SANYO EN7618B

SVC276
Ordering number : EN7618B
SANYO Semiconductors
DATA SHEET
SVC276
Diffused Junction Type Silicon Diode
FM Receiver Electronic Tuning Applications
Features
•
•
•
•
Twin type with a good linearity of C-V characteristic. Excels in large input characteristic
Small package permits SVC276-applied sets to be compact and slim
High capacitance ratio (VR=2.0 to 8.0V)
High Quality Factor
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Reverse Voltage
Junction Temperature
VR
Tj
Storage Temperature
Tstg
Conditions
Ratings
V
125
°C
--55 to +125
°C
Package Dimensions
Product & Package Information
unit : mm (typ)
7019A-002
• Package
: MCPH3
• JEITA, JEDEC
: SC-70, SOT-323
• Minimum Packing Quantity : 3,000 pcs./reel
SVC276-TL-E
0.15
0.25
2.0
Packing Type : TL
1.6
0 to 0.02
V3
LOT No.
TL
0.25
1
0.65
2
Electrical Connection
0.3
3
0.07
0.85
2.1
Marking
LOT No.
3
Unit
16
1 : Anode
2 : Anode
3 : Cathode
SANYO : MCPH3
1
2
http://semicon.sanyo.com/en/network
72512 TKIM/80608VA TIIM TC-00001541/90503 TSIM TA-100655 No.7618-1/6
SVC276
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Breakdown Voltage
Ratings
Conditions
Reverse Current
V(BR)R
IR
C2.0V
IR=10μA
VR=10V
VR=2.0V, f=1MHz
Interterminal Capacitance*
C6.0V
VR=6.0V, f=1MHz
C8.0V
VR=8.0V, f=1MHz
Quality Factor
Q
Capacitance Ratio
CR
VR=2.0V, f=100MHz
C2.0V / C8.0V
min
typ
Unit
max
16
V
50
nA
73.72
79.77
pF
25.50
33.61
pF
18.04
23.78
pF
100
3.1
Note)* : Capacitance value per each diode
Ordering Information
Device
SVC276-TL-E
Package
Shipping
memo
MCPH3
3,000pcs./reel
Pb Free
C, Q -- VR
1000
1000
VRF=20mVrms
7
7
5
5
z)
H
00M
Interterminal Capacitance, C -- pF
3
2
2
100
100
7
7
5
5
C(f
=1M
3
Hz)
Quality factor, Q
=1
Q(f
3
3
2
2
10
10
0
1
2
3
4
5
6
Reverse Voltage, VR -- V
7
8
9
10
IT06455
No.7618-2/6
SVC276
C -- Ta
1.03
f=1MHz
VRF=20mVrms
2V
4V
6V
8V
1.02
Capacitance Ratio
1.01
1.00
0.99
0.98
0.97
--75
8V
6V
4V
2V
--50
--25
0
25
50
Ambient Temperature, Ta -- °C
75
100
125
150
IT06456
No.7618-3/6
SVC276
Taping Specification
SVC276-TL-E
No.7618-4/6
SVC276
Outline Drawing
SVC276-TL-E
Land Pattern Example
Mass (g) Unit
0.007 mm
* For reference
Unit: mm
2.1
0.6
0.4
0.65 0.65
No.7618-5/6
SVC276
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for new introduction or other application
different from current conditions on the usage of automotive device, communication device, office equipment,
industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.)
prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be
solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer' s
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature,
high current, high voltage, or drastic temperature change, even if it is used within the range of absolute
maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a
confirmation.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of July, 2012. Specifications and information herein are subject
to change without notice.
PS No.7618-6/6