
FUNCTION
VS2. This bit reports the current state of the VS2 signal at the PC Card interface, and, therefore, does not
have a default value.
0 = VS2 is low.
1 = VS2 is high.
VS1. This bit reports the current state of the VS1 signal at the PC Card interface, and, therefore, does not
have a default value.
0 = VS1 is low.
1 = VS1 is high.
Software card detect interrupt. If card detect enable, bit 3 in the ExCA card status change interrupt
configuration register (ExCA offset 805h, see Section 5.6) is set, then writing a 1 to this bit causes a
card-detect card-status-change interrupt for the associated card socket.
5
SWCSC
W
If the card-detect enable bit is cleared to 0 in the ExCA card status-change interrupt configuration register
(ExCA offset 805h, see Section 5.6), then writing a 1 to the software card-detect interrupt bit has no effect.
This bit is write-only.
A read operation of this bit always returns 0. Writing a 1 to this bit also clears it. If bit 2 of the ExCA global
control register (ExCA offset 81Eh, see Section 5.20) is set and a 1 is written to clear bit 3 of the ExCA
card status change interrupt register, then this bit also is cleared.
4
CDRESUME
RW
Card detect resume enable. If this bit is set to 1 and a card detect change has been detected on the CD1
and CD2 inputs, then the RI_OUT output goes from high to low. The RI_OUT remains low until the card
status change bit in the ExCA card status-change register (ExCA offset 804h, see Section 5.5) is cleared.
If this bit is a 0, then the card detect resume functionality is disabled.
0 = Card detect resume disabled (default)
1 = Card detect resume enabled
3−2
RSVD
R
1
REGCONFIG
RW
0
RSVD
R
These bits return 0s when read. Writes have no effect.
Register configuration upon card removal. This bit controls how the ExCA registers for the socket react
to a card removal event. This bit is encoded as:
0 = No change to ExCA registers upon card removal (default)
1 = Reset ExCA registers upon card removal
This bit returns 0 when read. A write has no effect.
† One or more bits in this register are cleared only by the assertion of GRST when PME is enabled. If PME is not enabled, then this bit is cleared
by the assertion of PRST or GRST.
5−21
5.20 ExCA Global Control Register
This register controls both PC Card sockets, and is not duplicated for each socket. The host interrupt mode bits in
this register are retained for 82365SL-DF compatibility. See Table 5−15 for a complete description of the register
contents.
Bit
7
6
5
Name
4
3
2
1
0
ExCA global control
Type
R
R
R
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
Register:
Offset:
ExCA global control
CardBus Socket Address + 81Eh:
Type:
Default:
Read-only, Read/Write
00h
Card A ExCA Offset 1Eh
Card B ExCA Offset 5Eh
Table 5−15. ExCA Global Control Register Description
BIT
SIGNAL
TYPE
7−5
RSVD
R
4
3
2‡
1‡
0‡
INTMODEB
INTMODEA
IFCMODE
CSCMODE
PWRDWN
RW
RW
RW
RW
RW
FUNCTION
These bits return 0s when read. Writes have no effect.
Level/edge interrupt mode select, card B. This bit selects the signaling mode for the PCI6x21/PCI6x11 host
interrupt for card B interrupts. This bit is encoded as:
0 = Host interrupt is edge mode (default).
1 = Host interrupt is level mode.
Level/edge interrupt mode select, card A. This bit selects the signaling mode for the PCI6x21/PCI6x11 host
interrupt for card A interrupts. This bit is encoded as:
0 = Host interrupt is edge-mode (default).
1 = Host interrupt is level-mode.
Interrupt flag clear mode select. This bit selects the interrupt flag clear mechanism for the flags in the ExCA
card status change register. This bit is encoded as:
0 = Interrupt flags cleared by read of CSC register (default)
1 = Interrupt flags cleared by explicit writeback of 1
Card status change level/edge mode select. This bit selects the signaling mode for the
PCI6x21/PCI6x11 host interrupt for card status changes. This bit is encoded as:
0 = Host interrupt is edge-mode (default).
1 = Host interrupt is level-mode.
Power-down mode select. When this bit is set to 1, the PCI6x21/PCI6x11 controller is in power-down
mode. In power-down mode the PCI6x21/PCI6x11 card outputs are placed in a high-impedance state until
an active cycle is executed on the card interface. Following an active cycle the outputs are again placed
in a high-impedance state. The PCI6x21/PCI6x11 controller still receives functional interrupts and/or card
status change interrupts; however, an actual card access is required to wake up the interface. This bit is
encoded as:
0 = Power-down mode disabled (default)
1 = Power-down mode enabled
‡ One or more bits in this register are cleared only by the assertion of GRST.
5−22
5.21 ExCA I/O Windows 0 and 1 Offset-Address Low-Byte Registers
These registers contain the low byte of the 16-bit I/O window offset address for I/O windows 0 and 1. The 8 bits of
these registers correspond to the lower 8 bits of the offset address, and bit 0 is always 0.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
ExCA I/O windows 0 and 1 offset-address low-byte
RW
RW
RW
RW
RW
RW
RW
R
0
0
0
0
0
0
0
0
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA I/O window 0 offset-address low-byte
CardBus Socket Address + 836h:
Card A ExCA Offset 36h
Card B ExCA Offset 76h
ExCA I/O window 1 offset-address low-byte
CardBus Socket Address + 838h:
Card A ExCA Offset 38h
Card B ExCA Offset 78h
Read/Write, Read-only
00h
5.22 ExCA I/O Windows 0 and 1 Offset-Address High-Byte Registers
These registers contain the high byte of the 16-bit I/O window offset address for I/O windows 0 and 1. The 8 bits of
these registers correspond to the upper 8 bits of the offset address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA I/O windows 0 and 1 offset-address high-byte
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA I/O window 0 offset-address high-byte
CardBus Socket Address + 837h:
Card A ExCA Offset 37h
Card B ExCA Offset 77h
ExCA I/O window 1 offset-address high-byte
CardBus Socket Address + 839h:
Card A ExCA Offset 39h
Card B ExCA Offset 79h
Read/Write
00h
5−23
5.23 ExCA Memory Windows 0−4 Page Registers
The upper 8 bits of a 4-byte PCI memory address are compared to the contents of this register when decoding
addresses for 16-bit memory windows. Each window has its own page register, all of which default to 00h. By
programming this register to a nonzero value, host software can locate 16-bit memory windows in any one of 256
16-Mbyte regions in the 4-gigabyte PCI address space. These registers are only accessible when the ExCA registers
are memory-mapped, that is, these registers may not be accessed using the index/data I/O scheme.
Bit
7
6
5
Name
Type
Default
3
2
1
0
RW
RW
RW
RW
RW
RW
RW
R
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
5−24
4
ExCA memory windows 0−4 page
ExCA memory windows 0−4 page
CardBus Socket Address + 840h, 841h, 842h, 843h, 844h
Read/Write
00h
6 CardBus Socket Registers (Functions 0 and 1)
The 1997 PC Card Standard requires a CardBus socket controller to provide five 32-bit registers that report and
control socket-specific functions. The PCI6x21/PCI6x11 controller provides the CardBus socket/ExCA base address
register (PCI offset 10h, see Section 4.12) to locate these CardBus socket registers in PCI memory address space.
Each function has a separate base address register for accessing the CardBus socket registers (see Figure 6−1).
Table 6−1 gives the location of the socket registers in relation to the CardBus socket/ExCA base address.
In addition to the five required registers, the PCI6x21/PCI6x11 controller implements a register at offset 20h that
provides power management control for the socket.
PCI6x21/PCI6x11 Configuration Registers
Offset
Host
Memory Space
Offset
Host
Memory Space
Offset
00h
CardBus Socket/ExCA Base Address
10h
CardBus
Socket A
Registers
20h
00h
16-Bit Legacy-Mode Base Address
44h
ExCA
Registers
Card A
800h
CardBus
Socket B
Registers
20h
844h
800h
ExCA
Registers
Card B
Note: The CardBus socket/ExCA base
address mode register is separate for
functions 0 and 1.
844h
Offsets are from the CardBus socket/ExCA base
address register’s base address.
Figure 6−1. Accessing CardBus Socket Registers Through PCI Memory
Table 6−1. CardBus Socket Registers
REGISTER NAME
OFFSET
Socket event †
00h
Socket mask †
04h
Socket present state †
08h
Socket force event
0Ch
Socket control †
Reserved
10h
14h−1Ch
Socket power management ‡
20h
† One or more bits in the register are PME context bits and can be cleared only by the assertion of GRST when PME is enabled. If PME is not
enabled, then these bits are cleared by the assertion of PRST or GRST.
‡ One or more bits in this register are cleared only by the assertion of GRST.
6−1
6.1 Socket Event Register
This register indicates a change in socket status has occurred. These bits do not indicate what the change is, only
that one has occurred. Software must read the socket present state register for current status. Each bit in this register
can be cleared by writing a 1 to that bit. The bits in this register can be set to a 1 by software through writing a 1 to
the corresponding bit in the socket force event register. All bits in this register are cleared by PCI reset. They can be
immediately set again, if, when coming out of PC Card reset, the bridge finds the status unchanged (i.e., CSTSCHG
reasserted or card detect is still true). Software needs to clear this register before enabling interrupts. If it is not cleared
and interrupts are enabled, then an unmasked interrupt is generated based on any bit that is set. See Table 6−2 for
a complete description of the register contents.
Bit
31
30
29
28
27
26
25
Name
24
23
22
21
20
19
18
17
16
Socket event
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Socket event
Type
R
R
R
R
R
R
R
R
R
R
R
R
RWC
RWC
RWC
RWC
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Socket event
CardBus Socket Address + 00h
Read-only, Read/Write to Clear
0000 0000h
Table 6−2. Socket Event Register Description
BIT
SIGNAL
TYPE
31−4
RSVD
R
3†
PWREVENT
RWC
Power cycle. This bit is set when the PCI6x21/PCI6x11 controller detects that the PWRCYCLE bit in the
socket present state register (offset 08h, see Section 6.3) has changed. This bit is cleared by writing a 1.
2†
CD2EVENT
RWC
CCD2. This bit is set when the PCI6x21/PCI6x11 controller detects that the CDETECT2 field in the socket
present state register (offset 08h, see Section 6.3) has changed. This bit is cleared by writing a 1.
1†
CD1EVENT
RWC
CCD1. This bit is set when the PCI6x21/PCI6x11 controller detects that the CDETECT1 field in the socket
present state register (offset 08h, see Section 6.3) has changed. This bit is cleared by writing a 1.
RWC
CSTSCHG. This bit is set when the CARDSTS field in the socket present state register (offset 08h, see
Section 6.3) has changed state. For CardBus cards, this bit is set on the rising edge of the CSTSCHG
signal. For 16-bit PC Cards, this bit is set on both transitions of the CSTSCHG signal. This bit is reset by
writing a 1.
0†
CSTSEVENT
FUNCTION
These bits return 0s when read.
† This bit is cleared only by the assertion of GRST when PME is enabled. If PME is not enabled, then this bit is cleared by the assertion of PRST
or GRST.
6−2
6.2 Socket Mask Register
This register allows software to control the CardBus card events which generate a status change interrupt. The state
of these mask bits does not prevent the corresponding bits from reacting in the socket event register (offset 00h, see
Section 6.1). See Table 6−3 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
Name
24
23
22
21
20
19
18
17
16
Socket mask
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Socket mask
Type
R
R
R
R
R
R
R
R
R
R
R
R
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Socket mask
CardBus Socket Address + 04h
Read-only, Read/Write
0000 0000h
Table 6−3. Socket Mask Register Description
BIT
SIGNAL
TYPE
31−4
RSVD
R
3†
PWRMASK
RW
FUNCTION
These bits return 0s when read.
Power cycle. This bit masks the PWRCYCLE bit in the socket present state register (offset 08h, see
Section 6.3) from causing a status change interrupt.
0 = PWRCYCLE event does not cause a CSC interrupt (default).
1 = PWRCYCLE event causes a CSC interrupt.
Card detect mask. These bits mask the CDETECT1 and CDETECT2 bits in the socket present state
register (offset 08h, see Section 6.3) from causing a CSC interrupt.
2−1†
0†
CDMASK
CSTSMASK
RW
RW
00 = Insertion/removal does not cause a CSC interrupt (default).
01 = Reserved (undefined)
10 = Reserved (undefined)
11 = Insertion/removal causes a CSC interrupt.
CSTSCHG mask. This bit masks the CARDSTS field in the socket present state register (offset 08h, see
Section 6.3) from causing a CSC interrupt.
0 = CARDSTS event does not cause a CSC interrupt (default).
1 = CARDSTS event causes a CSC interrupt.
† This bit is cleared only by the assertion of GRST when PME is enabled. If PME is not enabled, then this bit is cleared by the assertion of PRST
or GRST.
6−3
6.3 Socket Present State Register
This register reports information about the socket interface. Writes to the socket force event register (offset 0Ch, see
Section 6.4), as well as general socket interface status, are reflected here. Information about PC Card VCC support
and card type is only updated at each insertion. Also note that the PCI6x21/PCI6x11 controller uses the CCD1 and
CCD2 signals during card identification, and changes on these signals during this operation are not reflected in this
register.
Bit
31
30
29
28
27
26
25
Name
24
23
22
21
20
19
18
17
16
Socket present state
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Socket present state
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
X
0
0
0
X
X
X
Register:
Offset:
Type:
Default:
Socket present state
CardBus Socket Address + 08h
Read-only
3000 00XXh
Table 6−4. Socket Present State Register Description
BIT
SIGNAL
TYPE
FUNCTION
31
YVSOCKET
R
YV socket. This bit indicates whether or not the socket can supply VCC = Y.Y V to PC Cards. The
PCI6x21/PCI6x11 controller does not support Y.Y-V VCC; therefore, this bit is always reset unless
overridden by the socket force event register (offset 0Ch, see Section 6.4). This bit defaults to 0.
30
XVSOCKET
R
XV socket. This bit indicates whether or not the socket can supply VCC = X.X V to PC Cards. The
PCI6x21/PCI6x11 controller does not support X.X-V VCC; therefore, this bit is always reset unless
overridden by the socket force event register (offset 0Ch, see Section 6.4). This bit defaults to 0.
29
3VSOCKET
R
3-V socket. This bit indicates whether or not the socket can supply VCC = 3.3 Vdc to PC Cards. The
PCI6x21/PCI6x11 controller does support 3.3-V VCC; therefore, this bit is always set unless overridden
by the socket force event register (offset 0Ch, see Section 6.4).
28
5VSOCKET
R
5-V socket. This bit indicates whether or not the socket can supply VCC = 5 Vdc to PC Cards. The
PCI6x21/PCI6x11 controller does support 5-V VCC; therefore, this bit is always set unless overridden
by bit 6 of the device control register (PCI offset 92h, see Section 4.39).
27−14
RSVD
R
These bits return 0s when read.
13 †
YVCARD
R
YV card. This bit indicates whether or not the PC Card inserted in the socket supports VCC = Y.Y Vdc.
This bit can be set by writing a 1 to the corresponding bit in the socket force event register (offset 0Ch,
see Section 6.4).
12 †
XVCARD
R
XV card. This bit indicates whether or not the PC Card inserted in the socket supports VCC = X.X Vdc.
This bit can be set by writing a 1 to the corresponding bit in the socket force event register (offset 0Ch,
see Section 6.4).
11 †
3VCARD
R
3-V card. This bit indicates whether or not the PC Card inserted in the socket supports VCC = 3.3 Vdc.
This bit can be set by writing a 1 to the corresponding bit in the socket force event register (offset 0Ch,
see Section 6.4).
10 †
5VCARD
R
5-V card. This bit indicates whether or not the PC Card inserted in the socket supports VCC = 5 Vdc.
This bit can be set by writing a 1 to the corresponding bit in the socket force event register (offset 0Ch,
see Section 6.4).
† One or more bits in the register are PME context bits and can be cleared only by the assertion of GRST when PME is enabled. If PME is not
enabled, then these bits are cleared by the assertion of PRST or GRST.
6−4
Table 6−4. Socket Present State Register Description (Continued)
BIT
SIGNAL
TYPE
9†
BADVCCREQ
R
8†
DATALOST
R
FUNCTION
Bad VCC request. This bit indicates that the host software has requested that the socket be powered at
an invalid voltage.
0 = Normal operation (default)
1 = Invalid VCC request by host software
Data lost. This bit indicates that a PC Card removal event may have caused lost data because the cycle
did not terminate properly or because write data still resides in the PCI6x21/PCI6x11 controller.
0 = Normal operation (default)
1 = Potential data loss due to card removal
7†
NOTACARD
R
Not a card. This bit indicates that an unrecognizable PC Card has been inserted in the socket. This bit is
not updated until a valid PC Card is inserted into the socket.
0 = Normal operation (default)
1 = Unrecognizable PC Card detected
6
IREQCINT
R
READY(IREQ)//CINT. This bit indicates the current status of the READY(IREQ)//CINT signal at the PC
Card interface.
0 = READY(IREQ)//CINT is low.
1 = READY(IREQ)//CINT is high.
5†
CBCARD
R
CardBus card detected. This bit indicates that a CardBus PC Card is inserted in the socket. This bit is not
updated until another card interrogation sequence occurs (card insertion).
4†
16BITCARD
R
16-bit card detected. This bit indicates that a 16-bit PC Card is inserted in the socket. This bit is not
updated until another card interrogation sequence occurs (card insertion).
3†
PWRCYCLE
R
Power cycle. This bit indicates the status of each card powering request. This bit is encoded as:
0 = Socket is powered down (default).
1 = Socket is powered up.
2†
CDETECT2
R
CCD2. This bit reflects the current status of the CCD2 signal at the PC Card interface. Changes to this
signal during card interrogation are not reflected here.
0 = CCD2 is low (PC Card may be present)
1 = CCD2 is high (PC Card not present)
1†
CDETECT1
R
CCD1. This bit reflects the current status of the CCD1 signal at the PC Card interface. Changes to this
signal during card interrogation are not reflected here.
0 = CCD1 is low (PC Card may be present).
1 = CCD1 is high (PC Card not present).
CSTSCHG. This bit reflects the current status of the CSTSCHG signal at the PC Card interface.
0 = CSTSCHG is low.
1 = CSTSCHG is high.
† One or more bits in the register are PME context bits and can be cleared only by the assertion of GRST when PME is enabled. If PME is not
enabled, then these bits are cleared by the assertion of PRST or GRST.
0
CARDSTS
R
6.4 Socket Force Event Register
This register is used to force changes to the socket event register (offset 00h, see Section 6.1) and the socket present
state register (offset 08h, see Section 6.3). The CVSTEST bit (bit 14) in this register must be written when forcing
changes that require card interrogation. See Table 6−5 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
Name
24
23
22
21
20
19
18
17
16
Socket force event
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
Socket force event
R
W
X
X
Register:
Offset:
Type:
Default:
W
W
W
W
W
W
W
R
W
W
W
W
W
W
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Socket force event
CardBus Socket Address + 0Ch
Read-only, Write-only
0000 XXXXh
6−5
Table 6−5. Socket Force Event Register Description
BIT
SIGNAL
TYPE
31−15
RSVD
R
Reserved. These bits return 0s when read.
14
CVSTEST
W
Card VS test. When this bit is set, the PCI6x21/PCI6x11 controller reinterrogates the PC Card, updates
the socket present state register (offset 08h, see Section 6.3), and re-enables the socket power control.
13
FYVCARD
W
Force YV card. Writes to this bit cause the YVCARD bit in the socket present state register (offset 08h,
see Section 6.3) to be written. When set, this bit disables the socket power control.
12
FXVCARD
W
Force XV card. Writes to this bit cause the XVCARD bit in the socket present state register (offset 08h,
see Section 6.3) to be written. When set, this bit disables the socket power control.
11
F3VCARD
W
Force 3-V card. Writes to this bit cause the 3VCARD bit in the socket present state register (offset 08h,
see Section 6.3) to be written. When set, this bit disables the socket power control.
10
F5VCARD
W
Force 5-V card. Writes to this bit cause the 5VCARD bit in the socket present state register (offset 08h,
see Section 6.3) to be written. When set, this bit disables the socket power control.
9
FBADVCCREQ
W
Force BadVccReq. Changes to the BADVCCREQ bit in the socket present state register (offset 08h,
see Section 6.3) can be made by writing this bit.
8
FDATALOST
W
Force data lost. Writes to this bit cause the DATALOST bit in the socket present state register (offset
08h, see Section 6.3) to be written.
7
FNOTACARD
W
Force not a card. Writes to this bit cause the NOTACARD bit in the socket present state register (offset
08h, see Section 6.3) to be written.
6
RSVD
R
This bit returns 0 when read.
5
FCBCARD
W
Force CardBus card. Writes to this bit cause the CBCARD bit in the socket present state register (offset
08h, see Section 6.3) to be written.
4
F16BITCARD
W
Force 16-bit card. Writes to this bit cause the 16BITCARD bit in the socket present state register (offset
08h, see Section 6.3) to be written.
3
FPWRCYCLE
W
Force power cycle. Writes to this bit cause the PWREVENT bit in the socket event register (offset 00h,
see Section 6.1) to be written, and the PWRCYCLE bit in the socket present state register (offset 08h,
see Section 6.3) is unaffected.
2
FCDETECT2
W
Force CCD2. Writes to this bit cause the CD2EVENT bit in the socket event register (offset 00h, see
Section 6.1) to be written, and the CDETECT2 bit in the socket present state register (offset 08h, see
Section 6.3) is unaffected.
1
FCDETECT1
W
Force CCD1. Writes to this bit cause the CD1EVENT bit in the socket event register (offset 00h, see
Section 6.1) to be written, and the CDETECT1 bit in the socket present state register (offset 08h, see
Section 6.3) is unaffected.
0
FCARDSTS
W
Force CSTSCHG. Writes to this bit cause the CSTSEVENT bit in the socket event register (offset 00h,
see Section 6.1) to be written. The CARDSTS bit in the socket present state register (offset 08h, see
Section 6.3) is unaffected.
6−6
FUNCTION
6.5 Socket Control Register
This register provides control of the voltages applied to the socket VPP and VCC. The PCI6x21/PCI6x11 controller
ensures that the socket is powered up only at acceptable voltages when a CardBus card is inserted. See Table 6−6
for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
Name
24
23
22
21
20
19
18
17
16
Socket control
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Socket control
Type
R
R
R
R
R
R
RW
R
RW
RW
RW
RW
R
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Socket control
CardBus Socket Address + 10h
Read-only, Read/Write
0000 0000h
Table 6−6. Socket Control Register Description
BIT
SIGNAL
TYPE
FUNCTION
31−11
RSVD
R
These bits return 0s when read.
10
RSVD
R
This bit returns 1 when read.
9−8
RSVD
R
These bits return 0s when read.
This bit controls how the CardBus clock run state machine decides when to stop the CardBus clock
to the CardBus card:
7
STOPCLK
RW
0 = The CardBus CLKRUN protocol can only attempt to stop/slow the CaredBus clock if the
sockethas been idle for 8 clocks and the PCI CLKRUN protocol is preparing to stop/slow the
PCI bus clock.
1 = The CardBus CLKRUN protocol can only attempt to stop/slow the CaredBus clock if the
socket has been idle for 8 clocks, regardless of the state of the PCI CLKRUN signal.
6−4 †
VCCCTRL
RW
3
RSVD
R
VCC control. These bits are used to request card VCC changes.
000 = Request power off (default)
100 = Request VCC = X.X V
001 = Reserved
101 = Request VCC = Y.Y V
010 = Request VCC = 5 V
110 = Reserved
011 = Request VCC = 3.3 V
111 = Reserved
This bit returns 0 when read.
VPP control. These bits are used to request card VPP changes.
000 = Request power off (default)
100 = Request VPP = X.X V
2−0 †
VPPCTRL
RW
001 = Request VPP = 12 V
101 = Request VPP = Y.Y V
010 = Request VPP = 5 V
110 = Reserved
011 = Request VPP = 3.3 V
111 = Reserved
† One or more bits in the register are PME context bits and can be cleared only by the assertion of GRST when PME is enabled. If PME is not
enabled, then this bit is cleared by the assertion of PRST or GRST.
6−7
6.6 Socket Power Management Register
This register provides power management control over the socket through a mechanism for slowing or stopping the
clock on the card interface when the card is idle. See Table 6−7 for a complete description of the register contents.
Bit
31
30
29
28
27
26
Name
25
24
23
22
21
20
19
18
17
16
Socket power management
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Socket power management
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Socket power management
CardBus Socket Address + 20h
Read-only, Read/Write
0000 0000h
Table 6−7. Socket Power Management Register Description
BIT
SIGNAL
TYPE
31−26
RSVD
R
25 ‡
SKTACCES
R
24 ‡
SKTMODE
R
23−17
RSVD
R
16
CLKCTRLEN
RW
15−1
RSVD
R
FUNCTION
Reserved. These bits return 0s when read.
Socket access status. This bit provides information on whether a socket access has occurred. This bit is
cleared by a read access.
0 = No PC Card access has occurred (default).
1 = PC Card has been accessed.
Socket mode status. This bit provides clock mode information.
0 = Normal clock operation
1 = Clock frequency has changed.
These bits return 0s when read.
CardBus clock control enable. This bit, when set, enables clock control according to bit 0 (CLKCTRL).
0
CLKCTRL
RW
0 = Clock control disabled (default)
1 = Clock control enabled
These bits return 0s when read.
CardBus clock control. This bit determines whether the CardBus CLKRUN protocol attempts to stop or
slow the CardBus clock during idle states. The CLKCTRLEN bit enables this bit.
0 = Allows the CardBus CLKRUN protocol to attempt to stop the CardBus clock (default)
1 = Allows the CardBus CLKRUN protocol to attempt to slow the CardBus clock by a factor of 16
‡ One or more bits in this register are cleared only by the assertion of GRST.
6−8
7 Flash Media Controller Programming Model
This section describes the internal PCI configuration registers used to program the PCI6x21/PCI6x11 flash media
controller interface. All registers are detailed in the same format: a brief description for each register is followed by
the register offset and a bit table describing the reset state for each register.
A bit description table, typically included when the register contains bits of more than one type or purpose, indicates
bit field names, a detailed field description, and field access tags which appear in the type column. Table 4−1
describes the field access tags.
The PCI6x21/PCI6x11 controller is a multifunction PCI device. The flash media controller core is integrated as PCI
function 3. The function 3 configuration header is compliant with the PCI Local Bus Specification as a standard
header. Table 7−1 illustrates the configuration header that includes both the predefined portion of the configuration
space and the user-definable registers.
Table 7−1. Function 3 Configuration Register Map
REGISTER NAME
OFFSET
Device ID
Vendor ID
00h
Status
Command
04h
Class code
BIST
Header type
Latency timer
Revision ID
08h
Cache line size
0Ch
Flash media base address
10h
Reserved
14h−28h
Subsystem ID ‡
Subsystem vendor ID ‡
Reserved
30h
Reserved
PCI power
management
capabilities pointer
34h
Interrupt line
3Ch
Reserved
Maximum latency
Minimum grant
2Ch
38h
Interrupt pin
Reserved
40h
Power management capabilities
Next item pointer
PM data
(Reserved)
Power management control and status ‡
48h
General control ‡
4Ch
PMCSR_BSE
Reserved
Capability ID
Subsystem access
44h
50h
Diagnostic ‡
54h
Reserved
58h−FCh
‡ One or more bits in this register are cleared only by the assertion of GRST.
7−1
7.1 Vendor ID Register
The vendor ID register contains a value allocated by the PCI SIG and identifies the manufacturer of the PCI device.
The vendor ID assigned to Texas Instruments is 104Ch.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Vendor ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
1
0
0
0
0
0
1
0
0
1
1
0
0
Register:
Offset:
Type:
Default:
Vendor ID
00h
Read-only
104Ch
7.2 Device ID Register
The device ID register contains a value assigned to the flash media controller by Texas Instruments. The device
identification for the flash media controller is 8033h.
Bit
15
14
13
12
11
10
9
Type
R
R
R
R
R
R
R
R
Default
1
0
0
0
0
0
0
0
Name
7
6
5
4
3
2
1
0
R
R
R
R
R
R
R
R
0
0
1
1
0
0
1
1
Device ID
Register:
Offset:
Type:
Default:
7−2
8
Device ID
02h
Read-only
8033h
7.3 Command Register
The command register provides control over the PCI6x21/PCI6x11 interface to the PCI bus. All bit functions adhere
to the definitions in the PCI Local Bus Specification, as seen in the following bit descriptions. See Table 7−2 for a
complete description of the register contents.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Command
Type
R
R
R
R
R
RW
R
RW
R
RW
R
RW
R
RW
RW
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Command
04h
Read/Write, Read-only
0000h
Table 7−2. Command Register Description
BIT
FIELD NAME
TYPE
15−11
RSVD
R
DESCRIPTION
10
INT_DISABLE
RW
INTx disable. When set to 1, this bit disables the function from asserting interrupts on the INTx signals.
0 = INTx assertion is enabled (default)
1 = INTx assertion is disabled
9
FBB_ENB
R
Fast back-to-back enable. The flash media interface does not generate fast back-to-back transactions;
therefore, bit 9 returns 0 when read.
8
SERR_ENB
RW
SERR enable. When bit 8 is set to 1, the flash media interface SERR driver is enabled. SERR can be
asserted after detecting an address parity error on the PCI bus.
7
STEP_ENB
R
Address/data stepping control. The flash media interface does not support address/data stepping;
therefore, bit 7 is hardwired to 0.
6
PERR_ENB
RW
Parity error enable. When bit 6 is set to 1, the flash media interface is enabled to drive PERR response
to parity errors through the PERR signal.
5
VGA_ENB
R
VGA palette snoop enable. The flash media interface does not feature VGA palette snooping;
therefore, bit 5 returns 0 when read.
4
MWI_ENB
RW
Memory write and invalidate enable. The flash media controller does not generate memory write
invalidate transactions; therefore, bit 4 returns 0 when read.
3
SPECIAL
R
Special cycle enable. The flash media interface does not respond to special cycle transactions;
therefore, bit 3 returns 0 when read.
2
MASTER_ENB
RW
Bus master enable. When bit 2 is set to 1, the flash media interface is enabled to initiate cycles on the
PCI bus.
1
MEMORY_ENB
RW
Memory response enable. Setting bit 1 to 1 enables the flash media interface to respond to memory
cycles on the PCI bus.
0
IO_ENB
R
I/O space enable. The flash media interface does not implement any I/O-mapped functionality;
therefore, bit 0 returns 0 when read.
Reserved. Bits 15−11 return 0s when read.
7−3
7.4 Status Register
The status register provides device information to the host system. All bit functions adhere to the definitions in the
PCI Local Bus Specification, as seen in the following bit descriptions. Bits in this register may be read normally. A
bit in the status register is reset when a 1 is written to that bit location; a 0 written to a bit location has no effect. See
Table 7−3 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
8
Name
Type
Default
7
6
5
4
3
2
1
0
Status
RCU
RCU
RCU
RCU
RCU
R
R
RCU
R
R
R
R
RU
R
R
R
0
0
0
0
0
0
1
0
0
0
0
1
0
0
0
0
Register:
Offset:
Type:
Default:
Status
06h
Read/Clear/Update, Read-only
0210h
Table 7−3. Status Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15
PAR_ERR
RCU
Detected parity error. Bit 15 is set to 1 when either an address parity or data parity error is detected.
14
SYS_ERR
RCU
Signaled system error. Bit 14 is set to 1 when SERR is enabled and the flash media controller has
signaled a system error to the host.
13
MABORT
RCU
Received master abort. Bit 13 is set to 1 when a cycle initiated by the flash media controller on the PCI
bus has been terminated by a master abort.
12
TABORT_REC
RCU
Received target abort. Bit 12 is set to 1 when a cycle initiated by the flash media controller on the PCI
bus was terminated by a target abort.
11
TABORT_SIG
RCU
Signaled target abort. Bit 11 is set to 1 by the flash media controller when it terminates a transaction
on the PCI bus with a target abort.
10−9
PCI_SPEED
R
DEVSEL timing. Bits 10 and 9 encode the timing of DEVSEL and are hardwired to 01b, indicating that
the flash media controller asserts this signal at a medium speed on nonconfiguration cycle accesses.
8
DATAPAR
RCU
Data parity error detected. Bit 8 is set to 1 when the following conditions have been met:
a. PERR was asserted by any PCI device including the flash media controller.
b. The flash media controller was the bus master during the data parity error.
c. Bit 6 (PERR_EN) in the command register at offset 04h in the PCI configuration space
(see Section 7.3) is set to 1.
7−4
7
FBB_CAP
R
Fast back-to-back capable. The flash media controller cannot accept fast back-to-back transactions;
therefore, bit 7 is hardwired to 0.
6
UDF
R
User-definable features (UDF) supported. The flash media controller does not support the UDF;
therefore, bit 6 is hardwired to 0.
5
66MHZ
R
66-MHz capable. The flash media controller operates at a maximum PCLK frequency of 33 MHz;
therefore, bit 5 is hardwired to 0.
4
CAPLIST
R
Capabilities list. Bit 4 returns 1 when read, indicating that the flash media controller supports additional
PCI capabilities.
3
INT_STATUS
RU
Interrupt status. This bit reflects the interrupt status of the function. Only when bit 10 (INT_DISABLE)
in the command register (see Section 7.3) is a 0 and this bit is 1, is the function’s INTx signal asserted.
Setting the INT_DISABLE bit to 1 has no effect on the state of this bit. This bit is set only when a valid
interrupt condition exists. This bit is not set when an interrupt condition exists and signaling of that event
is not enabled.
2−0
RSVD
R
Reserved. Bits 3−0 return 0s when read.
7.5 Class Code and Revision ID Register
The class code and revision ID register categorizes the base class, subclass, and programming interface of the
function. The base class is 01h, identifying the controller as a mass storage controller. The subclass is 80h, identifying
the function as other mass storage controller, and the programming interface is 00h. Furthermore, the TI chip revision
is indicated in the least significant byte (00h). See Table 7−4 for a complete description of the register contents.
Bit
31
30
29
28
27
26
R
R
R
R
R
R
R
R
R
Name
Type
25
24
23
22
21
20
19
18
17
16
R
R
R
R
R
R
R
Class code and revision ID
Default
0
0
0
0
0
0
0
1
1
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Name
Class code and revision ID
Register:
Offset:
Type:
Default:
Class code and revision ID
08h
Read-only
0180 0000h
Table 7−4. Class Code and Revision ID Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
31−24
BASECLASS
R
Base class. This field returns 01h when read, which classifies the function as a mass storage controller.
23−16
SUBCLASS
R
Subclass. This field returns 80h when read, which specifically classifies the function as other mass
storage controller.
15−8
PGMIF
R
Programming interface. This field returns 00h when read.
7−0
CHIPREV
R
Silicon revision. This field returns 00h when read, which indicates the silicon revision of the flash media
controller.
7.6 Latency Timer and Class Cache Line Size Register
The latency timer and class cache line size register is programmed by host BIOS to indicate system cache line size
and the latency timer associated with the flash media controller. See Table 7−5 for a complete description of the
register contents.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Latency timer and class cache line size
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Latency timer and class cache line size
0Ch
Read/Write
0000h
Table 7−5. Latency Timer and Class Cache Line Size Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15−8
LATENCY_TIMER
RW
PCI latency timer. The value in this register specifies the latency timer for the flash media controller,
in units of PCI clock cycles. When the flash media controller is a PCI bus initiator and asserts FRAME,
the latency timer begins counting from zero. If the latency timer expires before the flash media
transaction has terminated, then the flash media controller terminates the transaction when its GNT
is deasserted.
7−0
CACHELINE_SZ
RW
Cache line size. This value is used by the flash media controller during memory write and invalidate,
memory-read line, and memory-read multiple transactions.
7−5
7.7 Header Type and BIST Register
The header type and built-in self-test (BIST) register indicates the flash media controller PCI header type and no
built-in self-test. See Table 7−6 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Name
8
7
6
5
4
3
2
1
0
R
R
R
R
R
R
R
R
1
0
0
0
0
0
0
0
Header type and BIST
Register:
Offset:
Type:
Default:
Header type and BIST
0Eh
Read-only
0010h
Table 7−6. Header Type and BIST Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15−8
BIST
R
Built-in self-test. The flash media controller does not include a BIST; therefore, this field returns 00h
when read.
7−0
HEADER_TYPE
R
PCI header type. The flash media controller includes the standard PCI header. Bit 7 indicates if the flash
media is a multifunction device.
7.8 Flash Media Base Address Register
The flash media base address register specifies the base address of the memory-mapped interface registers. Since
the implementation of the flash media controller core in the PCI6x21/PCI6x11 controller contains 2 sockets, the size
of the base address register is 8192 bytes. See Table 7−7 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
Name
Type
Default
23
22
21
20
19
18
17
16
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
6
5
4
3
2
1
0
Flash media base address
Name
Type
24
Flash media base address
RW
RW
RW
RW
RW
R
R
R
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Flash media base address
10h
Read/Write, Read-only
0000 0000h
Table 7−7. Flash Media Base Address Register Description
BIT
FIELD NAME
TYPE
31−12
BAR
RW
11−4
RSVD
R
Reserved. Bits 11−4 return 0s when read to indicate that the size of the base address is 8192 bytes.
3
PREFETCHABLE
R
Prefetchable. Since this base address is not prefetchable, bit 3 returns 0 when read.
2−1
RSVD
R
Reserved. Bits 2−1 return 0s when read.
0
MEM_INDICATOR
R
Memory space indicator. Bit 0 is hardwired to 0 to indicate that the base address maps into memory
space.
7−6
DESCRIPTION
Base address. This field specifies the upper bits of the 32-bit starting base address.
7.9 Subsystem Vendor Identification Register
The subsystem identification register, used for system and option card identification purposes, may be required for
certain operating systems. This read-only register is initialized through the EEPROM and can be written through the
subsystem access register at PCI offset 50h (see Section 7.22). All bits in this register are reset by GRST only.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Subsystem vendor identification
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Subsystem vendor identification
2Ch
Read/Update
0000h
7.10 Subsystem Identification Register
The subsystem identification register, used for system and option card identification purposes, may be required for
certain operating systems. This read-only register is initialized through the EEPROM and can be written through the
subsystem access register at PCI offset 50h (see Section 7.22). All bits in this register are reset by GRST only.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Subsystem identification
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Subsystem identification
2Eh
Read/Update
0000h
7.11 Capabilities Pointer Register
The power management capabilities pointer register provides a pointer into the PCI configuration header where the
power-management register block resides. Since the PCI power management registers begin at 44h, this read-only
register is hardwired to 44h.
Bit
7
6
5
Type
R
R
R
R
Default
0
1
0
0
Name
4
3
2
1
0
R
R
R
R
0
1
0
0
Capabilities pointer
Register:
Offset:
Type:
Default:
Capabilities pointer
34h
Read-only
44h
7−7
7.12 Interrupt Line Register
The interrupt line register is programmed by the system and indicates to the software which interrupt line the flash
media interface has assigned to it. The default value of this register is FFh, indicating that an interrupt line has not
yet been assigned to the function.
Bit
7
6
5
4
Name
Type
Default
3
2
1
0
Interrupt line
RW
RW
RW
RW
RW
RW
RW
RW
1
1
1
1
1
1
1
1
Register:
Offset:
Type:
Default:
Interrupt line
3Ch
Read/Write
FFh
7.13 Interrupt Pin Register
This register decodes the interrupt select inputs and returns the proper interrupt value based on Table 7−8, indicating
that the flash media interface uses an interrupt. If one of the USE_INTx terminals is asserted, the interrupt select bits
are ignored, and this register returns the interrupt value for the highest priority USE_INTx terminal that is asserted.
If bit 28, the tie-all bit (TIEALL), in the system control register (PCI offset 80h, see Section 4.29) is set to 1, then the
PCI6x21/PCI6x11 controller asserts the USE_INTA input to the flash media controller core. If bit 28 (TIEALL) in the
system control register (PCI offset 80h, see Section 4.29) is set to 0, then none of the USE_INTx inputs are asserted
and the interrupt for the flash media function is selected by the INT_SEL bits in the flash media general control register.
Bit
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
X
X
X
Name
Interrupt pin
Register:
Offset:
Type:
Default:
Interrupt pin
3Dh
Read-only
0Xh
Table 7−8. PCI Interrupt Pin Register
7−8
INT_SEL BITS
USE_INTA
INTPIN
00
0
01h (INTA)
01
0
02h (INTB)
10
0
03h (INTC)
11
0
04h (INTD)
XX
1
01h (INTA)
7.14 Minimum Grant Register
The minimum grant register contains the minimum grant value for the flash media controller core.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
Minimum grant
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
1
1
1
Register:
Offset:
Type:
Default:
Minimum grant
3Eh
Read/Update
07h
Table 7−9. Minimum Grant Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
7−0
MIN_GNT
RU
Minimum grant. The contents of this field may be used by host BIOS to assign a latency timer register value
to the flash media controller. The default for this register indicates that the flash media controller may need
to sustain burst transfers for nearly 64 µs and thus request a large value be programmed in bits 15−8 of
the PCI6x21/PCI6x11 latency timer and class cache line size register at offset 0Ch in the PCI configuration
space (see Section 7.6).
7.15 Maximum Latency Register
The maximum latency register contains the maximum latency value for the flash media controller core.
Bit
7
6
5
RU
RU
RU
RU
0
0
0
0
Name
Type
Default
4
3
2
1
0
RU
RU
RU
RU
0
1
0
0
Maximum latency
Register:
Offset:
Type:
Default:
Maximum latency
3Eh
Read/Update
04h
Table 7−10. Maximum Latency Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
7−0
MAX_LAT
RU
Maximum latency. The contents of this field may be used by host BIOS to assign an arbitration priority level
to the flash media controller. The default for this register indicates that the flash media controller may need
to access the PCI bus as often as every 0.25 µs; thus, an extremely high priority level is requested. The
contents of this field may also be loaded through the serial EEPROM.
7−9
7.16 Capability ID and Next Item Pointer Registers
The capability ID and next item pointer register identifies the linked-list capability item and provides a pointer to the
next capability item. See Table 7−11 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Name
9
8
7
6
5
4
3
2
1
0
Capability ID and next item pointer
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
Register:
Offset:
Type:
Default:
Capability ID and next item pointer
44h
Read-only
0001h
Table 7−11. Capability ID and Next Item Pointer Registers Description
7−10
BIT
FIELD NAME
TYPE
DESCRIPTION
15−8
NEXT_ITEM
R
Next item pointer. The flash media controller supports only one additional capability, PCI power
management, that is communicated to the system through the extended capabilities list; therefore,
this field returns 00h when read.
7−0
CAPABILITY_ID
R
Capability identification. This field returns 01h when read, which is the unique ID assigned by the PCI
SIG for PCI power-management capability.
7.17 Power Management Capabilities Register
The power management capabilities register indicates the capabilities of the flash media controller related to PCI
power management. See Table 7−12 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Power management capabilities
RU
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0
1
1
1
1
1
1
0
0
0
0
0
0
0
1
0
Register:
Offset:
Type:
Default:
Power management capabilities
46h
Read/Update, Read-only
7E02h
Table 7−12. Power Management Capabilities Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15
PME_D3COLD
RU
PME support from D3cold. This bit can be set to 1 or cleared to 0 via bit 4 (D3_COLD) in the general
control register at offset 4Ch in the PCI configuration space (see Section 7.21). When this bit is set to
1, it indicates that the controller is capable of generating a PME wake event from D3cold. This bit state
is dependent upon the PCI6x21/PCI6x11 VAUX implementation and may be configured by using bit 4
(D3_COLD) in the general control register (see Section 7.21).
14−11
PME_SUPPORT
R
PME support. This 4-bit field indicates the power states from which the flash media interface may
assert PME. This field returns a value of 1111b by default, indicating that PME may be asserted from
the D3hot, D2, D1, and D0 power states.
10
D2_SUPPORT
R
D2 support. Bit 10 is hardwired to 1, indicating that the flash media controller supports the D2 power
state.
9
D1_SUPPORT
R
D1 support. Bit 9 is hardwired to 1, indicating that the flash media controller supports the D1 power
state.
8−6
AUX_CURRENT
R
Auxiliary current. This 3-bit field reports the 3.3-VAUX auxiliary current requirements. When bit 15
(PME_D3COLD) is cleared, this field returns 000b; otherwise, it returns 001b.
000b = Self-powered
001b = 55 mA (3.3-VAUX maximum current required)
5
DSI
R
Device-specific initialization. This bit returns 0 when read, indicating that the flash media controller
does not require special initialization beyond the standard PCI configuration header before a generic
class driver is able to use it.
4
RSVD
R
Reserved. Bit 4 returns 0 when read.
3
PME_CLK
R
PME clock. This bit returns 0 when read, indicating that the PCI clock is not required for the flash media
controller to generate PME.
2−0
PM_VERSION
R
Power-management version. This field returns 010b when read, indicating that the flash media
controller is compatible with the registers described in the PCI Bus Power Management Interface
Specification (Revision 1.1).
7−11
7.18 Power Management Control and Status Register
The power management control and status register implements the control and status of the flash media controller.
This register is not affected by the internally generated reset caused by the transition from the D3hot to D0 state. See
Table 7−13 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Power management control and status
RCU
R
R
R
R
R
R
RW
R
R
R
R
R
R
RW
RW
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Power management control and status
48h
Read/Clear, Read/Write, Read-only
0000h
Table 7−13. Power Management Control and Status Register Description
BIT
FIELD NAME
TYPE
15 ‡
PME_STAT
RCU
14−13
DATA_SCALE
R
This field returns 0s, because the data register is not implemented.
12−9
DATA_SELECT
R
This field returns 0s, because the data register is not implemented.
8‡
PME_EN
RW
7−2
RSVD
R
1−0 ‡
PWR_STATE
RW
DESCRIPTION
PME status. This bit defaults to 0.
PME enable. Enables PME signaling. assertion is disabled.
Reserved. Bits 7−2 return 0s when read.
Power state. This 2-bit field determines the current power state and sets the flash media controller to
a new power state. This field is encoded as follows:
00 = Current power state is D0.
01 = Current power state is D1.
10 = Current power state is D2.
11 = Current power state is D3hot.
‡ One or more bits in this register are cleared only by the assertion of GRST.
7.19 Power Management Bridge Support Extension Register
The power management bridge support extension register provides extended power-management features not
applicable to the flash media controller; thus, it is read-only and returns 0 when read.
Bit
7
6
Type
R
R
R
R
R
Default
0
0
0
0
0
Name
4
3
2
1
0
R
R
R
0
0
0
Power management bridge support extension
Register:
Offset:
Type:
Default:
7−12
5
Power management bridge support extension
4Ah
Read-only
00h
7.20 Power Management Data Register
The power management bridge support extension register provides extended power-management features not
applicable to the flash media controller; thus, it is read-only and returns 0 when read.
Bit
7
6
5
Name
4
3
2
1
0
Power management data
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Power management data
4Bh
Read-only
00h
7.21 General Control Register
The general control register provides miscellaneous PCI-related configuration. See Table 7−14 for a complete
description of the register contents.
Bit
7
6
5
Name
4
3
2
1
0
General control
Type
R
R
R
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
General control
4Ch
Read/Write, Read-only
00h
Table 7−14. General Control Register
BIT
FIELD NAME
TYPE
7
RSVD
R
6−5 ‡
INT_SEL
RW
DESCRIPTION
Reserved. Bit 7 returns 0 when read.
Interrupt select. These bits are program the INTPIN register and set which interrupt output is used.
This field is ignored if one of the USE_INTx terminals is asserted.
00 =
01 =
10 =
11 =
INTA
INTB
INTC
INTD
4‡
D3_COLD
RW
D3cold PME support. This bit sets and clears the D3cold PME support bit in the power management
capabilities register.
3
RSVD
R
2‡
SM_DIS
RW
SmartMedia disable. Setting this bit disables support for SmartMedia cards. The flash media
controller reports a SmardMedia card as an unsupported card if this bit is set. If this bit is set, then
all of the SM_SUPPORT bits in the socket enumeration register are 0.
1‡
MMC_SD_DIS
RW
MMC/SD disable. Setting this bit disables support for MMC/SD cards. The flash media controller
reports a MMC/SD card as an unsupported card if this bit is set. If this bit is set, then all of the
SD_SUPPORT bits in the socket enumeration register are 0.
0‡
MS_DIS
RW
Memory Stick disable. Setting this bit disables support for Memory Stick cards. The flash media
controller reports a Memory Stick card as an unsupported card if this bit is set. If this bit is set, then
all of the MS_SUPPORT bits in the socket enumeration register are 0.
Reserved. Bit 3 returns 0 when read.
‡ One or more bits in this register are cleared only by the assertion of GRST.
7−13
7.22 Subsystem Access Register
The contents of the subsystem access register are aliased to the subsystem vendor ID and subsystem ID registers
at PCI offsets 2Ch and 2Eh, respectively. See Table 7−15 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
Name
Type
24
23
22
21
20
19
18
17
16
Subsystem access
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
Subsystem access
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Subsystem access
50h
Read/Write
0000 0000h
Table 7−15. Subsystem Access Register Description
BIT
FIELD NAME
TYPE
31−16
SubsystemID
RW
Subsystem device ID. The value written to this field is aliased to the subsystem ID register at
PCI offset 2Eh.
15−0
SubsystemVendorID
RW
Subsystem vendor ID. The value written to this field is aliased to the subsystem vendor ID
register at PCI offset 2Ch.
7−14
DESCRIPTION
7.23 Diagnostic Register
This register programs the M and N inputs to the PLL and enables the diagnostic modes. The default values for M
and N in this register set the PLL output to be 80 MHz, which is divided to get the 40 MHz and 20 MHz needed by
the flash media cores. See Table 7−16 for a complete description of the register contents. All bits in this register are
reset by GRST only.
Bit
31
30
29
28
27
26
25
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
Name
24
23
22
21
20
19
18
17
16
R
R
R
R
R
R
R
R/W
0
0
0
0
0
0
0
0
7
6
5
4
3
2
1
0
Diagnostic
Name
Diagnostic
Type
R
R
R
R
R
R
R
R/W
R
R
R
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
1
1
0
0
0
0
0
1
0
1
Register:
Type:
Offset:
Default:
Diagnostic
Read-only, Read/Write
54h
0000 0305h
Table 7−16. Diagnostic Register Description
BIT
SIGNAL
TYPE
31−17
TBD_CTRL
R
16
DIAGNOSTIC
RW
15−11
RSVD
R
10−8
PLL_N
RW
7−5
RSVD
R
4−0
PLL_M
RW
FUNCTION
PLL control bits. These bits are reserved for PLL control and test bits.
Diagnostic test bit. This test bit shortens the PLL clock CLK_VALID time and shortens the card detect
debounce times for simulation and TDL.
Reserved. Bits 15−11 return 0s when read.
PLL_N input. The default value of this field is 03h.
Reserved. Bits 7−5 return 0s when read.
PLL_M input. The default value of this field is 05h.
7−15
7−16
8 SD Host Controller Programming Model
This section describes the internal PCI configuration registers used to program the PCI6x21/PCI6x11 SD host
controller interface. All registers are detailed in the same format: a brief description for each register is followed by
the register offset and a bit table describing the reset state for each register.
A bit description table, typically included when the register contains bits of more than one type or purpose, indicates
bit field names, a detailed field description, and field access tags which appear in the type column. Table 4−1
describes the field access tags.
The PCI6x21/PCI6x11 controller is a multifunction PCI device. The SD host controller core is integrated as PCI
function 4. The function 4 configuration header is compliant with the PCI Local Bus Specification as a standard
header. Table 8−1 illustrates the configuration header that includes both the predefined portion of the configuration
space and the user-definable registers.
Table 8−1. Function 4 Configuration Register Map
REGISTER NAME
OFFSET
Device ID
Vendor ID
00h
Status
Command
04h
Class code
BIST
Header type
Latency timer
Revision ID
08h
Cache line size
0Ch
Slot 0 base address
10h
Slot 1 base address
14h
Slot 2 base address
18h
Reserved
Subsystem ID ‡
1Ch−28h
Subsystem vendor ID ‡
Reserved
30h
PCI power
management
capabilities pointer
Reserved
Reserved
Maximum latency
Minimum grant
2Ch
34h
38h
Interrupt pin
Reserved
Interrupt line
3Ch
Slot information
40h
Reserved
44h−7Ch
Power management capabilities
Next item pointer
PM data
(Reserved)
Power management control and status ‡
84h
General control ‡
88h
PMCSR_BSE
Reserved
Capability ID
80h
Subsystem alias
8Ch
Diagnostic ‡
90h
Reserved
Slot 0 3.3-V
maximum current
94h
Reserved
Slot 1 3.3-V
maximum current
98h
Reserved
Slot 2 3.3-V
maximum current
9Ch
Reserved
A0h−FCh
‡ One or more bits in this register are cleared only by the assertion of GRST.
8−1
8.1 Vendor ID Register
The vendor ID register contains a value allocated by the PCI SIG and identifies the manufacturer of the PCI device.
The vendor ID assigned to Texas Instruments is 104Ch.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Vendor ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
1
0
0
0
0
0
1
0
0
1
1
0
0
Register:
Offset:
Type:
Default:
Vendor ID
00h
Read-only
104Ch
8.2 Device ID Register
The device ID register contains a value assigned to the SD host controller by Texas Instruments. The device
identification for the SD host controller is 8034h.
Bit
15
14
13
12
11
10
9
Type
R
R
R
R
R
R
R
R
Default
1
0
0
0
0
0
0
0
Name
7
6
5
4
3
2
1
0
R
R
R
R
R
R
R
R
0
0
1
1
0
1
0
0
Device ID
Register:
Offset:
Type:
Default:
8−2
8
Device ID
02h
Read-only
8034h
8.3 Command Register
The command register provides control over the SD host controller interface to the PCI bus. All bit functions adhere
to the definitions in the PCI Local Bus Specification, as seen in the following bit descriptions. See Table 8−2 for a
complete description of the register contents.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Command
Type
R
R
R
R
R
RW
R
RW
R
RW
R
RW
R
RW
RW
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Command
04h
Read/Write, Read-only
0000h
Table 8−2. Command Register Description
BIT
FIELD NAME
TYPE
15−11
RSVD
R
DESCRIPTION
10
INT_DISABLE
RW
INTx disable. When set to 1, this bit disables the function from asserting interrupts on the INTx signals.
0 = INTx assertion is enabled (default)
1 = INTx assertion is disabled
9
FBB_ENB
R
Fast back-to-back enable. The SD host controller does not generate fast back-to-back transactions;
therefore, bit 9 returns 0 when read.
8
SERR_ENB
RW
SERR enable. When bit 8 is set to 1, the SD host controller SERR driver is enabled. SERR can be
asserted after detecting an address parity error on the PCI bus.
7
STEP_ENB
R
Address/data stepping control. The SD host controller does not support address/data stepping;
therefore, bit 7 is hardwired to 0.
6
PERR_ENB
RW
Parity error enable. When bit 6 is set to 1, the SD host controller is enabled to drive PERR response
to parity errors through the PERR signal.
5
VGA_ENB
R
VGA palette snoop enable. The SD host controller does not feature VGA palette snooping; therefore,
bit 5 returns 0 when read.
4
MWI_ENB
RW
Memory write and invalidate enable. The SD host controller does not generate memory write invalidate
transactions; therefore, bit 4 returns 0 when read.
3
SPECIAL
R
Special cycle enable. The SD host controller does not respond to special cycle transactions; therefore,
bit 3 returns 0 when read.
2
MASTER_ENB
RW
Bus master enable. When bit 2 is set to 1, the SD host controller is enabled to initiate cycles on the
PCI bus.
1
MEMORY_ENB
RW
Memory response enable. Setting bit 1 to 1 enables the SD host controller to respond to memory cycles
on the PCI bus.
0
IO_ENB
R
I/O space enable. The SD host controller does not implement any I/O-mapped functionality; therefore,
bit 0 returns 0 when read.
Reserved. Bits 15−11 return 0s when read.
8−3
8.4 Status Register
The status register provides device information to the host system. All bit functions adhere to the definitions in the
PCI Local Bus Specification, as seen in the following bit descriptions. Bits in this register may be read normally. A
bit in the status register is reset when a 1 is written to that bit location; a 0 written to a bit location has no effect. See
Table 8−3 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
8
Name
Type
Default
7
6
5
4
3
2
1
0
Status
RCU
RCU
RCU
RCU
RCU
R
R
RCU
R
R
R
R
RU
R
R
R
0
0
0
0
0
0
1
0
0
0
0
1
0
0
0
0
Register:
Offset:
Type:
Default:
Status
06h
Read/Clear/Update, Read-only
0210h
Table 8−3. Status Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15
PAR_ERR
RCU
Detected parity error. Bit 15 is set to 1 when either an address parity or data parity error is detected.
14
SYS_ERR
RCU
Signaled system error. Bit 14 is set to 1 when SERR is enabled and the SD host controller has signaled
a system error to the host.
13
MABORT
RCU
Received master abort. Bit 13 is set to 1 when a cycle initiated by the SD host controller on the PCI
bus has been terminated by a master abort.
12
TABORT_REC
RCU
Received target abort. Bit 12 is set to 1 when a cycle initiated by the SD host controller on the PCI bus
was terminated by a target abort.
11
TABORT_SIG
RCU
Signaled target abort. Bit 11 is set to 1 by the SD host controller when it terminates a transaction on
the PCI bus with a target abort.
10−9
PCI_SPEED
R
DEVSEL timing. Bits 10 and 9 encode the timing of DEVSEL and are hardwired to 01b, indicating that
the SD host controller asserts this signal at a medium speed on nonconfiguration cycle accesses.
8
DATAPAR
RCU
Data parity error detected. Bit 8 is set to 1 when the following conditions have been met:
a. PERR was asserted by any PCI device including the SD host controller.
b. The SD host controller was the bus master during the data parity error.
c. Bit 6 (PERR_EN) in the command register at offset 04h in the PCI configuration space
(see Section 8.3) is set to 1.
8−4
7
FBB_CAP
R
Fast back-to-back capable. The SD host controller cannot accept fast back-to-back transactions;
therefore, bit 7 is hardwired to 0.
6
UDF
R
User-definable features (UDF) supported. The SD host controller does not support the UDF; therefore,
bit 6 is hardwired to 0.
5
66MHZ
R
66-MHz capable. The SD host controller operates at a maximum PCLK frequency of 33 MHz;
therefore, bit 5 is hardwired to 0.
4
CAPLIST
R
Capabilities list. Bit 4 returns 1 when read, indicating that the SD host controller supports additional
PCI capabilities.
3
INT_STATUS
RU
Interrupt status. This bit reflects the interrupt status of the function. Only when bit 10 (INT_DISABLE)
in the command register (see Section 8.3) is a 0 and this bit is 1, is the function’s INTx signal asserted.
Setting the INT_DISABLE bit to 1 has no effect on the state of this bit. This bit is set only when a valid
interrupt condition exists. This bit is not set when an interrupt condition exists and signaling of that event
is not enabled.
2−0
RSVD
R
Reserved. Bits 3−0 return 0s when read.
8.5 Class Code and Revision ID Register
The class code and revision ID register categorizes the base class, subclass, and programming interface of the
function. The base class is 08h, identifying the controller as a generic system peripheral. The subclass is 05h,
identifying the function as an SD host controller. The programming interface is 01h, indicating that the function is a
standard SD host with DMA capabilities. Furthermore, the TI chip revision is indicated in the least significant byte
(00h). See Table 8−4 for a complete description of the register contents.
Bit
31
30
29
28
27
26
Name
25
24
23
22
21
20
19
18
17
16
Class code and revision ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
1
0
0
0
0
0
0
0
0
1
0
1
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Class code and revision ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
X
X
X
X
X
X
X
X
X
Register:
Offset:
Type:
Default:
Class code and revision ID
08h
Read-only
0805 0XXXh
Table 8−4. Class Code and Revision ID Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
31−24
BASECLASS
R
Base class. This field returns 08h when read, which broadly classifies the function as a generic system
peripheral.
23−16
SUBCLASS
R
Subclass. This field returns 05h when read, which specifically classifies the function as an SD host
controller.
15−8
PGMIF
R
Programming interface. If bit 0 (DMA_EN) in the general control register is 0, then this field returns 00h
when read to indicate that the function is a standard SD host without DMA capabilities. If the DMA_EN
bit is 1, then this field returns 01h when read to indicate that the function is a standard SD host with
DMA capabilities.
7−0
CHIPREV
R
Silicon revision. This field returns the silicon revision of the SD host controller.
8−5
8.6 Latency Timer and Class Cache Line Size Register
The latency timer and class cache line size register is programmed by host BIOS to indicate system cache line size
and the latency timer associated with the SD host controller. See Table 8−5 for a complete description of the register
contents.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Latency timer and class cache line size
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Latency timer and class cache line size
0Ch
Read/Write
0000h
Table 8−5. Latency Timer and Class Cache Line Size Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15−8
LATENCY_TIMER
RW
PCI latency timer. The value in this register specifies the latency timer for the SD host controller, in units
of PCI clock cycles. When the SD host controller is a PCI bus initiator and asserts FRAME, the latency
timer begins counting from zero. If the latency timer expires before the SD host transaction has
terminated, then the SD host controller terminates the transaction when its GNT is deasserted.
7−0
CACHELINE_SZ
RW
Cache line size. This value is used by the SD host controller during memory write and invalidate,
memory-read line, and memory-read multiple transactions.
8.7 Header Type and BIST Register
The header type and built-in self-test (BIST) register indicates the SD host controller PCI header type and no built-in
self-test. See Table 8−6 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Header type and BIST
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
x
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Header type and BIST
0Eh
Read-only
00x0h
Table 8−6. Header Type and BIST Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15−8
BIST
R
Built-in self-test. The SD host controller does not include a BIST; therefore, this field returns 00h when
read.
7−0
HEADER_TYPE
R
PCI header type. The SD host controller includes the standard PCI header. Bit 7 indicates if the SD host
is a multifunction device.
8−6
8.8 SD Host Base Address Register
The SD host base address register specifies the base address of the memory-mapped interface registers for each
standard SD host socket. The size of each base address register (BAR) is 256 bytes. The number of BARs is
dependent on the number of SD sockets in the implementation See Table 8−7 for a complete description of the
register contents.
Bit
31
30
29
28
27
26
25
Name
Type
24
23
22
21
20
19
18
17
16
SD host base address
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
SD host base address
RW
RW
RW
RW
RW
R
R
R
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
SD host base address
10h
Read/Write, Read-only
0000 0000h
Table 8−7. SD host Base Address Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
31−8
BAR
RW
Base address. This field specifies the upper 24 bits of the 32-bit starting base address. The size of
the base address is 256 bytes.
7−4
RSVD
R
Reserved. Bits 7−4 return 0s when read.
3
PREFETCHABLE
R
Prefetchable indicator. This bit is hardwired to 0 to indicate that the memory space is not prefetchable.
2−1
TYPE
R
This field is hardwired to 00 to indicate that the base address is located in 32-bit address space.
0
MEM_INDICATOR
R
Memory space indicator. Bit 0 is hardwired to 0 to indicate that the base address maps into memory
space.
8.9 Subsystem Vendor Identification Register
The subsystem identification register, used for system and option card identification purposes, may be required for
certain operating systems. This read-only register is initialized through the EEPROM and can be written through the
subsystem access register at PCI offset 8Ch (see Section 8.23). All bits in this register are reset by GRST only.
Bit
15
14
13
12
11
10
RU
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
0
0
0
0
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
0
0
Subsystem vendor identification
Register:
Offset:
Type:
Default:
Subsystem vendor identification
2Ch
Read/Update
0000h
8−7
8.10 Subsystem Identification Register
The subsystem identification register, used for system and option card identification purposes, may be required for
certain operating systems. This read-only register is initialized through the EEPROM and can be written through the
subsystem access register at PCI offset 8Ch (see Section 8.23). All bits in this register are reset by GRST only.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Subsystem identification
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Subsystem identification
2Eh
Read/Update
0000h
8.11 Capabilities Pointer Register
The power management capabilities pointer register provides a pointer into the PCI configuration header where the
power-management register block resides. Since the PCI power management registers begin at 80h, this read-only
register is hardwired to 80h.
Bit
7
6
5
Type
R
R
R
R
Default
1
0
0
0
Name
4
3
2
1
0
R
R
R
R
0
0
0
0
Capabilities pointer
Register:
Offset:
Type:
Default:
Capabilities pointer
34h
Read-only
80h
8.12 Interrupt Line Register
The interrupt line register is programmed by the system and indicates to the software which interrupt line the SD host
controller has assigned to it. The default value of this register is FFh, indicating that an interrupt line has not yet been
assigned to the function.
Bit
7
6
5
4
Name
Type
Default
2
1
0
RW
RW
RW
RW
RW
RW
RW
RW
1
1
1
1
1
1
1
1
Register:
Offset:
Type:
Default:
8−8
3
Interrupt line
Interrupt line
3Ch
Read/Write
FFh
8.13 Interrupt Pin Register
This register decodes the interrupt select inputs and returns the proper interrupt value based on Table 8−8, indicating
that the SD host controller uses an interrupt. If one of the USE_INTx terminals is asserted, the interrupt select bits
are ignored, and this register returns the interrupt value for the highest priority USE_INTx terminal that is asserted.
If bit 28, the tie-all bit (TIEALL), in the system control register (PCI offset 80h, see Section 4.29) is set to 1, then the
PCI6x21/PCI6x11 controller asserts the USE_INTA input to the SD host controller core. If bit 28 (TIEALL) in the
system control register (PCI offset 80h, see Section 4.29) is set to 0, then none of the USE_INTx inputs are asserted
and the interrupt for the SD host controller function is selected by the INT_SEL bits in the SD host general control
register.
Bit
7
6
5
4
Name
3
2
1
0
Interrupt pin
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
X
X
X
Register:
Offset:
Type:
Default:
Interrupt pin
3Dh
Read-only
0Xh
Table 8−8. PCI Interrupt Pin Register
INT_SEL BITS
USE_INTA
INTPIN
00
0
01h (INTA)
01
0
02h (INTB)
10
0
03h (INTC)
11
0
04h (INTD)
XX
1
01h (INTA)
8.14 Minimum Grant Register
The minimum grant register contains the minimum grant value for the SD host controller core.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
Minimum grant
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
1
1
1
Register:
Offset:
Type:
Default:
Minimum grant
3Eh
Read/Update
07h
Table 8−9. Minimum Grant Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
7−0
MIN_GNT
RU
Minimum grant. The contents of this field may be used by host BIOS to assign a latency timer register value
to the SD host controller. The default for this register indicates that the SD host controller may need to
sustain burst transfers for nearly 64 µs and thus request a large value be programmed in bits 15−8 of the
PCI6x21/PCI6x11 latency timer and class cache line size register at offset 0Ch in the PCI configuration
space (see Section 8.6).
8−9
8.15 Maximum Latency Register
The maximum latency register contains the maximum latency value for the SD host controller core.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
Maximum latency
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
1
0
0
Register:
Offset:
Type:
Default:
Maximum latency
3Fh
Read/Update
04h
Table 8−10. Maximum Latency Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
7−0
MAX_LAT
RU
Maximum latency. The contents of this field may be used by host BIOS to assign an arbitration priority level
to the SD host controller. The default for this register indicates that the SD host controller may need to
access the PCI bus as often as every 0.25 µs; thus, an extremely high priority level is requested. The
contents of this field may also be loaded through the serial EEPROM.
8.16 Slot Information Register
This read-only register contains information on the number of SD sockets implemented and the base address
Registers used.
Bit
7
6
5
Type
R
R
R
R
Default
0
X
X
X
Name
4
3
2
1
0
R
R
R
R
0
0
0
0
Slot information
Register:
Offset:
Type:
Default:
Maximum latency
40h
Read/Update
X0h
Table 8−11. Maximum Latency Register Description
BIT
FIELD NAME
TYPE
7
RSVD
R
Reserved. This bit returns 0 when read.
6−4
NUMBER_SLOTS
R
Number of slots. This field indicates the number of SD sockets supported by the SD host controller.
Since the controller supports three SD sockets, this field returns 010 when read.
3
RSVD
R
Reserved. This bit returns 0 when read.
2−0
FIRST_BAR
R
First base address register number. This field is hardwired to 000b to indicate that the first BAR used
for the SD host standard registers is BAR0.
8−10
DESCRIPTION
8.17 Capability ID and Next Item Pointer Registers
The capability ID and next item pointer register identifies the linked-list capability item and provides a pointer to the
next capability item. See Table 8−12 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Name
9
8
7
6
5
4
3
2
1
0
Capability ID and next item pointer
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
Register:
Offset:
Type:
Default:
Capability ID and next item pointer
80h
Read-only
0001h
Table 8−12. Capability ID and Next Item Pointer Registers Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15−8
NEXT_ITEM
R
Next item pointer. The SD host controller supports only one additional capability, PCI power
management, that is communicated to the system through the extended capabilities list; therefore,
this field returns 00h when read.
7−0
CAPABILITY_ID
R
Capability identification. This field returns 01h when read, which is the unique ID assigned by the PCI
SIG for PCI power-management capability.
8−11
8.18 Power Management Capabilities Register
The power management capabilities register indicates the capabilities of the SD host controller related to PCI power
management. See Table 8−13 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Power management capabilities
RU
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0
1
1
1
1
1
1
0
0
0
0
0
0
0
1
0
Register:
Offset:
Type:
Default:
Power management capabilities
82h
Read/Update, Read-only
7E02h
Table 8−13. Power Management Capabilities Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15
PME_D3COLD
RU
PME support from D3cold. This bit can be set to 1 or cleared to 0 via bit 4 (D3_COLD) in the general
control register at offset 88h in the PCI configuration space (see Section 8.22). When this bit is set to
1, it indicates that the SD host controller is capable of generating a PME wake event from D3cold. This
bit state is dependent upon the SD host controller VAUX implementation and may be configured by
using bit 4 (D3_COLD) in the general control register (see Section 8.22).
14−11
PME_SUPPORT
R
PME support. This 4-bit field indicates the power states from which the SD host controller may assert
PME. This field returns a value of 1111b by default, indicating that PME may be asserted from
the D3hot, D2, D1, and D0 power states.
10
D2_SUPPORT
R
D2 support. Bit 10 is hardwired to 1, indicating that the SD host controller supports the D2 power state.
9
D1_SUPPORT
R
D1 support. Bit 9 is hardwired to 1, indicating that the SD host controller supports the D1 power state.
8−6
AUX_CURRENT
R
5
DSI
R
3.3-VAUX auxiliary current requirements. This requirement is design dependent.
Device-specific initialization. This bit returns 0 when read, indicating that the SD host controller does
not require special initialization beyond the standard PCI configuration header before a generic class
driver is able to use it.
4
RSVD
R
Reserved. Bit 4 returns 0 when read.
3
PME_CLK
R
PME clock. This bit returns 0 when read, indicating that the PCI clock is not required for the SD host
controller to generate PME.
2−0
PM_VERSION
R
Power-management version. This field returns 010b when read, indicating that the SD host controller
is compatible with the registers described in the PCI Bus Power Management Interface Specification
(Revision 1.1).
8−12
8.19 Power Management Control and Status Register
The power management control and status register implements the control and status of the SD host controller. This
register is not affected by the internally generated reset caused by the transition from the D3hot to D0 state. See
Table 8−14 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Power management control and status
RCU
R
R
R
R
R
R
RW
R
R
R
R
R
R
RW
RW
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Power management control and status
84h
Read/Clear, Read/Write, Read-only
0000h
Table 8−14. Power Management Control and Status Register Description
BIT
FIELD NAME
TYPE
15 ‡
PME_STAT
RCU
14−13
DATA_SCALE
R
Data scale. This field returns 0s when read, because the SD host controller does not use the data
register.
12−9
DATA_SELECT
R
Data select. This field returns 0s when read, because the SD host controller does not use the data
register.
8‡
PME_EN
RW
7−2
RSVD
R
1−0 ‡
PWR_STATE
RW
DESCRIPTION
PME status. This bit defaults to 0.
PME enable. Enables PME signaling.
Reserved. Bits 7−2 return 0s when read.
Power state. This 2-bit field determines the current power state and sets the SD host controller to a
new power state. This field is encoded as follows:
00 = Current power state is D0.
01 = Current power state is D1.
10 = Current power state is D2.
11 = Current power state is D3hot.
‡ One or more bits in this register are cleared only by the assertion of GRST.
8.20 Power Management Bridge Support Extension Register
The power management bridge support extension register provides extended power-management features not
applicable to the SD host controller; thus, it is read-only and returns 00h when read.
Bit
7
6
Name
5
4
3
2
1
0
Power management bridge support extension
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Power management bridge support extension
86h
Read-only
00h
8−13
8.21 Power Management Data Register
The power management bridge support extension register provides extended power-management features not
applicable to the SD host controller; thus, it is read-only and returns 0 when read.
Bit
7
6
5
Name
4
3
2
1
0
Power management data
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Power management data
87h
Read-only
00h
8.22 General Control Register
The general control register provides miscellaneous PCI-related configuration. See Table 8−15 for a complete
description of the register contents.
Bit
7
6
5
Type
R
RW
RW
RW
Default
0
0
0
0
Name
4
3
2
1
0
RW
RW
RW
RW
0
0
0
0
General control
Register:
Offset:
Type:
Default:
General control
88h
Read/Write, Read-only
00h
Table 8−15. General Control Register
BIT
FIELD NAME
TYPE
7
RSVD
R
6−5 ‡
INT_SEL
RW
DESCRIPTION
Reserved. Bit 7 returns 0 when read.
Interrupt select. These bits are program the INTPIN register and set which interrupt output is used.
This field is ignored if one of the USE_INTx terminals is asserted.
00 =
01 =
10 =
11 =
4‡
D3_COLD
RW
3−1
RSVD
R
0‡
DMA_EN
RW
INTA
INTB
INTC
INTD
D3cold PME support. This bit sets and clears the D3cold PME support bit in the power management
capabilities register.
Reserved. Bits 3−1 return 0s when read.
DMA enable. This bit enables DMA functionality of the SD host controller core. When this bit is set,
the PGMIF field in the class code register returns 01h and the DMA_SUPPORT bit in the capabilities
register of each SD host socket is set. When this bit is 0, the PGMIF field returns 00h and the
DMA_SUPPORT bit of each SD host socket is 0.
‡ One or more bits in this register are cleared only by the assertion of GRST.
8−14
8.23 Subsystem Access Register
The contents of the subsystem access register are aliased to the subsystem vendor ID and subsystem ID registers
at PCI offsets 2Ch and 2Eh, respectively. See Table 8−16 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
Name
Type
Default
23
22
21
20
19
18
17
16
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
7
6
5
4
3
2
1
0
Subsystem access
Name
Type
24
Subsystem access
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Subsystem access
8Ch
Read/Write
0000 0000h
Table 8−16. Subsystem Access Register Description
BIT
FIELD NAME
TYPE
31−16
SubsystemID
RW
Subsystem device ID. The value written to this field is aliased to the subsystem ID register at
PCI offset 2Eh.
DESCRIPTION
15−0
SubsystemVendorID
RW
Subsystem vendor ID. The value written to this field is aliased to the subsystem vendor ID
register at PCI offset 2Ch.
8.24 Diagnostic Register
This register enables the diagnostic modes. See Table 8−17 for a complete description of the register contents. All
bits in this register are reset by GRST only.
Bit
31
30
29
28
27
26
25
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Name
24
23
22
21
20
19
18
17
16
R
R
R
R
R
R
R
RW
0
0
0
0
0
0
0
0
7
6
5
4
3
2
1
0
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
Diagnostic
Name
Diagnostic
Register:
Type:
Offset:
Default:
Diagnostic
Read-only, Read/Write
90h
0000 0000h
Table 8−17. Diagnostic Register Description
BIT
SIGNAL
TYPE
31−17
RSVD
R
16
DIAGNOSTIC
RW
15−0
RSVD
R
FUNCTION
Reserved. Bits 31−17 return 0s when read.
Diagnostic test bit. This test bit shortens the card detect debounce times for simulation and TDL.
Reserved. Bits 15−0 return 0s when read.
8−15
8.25 Slot 0 3.3-V Maximum Current Register
This register is a read/write register and the contents of this register are aliased to the 3_3_MAX_CURRENT field
in the slot 0 maximum current capabilities register at offset 48h in the SD host standard registers. This register is a
GRST only register.
Bit
7
6
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
5
4
3
2
1
0
RW
RW
RW
0
0
0
Slot 0 3.3-V maximum current
Register:
Type:
Offset:
Default:
Slot 3.3-V maximum current
Read/Write
94h
0000h
8.26 Slot 1 3.3-V Maximum Current Register
This register is a read/write register and the contents of this register are aliased to the 3_3_MAX_CURRENT field
in the slot 1 maximum current capabilities register at offset 48h in the SD host standard registers. This register is a
GRST only register. If slot 1 is not implemented, this register is read-only and returns 0s when read.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
Slot 1 3.3-V maximum current
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Type:
Offset:
Default:
Slot 1 3.3-V maximum current
Read/Write
98h
0000h
8.27 Slot 2 3.3-V Maximum Current Register
This register is a read/write register and the contents of this register are aliased to the 3_3_MAX_CURRENT field
in the slot 2 maximum current capabilities register at offset 48h in the SD host standard registers. This register is a
GRST only register. If slot 2 is not implemented, this register is read-only and returns 0s when read.
Bit
7
6
Name
Type
Default
4
3
2
1
0
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Type:
Offset:
Default:
8−16
5
Slot 2 3.3-V maximum current
Slot 2 3.3-V maximum current
Read/Write
9Ch
0000h
8.28 Slot 3 3.3-V Maximum Current Register
This register is a read/write register and the contents of this register are aliased to the 3_3_MAX_CURRENT field
in the slot 3 maximum current capabilities register at offset 48h in the SD host standard registers. This register is a
GRST only register. If slot 3 is not implemented, this register is read-only and returns 0s when read.
Bit
7
6
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
5
4
3
2
1
0
RW
RW
RW
0
0
0
Slot 3 3.3-V maximum current
Register:
Type:
Offset:
Default:
Slot 3 3.3-V maximum current
Read/Write
A0h
0000h
8.29 Slot 4 3.3-V Maximum Current Register
This register is a read/write register and the contents of this register are aliased to the 3_3_MAX_CURRENT field
in the slot 4 maximum current capabilities register at offset 48h in the SD host standard registers. This register is a
GRST only register. If slot 4 is not implemented, this register is read-only and returns 0s when read.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
Slot 4 3.3-V maximum current
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Type:
Offset:
Default:
Slot 4 3.3-V maximum current
Read/Write
A4h
0000h
8.30 Slot 5 3.3-V Maximum Current Register
This register is a read/write register and the contents of this register are aliased to the 3_3_MAX_CURRENT field
in the slot 5 maximum current capabilities register at offset 48h in the SD host standard registers. This register is a
GRST only register. If slot 5 is not implemented, this register is read-only and returns 0s when read.
Bit
7
6
Name
Type
Default
5
4
3
2
1
0
Slot 5 3.3-V maximum current
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Type:
Offset:
Default:
Slot 5 3.3-V maximum current
Read/Write
A8h
0000h
8−17
8−18
9 Smart Card Controller Programming Model
This section describes the internal PCI configuration registers used to program the PCI6x21/PCI6x11 Smart Card
controller interface. All registers are detailed in the same format: a brief description for each register is followed by
the register offset and a bit table describing the reset state for each register.
A bit description table, typically included when the register contains bits of more than one type or purpose, indicates
bit field names, a detailed field description, and field access tags which appear in the type column. Table 4−1
describes the field access tags.
The PCI6x21/PCI6x11 controller is a multifunction PCI device. The Smart Card controller core is integrated as PCI
function 5. The function 5 configuration header is compliant with the PCI Local Bus Specification as a standard
header. Table 9−1 illustrates the configuration header that includes both the predefined portion of the configuration
space and the user-definable registers.
Table 9−1. Function 5 Configuration Register Map
REGISTER NAME
OFFSET
Device ID
Vendor ID
00h
Status
Command
04h
Class code
BIST
Header type
Latency timer
Revision ID
08h
Cache line size
0Ch
SC global control base address
10h
SC socket 0 base address
14h
SC socket 1 base address
18h
Reserved
1Ch−28h
Subsystem ID ‡
Subsystem vendor ID ‡
Reserved
30h
PCI power
management
capabilities pointer
Reserved
Reserved
Maximum latency
Minimum grant
2Ch
34h
38h
Interrupt pin
Interrupt line
Reserved
3Ch
40h
Power management capabilities
Next item pointer
PM data
(Reserved)
Power management control and status ‡
48h
General control ‡
4Ch
PMCSR_BSE
Reserved
Capability ID
44h
Subsystem alias
50h
Class code alias
54h
Smart Card configuration 1
58h
Smart Card configuration 2
5Ch
Reserved
‡ One or more bits in this register are cleared only by the assertion of GRST.
60h−FCh
9−1
9.1 Vendor ID Register
The vendor ID register contains a value allocated by the PCI SIG and identifies the manufacturer of the PCI device.
The vendor ID assigned to Texas Instruments is 104Ch.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Vendor ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
1
0
0
0
0
0
1
0
0
1
1
0
0
Register:
Offset:
Type:
Default:
Vendor ID
00h
Read-only
104Ch
9.2 Device ID Register
The device ID register contains a value assigned to the Smart Card controller by Texas Instruments. The device
identification for the Smart Card controller is 8035h.
Bit
15
14
13
12
11
10
9
Type
R
R
R
R
R
R
R
R
Default
1
0
0
0
0
0
0
0
Name
7
6
5
4
3
2
1
0
R
R
R
R
R
R
R
R
0
0
1
1
0
1
0
1
Device ID
Register:
Offset:
Type:
Default:
9−2
8
Device ID
02h
Read-only
8035h
9.3 Command Register
The command register provides control over the Smart Card controller interface to the PCI bus. All bit functions
adhere to the definitions in the PCI Local Bus Specification, as seen in the following bit descriptions. The SERR_EN
and PERR_EN enable bits in this register are internally wired-OR between other functions, and these control bits
appear separately according to their software function. See Table 9−2 for a complete description of the register
contents.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Command
Type
R
R
R
R
R
RW
R
RW
R
RW
R
R
R
R
RW
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Command
04h
Read/Write, Read-only
0000h
Table 9−2. Command Register Description
BIT
FIELD NAME
TYPE
15−11
RSVD
R
DESCRIPTION
10
INT_DIS
RW
INTx disable. When set to 1, this bit disables the function from asserting interrupts on the INTx signals.
0 = INTx assertion is enabled (default)
1 = INTx assertion is disabled
9
FBB_EN
R
Fast back-to-back enable. The Smart Card interface does not generate fast back-to-back transactions;
therefore, bit 9 returns 0 when read.
8
SER_EN
RW
System error (SERR) enable. Bit 8 controls the enable for the SERR driver on the PCI interface. SERR
can be asserted after detecting an address parity error on the PCI bus. Both bits 8 and 6 (PERR_EN)
must be set for this function to report address parity errors.
0 = Disable SERR output driver (default)
1 = Enable SERR output driver
7
RSVD
R
6
PERR_EN
RW
Parity error response enable. Bit 6 controls this function response to parity errors through PERR. Data
parity errors are indicated by asserting PERR, whereas address parity errors are indicated by
asserting SERR.
0 = This function ignores detected parity error (default)
1 = This function responds to detected parity errors
5
VGA_EN
R
VGA palette snoop enable. The Smart Card interface does not feature VGA palette snooping;
therefore, bit 5 returns 0 when read.
4
MWI_EN
R
Memory write and invalidate enable. The Smart Card controller does not generate memory write
invalidate transactions; therefore, bit 4 returns 0 when read.
3
SPECIAL
R
Special cycle enable. The Smart Card interface does not respond to special cycle transactions;
therefore, bit 3 returns 0 when read.
2
MAST_EN
R
Bus master enable. This function is target only.
1
MEM_EN
RW
0
IO_EN
R
Reserved. Bits 15−11 return 0s when read.
Reserved. Bit 7 returns 0 when read.
Memory space enable. This bit controls memory access.
0 = Disables this function from responding to memory space accesses (default)
1 = Enables this function to respond to memory space accesses
I/O space enable. The Smart Card interface does not implement any I/O-mapped functionality;
therefore, bit 0 returns 0 when read.
9−3
9.4 Status Register
The status register provides device information to the host system. All bit functions adhere to the definitions in the
PCI Local Bus Specification, as seen in the following bit descriptions. Bits in this register may be read normally. A
bit in the status register is reset when a 1 is written to that bit location; a 0 written to a bit location has no effect. See
Table 9−3 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
8
Name
Type
Default
7
6
5
4
3
2
1
0
Status
RCU
RCU
R
R
RCU
R
R
R
R
R
R
R
RU
R
R
R
0
0
0
0
0
0
1
0
0
0
0
1
0
0
0
0
Register:
Offset:
Type:
Default:
Status
06h
Read/Clear/Update, Read-only
0210h
Table 9−3. Status Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15
PAR_ERR
RCU
Detected parity error. Bit 15 is set to 1 when either an address parity or data parity error is detected.
14
SYS_ERR
RCU
Signaled system error. Bit 14 is set to 1 when SERR is enabled and the Smart Card controller has
signaled a system error to the host.
13
MABORT
R
This function does not support bus mastering. This bit is hardwired to 0.
12
TABT_REC
R
This function does not support bus mastering and never receives a target abort. This bit is hardwired
to 0.
11
TABT_SIG
RCU
Signaled target abort. Bit 11 is set to 1 by the Smart Card controller when it terminates a transaction
on the PCI bus with a target abort.
10−9
PCI_SPEED
R
DEVSEL timing. Bits 10 and 9 encode the timing of DEVSEL and are hardwired to 01b, indicating that
the Smart Card controller asserts this signal at a medium speed on nonconfiguration cycle accesses.
8
DATAPAR
R
This function does not support bus mastering. This bit is hardwired to 0.
7
FBB_CAP
R
Fast back-to-back capable. The Smart Card controller cannot accept fast back-to-back transactions;
therefore, bit 7 is hardwired to 0.
6
RSVD
R
Reserved. Bit 6 returns 0 when read.
5
66MHZ
R
66-MHz capable. The Smart Card controller operates at a maximum PCLK frequency of 33 MHz;
therefore, bit 5 is hardwired to 0.
4
CAPLIST
R
Capabilities list. Bit 4 returns 1 when read, indicating that the Smart Card controller supports additional
PCI capabilities. The linked list of PCI power-management capabilities is implemented in this function.
3
INT_STAT
RU
Interrupt status. This bit reflects the interrupt status of the function. Only when bit 10 (INT_DISABLE)
in the command register (see Section 7.3) is a 0 and this bit is 1, is the function’s INTx signal asserted.
Setting the INT_DISABLE bit to 1 has no effect on the state of this bit. This bit is set only when a valid
interrupt condition exists. This bit is not set when an interrupt condition exists and signaling of that event
is not enabled.
2−0
RSVD
R
9−4
Reserved. Bits 3−0 return 0s when read.
9.5 Class Code and Revision ID Register
The class code and revision ID register categorizes the base class, subclass, and programming interface of the
function. The base class is 07h, identifying the controller as a communication device. The subclass is 80h, identifying
the function as other mass storage controller, and the programming interface is 00h. Furthermore, the TI chip revision
is indicated in the least significant byte (00h). See Table 9−4 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
RU
RU
RU
RU
RU
RU
RU
RU
RU
Name
Type
24
23
22
21
20
19
18
17
16
RU
RU
RU
RU
RU
RU
RU
Class code and revision ID
Default
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Name
Type
Default
Class code and revision ID
Register:
Offset:
Type:
Default:
Class code and revision ID
08h
Read-only
0780 0000h
Table 9−4. Class Code and Revision ID Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
31−24
BASECLASS
R
Base class. This field returns 07h when read, which classifies the function as a communication device.
23−16
SUBCLASS
R
Subclass. This field returns 80h when read, which specifically classifies the function as other mass
storage controller.
15−8
PGMIF
R
Programming interface. This field returns 00h when read.
7−0
CHIPREV
R
Silicon revision. This field returns 00h when read, which indicates the silicon revision of the Smart Card
controller.
9.6 Latency Timer and Class Cache Line Size Register
The latency timer and class cache line size register is programmed by host BIOS to indicate system cache line size
and the latency timer associated with the Smart Card controller. See Table 9−5 for a complete description of the
register contents.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Latency timer and class cache line size
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Latency timer and class cache line size
0Ch
Read/Write
0000h
Table 9−5. Latency Timer and Class Cache Line Size Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15−8
LATENCY_TIMER
RW
PCI latency timer. The value in this register specifies the latency timer for the Smart Card controller,
in units of PCI clock cycles. When the Smart Card controller is a PCI bus initiator and asserts FRAME,
the latency timer begins counting from zero. If the latency timer expires before the Smart Card
transaction has terminated, then the Smart Card controller terminates the transaction when its GNT
is deasserted.
7−0
CACHELINE_SZ
RW
Cache line size. This value is used by the Smart Card controller during memory write and invalidate,
memory-read line, and memory-read multiple transactions.
9−5
9.7 Header Type and BIST Register
The header type and built-in self-test (BIST) register indicates the Smart Card controller PCI header type and no
built-in self-test. See Table 9−6 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Header type and BIST
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
x
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Header type and BIST
0Eh
Read-only
00x0h
Table 9−6. Header Type and BIST Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15−8
BIST
R
Built-in self-test. The Smart Card controller does not include a BIST; therefore, this field returns 00h
when read.
7−0
HEADER_TYPE
R
PCI header type. The Smart Card controller includes the standard PCI header. Bit 7 indicates if the Smart
Card is a multifunction device.
9.8 Smart Card Base Address Register 0
This register is used by this function to determine where to forward a memory transaction to the Smart Card global
control register set. Bits 31−12 of this register are read/write and allow the base address to be located anywhere in
the 32-bit PCI memory space on 4-Kbyte boundary. The window size is always 4K bytes. Bits 11−0 are read-only and
always return 0s. Write transactions to these bits have no effect. Bit 3 (0b) specifies that this window is
nonprefetchable. Bits 2−1 (00b) specify that this memory window can allocate anywhere in the 32-bit address space.
Bit
31
30
29
28
27
26
Name
Type
25
24
23
22
21
20
19
18
17
16
Smart Card base address register 0
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
Smart Card base address register 0
RW
RW
RW
RW
R
R
R
R
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
9−6
Smart Card base address register 0
10h
Read/Write, Read-only
0000 0000h
9.9 Smart Card Base Address Register 1−4
Each socket has its own base address register. For example, a device supports three Smart Card sockets uses three
base address registers, BA1 (socket 0), BA2 (socket 1) and BA3 (socket 2).
These registers are used by this function to determine where to forward a memory transaction to the Smart Card
Control and Communication Register sets. Bits 31−12 of this register are read/write and allow the base address to
be located anywhere in the 32-bit PCI memory space on 4-Kbyte boundaries and the window size is always 4K bytes.
Bits 11−4 are read-only and always return 0s. Write transactions to these bits have no effect. Bit 3 (0b) specifies that
these windows are nonprefetchable. Bits 2−1 (00b) specify that this memory window can allocate anywhere in the
32-bit address space.
Bit
31
30
29
28
27
26
RW
RW
RW
RW
RW
RW
RW
RW
RW
Name
Type
25
24
23
22
21
20
19
18
17
16
RW
RW
RW
RW
RW
RW
RW
Smart Card base address register 1−4
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RW
RW
RW
RW
R
R
R
R
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Name
Type
Default
Smart Card base address register 1−4
Register:
Offset:
Type:
Default:
Smart Card base address register 1−4
14h, 18h, 1Ch, and 20h
Read/Write, Read-only
0000 0000h
9.10 Subsystem Vendor Identification Register
This register is read-update and can be modified through the subsystem vendor ID alias register. Default value is
104Ch. This default value complies with the WLP (Windows Logo Program) requirements without BIOS or EEPROM
configuration. All bits in this register are reset by GRST only.
Bit
15
14
13
12
11
10
RU
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
1
0
0
0
0
0
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
RU
RU
RU
RU
RU
RU
RU
1
0
0
1
1
0
0
Subsystem vendor identification
Register:
Offset:
Type:
Default:
Subsystem vendor identification
2Ch
Read/Update
104Ch
9−7
9.11 Subsystem Identification Register
This register is read-update and can be modified through the subsystem ID alias register. This register has no effect
to the functionality. Default value is 8035h. This default value complies with the WLP (Windows Logo Program)
requirements without BIOS or EEPROM configuration. All bits in this register are reset by GRST only.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Subsystem identification
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
RU
1
0
0
0
0
0
0
0
0
0
1
1
0
1
0
1
Register:
Offset:
Type:
Default:
Subsystem identification
2Eh
Read/Update
8035h
9.12 Capabilities Pointer Register
The power management capabilities pointer register provides a pointer into the PCI configuration header where the
power-management register block resides. Since the PCI power management registers begin at 44h, this read-only
register is hardwired to 44h.
Bit
7
6
5
Type
R
R
R
R
Default
0
1
0
0
Name
4
3
2
1
0
R
R
R
R
0
1
0
0
Capabilities pointer
Register:
Offset:
Type:
Default:
Capabilities pointer
34h
Read-only
44h
9.13 Interrupt Line Register
The interrupt line register is programmed by the system and indicates to the software which interrupt line the Smart
Card interface has assigned to it. The default value of this register is FFh, indicating that an interrupt line has not yet
been assigned to the function.
Bit
7
6
5
4
Name
Type
Default
2
1
0
RW
RW
RW
RW
RW
RW
RW
RW
1
1
1
1
1
1
1
1
Register:
Offset:
Type:
Default:
9−8
3
Interrupt line
Interrupt line
3Ch
Read/Write
FFh
9.14 Interrupt Pin Register
This register decodes the interrupt select inputs and returns the proper interrupt value based on Table 9−7, indicating
that the Smart Card interface uses an interrupt. If one of the USE_INTx terminals is asserted, the interrupt select bits
are ignored, and this register returns the interrupt value for the highest priority USE_INTx terminal that is asserted.
If bit 28, the tie-all bit (TIEALL), in the system control register (PCI offset 80h, see Section 4.29) is set to 1, then the
PCI6x21/PCI6x11 controller asserts the USE_INTA input to the Smart Card controller core. If bit 28 (TIEALL) in the
system control register (PCI offset 80h, see Section 4.29) is set to 0, then none of the USE_INTx inputs are asserted
and the interrupt for the Smart Card function is selected by the INT_SEL bits in the Smart Card general control register.
Bit
7
6
5
4
Name
3
2
1
0
Interrupt pin
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
X
X
X
Register:
Offset:
Type:
Default:
Interrupt pin
3Dh
Read-only
0Xh
Table 9−7. PCI Interrupt Pin Register
INT_SEL BITS
USE_INTA
INTPIN
00
0
01h (INTA)
01
0
02h (INTB)
10
0
03h (INTC)
11
0
04h (INTD)
XX
1
01h (INTA)
9.15 Minimum Grant Register
The minimum grant register contains the minimum grant value for the Smart Card controller core.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
Minimum grant
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
1
1
1
Register:
Offset:
Type:
Default:
Minimum grant
3Eh
Read/Update
07h
Table 9−8. Minimum Grant Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
7−0
MIN_GNT
RU
Minimum grant. The contents of this field may be used by host BIOS to assign a latency timer register value
to the Smart Card controller. The default for this register indicates that the Smart Card controller may need
to sustain burst transfers for nearly 64 µs and thus request a large value be programmed in bits 15−8 of
the PCI6x21/PCI6x11 latency timer and class cache line size register at offset 0Ch in the PCI configuration
space (see Section 9.6).
9−9
9.16 Maximum Latency Register
The maximum latency register contains the maximum latency value for the Smart Card controller core.
Bit
7
6
5
Name
4
3
2
1
0
Maximum latency
Type
Default
RU
RU
RU
RU
RU
RU
RU
RU
0
0
0
0
0
1
0
0
Register:
Offset:
Type:
Default:
Maximum latency
3Eh
Read/Update
04h
Table 9−9. Maximum Latency Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
7−0
MAX_LAT
RU
Maximum latency. The contents of this field may be used by host BIOS to assign an arbitration priority level
to the Smart Card controller. The default for this register indicates that the Smart Card controller may need
to access the PCI bus as often as every 0.25 µs; thus, an extremely high priority level is requested. The
contents of this field may also be loaded through the serial EEPROM.
9.17 Capability ID and Next Item Pointer Registers
The capability ID and next item pointer register identifies the linked-list capability item and provides a pointer to the
next capability item. See Table 9−10 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Type
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
Name
9
8
7
6
5
4
3
2
1
0
R
R
R
R
R
R
R
0
0
0
0
0
0
1
Capability ID and next item pointer
Register:
Offset:
Type:
Default:
Capability ID and next item pointer
44h
Read-only
0001h
Table 9−10. Capability ID and Next Item Pointer Registers Description
9−10
BIT
FIELD NAME
TYPE
DESCRIPTION
15−8
NEXT_ITEM
R
Next item pointer. The Smart Card controller supports only one additional capability, PCI power
management, that is communicated to the system through the extended capabilities list; therefore,
this field returns 00h when read.
7−0
CAPABILITY_ID
R
Capability identification. This field returns 01h when read, which is the unique ID assigned by the PCI
SIG for PCI power-management capability.
9.18 Power Management Capabilities Register
The power management capabilities register indicates the capabilities of the Smart Card controller related to PCI
power management. See Table 9−11 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Power management capabilities
RU
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0
1
1
1
1
1
1
0
0
0
0
0
0
0
1
0
Register:
Offset:
Type:
Default:
Power management capabilities
46h
Read/Update, Read-only
7E02h
Table 9−11. Power Management Capabilities Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15
PME_D3COLD
RU
PME support from D3cold. This bit can be set to 1 or cleared to 0 via bit 4 (D3_COLD) in the general
control register at offset 4Ch in the PCI configuration space (see Section 9.22). When this bit is set to
1, it indicates that the controller is capable of generating a PME wake event from D3cold. This bit state
is dependent upon the PCI6x21/PCI6x11 VAUX implementation and may be configured by using bit 4
(D3_COLD) in the general control register (see Section 9.22).
14
PME_D3HOT
R
13
PME_D2
R
12
PME_D1
R
PME support. This 4-bit field indicates the power states from which the Smart Card interface may
assert PME. This field returns a value of 1111b by default, indicating that PME may be asserted from
the D3hot, D2, D1, and D0 power states.
11
PME_D0
R
10
D2_SUPPORT
R
D2 support. Bit 10 is hardwired to 1, indicating that the Smart Card controller supports the D2 power
state.
9
D1_SUPPORT
R
D1 support. Bit 9 is hardwired to 1, indicating that the Smart Card controller supports the D1 power
state.
8−6
AUX_CURRENT
R
Auxiliary current. This 3-bit field reports the 3.3-VAUX auxiliary current requirements. When bit 15
(PME_D3COLD) is cleared, this field returns 000b; otherwise, it returns 001b.
000b = Self-powered
001b = 55 mA (3.3-VAUX maximum current required)
5
DSI
R
Device-specific initialization. This function requires device-specific initialization.
4
RSVD
R
Reserved. Bit 4 returns 0 when read.
3
PME_CLK
R
PME clock. This bit returns 0 when read, indicating that the PCI clock is not required for the Smart Card
controller to generate PME.
2−0
PM_VERSION
R
Power-management version. This field returns 010b when read, indicating that the Smart Card
controller is compatible with the registers described in the PCI Bus Power Management Interface
Specification (Revision 1.1).
9−11
9.19 Power Management Control and Status Register
The power management control and status register implements the control and status of the Smart Card controller.
This register is not affected by the internally generated reset caused by the transition from the D3hot to D0 state. See
Table 9−12 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
Power management control and status
RCU
R
R
R
R
R
R
RW
R
R
R
R
R
R
RW
RW
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Power management control and status
48h
Read/Clear/Update, Read/Write, Read-only
0000h
Table 9−12. Power Management Control and Status Register Description
BIT
FIELD NAME
TYPE
DESCRIPTION
15 ‡
PME_STAT
RCU
PME status. This bit is set when the function would normally assert the PME signal independent of the
state of PME_EN bit. Writing a 1 to this bit clears it and causes the function to stop asserting a PME
(if enabled). Writing a 0 has no effect. This bit is initialized by GRST only when the PME_D3cold bit
is 1.
14−9
RSVD
R
8‡
PME_EN
RW
7−2
RSVD
R
1−0 ‡
DSTATE
RW
Reserved. Bits 14−9 return 0s when read.
PME enable. This bit is initialized by GRST only when PME_D3cold bit is 1.
Reserved. Bits 7−2 return 0s when read.
Device State: This bit field controls device power management state. Invalid state assignments are
ignored. (ex. Current state 10b → writing 01b. This is rejected and stays 10b. See the latest PCI Local
Bus Specification.) This bit field is initialized by GRST only when PME_D3cold bit is 1.
‡ One or more bits in this register are cleared only by the assertion of GRST.
9.20 Power Management Bridge Support Extension Register
The power management bridge support extension register provides extended power-management features not
applicable to the Smart Card controller; thus, it is read-only and returns 0 when read.
Bit
7
6
Type
R
R
R
R
R
Default
0
0
0
0
0
Name
4
3
2
1
0
R
R
R
0
0
0
Power management bridge support extension
Register:
Offset:
Type:
Default:
9−12
5
Power management bridge support extension
4Ah
Read-only
00h
9.21 Power Management Data Register
The power management bridge support extension register provides extended power-management features not
applicable to the Smart Card controller; thus, it is read-only and returns 0 when read.
Bit
7
6
5
Name
4
3
2
1
0
Power management data
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Power management data
4Bh
Read-only
00h
9.22 General Control Register
This register controls this function. Information of this register can be read from the socket configuration register in
the Smart Card socket control register set. See Table 9−13 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Name
8
7
6
5
4
3
2
1
0
R
RW
RW
RW
R
R
R
R
0
0
0
0
0
0
0
0
General control
Register:
Offset:
Type:
Default:
General control
4Ch
Read/Write (EEPROM, GRST only)
0000h
Table 9−13. General Control Register
BIT
FIELD NAME
TYPE
15−7
RSVD
R
6−5 ‡
INT_SEL
RW
DESCRIPTION
Reserved. Bits 15−7 return 0s when read.
Interrupt select. These bits are program the INTPIN register and set which interrupt output is used.
This field is ignored if one of the USE_INTx terminals is asserted.
00 =
01 =
10 =
11 =
4‡
D3_COLD
RW
3−0
RSVD
R
INTA (pin = 1)
INTB (pin = 2)
INTC (pin = 3)
INTD (pin = 4)
Disable function. Setting this bit to 1 hides this function. PCI configuration register of this function
must be accessible at any time. Clock (PCI and 48 MHz) to the rest of the function blocks must be
gated to reduce power consumption.
Reserved. Bits 3−0 return 0s when read.
‡ One or more bits in this register are cleared only by the assertion of GRST.
9−13
9.23 Subsystem ID Alias Register
The contents of the subsystem access register are aliased to the subsystem vendor ID and subsystem ID registers
at PCI offsets 2Ch and 2Eh, respectively. See Table 9−14 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
Name
Type
24
23
22
21
20
19
18
17
16
Subsystem ID alias
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
1
0
0
0
0
0
0
0
0
0
1
1
0
1
0
1
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
Subsystem ID alias
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
1
0
0
0
0
0
1
0
0
1
1
0
0
Register:
Offset:
Type:
Default:
Subsystem ID alias
50h
Read/Write (EEPROM, GRST only)
8035 104Ch
Table 9−14. Subsystem ID Alias Register Description
BIT
FIELD NAME
TYPE
31−16
SubsystemID
RW
Subsystem device ID. The value written to this field is aliased to the subsystem ID register at
PCI offset 2Eh.
DESCRIPTION
15−0
SubsystemVendorID
RW
Subsystem vendor ID. The value written to this field is aliased to the subsystem vendor ID
register at PCI offset 2Ch.
9.24 Class Code Alias Register
This register is alias of the class code. Not like original register, this register is read/write and loadable from EEPROM.
Bit
31
30
29
28
27
26
25
Name
Type
24
23
22
21
20
19
18
17
16
Class code alias
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
Class code alias
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
R
R
R
R
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
9−14
Class code alias
54h
Read-only, Read/Write (EEPROM, GRST only)
0780 0000h
9.25 Smart Card Configuration 1 Register
BIOS or EEPROM configure system dependent Smart Card interface information through this register. Information
of this register can be read from the Smart Card configuration 1 alias register in the Smart Card global control register
set. The software utilizes this information and adjusts the software and firmware behavior if necessary.
Corresponding bits are tied to 0 if the socket is not implemented.
Class A and B support are depend on the system and integrated device. Supporting both classes requires method
(pins) to control 5.0 V and 3.0 V.
Default value and bit types are depending on the device. When this core is integrated into a device and does not have
all four sockets, removed sockets bits must be tied to 0 and changed to read-only bits.
See Table 9−15 for a complete description of the register contents. All bits in this register are reset by GRST only.
Bit
31
30
29
28
27
26
Name
Type
25
24
23
22
21
20
19
18
17
16
Smart Card configuration 1
RW
RW
RW
RW
R
RW
RW
RW
R
RW
RW
RW
R
RW
RW
RW
Default
0
0
0
0
0
0
1
1
0
1
1
1
0
1
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Type
R
RW
RW
RW
R
R
R
R
R
RW
RW
RW
R
RW
RW
RW
Default
0
0
1
1
0
0
1
1
0
0
0
0
0
1
1
1
Name
Smart Card configuration 1
Register:
Offset:
Type:
Default:
Smart Card configuration 1
58h
Read/Write, Read-only (EEPROM, GRST only)
0374 3307h
9−15
Table 9−15. Smart Card Configuration 1 Register Description
BIT
FIELD NAME
TYPE
31−28
SCRTCH_PAD
RW
27
CLASS_B_SKT3
R
Socket 3 Class B Smart Card support. Since socket 3 is not implemented in the controller, this
bit is a read-only 0.
26
CLASS_B_SKT2
RW
Socket 2 Class B Smart Card support. Since socket 2 is not implemented in the controller, this
bit is a read-only 0.
25
CLASS_B_SKT1
RW
Socket 1 Class B Smart Card support. When this bit is set to 1, socket 1 supports Class B Smart
Cards.
24
CLASS_B_SKT0
RW
Socket 0 Class B Smart Card support. When this bit is set to 1, socket 0 supports Class B Smart
Cards.
23
CLASS_A_SKT3
R
Socket 3 Class A Smart Card support. Since socket 3 is not implemented in the controller, this
bit is a read-only 0.
22
CLASS_A_SKT2
RW
Socket 2 Class A Smart Card support. Since socket 2 is not implemented in the controller, this
bit is a read-only 0.
21
CLASS_A_SKT1
RW
Socket 1 Class A Smart Card support. When this bit is set to 1, socket 1 supports Class A Smart
Cards.
20
CLASS_A_SKT0
RW
Socket 0 Class A Smart Card support. When this bit is set to 1, socket 0 supports Class A Smart
Cards.
19
EMVIF_EN_SKT3
R
Socket 3 EMV interface enable. Since socket 3 is not implemented in the controller, this bit is
a read-only 0.
18
EMVIF_EN_SKT2
RW
Socket 2 EMV interface enable. Since socket 2 is not implemented in the controller, this bit is
a read-only 0.
17
EMVIF_EN_SKT1
RW
Socket 1 EMV interface enable. When this bit is set to 1, the internal EVM interface for socket
1 is enabled.
16
EMVIF_EN_SKT0
RW
Socket 0 EMV interface enable. When this bit is set to 1, the internal EVM interface for socket
0 is enabled.
15
GPIO_EN_SKT3
R
Socket 3 GPIO enable. Since socket 3 is not implemented in the controller, this bit is a read-only
0.
14
GPIO_EN_SKT2
RW
Socket 2 GPIO enable. Since socket 2 is not implemented in the controller, this bit is a read-only
0.
13
GPIO_EN_SKT1
RW
Socket 1 GPIO enable. When this bit is set to 1, the SC_GPIOs for socket 1 are enabled.
12
GPIO_EN_SKT0
RW
Socket 0 GPIO enable. When this bit is set to 1, the SC_GPIOs for socket 0 are enabled.
11
PCMCIA_MODE_SKT3
R
Socket 3 PCMCIA mode. Since socket 3 is not implemented in the controller, this bit is a
read-only 0.
10
PCMCIA_MODE_SKT2
R
Socket 2 PCMCIA mode. Since socket 2 is not implemented in the controller, this bit is a
read-only 0.
9
PCMCIA_MODE_SKT1
R
Socket 1 PCMCIA mode. Since socket 1 is implemented as a dedicated socket in the controller,
this bit returns 1 when read.
8
PCMCIA_MODE_SKT0
R
Socket 0 PCMCIA mode. Since socket 0 is implemented as a dedicated socket in the controller,
this bit returns 1 when read.
7
PME_SUPPORT_SKT3
R
Socket 3 PME support. Since socket 3 is not implemented in the controller, this bit is a read-only
0.
6
PME_SUPPORT_SKT2
RW
Socket 2 PME support. Since socket 2 is not implemented in the controller, this bit is a read-only
0.
5
PME_SUPPORT_SKT1
RW
Socket 1 PME support. When this bit is set to 1, socket 1 card insertions cause a PME event.
4
PME_SUPPORT_SKT0
RW
Socket 0 PME support. When this bit is set to 1, socket 0 card insertions cause a PME event.
3
SKT3_EN
R
Socket 3 enable. Since socket 3 is not implemented in the controller, this bit is a read-only 0.
2
SKT2_EN
RW
Socket 2 enable. Since socket 2 is not implemented in the controller, this bit is a read-only 0.
1
SKT1_EN
RW
Socket 1 enable. When this bit is set to 1, socket 1 is enabled.
0
SKT0_EN
RW
Socket 0 enable. When this bit is set to 1, socket 0 is enabled.
9−16
DESCRIPTION
Scratch pad
9.26 Smart Card Configuration 2 Register
BIOS or EEPROM configure system dependent Smart Card interface information through this register. Information
of this register can be read from the Smart Card configuration 2 alias in the Smart Card global control register set.
The software utilizes this information and adjusts the software and firmware behavior, if necessary.
See Table 9−16 for a complete description of the register contents. All bits in this register are reset by GRST only.
Bit
31
30
29
28
27
26
Name
Type
25
24
23
22
21
20
19
18
17
16
Smart Card configuration 2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Name
Type
Default
Smart Card configuration 2
Register:
Offset:
Type:
Default:
Smart Card Configuration 2
54h
Read-only, Read/Write (EEPROM, GRST only)
0000 0000h
Table 9−16. Smart Card Configuration 2 Register Description
BIT
SIGNAL
TYPE
31−16
RSVD
R
Reserved. Bits 31−16 return 0s when read.
FUNCTION
15−8
PWRUP_DELAY_
PCMCIA
R
Power up delay for the PCMCIA socket. This register indicates how long the external power switch
takes to apply stable power to the PCMCIA socket in ms. Software must wait before starting
operation after power up. This field has no effect for the hardware.
7−0
RSVD
R
Reserved. Bits 7−0 return 0s when read.
9−17
9−18
10 Electrical Characteristics
10.1 Absolute Maximum Ratings Over Operating Temperature Ranges†
Supply voltage range, VR_PORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.2 V to 2.2 V
ANALOGVCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 4 V
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 4 V
PLLVCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 4 V
VCCCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 5.5 V
VCCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 5.5 V
Clamping voltage range, VCCP and VCCCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 6 V
Input voltage range, VI: PCI, CardBus, PHY, miscellaneous . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Output voltage range, VO: PCI, CardBus, PHY, miscellaneous . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Human Body Model (HBM) ESD performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 V
Operating free-air temperature, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
† Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Applies for external input and bidirectional buffers. VI > VCC does not apply to fail-safe terminals. PCI terminals and miscellaneous
terminals are measured with respect to VCCP instead of VCC. PC Card terminals are measured with respect to CardBus VCC. The
limit specified applies for a dc condition.
2. Applies for external output and bidirectional buffers. VO > VCC does not apply to fail-safe terminals. PCI terminals and miscellaneous
terminals are measured with respect to VCCP instead of VCC. PC Card terminals are measured with respect to CardBus VCC. The
limit specified applies for a dc condition.
10.2 Recommended Operating Conditions (see Note 3)
OPERATION
VR_PORT
MIN
NOM
MAX
UNIT
1.8 V
1.6
1.8
2
V
ANALOGVCC
3.3 V
3
3.3
3.6
V
VCC
3.3 V
3
3.3
3.6
V
PLLVCC
3.3 V
3
3.3
3.6
V
(see Table 2−4 for description)
3.3 V
VCCP
PCI and miscellaneous I/O clamp voltage
VCCCB
PC Card I/O clamp voltage
5V
3
3.3
3.6
4.75
5
5.25
3
3.3
3.6
4.75
5
5.25
3.3 V
5V
V
V
NOTE 3: Unused terminals (input or I/O) must be held high or low to prevent them from floating.
10−1
Recommended Operating Conditions (continued)
OPERATION
MIN
3.3 V
0.5 VCCP
PCI
5V
3.3 V CardBus
VIH†
High-level input
voltage
PC Card
3.3 V 16-bit
5 V 16-bit
PC(0−2)
VI
VO§
Input voltage
Output voltage
PC Card
2
2.4
3.3 V
0
5V
0
3.3 V CardBus
0
3.3 V 16-bit
0
5 V 16-bit
MAX
UNIT
VCCP
VCCP
V
VCC(A/B)
VCC(A/B)
V
VCC(A/B)
VCC
2
PCI
Low-level input voltage
2
0.475 VCC(A/B)
0.7 VCC
Miscellaneous‡
VIL†
NOM
VCC
V
0.8
V
0.325 VCC(A/B)
0.8
V
0
0.8
V
PC(0−2)
0
0.2 VCC
V
Miscellaneous‡
0
0.8
V
PCI
0
PC Card
Miscellaneous‡
0
0
VCC
PCI
0
PC Card
0
VCC
VCC
Miscellaneous‡
0
VCC
1
4
0
6
−5.6
1.3
VCCP
VCCCB
Input transition time
(tr and tf)
PCI and PC Card
Miscellaneous‡
IO
Output current
TPBIAS outputs
Differential input
voltage
Cable inputs during data reception
118
260
VID
Cable inputs during arbitration
168
265
Common-mode input
voltage
TPB cable inputs, source power node
0.4706
VIC
TPB cable inputs, nonsource power node
0.4706
2.515
2.015¶
tPU
Powerup reset time
GRST input
2
TPA, TPB cable inputs
Between TPA and TPB
cable inputs
V
V
ns
mA
mV
V
ms
±1.08
S100 operation
Receive input skew
V
0.3 VCCP
tt
Receive input jitter
V
S200 operation
±0.5
S400 operation
±0.315
S100 operation
±0.8
S200 operation
±0.55
S400 operation
±0.5
ns
ns
TA
Operating ambient temperature range
0
25
70
°C
TJ#
Virtual junction temperature
0
25
115
°C
† Applies to external inputs and bidirectional buffers without hysteresis
‡ Miscellaneous terminals are 1, 2, 12, 17, 111, 112, 125, 167, 181, and 187 for the PDV packaged device and B10, C09, D01, E03, F12, G03,
H02, L17, P17, and P18 for the GHK packaged device (CNA, SCL, SDA, SUSPEND, GRST, CDx, PHY_TEST_MA, and VSx terminals).
§ Applies to external output buffers
¶ For a node that does not source power, see Section 4.2.2.2 in IEEE Std 1394a−2000.
# These junction temperatures reflect simulation conditions. The customer is responsible for verifying junction temperature.
10−2
10.3 Electrical Characteristics Over Recommended Operating Conditions (unless
otherwise noted)
PARAMETER
TERMINALS
PCI
VOH
High-level output voltage
PC Card
OPERATION
IOH = −0.5 mA
5V
3.3 V CardBus
IOH = −2 mA
IOH = −0.15 mA
0.9 VCC
3.3 V 16-bit
IOH = −0.15 mA
2.4
5 V 16-bit
IOH = −0.15 mA
2.8
IOH = −4 mA
Low-level output voltage
PC Card
3.3 V CardBus
IOL = 0.7 mA
3.3 V 16-bit
IOL = 0.7 mA
5 V 16-bit
IOL = 0.7 mA
VCC−0.6
0.1 VCC
0.55
0.1 VCC
0.55
VO = VCC or GND
±20
3.6 V
VI = VCC
VI = VCC
−1
10
5.25 V
VI = VCC†
VI = VCC†
Input terminals
3.6 V
VI = GND
±20
I/O terminals
3.6 V
±20
PCI
3.6 V
VI = GND
VI = VCC‡
Others
3.6 V
VI = VCC‡
VI = VCC‡
±20
IOZL
High-impedance, low-level
output current
Output terminals
IOZH
High-impedance, high-level
output current
Output terminals
IIL
Low-level input current
5.25 V
3.6 V
3.6 V
Input terminals
I/O terminals
−1
25
µA
µA
A
µA
A
µA
A
±20
10
20
3.6 V
VI = VCC‡
VI = VCC‡
5.25 V
VI = VCC‡
25
5.25 V
V
0.4
3.6 V
Output terminals
High-level input current
V
0.5
3-state output high-impedance
IIH
V
IOL = 4 mA
IOZ
UNIT
2.4
IOL = 6 mA
5V
Miscellaneous§
MAX
0.9 VCC
IOL = 1.5 mA
3.3 V
VOL
MIN
3.3 V
Miscellaneous§
PCI
TEST CONDITIONS
µA
10
† For PCI and miscellaneous terminals, VI = VCCP. For PC Card terminals, VI = VCC(A/B).
‡ For I/O terminals, input leakage (IIL and IIH) includes IOZ leakage of the disabled output.
§ Miscellaneous terminals are 1, 2, 12, 17, 111, 112, 125, 167, 181, and 187 for the PDV packaged device and B10, C09, D01, E03, F12, G03,
H02, L17, P17, and P18 for the GHK packaged device (CNA, SCL, SDA, SUSPEND, GRST, CDx, PHY_TEST_MA, and VSx terminals).
10.4 Electrical Characteristics Over Recommended Ranges of Operating Conditions
(unless otherwise noted)
10.4.1 Device
PARAMETER
TEST CONDITION
VTH
VO
Power status threshold, CPS input†
400-kΩ resistor†
TPBIAS output voltage
At rated IO current
II
Input current (PC0−PC2 inputs)
VCC = 3.6 V
MIN
MAX
4.7
7.5
UNIT
1.665
2.015
V
5
µA
V
† Measured at cable power side of resistor.
10−3
10.4.2 Driver
PARAMETER
TEST CONDITION
VOD
IDIFF
Differential output voltage
56 Ω,
Driver difference current, TPA+, TPA−, TPB+, TPB−
Drivers enabled, speed signaling off
ISP200
ISP400
Common-mode speed signaling current, TPB+, TPB−
S200 speed signaling enabled
Common-mode speed signaling current, TPB+, TPB−
S400 speed signaling enabled
See Figure 10−1
MIN
MAX
UNIT
172
−1.05†
265
1.05†
mV
−4.84‡
−12.4‡
−2.53‡
−8.10‡
mA
mA
mA
VOFF
Off state differential voltage
Drivers disabled,
See Figure 10−1
20
mV
† Limits defined as algebraic sum of TPA+ and TPA− driver currents. Limits also apply to TPB+ and TPB− algebraic sum of driver currents.
‡ Limits defined as absolute limit of each of TPB+ and TPB− driver currents.
TPAx+
TPBx+
56 Ω
TPAx−
TPBx−
Figure 10−1. Test Load Diagram
10.4.3 Receiver
PARAMETER
TEST CONDITION
MIN
TYP
4
7
MAX
UNIT
kΩ
ZID
Differential impedance
Drivers disabled
ZIC
Common-mode impedance
Drivers disabled
VTH−R
VTH−CB
Receiver input threshold voltage
Drivers disabled
−30
Cable bias detect threshold, TPBx cable inputs
Drivers disabled
0.6
1.0
V
VTH+
VTH−
Positive arbitration comparator threshold voltage
Drivers disabled
89
168
mV
Negative arbitration comparator threshold voltage
Drivers disabled
−168
−89
mV
VTH−SP200
VTH−SP400
Speed signal threshold
TPBIAS−TPA common mode
voltage, drivers disabled
49
131
mV
314
396
mV
4
20
Speed signal threshold
pF
kΩ
24
pF
30
mV
10.5 PCI Clock/Reset Timing Requirements Over Recommended Ranges of Supply
Voltage and Operating Free-Air Temperature
PARAMETER
tc
tw(H)
Cycle time, PCLK
tw(L)
tr, tf
tw
tsu
Pulse duration (width), GRST
10−4
ALTERNATE
SYMBOL
TEST CONDITIONS
MIN
MAX
UNIT
30
ns
11
ns
Pulse duration (width), PCLK low
tcyc
thigh
tlow
11
ns
Slew rate, PCLK
∆v/∆t
1
trst
1
ms
100
ms
Pulse duration (width), PCLK high
Setup time, PCLK active at end of PRST
trst-clk
4
V/ns
10.6 Switching Characteristics for PHY Port Interface
PARAMETER
tr
tf
TEST CONDITIONS
MIN
Jitter, transmit
Between TPA and TPB
Skew, transmit
Between TPA and TPB
TP differential rise time, transmit
10% to 90%, at 1394 connector
0.5
TP differential fall time, transmit
90% to 10%, at 1394 connector
0.5
TYP
MAX
UNIT
± 0.15
ns
± 0.10
ns
1.2
ns
1.2
ns
10.7 Operating, Timing, and Switching Characteristics of XI
PARAMETER
VDD
VIH
High-level input voltage
VIL
Low-level input voltage
MIN
3.0
TYP
MAX
3.3
3.6
UNIT
V (PLLVCC)
0.63 VCC
V
0.33 VCC
Input clock frequency
V
24.576
MHz
Input clock frequency tolerance
Input slew rate
Input clock duty cycle
<100
PPM
0.2
4
V/ns
40%
60%
10.8 PCI Timing Requirements Over Recommended Ranges of Supply Voltage and
Operating Free-Air Temperature
This data manual uses the following conventions to describe time ( t ) intervals. The format is tA, where subscript A
indicates the type of dynamic parameter being represented. One of the following is used: tpd = propagation delay time,
td (ten, tdis) = delay time, tsu = setup time, and th = hold time.
ALTERNATE
SYMBOL
PARAMETER
tpd
Propagation delay time, See Note 4
PCLK-to-shared signal
valid delay time
tval
PCLK-to-shared signal
invalid delay time
tinv
ten
tdis
Enable time, high impedance-to-active delay time from PCLK
tsu
th
Setup time before PCLK valid
Disable time, active-to-high impedance delay time from PCLK
Hold time after PCLK high
TEST CONDITIONS
MIN
CL = 50 pF,
See Note 4
MAX
UNIT
11
ns
2
ton
toff
2
ns
tsu
th
7
ns
0
ns
28
ns
NOTE 4: PCI shared signals are AD31−AD0, C/BE3−C/BE0, FRAME, TRDY, IRDY, STOP, IDSEL, DEVSEL, and PAR.
10−5
10−6
11 Mechanical Information
The PCI6x21/PCI6x11 device is available in the 288-terminal MicroStar BGA package (GHK) or the 288-terminal
lead (Pb atomic number 82) free MicroStar BGA package (ZHK). The following figure shows the mechanical
dimensions for the GHK package. The GHK and ZHK packages are mechanically identical; therefore, only the GHK
mechanical drawing is shown.
GHK (S-PBGA-N288)
PLASTIC BALL GRID ARRAY
16,10
SQ
15,90
14,40 TYP
0,80
W
V
U
T
R
P
N
M
L
K
J
H
G
F
E
D
C
B
A
0,80
3
1
A1 Corner
2
5
4
7
6
0,95
11
9
8
10
13
12
15
14
19
17
16
18
Bottom View
0,85
1,40 MAX
Seating Plane
0,55
0,45
0,08
0,45
0,35
0,12
4145273-4/E 08/02
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. MicroStar BGA configuration.
MicroStar BGA is a trademark of Texas Instruments.
11−1
11−2