AC7MDT10-D32/S28 SDIP32/SO28 Connection Kit for ST7MDT10-EMU3 DATA BRIEF The SDIP32/SO28 Connection Kit (AC7MDT10D32/S28) provides the hardware you need to connect your ST7MDT10-EMU3 emulator to your application when debugging applications for ST7 microcontrollers in SDIP32 and SO28 packages. Connection Kit Contents ■ SDIP32 adapter (DB510) – Allows the connection of your ST7MDT10-EMU3 emulator to your application board in place of your ST7. ■ SDIP32-SO28 device adapter (DB359) – Adapts the SDIP32 adapter to SO28 footprint of the ST7 on your application board. Figure 2. SDIP32 application connection Pin 1 Indicators 2. Plug the SDIP32 adapter into the W2 connector on the target emulation board of your ST7MDT10-EM3. 3. Align pin 1 indicators, then insert the pins of the SDIP32 adapter into the socket on the application board. Application board For more information... ■ ST7-EMU3 User Manual – Information common to all EMU3 series emulators ■ ST7MDT10-EMU3 Probe User Guide – Information specific to ST7MDT10-EMU3 1. Solder socket on to the application board. Figure 3. Figure 1. SDIP32 adapter SDIP32 to SO28 device adapter SDIP32 adapter (DB510) SDIP32 adapter (DB510) SO28 device adapter (DB359) November 2005 Rev 1 1/3 www.st.com 3 AC7MDT10-D32/S28 Figure 4. SO28 application board connection 1. Solder the connection pins to your 2. Plug the SDIP32 adapter application board in place of your MCU. When soldering, insert the connection pins into the device adapter, which serves as a support to ensure correct alignment. into the W2 connector on the target emulation board of your ST7MDT10-EM3. Pin 1 Indicators 3. Align pin 1 indicators, then insert the pins of the SDIP32 adapter into the SDIP32SO28 device adapter. Application board Revision history Date Revision 14-November-2005 1 2/3 Changes Initial release. AC7MDT10-D32/S28 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 3/3