UNISONIC TECHNOLOGIES CO., LTD 12N10 Preliminary Power MOSFET 12A, 100V N-CHANNEL POWER MOSFET DESCRIPTION 1 The UTC UT12N10 is an N-channel mode power MOSFET using UTC’s advanced technology to provide customers with minimum on-state resistance for extremely high dense cell design, rugged avalanche characteristics and less critical alignment steps . TO-252 FEATURES * RDS(on) < 0.10Ω @VGS = 10 V * RDS(on) < 0.12Ω @VGS = 5.0 V * High switching speed * Low gate charge SYMBOL 2.Drain 1.Gate 3.Source ORDERING INFORMATION Ordering Number Lead Free Halogen Free 12N10L-TN3-R 12N10G-TN3-R 12N10L-TN3-T 12N10G-TN3-T www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Package TO-252 TO-252 1 G G Pin Assignment 2 3 D S D S Packing Tape Reel Tube 1 of 5 QW-R502-737.a 12N10 Preliminary Power MOSFET ABSOLUTE MAXIMUM RATINGS(TC = 25°C, unless otherwise specified) PARAMETER Drain-Source Voltage (VGS=0) Gate-Source Voltage RATINGS UNIT 100 V ±20 V 12 A TC = 25°C ID Continuous Drain Current TC = 100°C 8.5 A Pulsed (Note 2) IDM 48 A 30 W Power Dissipation Derating Factor 0.2 W/°C PD Avalanche Energy (Note 3) EAS 100 mJ Junction Temperature TJ +150 °C Storage Temperature TSTG -55 ~ +150 °C Note: 1 Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Pulse width limited by safe operating area 3. Starting TJ = 25°C, ID = 12A, VDD = 50V SYMBOL VDSS VGSS THERMAL DATA PARAMETER Junction to Ambient Junction to Case SYMBOL θJA θJC RATINGS 100 5 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Drain-Source Breakdown Voltage Drain-Source Leakage Current Forward Gate- Source Leakage Current Reverse ON CHARACTERISTICS Gate Threshold Voltage Static Drain-Source On-State Resistance DYNAMIC PARAMETERS Input Capacitance Output Capacitance Reverse Transfer Capacitance SYMBOL BVDSS IDSS IGSS VGS(TH) RDS(ON) CISS COSS CRSS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS ID=250µA, VGS=0V VDS=Max rating, VGS=0V VGS=+20V, VDS=0V VGS=-20V, VDS=0V VDS=VGS, ID=250µA VGS=10V, ID=6A VGS=0V, VDS=25V, f=1.0MHz MIN TYP MAX UNIT 100 1 V 1 µA +100 nA -100 nA 3 0.15 0.18 V Ω 430 90 20 pF pF pF 2 of 5 QW-R502-737.a 12N10 Preliminary Power MOSFET ELECTRICAL CHARACTERISTICS(Cont.) PARAMETER SYMBOL TEST CONDITIONS SWITCHING PARAMETERS (Note 1,2) Total Gate Charge QG VGS=10V, VDD=80V, ID=12A Gate to Source Charge QGS Gate to Drain Charge QGD Turn-ON Delay Time tD(ON) Rise Time tR VDD=30V, ID=1A, RG=9.1Ω, VGS=10V (Fig. 1) Turn-OFF Delay Time tD(OFF) Fall-Time tF SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Maximum Body-Diode Continuous Current IS Maximum Body-Diode Pulsed Current ISM Drain-Source Diode Forward Voltage VSD IS=12A, VGS=0V (Note 1) Notes: 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 2. Essentially independent of operating temperature UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 7.5 2.5 3.0 12 7 18 3 10 24 14 35 6 nC nC nC ns ns ns ns 12 48 A A 1.2 V 3 of 5 QW-R502-737.a 12N10 Preliminary Power MOSFET TEST CIRCUITS AND WAVEFORMS VDD D D. U. T G S 25Ω A A FAST DIODE B B RG + VDD A L=100µH 1000µF VD 3.3µF D S - Fig. 3 Test Circuit for Inductive Load Switching and Diode Recovery Times UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2200µF ID D. U. T G 3.3µF L B VI D. U. T PW Fig. 4 Unclamped Inductive Load Test Circuit 4 of 5 QW-R502-737.a 12N10 Preliminary Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-737.a