1SV249 Ordering number : EN4401B SANYO Semiconductors DATA SHEET 1SV249 Silicon Epitaxial Type PIN Diode for VHF, UHF, AGC Applications Features • • • Very small-sized package facilitates high-density mounting and permits 1SV249-applied equipment to be made smaller Small interterminal capacitance (C=0.23pF typ) Small forward series resistance (rs=4.5Ω max) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Reverse Voltage Conditions Ratings VR IF Forward Current Unit 50 V 50 mA mW Allowable Power Dissipation P 100 Junction Temperature Tj 125 °C Storage Temperature Tstg --55 to +125 °C Package Dimensions Product & Package Information unit : mm (typ) 7023A-007 • Package : MCP • JEITA, JEDEC : SC-70, SOT-323 • Minimum Packing Quantity : 3,000 pcs./reel 1SV249-TL-E 0.2 0.15 3 Packing Type: TL Marking 0 to 0.08 1.25 2.1 0.425 2.0 LOT No. 2 0.65 0.9 LOT No. TL 0.3 Electrical Connection 0.3 0.425 GV 1 1 : Anode 2 : Cathode 3 : Cathode / Anode 3 SANYO : MCP 1 2 http://semicon.sanyo.com/en/network 72512 TKIM/41098HA (KT)/53196GI/40593YH (KOTO) AX-8285 No.4401-1/6 1SV249 Electrical Characteristics at Ta=25°C Parameter Reverse Voltage Symbol Conditions Forward Voltage VR IR VF Interterminal Capacitance C IF=50mA VR=50V, f=1MHz Series Resistance rs IF=10mA, f=100MHz Reverse Current IR=10μA VR=50V Ratings min typ max 50 Unit V 0.1 μA 0.92 V 0.23 pF 4.5 Ω Note : The specifications shown above are for each individual diode. Ordering Information Device 1SV249-TL-E Package Shipping memo MCP 3,000pcs./reel Pb Free No.4401-2/6 1SV249 IF -- VF Interterminal Capacitance, C -- pF °C 3 2 25 1.0 7 5 --55 °C 25° C 3 2 0.1 7 5 3 2 0.2 0.4 0.6 0.8 1.0 Forward Voltage, VF -- V 1.2 5 3 2 2 3 5 7 1.0 2 3 5 7 2 10 Reverse Voltage, VR -- V ID00052 IR -- VR 5 Ta=25°C f=1MHz 7 0.1 0.1 0.01 0 C -- VR 1.0 10 7 5 Ta =1 Forward Current, IF -- mA 5 3 2 5 7 100 ID00053 rs -- f 5 3 3 Ta=25°C 3 2 2 5°C 7 Ta= 10 7 7 5 5 3 3 Series Resistance, rs -- Ω Reverse Current, IR -- nA IF =10μ A 1000 2 50°C 1.0 7 5 3 100μA 2 100 7 5 3 1mA 2 2 25°C 0.1 10 7 7 5 5 3 2 0 10 20 30 40 50 Reverse Voltage, VR -- V 60 ID00054 2 1.0 2 3 5 7 10 2 3 5 7 100 Frequency, f -- MHz 2 3 5 71000 2 ID00055 rs -- IF 1k 7 5 Series Resistance, rs -- Ω 10mA 3 Ta=25°C f=100MHz 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Forward Current, IF -- mA 2 3 5 7 10 ID00056 No.4401-3/6 1SV249 Embossed Taping Specification 1SV249-TL-E No.4401-4/6 1SV249 Outline Drawing 1SV249-TL-E Land Pattern Example Mass (g) Unit 0.006 mm * For reference Unit: mm 2.1 1.0 0.7 0.65 0.65 No.4401-5/6 1SV249 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of July, 2012. Specifications and information herein are subject to change without notice. PS No.4401-6/6