TDK CXA-K0505-VJL

(1/2)
001-01 / 20030905 / ea441_cxak0505.fm
CXA Series CXA-K0505-VJL
Power Supplies
DC to AC Inverters
Connector type, Dimming, 2W, For 1 Bulb
FEATURES
• The CXA-K0505-VJL is an inverter for cold cathode fluorescent
lamps and features a built-in dimmer.
• Because they employ advanced output current control, fluctuations in input voltage, load, and distributed capacitance have virtually no effect on brightness.
• Output open and short circuit conditions result in no damage,
heat generation, or other difficulties.
• The bottom of the board has a flat structure that facilitates insulation.
• These parts are ultra-thin with a maximum thickness of only
6.3mm.
TEMPERATURE AND HUMIDITY RANGES
Operating 0 to +60
Storage
–30 to +85
95max.
Humidity range(%)RH
[Maximum wet-bulb temperature 38°C]
Temperature range
(°C)
• Safe design that includes a built-in overcurrent protection element.
SHAPES AND DIMENSIONS
87max.
(6)
2-ø2.2±0.2
CN1
1-1
CN2
2-3
11±0.2
16.5max.
(2.5)
68±0.2
2-1
1-5
PWB∗1
2
6.3max.
1
50∗2
∗1 Substrate (PWB: Printed wiring board): Flame retardant material 94V-0(FR-4 or CEM-3) t =0.8mm
∗2
: High-voltage generator (The entire surface within a range of 50mm away from the end of the base
in the output)
1
2
Input connector
Output connector
Connector manufacturer’s company and type
Morex Japan Co., Ltd.
Japan Solderless Terminal Co., Ltd.
TERMINAL NUMBERS AND FUNCTIONS
CN1
Terminal No.
CN1-1
CN1-2
CN1-3
CN1-4
CN1-5
∗ Brightness
Functions
Input voltage Edc: 5 to 12V 5V[nom.]
0V
Remote voltage Edc 0V: off/5 to 12V:on
Brightness dimmer voltage∗
Edc: 0 to 3V(Maximum brightness on 0V)
Used in the internal circuits, do not connect.
Symbol
Vin
GND
Vrmt
Vbr
N.C.
can be controlled by adjusting Vbr within a range of 0 to 3V.
CN2
Terminal No.
CN2-1
CN2-2
CN2-3
Functions
Output[High voltage] Irms
—
Output[Low voltage]
2 to 5mA
—
(2V)
• All specifications are subject to change without notice.
Symbol
VHIGH
N.C.
VLOW
53261-0590
SM02(8.0)B-BHS-1
Weight: 9g typ.
Dimensions in mm
Symbol
CN1
CN2
(2/2)
001-01 / 20030905 / ea441_cxak0505.fm
CXA Series CXA-K0505-VJL
Power Supplies
DC to AC Inverters
Connector type, Dimming, 2W, For 1 Bulb
ELECTRICAL CHARACTERISTICS
Items
Unit
Symbol
Output current Irms
mA
Iout
Input current Idc
Oscillation frequency
Open circuit output voltage Erms
A
kHz
V
Iin
FL
Vopen
Specifications
min.
typ.
4.1
5
4.5
5
1.5
2
—
0.5
35
40
900
1100
TYPICAL CONNECTIONS
EXAMPLE OF VOLTAGE DIMMER CONTROL
Vrmt∗1
5 to 12V
RL
(CCFL)
CN1-3
b
CN1-4
Vbr
0 to 3V
CN1-5
CN2-3
EXAMPLE OF POTENTIOMETER DIMMER CONTROL
CN1-1
Vin
5 to12V
b
Vbr
3V
ex.
CN1-4
CN1-5
CN2-3
CN1-1
CN2-1
NO DIMMER CONTROL
Vin
5 to 12V
CN1-2
RL
(CCFL)
CN1-3
CN1-4
CN1-5
∗1
∗2
CN2-3
Vrmt (remote voltage) shall be ON after Vin was ON.
SW a:on, b:off
• All specifications are subject to change without notice.
5
4
3
2
1
0
RL
(CCFL)
CN1-3
50kΩ
Vrmt∗1
5 to 12V
CN2-1
CN1-2
a SW∗2
Ta(°C)
0 to +50
23±5
23±5
0 to +50
0 to +50
0 to +50
6
CN2-1
CN1-2
a SW∗2
Vbr(V)
0
0
3
0
0
0
RL(kΩ)
60 to 80
70
140
60 to 80
60 to 80
∞
Brightness
Maximum
Maximum
Minimum
BRIGHTNESS DIMMER VOLTAGE-OUTPUT CURRENT
CHARACTERISTICS
Output current Iout(mA)
CN1-1
Vin
5 to 12V
Conditions
Vin(V)
5 to 12
5
5
5 to 12
5 to 12
5 to 12
max.
5.9
5.5
2.5
0.66
45
—
0
1
2
3
4
5
6
Brightness dimmer voltage Vbr(V)