2SC5277A Ordering number : ENA1075A SANYO Semiconductors DATA SHEET NPN Epitaxial Planar Silicon Transistor 2SC5277A UHF to S-Band Low-Noise Amplifier OSC Applications Features • • • • • Low-noise : NF=0.9dB typ (f=1GHz) : NF=1.4dB typ (f=1.5GHz) High gain : ⏐S21e⏐2=10dB typ (f=1.5GHz) High cut-off frequency : fT=8GHz typ Low-voltage, low-current operation (VCE=1V, IC=1mA) : fT=3.5GHz typ : ⏐S21e⏐2=5.5dB typ (f=1.5GHz) Ultrasmall-sized package permitting applied sets to be made small and slim Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCEO 20 V 10 V VEBO IC 1.5 V 30 mA PC Tj 100 mW Junction Temperature Storage Temperature Tstg Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Dissipation 150 °C --55 to +150 °C Package Dimensions Product & Package Information unit : mm (typ) 7027A-002 • Package : SMCP • JEITA, JEDEC : SC-75, SOT-416 • Minimum Packing Quantity : 3,000 pcs./reel 0.1 3 0.8 TL 2 0.2 0.6 0.5 0.5 0 to 0.1 D RANK 0.4 Marking LOT No. 1 0.75 Packing Type: TL LOT No. 1.6 0.4 0.3 0.1 MIN 2SC5277A-2-TL-E 1.6 Electrical Connection 1 : Base 2 : Emitter 3 : Collector 3 SANYO : SMCP 1 2 http://www.sanyosemi.com/en/network/ 82212 TKIM/O2908AB MSIM TC-00001687 No. A1075-1/8 2SC5277A Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product ICBO IEBO VCB=10V, IE=0A VEB=1V, IC=0A hFE fT1 VCE=5V, IC=10mA VCE=5V, IC=10mA fT2 VCE=1V, IC=1mA Output Capacitance Cob Reverse Transfer Capacitance Cre Forward Transfer Gain Noise Figure Ratings Conditions min typ Unit max 60* 1.0 μA 10 μA 270* 5 8 GHz 3.5 GHz 0.45 VCB=10V, f=1MHz 0.7 pF 0.30 pF 10 dB 2 ⏐S21e⏐ 1 VCE=5V, IC=10mA, f=1.5GHz 2 ⏐S21e⏐ 2 VCE=1V, IC=1mA, f=1.5GHz 5.5 NF1 VCE=5V, IC=5mA, f=1.5GHz 1.4 NF2 VCE=2V, IC=3mA, f=1GHz 0.9 8 dB 3.0 dB dB * : The 2SC5277A is classified by 10mA hFE as follows : Rank hFE 1 60 to 120 2 90 to 180 3 135 to 270 Ordering Information Device Package Shipping memo SMCP 3,000pcs./reel Pb Free 2SC5277A-2-TL-E hFE -- IC 5 Gain-Bandwidth Product, fT -- GHz 3 DC Current Gain, hFE 2 100 7 5 3 2 10 fT -- IC 2 VCE=5V 10 =5V VCE =1V VCE 7 5 3 2 7 5 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector Current, IC -- mA 2 3 5 7 100 ITR08213 1.0 1.0 2 3 5 7 10 Collector Current, IC -- mA 2 3 5 IT14098 No. A1075-2/8 2SC5277A Cob -- VCB 5 Reverse Transfer Capacitance, Cre -- pF Output Capacitance, Cre -- pF 3 2 1.0 7 5 3 2 0.1 7 5 7 0.1 f=1MHz 3 2 1.0 7 5 3 2 0.1 7 5 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Base Voltage, VCB -- V 3 5 7 0.1 2 3 5 7 1.0 3 2 5 7 10 2 Collector-to-Base Voltage, VCB -- V ITR08215 NF -- IC 12 VCE=2V f=1GHz Noise Figure, NF -- dB 8 V CE = 1V 4 2 3 5 7 1.0 2 3 5V 6 0 0.1 8 6 4 2 5 7 10 2 Collector Current, IC -- mA ⏐S21e⏐2 -- I 3 0 0.1 5 2 3 5 7 1.0 2 3 5 7 2 10 Collector Current, IC -- mA ⏐S21e⏐2 -- I ITR08217 C 16 f=1GHz Forward Transfer Gain, ⏐S21e⏐2 -- dB 8 6 4 2 12 2V 1V =5V VCE V 2 1V 10 14 =5V VCE 12 5 C 16 14 3 ITR08218 f=1.5GHz Forward Transfer Gain, ⏐S21e⏐2 -- dB 5 10 2 10 8 6 4 2 0 0 3 5 7 1.0 2 3 5 7 10 2 Collector Current, IC -- mA 3 5 7 100 ITR08219 PC -- Ta 120 Collector Dissipation, PC -- mW 3 ITR08216 NF -- IC 12 f=1.5GHz 10 Noise Figure, NF -- dB Cre -- VCB 5 f=1MHz 3 5 7 1.0 2 3 5 7 10 2 Collector Current, IC -- mA 3 5 7 100 ITR08220 100 80 60 40 20 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 ITR08221 No. A1075-3/8 2SC5277A S11e f=200MHz to 2000MHz(200MHz Step) S21e f=200MHz to 2000MHz(200MHz Step) 120° j25 j100 j150 V =5 E mA VC 5 = IC V =5 E mA V C =10 IC 2.0GHz z 2.0GHGHz 2.0 0GHz 2. z 100 150 250 50 Hz 0.2 G 0.2 Hz GH 0.2z GH --j10 --j250 --j200 --j150 --j25 V IC CE =1 =1 V mA VCE=2V IC=3mA 0.04 0.08 0.12 0.16 0.2 0 ±180° --30° --150° --j100 --60° --120° --j50 --90° ITR08222 S12e f=200MHz to 2000MHz(200MHz Step) S22e f=200MHz to 2000MHz(200MHz Step) 90° j50 60° 120° j25 j150 j200 j250 j10 GH 150 z GH z z 2.0.0GH 2 z GH 2.0 GH V z C IC E =1 =1 V mA j100 30° 2.0 V CE = 0.2GHz IC =1 5V 0m A 150° =5V VCE A m I C=5 Hz G 0.2 =2V ±180° V CE mA z 3 H I C= 2G . 0 0.2 ITR08223 4 8 12 16 20 0 0 10 --j10 --30° --150° --j25 25 VCE =5V 250 100 50 IC =5mA VCE =5 V IC =10m A 2.0GHz 2.0GHz --j250 z --j200 2.0GH V z V CE=1 --j150 2.0GH A m 1 = I VCE=2V C --j100 IC=3mA 0.2GH 0.2GHz z 0.2 0.2G GH Hz z 10 0.2 G 0 60° 2.0 GH VC = E 1V z V IC =1mA 30° =2 A E V C =3m IC 150° j200 j250 25 j10 V IC CE = = 5 5V 0.2 0.2 0 m A GH GH .2G z z Hz 0.2 V GH C IC = E =5V z 10m A 2.0 GH z 2.0 GH 2.0 z GH z 90° j50 --60° --120° --90° ITR08224 --j50 ITR08225 No. A1075-4/8 2SC5277A S Parameters (Common emitter) VCE=5V, IC=5mA, ZO=50Ω Freq(MHz) 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.782 0.623 0.502 0.420 0.369 0.339 0.311 0.296 0.285 0.277 ∠S11 -37.1 -65.4 -85.6 -102.4 -114.7 -127.2 -137.2 -144.9 -156.5 -164.2 ⏐S21⏐ 12.043 9.431 7.415 6.000 5.025 4.323 3.785 3.391 3.018 2.767 ∠S21 148.4 126.6 112.2 101.5 93.6 86.7 80.6 75.3 70.1 65.7 ⏐S12⏐ 0.038 0.057 0.072 0.083 0.094 0.105 0.115 0.127 0.139 0.150 ∠S12 69.7 60.8 56.5 55.2 55.1 55.6 55.6 56.7 56.4 56.7 ⏐S22⏐ 0.889 0.758 0.646 0.577 0.538 0.513 0.490 0.480 0.466 0.460 ∠S22 -19.5 -28.3 -33.3 -35.9 -37.6 -38.7 -39.7 -41.3 -43.5 -45.5 ∠S11 -52.7 -85.4 -106.6 -124.1 -136.1 -146.7 -156.6 -163.2 173.5 179.8 ⏐S21⏐ 16.527 11.299 8.303 6.502 5.342 4.546 3.947 3.527 3.121 2.864 ∠S21 137.8 115.7 103.1 94.0 87.4 81.4 76.4 71.4 67.0 62.8 ⏐S12⏐ 0.031 0.048 0.060 0.072 0.084 0.097 0.108 0.123 0.136 0.150 ∠S12 67.4 60.5 60.0 60.9 61.9 62.7 63.0 63.7 62.8 62.4 ⏐S22⏐ 0.820 0.643 0.549 0.499 0.477 0.462 0.449 0.444 0.435 0.434 ∠S22 -22.9 -30.2 -32.2 -33.2 -33.9 -35.0 -36.2 -37.8 -39.9 -42.4 ∠S11 -30.4 -55.7 -76.1 -93.0 -106.1 -118.6 -129.4 -138.0 -148.8 -157.7 ⏐S21⏐ 8.644 7.310 6.083 5.085 4.343 3.806 3.349 3.036 2.685 2.479 ∠S21 154.1 133.8 118.6 106.9 98.1 90.0 83.3 77.5 71.7 66.7 ⏐S12⏐ 0.042 0.073 0.093 0.107 0.118 0.128 0.137 0.147 0.157 0.167 ∠S12 73.0 61.3 54.2 50.4 48.3 47.5 46.9 47.4 47.2 47.6 ⏐S22⏐ 0.937 0.820 0.709 0.628 0.572 0.536 0.506 0.485 0.463 0.453 ∠S22 -16.4 -27.9 -35.7 -40.4 -43.7 -45.8 -47.3 -49.5 -51.9 -54.1 ∠S11 -18.7 -36.9 -52.9 -67.9 -81.1 -94.3 -104.9 -114.1 -124.4 -134.9 ⏐S21⏐ 3.431 3.263 3.004 2.765 2.539 2.366 2.143 1.969 1.797 1.701 ∠S21 162.9 147.1 133.2 120.4 109.9 99.8 91.2 83.6 76.2 69.7 ⏐S12⏐ 0.053 0.099 0.136 0.164 0.184 0.199 0.207 0.213 0.218 0.219 ∠S12 78.1 66.9 57.5 49.7 43.4 38.4 34.1 31.7 28.7 27.0 ⏐S22⏐ 0.982 0.939 0.879 0.815 0.758 0.727 0.683 0.653 0.621 0.601 ∠S22 -10.3 -19.7 -27.7 -34.8 -40.0 -44.3 -47.8 -51.4 -54.9 -58.1 VCE=5V, IC=10mA, ZO=50Ω Freq(MHz) 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.641 0.468 0.377 0.321 0.293 0.280 0.266 0.263 0.263 0.264 VCE=2V, IC=3mA, ZO=50Ω Freq(MHz) 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.851 0.724 0.612 0.521 0.461 0.423 0.382 0.366 0.341 0.333 VCE=1V, IC=1mA, ZO=50Ω Freq(MHz) 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.945 0.892 0.826 0.754 0.691 0.639 0.589 0.558 0.522 0.490 No. A1075-5/8 2SC5277A Embossed Taping Specification 2SC5277A-2-TL-E No. A1075-6/8 2SC5277A Outline Drawing 2SC5277A-2-TL-E Land Pattern Example Mass (g) Unit 0.003 mm * For reference Unit: mm 0.7 1.3 0.7 0.7 0.6 0.5 0.5 No. A1075-7/8 2SC5277A Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2012. Specifications and information herein are subject to change without notice. PS No. A1075-8/8